Cisco AAA/Identity/Nac :: ISE 1.1 Differentiate Guest Access Depending On Device
Sep 21, 2012
I'm running an ISE 1.1.1 and i need to authenticate guest users.The goal is apply different Authorization profile to the same guest user based on the thevice he use to connect to the guest wlan.
I.E.:
if guest user "user1" connect to the guest WLAN using a windows laptop, than apply "Guest" authorization profile
if guest user "user1" connect to the guest WLAN using an Apple iPad, than apply "Mobile" authorization profile
I've tried to deployed the following 2 authorization policy:
1)if "Apple-Device" and "IdentityGroup:Name EQUALS Guest" then "Mobile"
2)if "Guest" then "Guest"
but the first rule never match and even if I use and iPad to access the guest network the "Guest" authorization Profile is matched
I've verified that the iPad is correctly recognized as an Apple-Device changing for test purposes the rule table in
1)if "Apple-Device" then "Mobile"
2)if "Guest" then "Guest"
My dlink wireless has a WEP consisting of 40 numbers (or 4 lines of 10 numbers)When I connected a PC to the dlink it asked for the key and I entered all 40 numbers and it connected without problemI also had to enter all 40 digits for my Wii to connect to it.But when I connected my PS3 I only entered in the first 10 digits and it connectedI have connected various devices to the dLink and some ask for the first 10, some 20 and some require all 40.I have just bought a new phone Samsung Galaxy Ace and trying to connect to the dlink is impossible. I have entered all 40 digits and it wont connect, it just says "authenticating" then "disabled". I have tried the first 10, then 20, then 30 and it still says disabled.The problem then is I don't know whether the phone is faulty or the dlink just wants a particular line of my key.
I'm working with an ACS 5.3 and ASA 8.2.5 and i've configured several access services for webvpn and ipsec remote access profiles but i haven't found which radius attribute can differentiate among them in the service selection rules.
Actually I have a lab with ACS 5.3 running with 802.1x, but when when the user is successfully authenticated, it's assigned and IP address from the DHCP server, is there a way to assign a static IP address depending of login username??
I have ACS 5.2 running as a VM. I'm AD, then local authentication successfully for device access, but I want to define ACS user groups to restrict login. I don;t see any way to do this. If I use AD groups, they don;t show up as selection options on the policy screens, just the ACS locallyy defined groups.
I need to know how WLC can support ISE guest management in wireless mode. Tested and confirm by Cisco SE, Knowing that WLC currently does not support dynamic VLAN authorization for central web authentication. This limitation will be addressed in WLC 7.2 when MAB and CWA support is added to the code. On the other hand, DACLs on the other hand works and we can use that to restrict access of this guest traffic.Can ISE support on WLC LWA guest access provision? This able to view guest user login and show at ISE monitoring.
We are using ACS ver 4.2 and trying to setup users with limited access to our switchs and routers. Here is what we did:
1) Created a user in ACS
2) Create Shell command Autorization Set - ReadOnly Unmatched Commands - Deny Commands Added show exit
* this should limit the user to the show and exit command only (correct)?
3) Created a group - HelpDesk with the following TACACS+ Settings
Shell (exec) is checked Priviledge level is check with 15 as the assigned level Assign a Shell Command Authorization Set for any network device - selected ReadOnly - shell command autorization set seleted
When the user logs on to the router/switch it appears that he has full access. He can enter the enable command, config terminal command, etc. All we want him to be able to do is to issue the show command.
I have a question reguarding the Cisco Secure ACS 5.2 and network access vs device admin access. We have our switches,routers,and firewall configured to use TACACS+. We also have configured our Wireless LAN Controller to use RADIUS for allowing for 802.1X authentication to the wireless network. We are using Active Directory for the backend user database and have assigned the users to different groups in AD. We have a Network Admins group to access the network devices and a Wireless Users to access the WLAN. The problem that we have is that everyone in the Wireless Users group can access the devices and run full commands on them. We want to limit the Wireless Users group from being able to do this. Is there a policy or config change that we will need to make for this?
