Linksys Wireless Router :: E2000 Setup Near Modem In A Room

Dec 25, 2011

So my family has an E2000 setup near the modem in a room that litterally is a DEADZONE, signal bearly gets in or out of this room. I've argued until I was blue in the face that  we ned to rewire the internets inlet to the house in to another room that isn't a deadzone and rune a router from there.They IT disadvantaged refused. We have also an E2500 they say hook it up, maybe it will work better (when your in a concrete and mettal room with a router sitting on a shelf surrounded by book and with a corless phone system hooks up and sitting on top of it... its jsut not going to work. is there a way i can take the E2500 and make it an access point for the E2000? 
 
I figure if I can I would take the E2500 and put int in a better location and jsut have it relay the E2000 internet. Because of the IT limited thought process of most of the people living here I'd prefer that they share the same SSID or atleast make for a simple transition for the apes I live with.

View 6 Replies


ADVERTISEMENT

Linksys Wireless Router :: E2000 Setup With Motorola Surfboard Cable Modem

Jun 10, 2011

I recently switched from dsl to cable. I have a e2000 router that I would still like to use. The modem I have is a Motorola Surfboard SB6121. It has no options that I can modify. The modem has a built in DHCP server. However, I can't modify it and I don't like the ip configuration it uses. For the time being I have the modem connected to a switch which is working fine. What I would like to know is how to configure the e2000 to use the modems connection. I used PPPoE for DSL and had login information.

View 2 Replies View Related

Linksys Wireless Router :: E2000 Can't Setup To Use Wifi

Jul 29, 2011

i have a E2000 rounter . It's brand new. But i can't setup to use wifi. the software cisco connect can't find rounter. When i plug blue cab from e2000 to my ethernet port on my laptop , icon's network appearen " limit ".

View 3 Replies View Related

Linksys Wireless Router :: How To Setup / Configure E2000

Sep 16, 2010

I just bought a Linksys E2000 router and ever since I set it up the internet will cut in and out on my desktop and my laptop, but when I unplug the internet from the router and plug it directly into my desktop (that's how I have it right now) it works perfectly. I have already tried to reconfigure the router and that didn't work either.

View 4 Replies View Related

Linksys Wireless Router :: E2000 Gigabit Connection To Modem?

Aug 30, 2011

I am using a E2000 connected to a DSL modem via the internet port. My modem is able to connect at gigabit speed but  it doesn't seem to be the case with the E2000. All other ports are running at gigabit speed without problem. Is there any parameter that can be modified or is it a router limit?

View 2 Replies View Related

Linksys Wireless Router :: New Modem Doesn't Work With E2000?

Nov 7, 2012

I just received a new modem from my ISP acanac, the modem model is NetVito5300.When I connect the modem directly to my computer, I can access the internet, but if I connect through my wireless router, there's no wireless internet access. Wireless router model is CISCO Linksys E2000.I tried to download Cisco Connect Setup Software for PC and followed the step until one point it asked for my wireless username and password and I put them in correctly but it said my router was not successfully set up and failed. I should press the reset button and set the router to factory default mode, but I'm afraid I won't be able to set it up properly after doing so.What should I do to connect my new modem and wireless router properly so I have wireless internet access?

View 6 Replies View Related

Linksys Wireless Router :: E2000 With Modem DSL PPPoA Mode?

Jan 23, 2012

I bought an E2000 router with modem Dlink DSL-320B in PPPoA mode. I have already spent much time for to configure the router with-out any positive feedback . I've selected Automatic configuration with dhcp , static ip 192.168.1.2 and dhcp and modem with 192.168.0.1 and dhcp . If i view the status windows (internet connection) in router i see the right address for gateway and internet Ip , but is not allow to navigate by other PC linked with internal switch of E2000. Do you Know some particluar set-up for PPPoA mode ?

View 5 Replies View Related

Linksys Wireless Router :: E2000 - Unable To Access Web Setup

May 12, 2012

Just a day or two ago I was able to do what the title says, didn't make any adjustments to my E2000 while in it, had to find something though.Anyhow, connecting to http://192.168.1.1 results in "Unable to Connect", etc. Also tried it in IE9, Firefox Beta is my primary, and it still didn't work. Tried using Cisco Connect and it says it cannot connect to my router. I am wired to my E2000, which in turn is wired to my DSL modem (Actiontec GT701D-Its firewall not in use). I sitll have full connection to the internet as well as other wireless deveices do in my house.

