Cisco Firewall :: ASA 5512-X DHCP Backup ISP?
Jun 3, 2012
I installed a new ASA 5512-X over the weekend for a client. Their backup ISP connection is DHCP based. I need to use the 'dhcp client route track' command on the interface, but it is not available. However according the all the documentation I am looking at and even the ASDM says it should be available.
This is the version of ASA and ASDM they are running:
Cisco Adaptive Security Appliance Software Version 8.6(1)1
Device Manager Version 6.6(1)
I did upgrade to the latest ASA software, so has this command been removed? If I do a '?' in the interface, there isn't a 'dchp' option.
View 2 Replies
ADVERTISEMENT
Apr 18, 2013
I'm looking to make a possible configuration for a customer. They need a device to provide :- firewalling- bandwidth limiting based on protocols, IP, users- web content filtering- good reporting to see which device/users are consuming most of the bandwidth.I used to use cisco ASA as firewall but it's a while I last installed on and I'm nt uptodate which current state.So I thought of using an ASA 5512-X but I'd like to know if it comply with all the requirements .Most important being the reporting and bandwidth limiting capability. It would be great to have some configuration example regarding bandwidth management.
View 1 Replies
View Related
Nov 10, 2012
I have a windows 2003 server and an ASA 5512
I'm trying to use SSLVPN and it was all working, and I don't believe any configs on either box have been changed.
On Friday people were connecting, but now I get a message "Login Error" in the browser. In the ASDM home 'latest ADSM Syslog Messsages' I get "AAA authentication server not accessible", followed by two messsages AAA Marking LDAP server in group as FAILED AAA Marking LDAP server in group as ACTIVE
When I go to configuration --> Remote Access VPN --> AAA/Local Users AAA server groups and click on my RADIUS server and click Test, it takes a while and says ERROR: AD agent Server not responding: No error
If I stop my IAS server on my Windows box i get the same error but much more quickly.
I have a sonciwall set up doing the same thing, and RADIUS seems to work happily, so I don't think it's the server config...
View 5 Replies
View Related
Feb 18, 2013
My collegue and I have been trying to figure out why we are unable to get this ASA to NAT Overload correctly. I'm sure it is something stupid, and the config may have gotten a little dirty as we tried to change options and make it work. FYI, we can ssh from the WAN into the device to configure it. It is communicating externally, but it isn't natting.
ASA Version 8.6(1)2
!
hostname ASA5512-X-Remote
enable password ********** encrypted
passwd ********** encrypted
names(code)
View 5 Replies
View Related
May 21, 2013
I have a customer who needs a 5512-X set up with two ports on the "Outside" interface and act like a switch on the outside. This is very easy to do with the way the ASA 5505 works just by creating vlans and treating the ports as members of the vlan.
View 3 Replies
View Related
May 14, 2013
I am having soem difficulty getting documentation and setup procedures for the new ASA 5512-X (or X models in general) firewalls.I know the IPS sensor is a software-based one, but I'm not sure how much different the setup in than with a 5510 and IPS module.
Also, is the IOS upgrade procedure different?
View 2 Replies
View Related
Apr 10, 2013
I'm trying to access our ASA 5512-X via the Management port, but the address https://192.168.1.1/admin can't be displayed.
View 35 Replies
View Related
Jun 9, 2013
I am configuring a brand new pair of ASA 5512s running 8.6(1). Traditionally we hae been using the Management port as the dedicated failover link, but that seems to not be possible on the 5512s.
ASA (config-if)# no management-only ERROR: It is not allowed to make changes to this option for management interface on this platform.
I have not been able to find anything in the official documentation mentioning this restriction.
View 1 Replies
View Related
May 2, 2013
I'm porting our configuration from a Pix 515 firewall to an ASA 5512x. What's vexing me right now is with the deprecation of the "static" command, I can't quite figure out the best way to Identity NAT my inside sub nets (multiple) to the DMZ sub net
So on the pix I have my identiy NATs as an example:
static (inside,dmz) <IntSubA> <IntSubA> netmask 255.255.255.0
static (inside,dmz) <IntSubB> <IntSubB> netmask 255.255.255.0
static (inside,dmz) <IntSubC> <IntSubC> netmask 255.255.255.0
Cisco's migration guide seems to do them one object at a time, which I guess is straightforward enough to do:
object network SubA
subnet <IntSubA> 255.255.255.0
[code]...
