Cisco Firewall :: ASA5510 V8.4 Dual ISP And Port Forwarding?
Dec 17, 2012I'm looking for an example config of how to run dual ISPs while doing port fowarding for one of the publicly facing IPs. This is on 8.4 so
View 1 Replies
ADVERTISEMENT
Dual Routers Port Forwarding?
Mar 10, 2011I', trying to open my ports 80 and 37777 and have successfully opened them on my linksys router but behind that I have an at&t modem/router....My questions is how do I find the URL number to access my second router to open the ports on it also?
View 3 Replies View RelatedCisco WAN :: 2910 - Port Forwarding In Dual Setup?
Jan 10, 2013I have Cisco 2910 router that have 3 interfaces:
g0/0 - LAN
g0/1 - WAN1
g0/2 - WAN2
I would like to configure port forwarding in such way that connections to both WAN interface on identical ports will be redirected to a single host in a private network. When I issue command: ip nat inside source static tcp 10.10.10.X 8080 interface g0/1 8080 everything is fine, until I add the second command: ip nat inside source static tcp 10.10.10.X 8080 interface g0/2 8080
After that, the first statement is just replaced by the second one, not added to configuration.
TP-Link Dual-Band Wireless :: WDR4300 Port Forwarding For DynDNS?
Dec 18, 2012Region : UnitedKingdom
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23 build 120810 Rel.44064n
ISP : BT infinity
I'm trying to portforward on my WDR4300 to use Dyndns to view my Dreambox outside of my home network.I can not seem to forward ports, is there a guide to port forwarding for this router.basically I want to forward port number 12000 to my dreambox with local ip 192.168.0.101 ( with dyndns representing 192.168.0.101)
Cisco Firewall :: Dual ISP With Nat On ASA5510 V8.4
Sep 30, 2012At the moment we want to connect the ASA on two seperate internet connections . We create one LAN interface and two WAN interfaces. Now we want to create nat rules nat our outgoing traffic. After some research and testing (on a 8.0(4) asa) we have it working.
But now we want to implemate it on our ASA, but it works a lot differerent. I can't create a nat pool (at the 8.0(4) i can assign the second interface to the existing pool) wit two interfaces,
Cisco Firewall :: Broadcast Forwarding On ASA5510
May 8, 2012Situation: On a Customer Site we have a Cisco ASA5510 in routed mode, and we have 2 networks which are both routed fine. The Customer has one device+ on lets say Network1 and a device2 on Network2.
Problem: Device1 now needs to communicate with Device2. To initiate the communication Device1 sends out a broadcast to find other devices. How can we tell the asa to just take that broadcast from that specific device1 and "route" it through Netzwork2. Is there any chance to get this working?
Cisco Firewall :: ASA5510 Dual ISP And VPN On Backup
Dec 19, 2012ASA5510 ios v8.4.I've setup dual ISPs and I'm trying to get ipsec VPN client access to work on the backup interface (outside-backup). The goal is to have outbound traffic on the inside subnet NAT'd through the main interface (outside) while inbound ipsec VPN clients connect and operate off of outside-backup.crypto map is applied to 'interface outside-backup,' however clients are unable to connect. If I switch the default route to go through outside-backup everything starts to work again.
View 1 Replies View RelatedCisco Firewall :: Create A Dual DMZ In ASA5510?
Feb 29, 2012I want to create a Dual DMZ in a ASA5510 however it is not like I used to in ASA5505?In ASA5505 I create a Outside, Inside and DMZ VLAN and there after add the interfaces into the VLAN.This way I can have two DMZ interfaces, but how do I do it in a ASA5510?
View 1 Replies View RelatedCisco Firewall :: ASA5510 With Dual ISPs And Static NAT On Backup
Dec 12, 2012Looking to have an ASA5510 with two internet feeds. Moreover, I would like to have my static nat translations continue to work on the backup feed. I have outbound nat working, however I cannot get the inbound nat to work. I had this all figured out in 7.x but now with 8.x I cannot seem to get it working. If anyone has a 8.x example config.