I have 2 types of network, DC & Office. I have 3 types of users NOC, Office & DC. Office network devices are in Office NDG, DC network devices are in DC NDG. Becasue of such config, Office network users can only access Office devices & DC network users can only access DC network devices....Now i have NOC users, who wants access to both Office & DC network devices. How can i achieve this?
I am new to ACS 5.1.I need to configure the ACS to act as the 802.1x authentication Server, as well as, act as the Radius Server for the authentication and authorization process when I access the switch.
I had created Two rules (under the Access policy) to cater for the two scenario, it will always "stuck" at the 1st rule. For e.g. Rule-1 is meant for the 802.1x, Rule 2 is meant for the AAA process. When I tested with 802.1x, it worked perfectly. But when I tested to login to the switch, it always failed. Based on the log, Rule1 is not able to fulfill my requirement (of course it can't). I thought the rules check process will proceed with Rule-2, but apparently it did not.
Is it possible to allow certain websites to bypass the web authentication pages, so that they do not need to authenticate to get to our own website, but do have to if they wish to go anywhere else?Looking at a 5508 model at the moment
My users are using AnyConnect to make a remote access VPN connections to the corporate office thru an ASA5520. At this time, VPN users have very limited privileges because we allow users to connect using their home computers and RSA tokens.
I need to find a way to determine whether an AnyConnect client is connecting from a company-owned/maintained/patched laptop or some other device. I would like to give full network access to the company laptops while continuing to restrict access to the home machines. So far, the only idea I have is to use DHCP and associate the MAC addresses of the company laptops with addresses is a privielged subnet range.
Currently the guest wireless users are maintained by WCS 7.0.172.0. I'm having a project to set up another 5508WLC in one location to replace the WLC in use in different location. My concern is regarding the guest user accounts. Can I use the feature of "Save Guest Accounts on Device" in WCS to save all the guest accounts on another WLC? I tried this feature and I got the message of "Successfully saved Guest users to the following respective controller(s) where they were applied". I don't know if it is because there is currently only one WLC in the WCS or the account can only be saved on the original controller where it was created.
Experienced problems with guest network not showing up as an available network on a device (laptop, iPad, etc)?I double checked if guest network is enabled on a EA3500 router. What other steps can I take?
I'm new to ISE. I want to set up a very basic method for BYOD users to access our wireless network. I've set up an SSID for external Web Auth, where users get redirected to the ISE Guest Portal: [URL]
At that screen, users can enter their Active Directory credentials and login. Although the authentcation shows as successful under Operations -> Authentications, the user is redirected to the device registration page. On that page they see the message "We are unable to determine access privileges in order to access the network. Please contact your administrator." Their device MAC is listed, and they can enter a description but the "Register" button is greyed out.
I'm getting overwhelmed with the amount of documentation available as well as the new terminology. I'm familiar with using Windows RADIUS servers, but ISE is very foreign to me now. Is there any documentation to understand how access requests are processed?
I'm having problems settting up a Guest NAC server to authenticate administrative users against a ACS 5.x server. In the ACS RADIUS Authentication log, I can see the user authentication is successful.In the AAA Diagnostics log, I can see the following warning:An Access-Request MUST contain either a NAS-IP-Address or a NAS-Identifier or both; Continue processing.
Managed to guest LWA working with ISE for wireless guest portal access? I have Cisco 4400 WLCs running latest 7.0 code and ISE 1.1.2.All guest portal examples seem to be CWA which only works on 7.2 code.Am I without hope getting this working on 7.0 code?
is it possible to set the dot1x guest-vlan on a Catalyst Switch via ACS 5.2 dynamicly. I want to make MAB with known Devices (FAT-Clients, Notebooks, Desktops, Printers) and unknown Devices.I will set the VLAN dynamicly with dot1x per ACS. For known FAT-Clients, Notebooks etc. it's running well.But for Printers it's more difficult because I have about 500 Printers in several IP-Segments on several Switches and I will not make to much Rules in ACS for Grouping, Mapping and Authority-Rules.My Idea is to set the Guest-VLAN on every Switch, read them with ACS and use this for my Printers.The Problem is that Guest-VLAN is set on more than 100 Switch and this guest-vlan is different on any Switch.Can I read the Geust-VLAN Value so that I can set this via ACS ?
