RV180W wired lan has no access to internet. VLAN is disabled ja router get ISP IP and DNS without any problems. PC ping respond DNS name query OK but web browser can not open or show pages (time out error). All router traffic between wired and wireless network the works just fine. Wireless network web traffic works without any problems. Router firmware is lates 1.0.1.9
View 2 RepliesI got : RV180W router updated with the last firmware.Static IP for the DMZ host (Synology Server 212+) My problem is that I had try all combinaison since 10 days to get IP source in synology interface (to block IP's of bad connections...) but, I only see the RV180W adress....So impossible to block bad connections IP.
View 3 Replies View RelatedI would like to ask if what is the difference between RV180W-E-K9-G5 and RV180W-A-K9-NA specifically the -E and the -A. As far as I know -A is the compliance code for Philippines. Am I right? If yes, what about -E? There is a documentation for wireless complaince on Aeronet devices but what about these SB products?
View 9 Replies View RelatedI have a customer with a RV180w running the latest firmware. We are currently using the router as a router and to provide wireless access. We want to add wireless coverage and I am interested in our options. We have a ethernet backbone which we could use to give the new AP LAN connectivity. Can we buy another RV180W and use it in AP mode and provide roaming wireless connectivty. The client wants a guest and business WLAN so we will use the VLAN feature of the router. How do we configure the new AP? Do we need to use WDS? If we use WDS, can we still use WPA2?
View 6 Replies View RelatedBelkin N750 Router - wired connection can not access Internet. I've tried direct to modem and have no problem, have tried old router, no problem, but if I shut down desktop completely (Win7) and restart, I get no connection. Uninstalling the NIC (Intel 82579V Giga) and restarting, then I get connection again. However, if I start in safe mode with networking, I have no problems at all. I've disabled my firewall to no avail.
View 3 Replies View RelatedLooking for a SOHO device that could accomplish not only to connect people from home to Internet, but also to let me remotely access my work stuff (from my home office), RV180W sounded great and really cost effective. I could connect to Internet, FROM Internet, separate home, work and guest VLANs, all in just one device... sounded just GREAT! Bought one but (unfortunately) I have to say I'm quite disappointed with its performance, outnumbered errors (how many!) and continuous lost of Internet connectivity (can't stay a full day without one).I've searched a lot (not only here) and tried many things, listing some:
- Upgrading firmware (now v1.0.2.6): done several times, once with nothing connected to the router besides a local wired laptop, to ensure integrity
- Resetting to factory defaults and performing a "clean configuration", from scratch (done several times)
- Disabling Firewall functions (once all of them)
- Checking the real need of every option and making sure I had just the ones I needed configured
I have (in a very "consistent" way) the following problems:
- Poor performance (it's clearly much better when I directly connect to the cable modem's WiFi OR to another router connected to this cable modem). I could say that it seems to have 50% of the performance I had with my CISCO/Linksys E4200 and Netgear "elder" routers.
- Persistent disconnections / resets: Sometimes it happens only with wireless, sometimes it looses the "Internet forwarding capability", retaining the local wireless connection (to other devices), sometimes it seems to make a full reboot (including a new DHCP request to cable modem). In a day this happens several times, I'd say from 3 to 15 times, depending on the day (couldn't figure out why).
CPU utilization is always shown as being 100%, what sounds amazing, because:
- There are usually just 4 wired connections (3 storage devices + 1 Desktop) and at most 5 wireless connections (including my laptop connected to the main VLAN and 3 Android devices and 1 "guest" laptop connected to GUEST VLAN)
- The utilization % remains when I have jut one laptop performing Internet browsing and nothing more
- VPN wasn't enabled yet (and it will be, as I want to remotely connect to my home office) [code] ......
We have the RV180W router and the WAP321 access point in our business. We want to broadcast two SSIDs from both locations: the office SSID, which shares routing to LAN traffic, and a guest SSID.The office computers are attached via ethernet to a switch off of LAN port 1 on the router. The AP is attached to LAN port 2 on the router.On the router, the office SSID and the LAN are members of VLAN 1. The guest network is a member of VLAN 2. From the router, everything works just fine.On the WAP, the staff SSID works fine, but the guest SSID has no internet. Both the office and guest networks get DHCP successfully from the router.Our VLAN membership table in the router and WAP are attached, as well as other configuration details.Why would we not be getting internet on the guest ID only on the WAP?
View 8 Replies View RelatedI am considering to buy two RV180Ws and place them on two separate locations. But before buying I would like to make sure that the units meets my requirements. Lets call the locations A and B. I would like to connect location A with full network access to location B. But at the same time I would like to have that location B also gets full access to the network at location A.Besides this I would like to be able to connect to one of the networks from remote with my laptop.Preferably all connections should be made using IPSEC and not PPTP.I would like to know if it is possible to make such a configuration, and eventually if there is a smarter way to do e.g. only letting clients connect to location A or B and granting them access to all ressources at both location A and B from there.