View 4 Replies View RelatedCisco Firewall :: Change Default SSH Port On ASA 5505 (port Forwarding)
Dec 2, 2011So here is my network.
ASA5505--->Cisco1841--->Cat2960
Code
ASA asa831-k8.bin
Cisco 1841 c1841-adventerprisek9-mz.151-4.M2.bin
Cat 2960 c2960-lanbasek9-mz.122-55.SE1.bin
and here is my dilemma.
I can SSH from the internet to my ASA on default port 22, directly to my public IP. I can SSH from the internet to my Cisco 1841 on port 2001. I can not however, SSH to my Cat 2960. From what i can tell, on the Cat2960 i can't change the default port 22 for SSH to different port, just like i did on the Cisco 1841. I looked to see if I can change the default port for SSH on he ASA, it does not look like this is an option.
The bottom line is that i want to be able to SSH to all three devices from the internet. I only have one public IP. As of now, what i can do is only SSH to the ASA on default port 22 directly to the public IP and Cisco 1841 on port 2001. It appears that changing the default SSH port on Cat 2960 is not an option. It also appears that I can't change the default SSH port on the ASA, if i could, i would and then i should be able to SSH to the Cat 2960 on port 22. No matter what i did on the ASA, it always listens on port 22 for SSH connections.
show asp table socket
TCP 001f549f <<pub IP>>:22 0.0.0.0:* LISTEN
how do i make it listen on different port?
Here is relevent config for SSH for cisco 1841 (port forwarding)
ON ASA
object network ROUTER
host 10.10.1.1
[Code].....
Cisco Switching/Routing :: 881W - IOS Port Forwarding Commands For Port Forwarding
Apr 7, 2013I am trying to open up port 32400 on my 881w Cisco router but I have not had any success I need to configure manual port-forward to enable my Plex Media server.
View 1 Replies View RelatedCisco Firewall :: Port Forwarding In ASA 8.4.4 (1)?
Aug 9, 2012I have a cisco 5520 with 8.4.4(1) and I already have a NAT for an email server on it.Here is the IP and ports on current configuration:
Email Server Private IP: 1.1.1.1
Email Server Public IP: 2.2.2.2
Email Server Local Ports : 25, 587
Right now I have ports 25 and 587 opened for 2.2.2.2 so, now I need to add a port redirection for another port:
New Port : 8925
I need to redirect 2.2.2.2:8925 to 1.1.1.1:587
Cisco Firewall :: Port Forwarding In Pix 501?
Apr 11, 2013i'm having a problem portforwarding/redirection for the pix 501?I'm trying to open the ports 49003 and 40085 in order to view our dvr remotely and i'm not exactly sure how to it.
View 11 Replies View RelatedCisco Firewall :: ASA 8.4 Port Forwarding
Nov 5, 2012I have an issue with portforwarding in my teleeye cctv behind asa 8.4. I can browse the DVR outside via http however when i attempt to login, "server busy" will prompt afterwards. Note: Theres no issue when acesssing the DVR locally.
Heres my config.
OUTSIDE INTERFACE:
interface Ethernet0/3
speed 100
duplex full
[Code]...
Cisco Firewall :: ASA5510 Port E0 / 3 Not Showing
Mar 3, 2013I was enabling all the ports for testing on an asa 5510 and once I got to port e0/3 I got this error:
ciscoasa(config-if)# int e0/0
ciscoasa(config-if)# no shut
ciscoasa(config-if)# int e0/1
[Code]....
On the asa theres 4 ethernet ports 0 - 3 don't understand why port e0/3 is not listed. When a cable is connected the led's for that port goes green. Is the port just bad or is there a work around?
Cisco Firewall :: ASA5510 Port Failover?
Jul 30, 2012I have an ASA5510 and I would like to implement something like this: have two ports patched in and ready but only one active, the other one in standby (when the first one goes down the other port comes up and all the traffic goes down this way), all these on one physical box. So, it's basically like port failover on the same box.
View 1 Replies View RelatedCisco Firewall :: Port Forwarding With ASA 5510?