View 1 Replies View Related

Linksys Wireless Router :: E2000 Web Protected Setup Button?

Aug 31, 2012

When adding a device that has a web protected setup button, can I use the web protected setup button on my Linksys E2000 router to set up the device even though I setup up my router using the Manual setup on the Web Interface configuration?

View 1 Replies View Related

Linksys Wireless Router :: E2000 Setup Via Ethernet Connection For Mac?

Sep 18, 2012

I recently purchased a Mac and wanted to reset my wireless router and set it up using my mac. However, when I downoaded the software to set it up again, it said it was not compatable with my Mac OS (X Lion 10.7.4). I am sure there is a way to manually set it up via an ethernet connection, but I am at a loss as to how to do that. The wireless router is working just fine, I am able to connect to the internet wirelessly and there's nothing wrong with my internet service, however the wireless router is not secured.I have my Mac connected to the wireles router via an ethernet cord.

View 1 Replies View Related

Linksys Wireless Router :: E2000 Separate Networks On One Modem / Two Routers

Feb 27, 2012

Using a Linksys E2000 and Linksys WRT54GL (both flashed to most recent firmware), I am trying to set up Network "A" and Network "B" on one modem. I do not want either A or B to be able to see each other for security purposes. Both are secured networks for the wireless connections and have different SSIDs.
 
After online research, and the inability to find my exact question answered, this is what I did and I'd like to know if I'm missing anything to keep A and B completely separate. Or, if I've done anything that will cause any problems on my network. [code]
 
I disabled the ability to change settings using wireless connection on both routers.

View 9 Replies View Related

Linksys Wireless Router :: E2000 Won't Connect To Laptop Using Easy Setup Key?

Dec 9, 2012

Running Win7. When trying to connect Lenovo laptop to E2000 with Easy Setup Key, the progress bar hangs at 25%. However, the E2000 will connect to the laptop with an Ethernet cable. Same problem on both of my Lenovo G555 laptops.

View 4 Replies View Related

Linksys Wireless Router :: E2000 When Try To Setup Wired Media Server It Will Not Connect

Aug 11, 2011

I have just setup a E2000 at home. All the wireless connections work and also my NAS server who i wired. But when i try to setup my wired media server it will not connect.

View 6 Replies View Related

Router-Linksys E2000 Works / Modem-Motorola SBV5222 Does Not?

Mar 15, 2011

Hardware: Modem-Motorola SBV5222 Router-Linksys E2000(Cisco brand name? I didn't buy the router) I use a PC with windows xp with sp 2 and 3 installed.Problem: I can use the internet just fine when I am connected to the router, my pc is connected directly to the router via cat 5 but when I directly connect to the modem I get limited to no connectivity. I'm not using a proxy server and before the router was set up(I live with roommates who set up the wireless network.) I could connect to the modem just fine. I can't repair the connection since it seems to be unable to renew the ip address. I've also tried to manually configure my ip address though I'm sure it wasn't the issue.I've racked my brain to think of a simple solution and it doesn't seem one is apparent and I'm almost sure it's something to do with xp and I'm not so great with software.

View 4 Replies View Related

Netgear Router / Setup An Internal Network In One Room Of A Building?

May 1, 2012

internet provided to whole building with connections in every room -> personal router in my room -> my PCs, Macs & printer, how to set up my computers so that they can share files with each other and print to my network printer, but without being susceptible to being accessed from other computers in the building? I have my own netgear router. But at the moment, my shared folders are accessible by everyone in the building, so is my printer If I set all the computers to automatically set ip by DHCP, they can access the net, but everyone in the building can access them (and my printer which requires a manual ip doesnt work). If I set all the computers to manual addresses (e.g. 192.168.1.14 ... 192.168.1.15 ... 192.168.1.16 etc.) they work with each other, the printer works, its secure, but I can't access the internet!Is there a way to for example have my own internal network with manual ip addresses, while also being able to connect to the net?

View 1 Replies View Related

Wireless :: Possible To Make User Based Setup For Each Room

Feb 26, 2011

I have 4 story hotel with 40 rooms, 10 rooms in each floor, i want to setup wifi network to cover all the rooms, what should i do or what instruments to use, is it possible to make user based setup for each room.

