DLink Wireless Asks For Different Key Depending On Device?
Mar 7, 2012
My dlink wireless has a WEP consisting of 40 numbers (or 4 lines of 10 numbers)When I connected a PC to the dlink it asked for the key and I entered all 40 numbers and it connected without problemI also had to enter all 40 digits for my Wii to connect to it.But when I connected my PS3 I only entered in the first 10 digits and it connectedI have connected various devices to the dLink and some ask for the first 10, some 20 and some require all 40.I have just bought a new phone Samsung Galaxy Ace and trying to connect to the dlink is impossible. I have entered all 40 digits and it wont connect, it just says "authenticating" then "disabled". I have tried the first 10, then 20, then 30 and it still says disabled.The problem then is I don't know whether the phone is faulty or the dlink just wants a particular line of my key.
View 14 Replies
ADVERTISEMENT
Sep 21, 2012
I'm running an ISE 1.1.1 and i need to authenticate guest users.The goal is apply different Authorization profile to the same guest user based on the thevice he use to connect to the guest wlan.
I.E.:
if guest user "user1" connect to the guest WLAN using a windows laptop, than apply "Guest" authorization profile
if guest user "user1" connect to the guest WLAN using an Apple iPad, than apply "Mobile" authorization profile
I've tried to deployed the following 2 authorization policy:
1)if "Apple-Device" and "IdentityGroup:Name EQUALS Guest" then "Mobile"
2)if "Guest" then "Guest"
but the first rule never match and even if I use and iPad to access the guest network the "Guest" authorization Profile is matched
I've verified that the iPad is correctly recognized as an Apple-Device changing for test purposes the rule table in
1)if "Apple-Device" then "Mobile"
2)if "Guest" then "Guest"
View 5 Replies
View Related
Feb 7, 2011
I have just purchased a new ASUS Laptop for my wife.We are currently running two destop computers on a D LinK Router. How do I go about including the new computer on the network wirelessly?What do I need to purchase to make the transition easiest? The two desktops are running Windows XP Professional, the new system is Windows 7.
View 4 Replies
View Related
Nov 22, 2011
My whole college Campus is enabled with WiFi facility.But the officials said that u cannot connect it through mobile.U can only connect it via laptop.i tried connecting it via mobile, but it asked many other things other then id & password, i Have the id & password, but i dont know what to write in other things.
View 1 Replies
View Related
Oct 20, 2012
I am trying to access a government jobs page to apply for an internship. When I access the page from my home network (using multiple browsers and multiple computers) I get a result that references the job opening from last year, and doesn't have an application button. When I access the site using my 3G connection on my phone, or when accessed from any other internet connection, I get the new page which includes information about the 2013 job opening, and has an application button. When I try to enter the URL for the application page on my home network, I get a 404 error. If I turn my wifi off on my phone and reload the same page, it resolves to the correct page.
View 17 Replies
View Related
May 31, 2012
I have two xp pro machines that im trying to share an accounting system on one machine is the sage accounting and i want to join another machine to it the sage is working on both machines except the one is not allowing reports, comes up with an erro when i map drives i have to put in a user name and password (only once) then it works but im suspecting this is causing a problem for the reports on the previous two machines that worked fine...(we have just upgraded both) it asked for a windows password but you just pressed enter and it logged in.how do you get two xp machines to talk without password prompt i have run the networking wizard on both, and they are both on the same workgroup
View 2 Replies
View Related
Jan 3, 2011
When trying to connect a laptop to my router it asks for my password. I am sure I am putting in the correct word but every time my connection fails. Is their anyway of checking my password
View 1 Replies
View Related
Jan 6, 2013
Well there are 2 PC in my LAN:NBNotebook WiFi connection to my router NETGEAR DGN2200v3 Windows 7 Professional x64 SP1 DSKDesktop Cabled connection to my router NETGEAR DGN2200V3 Windows XP Home Edition 32bit SP3 If from DSK I try to access NB shared folders through network, everything is fine.If from NB I try to access DSK shared folders through network, the following window appears:The strange thing is that this problem seems to occur randomly! Sometimes it occurs, sometimes not (during the same session of usage of NB). This is annoying because usually I need to work with NB on files which are stored in DSK through local network, so if I need to apply a change to a file, sometimes I won't have a chance to do that.
Some minutes ago I configured DSK and NB so that the account for both has the same username and password.When on NB I try to access DSK shared folders, the window I posted above appears, I fill the data but neither this time I have granted access...This is what happens:- I reset NB WiFi connection- Using NB I try to access DSK shared folders --> everything is ok- About 5 minutes passes- Using NB I try to access DSK shared folders --> the authentication window appears, I fill the username and password fields but they won't be recognized
View 14 Replies
View Related
Feb 4, 2011
I'm at my brother's house and I'm trying to connect to hs wireless network. I know the password but whenever I try to enter it it gives me a message that says, "The network password needs to be 128bits or 256 bits depending on your network configuration. This can be entered as 8 to 63 characters or 64 hexadecimal characters." From other forums I've looked at it says that I need to get to the router settings page. It gives me an IP adress to paste into the web browser but it doesn't come up as anything. What the heck?