I'm thinking that there must be an easier way (aka less lines) to implement this for all the sub nets I want to Identity NAT to the DMZ.
1) Can I do this creating objects using a sub net with a net mask of 255.255.0.0 - one object to cover multiple internal sub nets?
2) Can I do this using object groups and trim this down to: (assuming I have to commands right)
Object-group network Inside_Subs
network-object <IntSubA> 255.255.255.0
network-object <intSubB> 255.255.255.0
network-object <intsubC> 255.255.255.0
nat (inside,dmz) source static Inside_Subs Inside_Subs no-proxy-ARP route-enabled. What would be the best way to translate my Identity NATs?
View 10 Replies
View Related
Mar 25, 2013
If you look at the data sheet for the 5512-X the High Availability section states "Not Supported; ActiveActive or ActiveStandby" while the ASA 5515-X states "ActiveActive or ActiveStandby". What does "Not Supported" mean for the ASA 5512-X? Does this mean HA does not work, or that I need to purchase an additional license to use the HA feature?
[URL]
View 5 Replies
View Related
Jun 7, 2013
I have a Cisco 5512 x Firewall connected with Cisco Layer 3 switch 3750.I have two different WAN connections, one for Data and one for voice. Cisco Layer 3 switch is configured with 2 different VLAN's one for data & other is Voice Vlan. Switch is providing DHCP to computers and IP phones. Voice Pool 192.168.10.0/24 Vlan10 and Data pool 192.168.20.0/24 Vlan20.I need to route my data & voice traffic separately. Cisco ASA is connected with two different ISP's. So, how can I do this configuration so that Voice and Data traffic will route separately.
View 7 Replies
View Related
Apr 8, 2013
What is the benefit of replacing 5512 for 5510.
View 1 Replies
View Related
May 1, 2013
I am having an issue where I can't connect to VPN after upgrading the license. The license upgraded is related to AnyConnect VPN. I noticed from the newly upgraded license, the Encryption-3DES-AES is disabled whereas previously it was enabled.
ASA 5512-K9
Version 8.6(1)2
View 2 Replies
View Related
Oct 31, 2012
I am currently trying to enable WCCP between a Cisco ASA 5512 firewall and Barraccuda Webfilter 410 Vx applicance. The ASA firewall is running IOS version 8.6(1)2 and the Barracuda is funning firemware 6.0.0.013. Both the ASA and Barracuda are in the same network and can ping eachother. The ASA has several interfaces, outside, inside, data and dmz. The PCs and barracuda appliance are behind the data interface. ASA data IP 172.16.18.1 Barracuda IP 172.16.18.40 All PCs in the 172.16.18.0/24 subnet use the ASA as the default gateway and should have web requests redirected to the Barracuda.
Below are the respecive bits of my ASA config
interface GigabitEthernet0/0
description Management
speed 1000
[Code].....
I suspect my issue is that the ASA is generating a Router Identifier of 172.21.20.1 which is my inside network and the barracuda cannot communicate with it. how I can get this working ?
View 3 Replies
View Related
Apr 7, 2013
From what I can find the ASA does not support policy routing.
I have two VLANS that need to go to the same destination but different routes. Anyway to accomplish this on the ASA?
View 1 Replies
View Related
Jan 11, 2013
Configuration of inter-vlan routing on ASA 5512 ver 8.6? I have everything configured (un-nat, access-list, etc.) but still not working. When i do a packet capture, it says the traffic is denied by the implicit acl. Here is my config:
interface GigabitEthernet0/0.100
vlan 100
nameif data
security-level 100
[Code]...
View 7 Replies
View Related
Aug 7, 2012
where I can find detailed documentation on these two products. Particularly, I am looking for high availability capabilities and any license requirements.