View 2 Replies View Related

Linksys Wireless Router :: E3200 Setup Using USB Modem?

Apr 25, 2012

How do I setup a E3200 router using a wireless USB modem to connect to the internet? This is my only choice, I do not have a wired connection and I do not own the telephone wires and there is no permission to do otherwise.

View 3 Replies View Related

Linksys Wireless Router :: E4200 Accessing Modem Setup Page?

Dec 4, 2011

if it is possible to access a modem setup page with a E4200 router? My router is on 192.168.254.200 and modem(WAG-200G) is on 192.168.254.100, ethernet cable is on internet port on the e4200 and on port1 on the modem. Modem is set is bridge and I set up a ppoe and dhcp on router. Everything is ok, except that i can not access modem setup page to see adsl conection speed and settings.

View 1 Replies View Related

Routers / Switches :: Set Up Linksys Wtr54G Wireless Router In Dorm Room

Jan 26, 2011

How do I set up the linksys wtr54G wireless router in the dorm room. When I try setting it up, I can only access the router set-up main page which is 192.168.1.1 then icon status shows that it sends out packets, but my computer doesn't receive any signal or (bytes). So, could it be that there are university restrictions on routers/dorm-room internet? How can I get it to work? I heard I need to set up an access point.

View 1 Replies View Related

Linksys Wireless Router :: Print From Living Room Desktop Using WRT120N?

Nov 23, 2011

At home, I have two desktops (bedroom and living room), a bedroom printer, and a WRT120N router. The bedroom desktop is connected to the WRT120N route and the printer is connected to the bedroom desktop.  The living room desktop is connected to the WRT120N route. I can print from the bedroom desktop, but cannot figure out how to print from the living room desktop.
 
How can I print on the bedroom printer from the living room desktop?

View 5 Replies View Related

Linksys Wireless Router :: E4200 - Expected Signal Strength In Same Room?

May 7, 2012

What signal strength should I expect when in the same room as the e4200 ?I'm checking signal strength with iStumbler and with option-right click on airport menu icon on my Mac.I'm getting a signal strength of about -55 while in the room with the router.What signal strength should I expect while in the same room, no physical obstructions, etc. ?

View 6 Replies View Related

Linksys Wireless Router :: Using Bridge WET610N To Stream Media To Living Room?

Aug 25, 2011

At home I am using the linksys wireless bridge WET610N to stream media to my livingroom. The setup looks like server <-> Linksys E4200 <-> WET610N. If I connect my laptop to the WET610N i get a speed close to 100Mbit/s. With this speed I can easily view HD movies, by playing them on my laptop. So far so good...But if I instead connect my Popcorn Hour A-100 (a media player) , to the WET610N (instead of the laptop) I get really poor performance. just a few Mbit/s, which is not enough.So my question is, why is the following setup working fine:server <-> Linksys E4200 <-> WET610N <-> LaptopWhen at the same time the following setup is working poorly:server <-> Linksys E4200 <-> WET610N <-> Popcorn HourThe WLAN connection between the Linksys E4200 and Linksys WET610N seems to be fine. The problem I am having seems to be the Ethernet connection/setup between the WET610N and the Popcorn Hour media player.

View 1 Replies View Related

Linksys Wired Router :: BEFSX41 / Westell 6100G Modem - Setup And Configuration

Jan 10, 2012

I have the Linksys BEFSX41 wired Firewall router.  My ISP is Verizon DSL.  The DSL modem is a Westell 6100G.  I have the wall phone line connected to my modem.  The output of the modem is going to the input of my Linksys router.  I have two computers connected to the router outputs.  In order for me to see the output or configuration of my Westall modem, I have to go http://192.168.1.1.  In order for me to see the configuration of my Linksys router, I have to enter http://10.10.10.1.  When I look at the instructions for setting up and configuring my Linksys router, it never mentions the above 10.10.10.1 address, but instead it tells me to enter the 192.168.1.1 address.  I have never done this because when I powered both units for the first time, and it worked, I noticed then that my Linksys address was the 10.10.10.1.  Why is it then that none of the settings or instructions for the Linksys router never mention to enter the 10.10.10.1 address as oppose to the one the do call out to enter  which is the address for the Westell modem?  What would happen if both addresses on both devices were the same?