View 4 Replies
View Related
Jun 2, 2011
We have configured an cisco 2800 for vpn clients. The weird thing is that after some time (not specific time interval and no idle connection) asks for re-authentication. Some times after re-authenticating session disconnects.
View 2 Replies
View Related
Jul 23, 2012
I'm new and just entered in the world of studying my certification for Cisco, since I'm curious I see that there are switches that can perform task depending on the layer? I see some with specifics for Layer 2, some other for layer 3 and even some others with router capabilities!I know this is a rookie question but how do I know what the best switch for a network? or how can I identify them?
View 3 Replies
View Related
Dec 8, 2012
I have a wireless setup with a linksys router hooked up. I mainly connect with my laptop but now I'm trying to test out a Dell Inspirion 3000 Windows XP. The Dell picks up the signal of my connection that is secure when I have the proxim router connected. When I go to put in my password I get this message : "The network password needs to be 40bits or 104bits depending on your network configuration. This can be entered as 5 or 13 ascii characters or 10 or 26 hexadecimal characters." Otherwise if I direction plug in the Ethernet cord it 'connects' but I can't do anything. I'm set up as a WPA Personal in security mode when I got into my linksys account.
View 2 Replies
View Related
Apr 24, 2012
So I have an issue with getting a laptop hooked onto the router signal. The router is a brand spankin new Linksys EA4500 and the laptop is an IBM which is running Win XP (not sure of SP version as it is a customer's comp. at a hotel I run). Anyway, the error message I am encountering is:The network password needs to be 40 bits r 104 bits depending on your network configuration. This can be entered as 5 or 13 ascii characters or 10 or 26 hexadecimal charactersAt first I thought is was my router password since it contained a $ symbol so I changed it to only letters and numbers but still didn't work. I have never encountered this error message on any laptops and no other rooms have been affected.
View 2 Replies
View Related
Jun 1, 2012
I stopped service with Sympatico but my when in my new Email inbox, I receive a pop-up from Sympatico asking for my password. How do I stop this?
View 2 Replies
View Related
Sep 20, 2011
We have configured an 2801 to aggregate some VPN clients. The problem is that between 20 and 50 minutes it asks for re-authentication even though the connection is not idle. Is there a timer that creates this problem?
Below the applied configuration :
crypto isakmp policy 1
encr 3des
authentication pre-share
[Code].....
View 1 Replies
View Related
Feb 12, 2012
Actually I have a lab with ACS 5.3 running with 802.1x, but when when the user is successfully authenticated, it's assigned and IP address from the DHCP server, is there a way to assign a static IP address depending of login username??
View 13 Replies
View Related
Apr 25, 2012
I have been putting up with rubbish wireless signal down one end of my house now for quite some time. So I thought I have a spare wireless router and I could put it down there but I am sure ts not as easy as just plugging it and away you go.
Network Setup
Router 1 is a D-Link DIR-655
Router 2 is a D-Link DI-524
I need to know how to setup Router 2 so it basically become just a wireless access point
View 6 Replies
View Related
Nov 30, 2011
My BEFSR81 is my primary router and has DHCP turned on. The router's DHCP range is set to accommodate 12 devices. I have three computers wired to it and their Host names (as specified in the set-up of each computer) show up in the router's DHCP device table. I also have two printers (one old Brother HL5250DN laser printer and one new HP Photosmart Premier C410a inkjet printer) connected and there are blanks where the Host name should go. I would like to be able to tell which printer is which when I am looking at the DHCP device table. How can I get a names associated with each printer's IP address in the router's DHCP device table? (The real problem is that the router seems to have both printers at the same IP address (192.168.1.100) and if I can get one of them to change I'd like to know which one it was!)
View 1 Replies
View Related
Jan 3, 2013
We are using LMS 3.2.1 with SP1 and Campus Manager 5.2.2.Server runs Windows 2003 R2.Everything runs fine except for User Tracking on two Catalyst 6500 switches running CatOS. These devices are discovered, reachable, SNMP works fine, neighbors seen. But when we try to launch acquisition, the UT utility complains with this error message:"Failed to start acquisition: Device unreachable. Please enter a valid device."When we wanted to add ports via Device Trap Configuration, LMS has fired a different error message: "There are no ports to configure for the selected device(s).Check whether you have selected any router(s)." I have checked the portsData.xml file, which doesn't have any ports included for the two devices: [code] We have tried to exclude / include the switches in the data collection, but that didn't work.