For some reason, i can't get the lobby "sponsors" to authentication to the Guest NAC server (2.0.2) using ACS 5.2 via Radius.I was able to figure out how to get the Guest NAC Radius Authentication for "Administrator" to work by adding custom Radius value IEFT-6 under...
Policy ElementsAuthorization & permissionsNetwork AccessAuthorization Profiles I added a policy & under the Radius Attributes Tab... I manually entered an Attribute that looks like the following: Dictionary Type: = RADIUS-IETFRadius Attribute: = Service-TypeAttribute Type: = EnumerationAttribute Value: = StaticValue = "Administrative" I then created an Access Policy... I looked for a specific AD group - Result = "Name of Custom Policy Above"...
All of that is working just fine.... the NAC Guest Docs tell you the Radius server must return a value of IETF-6...
When it gets into the Sponsor section, it doesn't tell you the value your Radius server should return... so just for grins, instead of "Name of Custom Policy Above", I tried "Permit Access"... i tried the "Name of Custom Policy above"... Not sure what else to try to get this to work...
here is a like to the document i'm following: URL
Page 68 refers to the "Configuring Sponsor Authentication" for Radius.. it just tell you to add the Radius Server & change the authentication order.
I have a 2960 sw configured for dot1x authentication, the problem is the Guest VLAN and Restricted VLAN didnot work. The switch port was stuck in authenticating status. The server is Juniper IC4500.
I've configured an ACS 5.3 system and all my groups etc fucniton corrcetly both for Network Access and for Device Administration.
However I'm stuck trying to allow clients to authenticate against the router's web-page i.e. Web-Authenticaiton, using TACACS+ between the router and the ACS5.3.
I've looked into this and I need to configure a custom-attribute of "service" with type Outbound and link this to an Authorization policy.
We have insatalled 5 ise 3315 boxes IOS 1.0.4 in our network where in two of them are admin node , two of policy services and one is mnt node. We are using guest sponsor portal for wirless guest user where in we have integrated WLC 5508 with ise and using weblogin for guest users.
We have created open ssid in wlc and using external redirected url of ise for guest login page. But when we create any guest user in sponsor login for guest user we faced following issue
1) When guest user gets conected to wirless and login in to guest portal with credential after putting credential then its again redirect to same login page wihout successful login prompt.
Can we pompt successful login after guest login to guest portal or redirect to any other link like google.com so guest user will gets to know he is able to access internet now
2) We have creted time profile 8hours first login for guest user. When guest user gets connected while putting credential in to guest portal. But we face issue after approximately every 20 mins guest gets disconnected from internet and guest again gets login page of guest portal and if we put same credential then its working but after approx 20 min interval user get disconnected from internet.
I am trying to access a government jobs page to apply for an internship. When I access the page from my home network (using multiple browsers and multiple computers) I get a result that references the job opening from last year, and doesn't have an application button. When I access the site using my 3G connection on my phone, or when accessed from any other internet connection, I get the new page which includes information about the 2013 job opening, and has an application button. When I try to enter the URL for the application page on my home network, I get a 404 error. If I turn my wifi off on my phone and reload the same page, it resolves to the correct page.
I'm new and just entered in the world of studying my certification for Cisco, since I'm curious I see that there are switches that can perform task depending on the layer? I see some with specifics for Layer 2, some other for layer 3 and even some others with router capabilities!I know this is a rookie question but how do I know what the best switch for a network? or how can I identify them?
I would like to configure a guest-vlan and restricted-vlan on a 2960 switch, but I can not.