View 2 Replies View Related

Linksys Wireless Router :: Internet Access Regarding Linksys E2000

Aug 21, 2011

I can connect to my router but either way it seems like i can't get any internet access (both wireless and by cable): url...I have tried the steps that the linksys FAQ suggests shall fix this problem, but this has not worked. I have also tried to reset the router without any luck. I know it its not the modem that is causing the problem because I'm wired to it now.On the E2000 every light is blinking as it should be (hence the FAQ) so it indicates that there might be a problem with the connection between the router and the computer (tested on other computers too without success).

View 9 Replies View Related

Linksys Cable / DSL :: WAG54GS Need Wireless Signal To Reach Each Guest Room

Jun 1, 2009

i'm setting up a wireless network for a local B&B they currently have a Linksys WAG54GS ADSL router in one of the rooms but need the wireless signal to reach each guest room the house has thick brick walls and an upstairs.i was thinking of using 2 x repeaters, the WRE54G's, and to put one on the ground floor within range of the current ADSL router and to put another on the 1st floor within range of the repeater on the ground floor to receive the bounced signal.I don't know much about these repeaters and how they work exactly and so unsure if this would be a viable solution in my case.

View 6 Replies View Related

Linksys Wireless Router :: Set WAN Side DNS On E2000?

Jan 27, 2012

I would like to set the router's dns entries but I don't see how to do that.  Basic setup page has DNS setep for the DHCP scope but I don't want to push dns to my pc's.  What I am looking to do is to use an alternate dns to what my service provder pushes and still have the abliity to route on my internal network. 

View 1 Replies View Related

Linksys Wireless Router :: E2000 - How To Find WPA Key

Oct 2, 2011

We bought our Linksys E2000 in the summer and went to set it up but something came up... Now we are trying to set it up but cannot find our WPA key... Where can we find this?

View 2 Replies View Related

Linksys Wireless Router :: E2000 Ports Not Enough

Jan 28, 2012

So i can only forward 10 ports on my E2000.Example, one game (Battlefield 3) requires 10 ports (TCP and UDP combined).What about my other games? how can one, if possible, add more ports to the router?

View 4 Replies View Related

Linksys Wireless Router :: E2000 Won't Connect

Nov 3, 2011

E2000. I run the setup program, my laptop sees the router and it shows a strong signal. When I try to connect with it, it won't connect.

View 9 Replies View Related

Linksys Wireless Router :: E2000 - Turning Off WPS?

May 28, 2012

I've been looking around like a madman now in the settings. where can I turn off my WPS ? Just cracked my own PIN within 6 hours with Reaver.

View 9 Replies View Related

Linksys Wireless Router :: E2000 - Way To Get Connectivity

Apr 24, 2011

My internet cut out last week and after calling my ISP I found out it was in fact my router that was causing the problem (regular connection to PPOE works fine). I've only had my E2000 about 2-3 months and have not had any problems with it. I've restarted the router, done a factory reset, upgraded the firmware, renewed the IP and still I cannot get any connectivity. I can access the router UI fine and I get a response from pinging it and also I have tried replacing the cables but that didn't fix the problem either.

View 9 Replies View Related

Linksys Wireless Router :: E2000 To Use It For A Switch

Aug 28, 2011

I have an E2000 that I was given as a gift. I would like to use at it my office for a switch at my cubicle where I can connect 2-3 computers simultaneously.  I am in a large network and am a user only.  When I hooked the E2000 up today my computers would not get internet access BUT my laptop got wireless access and internet.

View 2 Replies View Related

Linksys Wireless Router :: E2000 - How To Keep Speed At 300 M

Dec 7, 2011

I'm using E2000 currently and meet a wireless connection problem. The speed can up to 300M bps. When I confiured the E2000 to band auto (20-40mhz) and my wireless network card to work at also auto (20-40) mode, it always down to 144M speed when connection.
 
If I changed some settings in E2000's wireless configuration, in the status sheet I can see it works at 40MHZ. But after a while,(5-10 mins) it automaticly down to 20MHZ and my labtop connect only got a 144M speed.
 
how can I deal with that to make it always keep at 300M connection? Note the previous router I used to connect to my lattop can always keep that speed.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved