I have a question about upgrade NAC Module, I follow standalone procedure to do the upgrade but I wonder about the upgrade file should I use because on the Cisco site I didn't find the upgrade file from 4.8.0 to 4.8.2.
what I found is nme-nac-upgrade-4.8_2-from-4.6.x.tar.gz ??!!!
So my question If I use the NAC upgrade file I was used for upgrade the CAM & CAS applaiances
Is it possible to upgrade the CSACS-1121-UP-K9 to be a non upgrade part? We were going to upgrade from a Windows 4.x to the above Appliance (version 5.x) but there is now a reason to keep the old Windows version running therefore we cannot give the new Appliance the old ACS's licenses?!So we should have (with hindsight) bought a fresh version of the ACS 5.x rather than an upgrade.
View 1 Replies View RelatedI have a ACE20 module with a performance of 4 Gbps. I want to upgrade the performance from 4 Gbps to 8 Gbps. Is correct the following SKU for the upgrade?
ACE30-UPG-08-K9=ACE10 or ACE20 to ACE30 Upgrade for 8 Gbps Throughput
And if i want to upgrade the performance to 16Gbps is correct the sku?
ACE30-UPG-16-K9=ACE10 or ACE20 to ACE30 Upgrade for 16 Gbps Throughput
I noticed that the price list of both codes is the same....
Is it right for the SKUs listed I get the new module with the performance ACE30 requested?
I just got 2 Cat6504 Chassis and 2 ASASM pluged in them. show version from submodule ASA as follow:
SVC-APP-HW-3#show ver
Cisco IOS Software, trifecta Software (trifecta-SP-M), Version 15.1(1)SY, RELEASE SOFTWARE (fc2)
[Code].....
I want to upgrade new OS for ASA to 8.5 (asa851-smp-k8.bin) but after copy this soft to the module, I can not "write" command or when I reload this box, everything was no changed. SVC-APP-HW-3#write startup-config file open failed (No such device)
I have a client whom has a 4900M switch as their SAN switch. They are getting ready to upgrade their SAN to use 10G.I had quoted them a price for an X2 module, but I am unclear based on pictures I have seen of the part number
X2-10GB-SR
whether or not the X2 module plugs into the X2 slot on the switch, AND then also has to have a transceiver put in it to receive the SC ends of the Fiber jumper, or whether the SC ends of the fiber jumper plug into the X2 module directly.
I'm trying to upgrade an asr1001 (r1) from asr1001-universal.03.02.00.S.151-1.S.bin to asr1001-universalk9.03.02.00.S.151-1.S.bin. i've put in the boot system flash asr1001-universalk9.03.02.00.S.151-1.S.bin command and reloaded but the box keeps loading first image the configuration register is 0x2102. i've tried the license module command to enable adv enterprise but it made no difference so i removed it again. my license is now;
License Package Information for Module:'asr1001'
Module name Image level Priority Configured Valid license
asr1001 adv enterprise 1 NO adv enterprise adv ip services 2 NO adv ip services ip base 3 NO ip base
I am using Cisco ASA5510 Firewall in my network. Upgraded the Memory and Flash to 1GB and 512MB.But the 5 interfaces ports are 10mbps.Can it possible to upgrade the module of Interfaceses from 10mb to 1gb?
View 2 Replies View RelatedI'm looking at upgrading our FWSM modules in our 6500's. They're the WS-SVC-FWM-1 modules.
We're running on version 3.2(12) at the moment and I'm looking to jump up to 4. Any recommendations around whether I should to go to 4.1(6) or 4.0(16)? There aren't any features in particular that I would need in 4.1 but want a good stable base to sit on for 12 months until I look at this exercise all over again.
while upgrade NME-NAM module IOS on 2821, as a result of sudden disorder in power system nam helper image crashed and it seems
i have to fix this !
(as you may know without helper image you cant load IOS image of NAM so it doesn't work !!) on the other hand in Cisco documents it's mentioned besides upgrading NAM IOS we can upgrade helper image too. but i couldn't found in Cisco downloads the appropriate link to download either older version or latest version of , Nam helper image. (even with CCO Account)
in addition i have a brand new NAM Module that contains NAM Helper Image but I couldnt find a way to tranfer this image via ftp to ftp server
I am using ACE30 having s/w version: 4.2. I am using ACS 5.2
I have used the below commands to add ACE with ACS for AAA.
tacacs-server key 7 "nacs0wvd!q"
tacacs-server host 96.86.76.66 key 7 "nacs0wvd!q"
tacacs-server host 96.86.76.67 key 7 "nacs0wvd!q"
[Code].....
I am getting authenticated by ACS, but the problem is authorization is not happening. In ACS, i have just added the device IP using TACACS+.
I'm not able to find any clear process/documentation on how to upgrade 5.1 to 5.4, so I have assumed that it will be a 2 stage process...Upgrade from 5.1 to 5.3 (or 5.2) Then upgrade to 5.4?
View 9 Replies View RelatedWe only need to the Local User info to be transferred to the Ver5.1.
View 15 Replies View RelatedAny issues migrating ACS 4 to 5?
View 3 Replies View RelatedI have some requirement where I need to upgrade the ACS 4.2 to 4.3, are there many upgrades available from Cisco on this ?
View 5 Replies View RelatedI want to upgrade the Cisco ACS ver from 4.0 to 4.1.1.24 running on VM envoinment with primary and scondary server. I have tried to find documents related this upgradation.
My target is:
4.0====4.1.1.24====5.3
Secondly I wanted to know that this upgradation would possible for VMs or not. and this upgratation (4.0 to 4.1.1.24) could be possible on demo license?. because I have orderd to Cisco L-CSACS-53VMUP-K9 and CON-SAS-CSACS3V.?
I'wont to upgade my ACS server 5.0.0.21 to 5.1 . I wont to use Active Directory . it's seem that in my curent version AD is not supported !
View 12 Replies View RelatedI'm currently running ACS 5.3 Patch 7 in a VM on VMware ESXi. I download the application upgrade bundle, and placed it in my SFTP repository, and ran "application upgrade filename repository name". It throws an error that the manifest file is not found in the bundle.
I tried putting the ACS.gz file in an FTP repository, and even in an ISO file to attach to the VM. In all cases I receive this same error.I did verify the md5sum on the file to make sure it wasn't corrupted..
I want to upgrade the acs 5.1 in distributed system. We have one hub/ primary ACS and two other spoke / secodary acs. I have following querry. Will it be possible to upgrad only one Secondary server.>Will updated secondary ACS will able to sych it configuration with primary acs running on older version?Will updated secondary acs will retain the current configuration and authenticate the client.?
View 4 Replies View RelatedI try upgrade ACS 5.3.0.40 to new version 5.4.0.46. Everything looks ok:
ACS-machine/acsadmin# application upgrade ACS_5.4.0.46.tar.gz rep01 Do you want to save the current configuration ? (yes/no) [yes] ? Generating configuration. Saved the running configuration to startup successfully
% CARS Install application required post install reboot...
Broadcast message from root (pts/0) (Thu Dec 6 23:36:41 2012):
The system is going down for reboot NOW!
Application upgrade successful
But ACS machine (vmware instance) can't boot with this result: Volume group "smosvg" not found. (for details see attachment)
I have installed ACS Windows 2003 R2 Services Pack 2.
I am upgrading of version 4.1.1.23 to version 4.2.1.15. Recommended by Cisco.
Before of update everthing works fine.
After of upgrade, this does not authenticate user, sends the next message "External user not found", "Authentication session invalidated" and "internal error".
The mapping is ready. annex image.
I am trying to upgrade ISE from 1.1.0 to 1.1.2.145 but failed. Find the details below.
DR-ise-pdp-01/admin# application upgrade ise-appbundle-1.1.2.145.i386.tar.gz ISE1
Save the current ADE-OS running configuration? (yes/no) [yes] ?
Generating configuration...
Saved the ADE-OS running configuration to startup successfully
Initiating Application Upgrade...
Stopping ISE application before upgrade...
Running ISE Database upgrade...
% Application upgrade failed. check logs for more details.
Currently I am running Cisco ACS 3.2 ,now wanted to upgrade with the latest version along with the Authentication using AD , process/Document to upgrade the same .
View 1 Replies View Relatedhow to upgrade fromACS 4.0 to 4.2.1 with data restoring .
Currently i am running with 4.0 i need to upgrade to 4.2.1 windows.
I upgraded my ACS 4.2 on a Windows 2003 R2 Standard Edition SP2 Server to 4.2.1.15.9. The server seems to be running, I see that it is able to authenticate and authorize my logins and commands on Cisco devices. However when I try to launch the web access from the desktop of the server either with https://<ip adress>:2002 or https://127.0.0.1:2002 I get a message that the website cannot be displayed. When I nmap the server I see that port 2002 is open.
Any special trick how to reenable my web access?
we have a Cisco ACS 1113 SE running v4.0.1.44 and are trying to upgrade it to v.4.2.0.124 following the instructions to upgrade it to v4.1.1.24 first.