View 1 Replies View RelatedI installed the RV180W yesterday and decided to play with it a bit today. I got stuck on the firmware update. Tried different browsers on different PC's. Tried going to 1.0.1.9 first. I have the "reset all configurations" button checked. After looking through the posts here I'm not sure this firmware will even fix my next few problems(port forwarding etc). Is there a trick with this device?
View 4 Replies View RelatedI'm trying to make the VPN connection between two routers CISCO RV180w.I performed the basic configuration in cisco "server". I did the same in cisco "client".The following configuration and logs, do not know what to do ...
SERVER CONFIGURATION:
IKE Policy Configuration:
VPN Policy Configuration:
CLIENT CONFIGURATION:
[code]....
We have installed a fiber internet access and have the ONT from the provider already installed.We're trying to use the RV180W to use this internet connection. [code] So I need to configure the router with the .36 static IP on the WAN, and using the .37 gateway and the provided DNS servers. I also need that this WAN is tagged with VLAN ID 20. I'm only able to set VLAN ID on the LAN ports via the admin interface.
View 8 Replies View RelatedI am struggling to configure my new RV180w router to accept a VPN connection from my Apple computers.
I wish to use IPSec with Group and Pre-Shared Key authentication. The RV180 has just replaced my 800 series ADSL router and I want my remote clients to be able to connect using either the VPN client capability built into the OS X operating system or the Cisco VPN Client software installed on their Macs.
So far, using the RV180's web setup screens, I have created a VPN Policy and a corresponding IKE Policy was created as well. I couldn't see anywhere to include the 'Group' name. I have created a user but wasn't sure of which Protocol to use so I am trying XAUTH.
At the client end some people are connecting using Cisco's VPN Client software Download Software - Cisco Systems
Some people, with OS X 10.6 and above, are using the Mac OS X network built-in VPN client.
We all connected without a problem to the previous 800 series router using IPSec with Group authentication and Pre-Shared key.
i've installed the new firmware on my router and now the UC is showing 100% all the time. I've tried to factory reset it, it's doing the same thing. If I downgrade to previous firmware, it goes back to normal . I've only 1 PC in my network (test lab), so no big traffic here. is it a bug ?
View 1 Replies View RelatedCan I have a wireless access point connected, by wire, to say 2 PCs and a wireless router connected to the internet (+ other PCs) and the link between the access point and router is wireless (i.e. not wired)
View 1 Replies View RelatedI just recently switched from the WRVS4400N to the RV180W. I have 4 VLANs, and I want VLANs 1, 2, 3 to communciate freely, but I DONT want VLAN 4 to communicate with anybody, just Internet access. On the WRVS4400N, I was able to do this using the Firewall > IP Based ACL. I notcied that the RV180W, does not have such an option. I am sure there is something I am missing, I just cant find out how to isolate VLAN 4.
View 5 Replies View Relatedwe've changed our rv042 for a rv180w and now when I try to upload files to my ftp server (vsftpd under centos) it get stuck at 100%.I've changed my ftp server to proftpd instead of vsftpd and everything's ok.but vsftpd isn't the problem since i was able to upload with my rv042 without any problems.so i guess there's a problem with the rv180w security.i've already disable stealth mode and it's doing the same thing when i try to upload to the same server but through the vpn tunnel, everything's ok.So it's really in the rv180w lan->wan routing
View 10 Replies View RelatedHave not purchased RV180W at this time, therefore have not read manual. Need for small office, 2 VPN logins max & not 24x7 use. What VPN client software ? (using Win7-64bit laptops)
I did notice software called Quick VPN Client 1.4.2.1 for download.
Does buying RV180W allow download of Cisco Systems VPN Client software ?
I am located in UK which uses PPoA for ADSL broadband. I use a DrayTek Vigor120 ADSL2 Modem to act as an ADSL bridge and PPoA to PPPoE converter. This passes the ADSL authentication requirement (and subsequent single static IP address) to the Cisco Small Business RV180W sitting behind the Draytek. However, the RV180 (Firmware Version 1.0.0.30) cannot form the PPPoE connection. I have tested the modem, adsl username and password by creating a PPPoE interface on my computer and connecting this directly to the Draytek modem. The computer receives the expected IP address and I can ping remote public IPs. I have entered the username and password into the PPPoE profile,
Authentication type: CHAP (confirmed by ISP but I have also tried all other options just in case).
Connection Type: Keep Connected.
MTU Size: 1400 (also tried default, which worked OK on computer interface).
MAC Address Source: Use Default (I have successfully used combined modem/router so a "fixed" MAC address is not required).
I live in China. I want all of my PC's and devices to connect through the RV180W VPN Router to a VPN provider in the US so that all of my traffic is encrypted and appears to have a US IP address. I need to find a VPN Service Provider that supports the RV180W and how to configure it. I don't want to configure every PC and device, I just want them to use the VPN conneciton at the router.