May 2, 2011i have a asa with a outside IP address of 140.32.121.5. behind this firewall i have a cisco MWR 2941 that i would like to connect to via telnet. its inside ip address is 10.10.10.2. my reasoning for this is because i cannot SSH or telnet from a ASA so i need to have the ASA push my telnet request to the router on its inside interface.i have tried some NAT examples but i am very green with NAT. i have also built access lists that look like the follow " access-list 101 permit tcp any 10.10.50.2 eq 23. and then tied the access-group 101 with the outside interface. this also with no success.
View 1 Replies View RelatedCisco Firewall :: ASA 8.4 Forwarding Port Range?
Oct 30, 2012I need to open port range 554 - 558 to a DVR on the internal network. Also, I need to NAT one of my public IP's to the DVR. How is this accomplished in 8.4? I was able to do it in an older version ASA software.
View 3 Replies View RelatedCisco Firewall :: Simple Port Forwarding On ASA 8.4?
Sep 4, 2012I've tried setting up some simple port forwarding on my ASA, where I want to forward one port on the external interface for both UDP and TCP to the same port on an internal server.
It works fine for UDP, but all TCP packets are dropped on the outside interface, even though the configuration for UDP and TCP is basically the same! This is my config:
object network MY_SERVER
host 10.10.1.4
object service TCP_MY_SERVICE
[Code].....
Port count goes up on line 2 (UDP) but never for line 1. I just see the packet denied instead. Same thing happens in the packet tracer, a packet destined for my external interface on that port for UDP is allowed and NAT'd just fine. TCP it gets dropped by the ACL on the outside interface.
Cisco Firewall :: ASA 5510 And Port Forwarding?
Oct 23, 2012I have a Cisco ASA 5510 appliance running ASDM 6.3 We have a number of public IP addresses associated with our company. In order to utilise the IP addresses effectively I want to use one puplic IP address for two servers running on different ports.e.g.
Public IP address 78.109.174.100
for both
Server 1 HTTPS and HTTP
Server 2 FTP
Both Servers live in the same subnet (DMZ) I believe this maybe port forwarding but could be completely wrong. I've tried creating a NAT rule that goes from Server 2 Network object to Server 1 external but this didn't work.
Cisco Firewall :: Port Forwarding In 5505
Feb 25, 2013have a couple of ASA 5505's which work fine for what they are doing VPN and all that - we have 1 DLINK DFR-700 Firewall left and I need to get a new ASA to replace this since it is old.All this box really does is port forward external clients to 1 address on the internal lan for client software updates.So lets say we have client a with IP 1.1.1.1 and client b has 2.2.2.2 - at the moment this is what happens client a and b come in through http and get mapped to the internal http server 10.10.1.2So I need to setup about 100 clients which can come in through http only - get mapped to the internal IP and also keeping the internal server to be able to access anything outside.
View 16 Replies View RelatedCisco Firewall :: ASA 5505 Port Forwarding NAT
Dec 6, 2012I have ASA5505 and am having issue with port forwarding NAT . [code]
View 11 Replies View RelatedCisco Firewall :: ASA 5510 8.4 Nat And Port-forwarding?
Jun 6, 2013I'm trying to forward an internal service on a internal server to the external interface on the same port on the outside interface of our ASA.I been searching for a solution for days and found nothing.Here are the relevant parts of my config:
: Saved
:
ASA Version 8.4(2)
!
object service TCP-WebServer-8080
service tcp source eq 8080
object network WebServer_Object_10.1.10.7
host 10.1.10.7
[code]....
So it looks like it's being dropped by an ACL, but it looks right to me.
Cisco Firewall :: Port Forwarding Using ASA 5510
Dec 3, 2012I have a ASA 5510. I want to access the internal server IP through the ASA via http://60.54.x.x:8080/sms/DnNotify ( via port 8080).How do i configure it? NAT? ACL? configure port?
View 3 Replies View RelatedCisco Firewall :: Port Forwarding On 5505?