View 1 Replies
View Related
Jul 4, 2012
I have a problem with random host's geting the wrong source address on a ASA 5512-X 8.6(1). Right now there is a host, 192.168.25.108, showing up with 6.6.6.6 (fake) on whatsmyip.org, should be 5.5.5.5 like the rest of 192.168.25.0/24. In the xlate tabel I cant find anything wrong. Same yesterday with two host, that are using the right NAT address today.
nat (any,outside) dynamic interface. (5.5.5.5)
object network H-192.168.25.10
nat (inside,outside) static H-6.6.6.6X(code)
View 1 Replies
View Related
Sep 20, 2012
Just doing some basic testing before we replace our ancient PIX 515E with a new 5512. I have a mini lab set up following the diagram below, although I am unable to telnet through to the mail server's netcat listener on port 25 TCP. I can ping all the way outbound from 192.168.101.1 to 10.0.0.2, and the 10.0.0.2 machine shows it is translated properly to 200.225.117.1.
NAT and access rules are as follows:
object network mail
host 192.168.101.1
description Mail relay
access-list inbound extended permit ip any host 200.225.117.1
[code]....
EDIT: Somehow the new global access rule is involved. When adding a permit any any in there I can get to the mail server no problem. When I remove it but leave in my permit ip any any on the outside interface, I am denied?
View 3 Replies
View Related
Apr 3, 2013
if on the ASA 5512-X virtual contexts are supported with version 9.1 ?
I found different information on the Cisco web, the ASA datasheet says it is supported but in the configuration guide I found exactly the opposite information.
Cisco ASA Series General Operations CLI Configuration Guide 9.1 and 8.6 [URL]
Cisco ASA 5500 and ASA 5500-X Series Next- Generation Firewalls for Small Offices and Branch Locations Data Sheet (Updated) [URL]
View 7 Replies
View Related
Jan 10, 2013
Is the 5512 able to be field upgraded to a 5515 and so on through 5555? I.E. Can I add ram and other hardware to make the boxes more powerful as my requirements increase? I was hoping this would have been a new feature with the ngen firewalls.
View 3 Replies
View Related
Mar 8, 2013
I've been asked to deploy an ASA in Transparent Mode because of concerns of putting another layer 3 hop between PE and CE routers running BGP.
Is there some problem with allowing BGP to flow freely through an ASA the is also terminating site to site and remote access vpn tunnels?
I just don't see the need for Transparent Mode here and you cannot have a standard DMZ setup with Transparent Mode: you have to use bridge groups to provide for multiple interfaces on the ASA and then have an external router route between those bridge groups.
what I'm missing here as to why Transparent Mode is needed (not needed)
ASA is 5512
View 4 Replies
View Related
Jun 26, 2012
Does ASA 5512-X have a category-based webfilter build-in?
View 1 Replies
View Related
Jul 1, 2012
I have two routers 1921 and 2901 and both of them are connecting to one Reliable Internet Line from one ISP. 1921 master router and 2901 as a Slave. this is my question, how i can make a Backup DHCP Sever in 2901 as a same IP address generation?
Example :
1921-------> Ip Generator 10.1.1.0 /24
2901-------> Ip Generate 10.1.1.0 /24
both generate same ip address, when the Master is lost, Slave could be Covered the LAN.
View 4 Replies
View Related
Mar 17, 2013
I have created a VPN connection for ASA 5512-X by using the wizards and nothing seems to be wrong on the wizards's config.I am able to connect to the network by using the VPN but unable to ping internal network.Below is my config for your reference:
Result of the command: "sh run"
: Saved
:
ASA Version 8.6(1)2
!
hostname FAA-ASA-1
enable password crzcsirI44h2BHoz encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
[code].....
View 6 Replies
View Related
Dec 5, 2012
how can I enable an automatic power-on after a power failure on an ASA 5512-X?
View 5 Replies
View Related
May 8, 2012
I am working with a client that currently has an ASA 5505 with two ISPs for failover using a tracked interface. I would like to configure logging so that the ASA will email us when the Primary ISP goes down and fails over to the backup. Here is what I have so far...
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
switchport access vlan 12
[code]....