I am trying to configure the interface using the following commands: [code] similar result is obtained while trying to configure a auth-fail vlan. the full configuration file is attached.
I installed NGS 2.0.2 for wireless guest user management and authentication. I implement webauth via webauth page on wlc deployed.One Branch with a WLC5508 version 7.0 wireless anchor controller is working on the NGS.But now I integrate next branch with WLC4402 version 6.0.188 and the authentication of users at the new branch gets an error, wrong user/password.
I double checked configuration and user/password but I can't find any configuration error. Also stopping and starting of radius service and reboot of NGS still does not work. I tried to debug the radius via web interface and watched for the loggfile and there is still a reject.I also tried the freeradius command radiusd -X but I got an error when starting the radiusd -X.
1.) How can I figure out, if I will get the correct password from my WLC ? Are there any debug options to see more ? e.g. some cli commands, radiustest utilities or how to get the received password from the chap challenge of the debug ?
2.) I have appended a part from my radius loggfile. How can I find the detailed error in the radius log file? Is it correct that the password in the debug file is empty ? raiuds logg line "[radius-user-auth] expand: %{User-Password} -> "
I'm at my brother's house and I'm trying to connect to hs wireless network. I know the password but whenever I try to enter it it gives me a message that says, "The network password needs to be 128bits or 256 bits depending on your network configuration. This can be entered as 8 to 63 characters or 64 hexadecimal characters." From other forums I've looked at it says that I need to get to the router settings page. It gives me an IP adress to paste into the web browser but it doesn't come up as anything. What the heck?
I am configuring 802.1X in a 3560 Switch, my Radius server is a Microsoft IAS, when I connect a station of a guest user, the guest-vlan is not assigned in the port, and I have these logs:
May 8 21:23:02: dot1x-ev:Received an EAP Timeout on FastEthernet0/8 for mac 0000.0000.0000 May 8 21:23:02: dot1x-ev:dot1x_guest_vlan_applicable: Guest VLAN not
I'm setting a Wireless Guest with a WLC 5508 (7.3) and ISE (1.1.2) -- (no anchor).It appears to work (still some adjustments are required), but I found when the guest user log in, it receives the successful login screen and inmediately the guest portal again. If another browser window or tab is open, the user can browse properly.
I am using 802.1x authentication with multi-domain ports; Phone and PC connected to phone. The phones are Nortel (Avaya) and the PCs are Dell/HP Laptops. All are configured for Certificate authentication and this works well. However we sometimes get some ports stuck in Guest mode. when a non certificated laptop connects to a phone port and fails authentication, the data port is placed in the Guest VLAN. However when the laptop disconnects the port isn't reset and remains in the guest state. When a subsequent good laptop connects and attempts to authenticate the switch ignores this and leaves the data port in the Guest VLAN. he switch is a 2960S with Version 12.2(58)SE2 IOS.
The port is configured as follows:
! interface GigabitEthernet1/0/15 description DANS Port switchport access vlan 1807 switchport mode access switchport voice vlan 1855 priority-queue out
[code]....
I placed the AAA, dot1x, eap and auth debug on for all events and then connected a good laptop, the only debug message I got were as follows:
Mar 19 16:17:01.391 GMT: AUTH-EVENT (Gi1/0/15) dot1x_switch_is_restrictive_vlan_open_auth:Multi-Host with Guest Vlan/Auth Fail Vlan or open aut Mar 19 16:17:01.653 GMT: AUTH-EVENT (Gi1/0/15) dot1x_switch_is_restrictive_vlan_open_auth:Multi-Host with Guest Vlan/Auth Fail Vlan or open aut Mar 19 16:17:02.654 GMT: AUTH-EVENT (Gi1/0/15) dot1x_switch_is_restrictive_vlan_open_auth:Multi-Host with Guest Vlan/Auth Fail Vlan or open aut
[code]....
I would have expected the auth function to have reacted to the EAP packets sent by the good client when it connected and performed eap authentication but it didn't, all it did was say the ports in Guest mode and left the laptop in this VLAN.