View 3 Replies View RelatedI am using DynDNS in lieu of a static ip. My ISP changed my WAN ip last night as expected however the RV180W did not update the WAN ip, and so the router is now offline. Using a secondary internet connection I have logged into DynDNS.com and checked my hosts file and confirmed the ipa has not updated since March. I changed the update period from 360 to 2 so this never happens again, but I need to now change the WAN ipa in the RV180W to match the new one. I remember a screen that shows the current WAN ip address greyed out under the present one, but I dont recll where to go to get to that. I am at a loss as to where I go in the RV180W to change the WAN ip address.
View 1 Replies View RelatedWe are deploying over 20 RV180W Routers for a client and need to find a faster way to configure them for shipping.We have created a base image (all settings that will be shared between the 20 locations), we need an easy and quick way to make IP changes for the 3 VLANs and Local Security Groups for the IPSEC VPN.I tried to edit the CFG file by hand, but the checksum fails when it is loaded into the RV180W.How can I accomplish this? Can I manually create the checksum?Can I remove the checksum?
View 3 Replies View RelatedComcast has indicated that this is required for IPv6 to work, and since it means gatting a /64 address space for my network I am understandably eager to tak advantage of this new functionality when it is available in my area.
View 44 Replies View RelatedI am wanting to purchase the RV180W for a small Optometrist office. We are beginning our transition to EHR and what to ensure the RV180W is HIPAA compliant and if not what would be the next best product for about the same price?
View 2 Replies View RelatedI have rv180w (firmware 1.0.1.9) and 1 Gbit/s internet.When i turn on WAN Traffic meter, WAN speed down to 100mbit/s.I didn't find any suggestions in official documentation.Is this a bug or undocumented feature?
View 2 Replies View RelatedOur company own a RV180W router. It works well with firmware 1.0.1.9 but with firmware 1.0.2.6 it is impossible to SSH between our devices. Ping still works though.
View 1 Replies View RelatedI have the followint setup:
VLAN1 = 10.1.10.1
VLAN2 = 10.1.11.1
Inter WLAN routing is enabled on both VLANS
I have VPN PPTP set to 10.1.10.50-60
When I connect the VPN I get an IP address of 10.1.10.55 I can ping the 10.1.10.x network i cannot ping anything in the 10.1.11.x network.
I need to be able to see (ping/access by IP) both VLANs from a VPN PPTP connection.
need The Firmware for the device....URL
View 5 Replies View RelatedI can't seem to satisfy with the RV180W. I've set a firewall block rule for certain traffice lan>wan, and I'd like to view the log.
Administratration | Firewall | Firewall Logs, I can select any or all items. Where do I view the log?
I can go to Logging | Logging Policies and select everything for the 'default' policy.
No matter what, I go to Status | View Logs, and select whatever severity level I want but get little to nothing, and definitely no firewall logging.
There are 6 part numbers for the RV180W router. What is the difference between them: wan access (Annex A,B ...) or other quality?
View 1 Replies View RelatedWe just recently invested in 5 RV180Ws to serve as replacements for the aging routers in 5 of our shops. Additionally, we bought them because they seem to offer robust WiFi options for customers/guests, such as multiple SSIDs and restricting 'public' traffic to it's own VLAN.
Straight out of the box we updated them to the new firmware, 1.0.2.6, set up 2 SSIDs (one hidden for employee use, and one broadcast for customer use), and plugged them in.
Everything seemed to be going great until we walked to the other side of the shop and watched the signal drop off almost completely. These are fairly small premises and the router can't be more than 8 metres from where the customers are, and yet the signal is so weak that it's almost unusable.
For reference, we have the WiFi running in B/G/N mixed mode to maximise compatibility. with the channel and width set to their defaults (Auto and 20MHz, I believe).
Moving the routers is only semi-viable; these are meant to serve as replacements for existing IT equipment, and the cabling situation means they can only really go in the office space near the rear of the shops. Also, it simply shouldn't be necessary; WiFi should extend well past 8 metres without issue.
Have not purchased RV180W at this time, therefore have not read manual. Need for small office, 2 VPN log ins max & not 24x7 use. What VPN client software ? (using Win7-64bit laptops)
I did notice software called Quick VPN Client 1.4.2.1 for download. Does buying RV180W allow download of Cisco Systems VPN Client software ?
Recently I bought a Cisco RV180W and would like to setup an IPsec VPN server for my team. However, it's asking for the remote client's IP or FQDN. How would I know the client's IP if I'm using WiFi connection from different places? Also, I'll be using my iphone to connect and the IP is not static. Is it Cisco not going to support this feature or already working on a fix? I searched the internet and some of the old topic on this forum. Seems like it's an old problem for RV220W and I don't see any intension that Cisco is going to provide a fix.
Also, I have an NAS and a PC connected to the RV180W on LAN. Seem like it's not possible remotely turn them on using Wake On LAN.
I am trying to set up DDNS for my network. Right now there are only RV180W for DDNS providers (DynDNS, TZO, and 3322).I wanted to use a free DDNS provider, however DynDNS and TZO are now pay only (or only a short free trial via credit card). 3322 seems untrustworthy, as Google is reporting that it is a security risk?Anyway, my question is: "Is there a way I use another DDNS service other than the ones offered by default in my RV180W?"
View 0 Replies View Related