The primary interface is Outside and the backup is obviously Backup
View 2 Replies
View Related
Jun 13, 2011
I'm having problems configuring an asa 8.2(1) with a backup isp. I followed the asdm instructions in this document: [URL]
I have my backup interface configured as DHCP and the static routes set. Pinging the gateway and other external IP address from the backup interfaces works normally. I have also tried configuring the backup interface as a static address but got the same results.
When removing the primary wan link, all traffic stops. When I ping a external DNS, I get these errors in the log: portmap translation creation failed for udp src inside: 192.168.13.23 dst backup:208.67.222.222_type 8, code0)
I though this type of error is related to a NAT problem, not sure where to look though.
View 4 Replies
View Related
Dec 19, 2012
ASA5510 ios v8.4.I've setup dual ISPs and I'm trying to get ipsec VPN client access to work on the backup interface (outside-backup). The goal is to have outbound traffic on the inside subnet NAT'd through the main interface (outside) while inbound ipsec VPN clients connect and operate off of outside-backup.crypto map is applied to 'interface outside-backup,' however clients are unable to connect. If I switch the default route to go through outside-backup everything starts to work again.
View 1 Replies
View Related
Nov 21, 2011
I have setup ASA 5505 with 2 ISP, named outside (primary) and backup, the scenario is if outside down, then backup will take over, it works now. But it is not working when the primary connection cannot reach the gateway with the interface still up.
Is it possible when the primary connection cannot reach the gateway then backup automatically take over?
My configuration is:
ASA Version 8.2(1)
!
hostname cisco
[Code].....
View 4 Replies
View Related
Jun 12, 2013
I have a production ASA 5505 that is working perfectly. I wanted to take a spare ASA 5505 and copy the running config to it so that I would have a backup unit that could be swapped out if the production unit went down.
Both units have security plus and running 8.2(1). The only difference is that the production ASA has 512MB of RAM while the backup ASA has 256MB. Also the backup has anyconnect and the production unit does not.
I copied the running-config to my tftp server and then copied the running config from my tftp server to the backup ASA as startup-config. After reload the device booted with an identical configuration to my production ASA, but after swapping out the units to test it, I have no access to the WAN or DMZ from my LAN. Swapping back to the production unit and all works as it should.
I printed out the running config from both devices and compared them line by line. They are identical except for the anyconnect line on the backup ASAs config file.
View 5 Replies
View Related
Apr 5, 2011
I would like to setup backup ISP in our ASA5510. Right now the the firewall has for default gateway following command:
"route outside 0.0.0.0 0.0.0.0 114.324.321.33 1" i am changing this to route outside 0.0.0.0 0.0.0.0 114.324.321.33 10 track 1 ...so i can setup sla monitoring. As soon as i do the above command and remove the original "route outside 0.0.0.0 0.0.0.0 114.324.321.33 1" from asa then internet connection drops. Right now asa interface Ethernet0/0 has main isp configured and configuring interface Ethernet0/3 as backup. interface Ethernet0/3 name if backup security-level 0 ip address 114.324.321.34 255.255.255.252 no shut global (backup) 1 interface.
route outside 0.0.0.0 0.0.0.0 114.324.321.33 10 track 1 ( Right now in firewall i have" route outside 0.0.0.0 0.0.0.0 114.324.321.33 1 " ) route backup 0.0.0.0 0.0.0.0 115.283.212.23 20 track 2
track 1 rtr 1 reach ability
track 2 rtr 2 reach ability
sla monitor 1type echo protocol ipIcmpEcho 114.324.321.33 interface outside sla monitor schedule 1 life forever start-time now sla monitor 2type echo protocol ip Icmp Echo 115.283.212.23 interface backup sla monitor schedule 2 life forever start-time now. Also our firewall has site to site vpn and 1 main ip configured for exchange and remote access.
View 4 Replies
View Related
Sep 13, 2011
I need to implement the backup between two sites I have router 2800 which is having a point to point connectivity with the far end.At the far end there is no router ,only one firewall is there on that firewall one access-list is there to allow the traffic .To implement the back up link i have created a site to site vpn .But the problem is as soon as the tunnel is establised .For the time being i have removed by site to site config from both firewall.
View 7 Replies
View Related