Sep 1, 2012I have the following configuration in my ASA 5505 and I'm having problems connecting with other players on my XBox (moderate NAT).
I think my problem is that I need to forward ports tcp:3074, udp:3074, and udp:88 to my xbox which is at 192.168.2.50 (vlan 3 below).
[code]
# sh run
: Saved
:
[Code].....
Cisco Firewall :: Port Forwarding With ASA 5505
Oct 1, 2012I am trying to forward specific ports from the outside interface on my ASA5505 to my servers inside and can not get it to work! I have a VPN that currently works and the firewall rule in place I am just overlooking something simple I'm sure. Here is the config:
ASA Version 8.2(5)
!
hostname ASA
enable password <removed>
passwd <removed>
[Code]...
Cisco Firewall :: Port Forwarding In ASA 5520?
Oct 3, 2012I am trying to forward all the traffic of a particular port number to my outside interface forwarded to an internal IP address.
View 1 Replies View RelatedCisco Firewall :: PIX 515e Port Forwarding
Apr 2, 2012I'm having issues both with port forwarding and VPN with my PIX. I've tried different ways to set up port forwarding for remote desktop, but I still haven't had any luck.
With the VPN, I can secure a connection into the PIX, but I cannot access the internet or ping any of my devices on the remote network.
hostname PIX-515E-1
domain-name #####
enable password ##### encrypted
passwd ##### encrypted
names(code)
Cisco Firewall :: Open Port On ASA5510 (version 8.3)?
Jan 29, 2013I configured ASA to open port 21, 3389, 5900 (outside access in) but when i check port just success : 21 and 3389, Error: 5900 If i configured with only one port 5900 or 3389, is't ok, i don't understand what 's the problem?
ASA5510>
ASA5510> ena
Password: ***********************
ASA5510# show run
: Saved
[code]....
Cisco Firewall :: Setting Up Port Forwarding ASA 5505
Mar 15, 2012We are trying to setup our ASA 5505 to do port forwarding to multiple internal servers and have run into some issues. A little background on what we are trying to do.
We have 1 static external IP. Internally we have one exsisting server (10.1.1.184) that has port 80 forwarded to it and another exsisting server (10.1.1.185) that has port 443 forwarded to it. Both of these servers are serving seperate web apps to our employees who of course use them offsite. We have now added an additional server (10.1.1.186) that needs to use both ports 80 and 443. Is there any way to set it up so that these ports can be forwarded to all the servers that need them? Also, how would this work as far knowing what traffic will need to go to which server even though it is using the same port?
The equipment is: ASA 5505ASA Version 7.2(4)ASDM Version 5.2(4) I appologize in advance if what I'm trying to do is difficult/impossible. I inherted the ASA 5505 at this location and I was not here when it was initially installed. In fact no one on staff was here when it was initially installed. I did manage to find the passwords to it though. I'm not at all familiar with the ASA 5505 or Cisco secuirty appliances in general.
Cisco Firewall :: Enable Port Forwarding On CLI For ASA 5510?
Aug 21, 2011how do i enable port forwarding on the CLI for ASA 5510. outside subnet is 192.168.1.0/27. when i try to ping another IP with that range i can't access.
View 37 Replies View RelatedCisco Firewall :: Vnc 5950 - Port Forwarding Not Working
May 4, 2011All I want to do is have VNC connect on port 5950. So I want to forward traffic coming in on the external ip address on port 5950 an internal ip address on port 5950. Here is my config:Building configuration...Current configuration.
View 17 Replies View RelatedCisco Firewall :: Port Forwarding A Range Of Ports (PIX 6.3)
Dec 5, 2012I have a network with multiple servers behind a PIX with 6.3 on it. I have one public IP address, and I'm using NAT. I'm currently trying to port my Exchange server to a cloud host, and the vendor is requiring I open up a wide range of ports for MAPI, basically ports 1024 on. What would be the command to forward all of the trafic cominto/from that broad range? if I could simply route all trafic to and from their two IP addresses to my email server, that would accomplish the same end goal.
View 3 Replies View Related