View 3 Replies
View Related
Feb 15, 2013
I have a new internet router linksys EA2700 Firmware Version: 1.0.14, the wireless signal doesn't cover the whole house so I like to extend the wireless signal using my old router Dlink DSL-2750U as Access point, I configured the two router as following but yet didn't work.
Linksys
DHCP: enabled,
IP lease range 192.168.1.100 to 150
Wireless SSID, Security Mode, Passphrase, Channel Width and Channel number same as Dlink
Dlink:
DHCP: disabled
AP Mode: Access point
Bridge Restrict:Enabled
Remote Bridges MAC Address: is the linksys MAC.
And I removed the Layer2Interface and WAN old configuration.
View 3 Replies
View Related
Jul 28, 2012
i want to set up my wireless router it is currently set on a static ip but i want to set up in pppoe(username/password) mode i set up once in pppoe but internet is not working?
View 7 Replies
View Related
Feb 27, 2011
I have a PC connected to the internet via a d-link 615 router and a cable modem.The PC is hardwired to the modem and the laptop can connect wirelessly via the router.I own a HP 6280 Network MFD and would like to locate this in a separate room to the PC.I own a Linksys WAG54GS mobem router from my last ADSL connection.Can I site the wireless router with the MFD and use it as a wireless hub?
View 4 Replies
View Related
Dec 28, 2011
I have a new Dlink wireless router. Previously I had a Belkin router. The new one was said to have stronger signal. I am not able to connect via wireless to the router from a PC with Windows Vista. It works fine when I use a cable. Then I am able to connect to Internet via the router. Also, I am able to print on a wireless printer. It is also possible to use Internet from an Ipad with wifi.
The Belkin router had a different network, 192.168.2....When the cable is connected I can ping 192.168.0.1 but not when I remove the cable. In Windows Vista the connection has status "connected". When the cable is connected, the ipconfig /all is printed as below. It is a Swedish version. Some translated words:
Tr�dl�s = Wireless
Ja = Yes
Nej = No
Fr�nkopplad = Disconnected
[code]...
View 19 Replies
View Related
Nov 14, 2011
I have a Dlink DIR-615 wireless router. Without re-setting or changing the password I want to block my neighbour from using it as he knows my password
View 19 Replies
View Related
Nov 6, 2011
I recently bought a new D-Link DIR 615 but I dont get adequate range in the rooms farthest away from the router. I have an old D-Link DIR 634M router which I'm told can be used as a wireless repeater. I went through several articles that describe connecting the two routers through a LAN cable. However is there a way to do the same without using a cable of any sorts?
View 1 Replies
View Related
Jan 1, 2013
Every time i plug in my d-link DWA-125 usb wireless adapter, my computer "unplugs" my usb even though it is still plugged in.
View 4 Replies
View Related
Sep 6, 2012
I have a D-Link Router and I need to find the WEP number. How do I find it on my Router?
View 1 Replies
View Related
Jun 24, 2011
I want to make password for my dlink wireless
View 1 Replies
View Related
Nov 13, 2012
how i can configure dlink dl624
View 1 Replies
View Related
Jun 20, 2012
I've been using DIR-600 wireless router since an year. But, after having a factory reset i'm having a strange issue. When i'm configuring the router in the Dlink page(192.168.0.1 now i changed it to 192.168.1.100).. In that i go to Manual Internet Configuration>> then i select Static IP(Since i've been provided a static IP,gateway, DNS settings by my ISP) As soon as enter IP: 192.168.1.2,, and Subnet 255.255.255.0,,,Gateway : 192.168.1.1 and enter DNS details and press SAVE.. I get a message " Invalid IP Address".. I've set the Router IP as 192.168.1.100 and DHCP range : 3 to 199I don't know why is this happening.. I'm not able to connect to internet now from the router.
View 5 Replies
View Related
Mar 13, 2012
I've just installed a Netgear WDR4500 (n900) in my second floor office.The wireless range works great for multiple top floor computers as well as the 1st floor TV/ps3/tablet area.I am having some issue in the backyard and back deck though. (just something about my stucco walls)
So here is my question.I have my old DLINK dir-655. Would it be advisable to use a powerline connection (I already have Powerline adapters) to the ground floor near the back and piggyback the wireless?(This would also allow me to Hardwire the TV/ps3/htpc)
View 2 Replies
View Related
Mar 20, 2011
my new dlink router 655 was working great when I hooked it up to my desktop computer that was running vista windows and my hp notebook that runs windows 7 ultimate was working just fine too, but when I downloaded windows 7 ultimate to my desktop I lost my internet connection. after resetting it I got it back and I thought everything was fine, but now I have to reset it every few hours.
View 2 Replies
View Related
Feb 20, 2012
my internet has been acting slow, i have a dlink router 615 and high speed comcast internet
View 4 Replies
View Related