We are using the following CD "ACS SE Overall Upgrade CD ACS 3.3.4 and 4,1,1,24 Upgrades"
We can download the 4.1.1.24 image to the ACS appliance via distribution server but the upgrade fails- we obtained the following console output when attempted upgrade was tried;
Upgrade package was not verified
Applying this upgrade package may corrupt the appliance
Continue at your own risk!
[Code].....
I'm trying to upgrade my ACS 5.3 (patch 7) to ACS 5.4 and I've downloaded the application bundle from Cisco. I'm transferring the app bundle via FTP towards the VM containing ACS, yet I ALWAYS get %Manifest File not found in bundle. I've opened the bundle and found the manifest .xml inside.
I've double verified MD5 checks, size files, re-downloaded everything, even copied it to the local disk of the appliance. Also browsed through this forum to see that there are people having the same problem with other ACS version upgrades and besides re-downloading and using FTP there isn't a specific solution. I'm always getting this error. I know that it must be possible to do upgrade, but I'm stuck. I do see on the FTP server logs that the file gets transferred, but as pretty much as soon as it finishes transferring (not enough time in my view to extract a 1.2 GB file) I get an error
I'm doing the:
application upgrade ACS_5.4.0.46.tar.gz FTP
(...)
%Manifest file not found in the bundle
I have an ISE 3395 appliance that comes with ISE version 1.1.1.I've decided to upgrade it to version 1.1.2 patch 5 (latest patch version) and played with it for a few days. I set it up as a stand-alone box.
Now, I need to deploy this box as administration and monitoring. So, I put in the command "application reset-factory" to set it back to factory.Does it mean the ISE version of this box will still be at version 1.1.2 patch 5 and I will get a clean box to do whatever I want, similar to Cisco IOS of "write erase" and "reload" to have a clean box?
After upgrading to 5.2.0.26 I no longer seem to have a dashoard on the ACS View/Monitoring section.
View 5 Replies View Relatedwhat the "ACS 5.2 application upgrade package" is? I've seen this package on the download software area but couldn't find any document on this.
View 2 Replies View RelatedWe got 2 Cisco ACS 5.2.0.26.10.Primary server as authentication server and log collector.Secondary server as authentication server. Replication is configured. url..."There are some exceptions to this usual setup, which you can handle as described below: If the ACS 5.3 primary server also functions as a log collector in your 5.3 deployment, you should promote any one of the secondary servers as primary server in the deployment. See Promoting a Secondary Server to Primary "
This exception matches with my case. I have to promote my secondary server as primary.I would have :Secondary server as authentication server and log collector.Primary server as authentication server. I think I have to deregister secondary from primary server..According to the guide, I have to upgrade the log collector server. "Step 1: Choose any secondary server to become a log collector:" I dont have another secondary server..
This weekend we have upgraded the ios on quite a few switches on a larger site, the site is a mix of 2960 and 3560 switches and the previouse ios versions were 12.2.44 on most switches but some had an older 12.2.25.On monday when we came into work we got a call that most of the ports on these switches were an amber color and most people could't use the network.After some investigation we discovered that we had a problem with dot1x so for a quick solution we just removed it from the switches and restarted all the ports with no dot1x enabled,[code]
View 6 Replies View RelatedI have successfully installed the 5.0.21.9 patch and ADE-OS 1.2 update but when I attempt the 5.1 install via "app install ACS_5.1.0.44.tar.gz local" I get the error "Manifest file not found in the bundle."
Here is a debug of the install:
HOST/admin# app install ACS_5.1.0.44.tar.gz local Do you want to save the current configuration ? (yes/no) [yes] ? Generating configuration...Saved the running configuration to startup successfully6 [30662]: application:install cars_install.c[195]
[Code].....
I created the repository by TFTPing the file to disk:/Upgrade and pointing a repository to disk:/Upgrade. I verified the checksum of the file as it sits on my TFTP server and also manually extracted the file to verify the manifest.xml file is actually there.
I am facing an issue with several ACS appliances (some other work well) when upgrading to version 5.2.0.26.8.
When I launch the command acs patch install, I receive the following error message (we use FTP):
Failed to copy file '5-2-0-26-8.tar.gpg' from repository PatchRepository
(Error -302)
% Error: patch install 5-2-0-26-8.tar.gpg from repository PatchRepository - transfer failed (code 1)
This happens on three appliances but I could successfully upgrade 4 other appliances.
What is the reason behind this error code ? What could I do solve it ? I have already tried to create another repository on another server, without success.