We have a 5520 ASA running 8.4(2). We are trying to setup Clientless VPN access to our SharePoint 2010 environment. We have most of it working, however there are a few things that do not function right in SharePoint via the VPN but function fine internally. Are there any special things to configure specific to SharePoint? Some of the things that do not work include the SharePoint ribbon, up level function, opening of documents within SharePoint, etc.
Im testing ASA 9.0, that according to the release notes should support SharePoint 2010.But I still get the same problems I had with previous versions: the ribbon does not show up (just a loading spinner) and javascript popups do not show as well.
I have setup clientless SSL VPN on my ASA. User authentication is done by RADIUS using ACS 5.2, I have created two portal one for IT department and the other for auditing department but the user in auditing if the select IT group from the drop down list they can login to it, my question is how can I make them login to their group only and prevent them from accessing other groups ?
I have setup load-balancing on an ACE 4710 for HTTP for Sharepoint 2010. The Server Admin says that the IIS server will recognize the right site by DNS name. Problem is I have no clue how to make sure the servers get the DNS name passed to them. They says this is for a multi-homing setup so that we can run multiple sites using the same VIP to the same Serverfarm. How do I do this? I keep getting the IIS splash page since the real server cannot determine the IIS site that I am supposed to access.
i am working on a project with 2 security ASA's 5520 with Microsoft ISA/TMG-2010 Server having 2 DSL's my question is regarding the designing issue where should i connect the 2 DSL's using ISA/TMG-2010..
We are having an issue with the the ASA RDP2 plugin, it has been working correctly since the installation of the ASA 2 years ago.1 month ago the functionality stopped working in IE activeX. I performed an upgrade of the ASA software in an attempt to fix, unfortunately this has not resolved the issue. Reimporting the plugin has not solved our issue either.
When using the Java client, there is a warning that -"The terminal server disconnected before licence negotiation completed. Possible cause: terminal server could not issue a licence"When a user clicks on a bookmark or types in a server name that is associated to the RDP2 plugin, the page timeouts and goes back to the home screen of the clientless SSL vpn.
I need to move the client machines off of the 3750 (and their DHCP dependency on it) to the SGE2010 and absolutely route their internet traffic out through the outside interface on the 5505. They must also be able to communicate back into the internal environment in order to communicate with the production servers.
The clients currently use .254 addressing through a dumb dell switch to the 3750 but I am trying to migrate them over slowly to the .253. I know that the 2010 will not do DHCP, so I am putting a DHCP server on that switch right now. The 5505 won't let me add an additional nameif statement onto one of the other eth0/x interfaces and I'm not sure if that has anything to do with it's capabilities to act as a DHCP server (it's not an option in the ASDM) or it's ability to serve as the internet gateway for the 2010 clients. (Side notes: The 5505 has a base license and is currently also connecting 1 site to site VPN. As is the 5520, so all of it's interfaces are used as well).
I statically assigned a moved client with a .253 address and plugged it into the 2010. I have tried giving the 2010 both a .4 address and a .253 address but neither will allow me to ping any of the addresses on the 5505. The 2010 shows automatic routes to the two subnets and I set it's default route to 253.1. The link between the 2010 and the 3750 works - clients receive a .254 address from the 3750 and can get out to the internet via the 5505 and reach the production servers as well.
Why won't the 2010 see the 5505 as a gateway and allow clients to get to the internet and also traverse the 3750 when they need access to the production network?
The reason why I dont' just connect the two swtiches and call it a day is because I also need the production servers to ALWAYS go out/receive web requests via the 5520 outbound/outside interface. I'm having such a hard time wrapping my head around why i can't get my clients moved over to the new switch, I haven't even grasped how I'm going to do that yet.
I am new to v5.3, and I am not good at VPN.I just have my consultant to configure this correctly just today. Currently, there is only one rule for the access policy (Single Result Selection). That rule is to use Active Directory as the source for the authentication. And by default will deny any other access which is not found in the rule.Now... I just got an order that I need to setup a new user who will need to access to our network by using Cisco IPSec VPN (the software one). But that user is not setup in our Active Directory, and we do not want him to access our domain anyway. He only needs to access non-domain resourse...such as airconditioning controller by IP. So I am thinking to setup his account by using "internal identtity". If I do this way, what do I need to do to setup another access policy? May you give me some steps with little more details? OR... if it is not the way I should do...what else can I do to achieve this goal? Also, he said he could provide his static IP trying to access from. I have a ASA 5520.
Configured Clientless SSL VPN Access and it works properly for everything except connectivity to an HP iLO. When I go to the http address, I see the redirect page come up but as soon as it goes to the https page, I get the following:Connection failedServer 192.168.10.252 unavailable. It happens on any HP iLO web sites I try to connect to.
I have configured a ASA5510 for clientless access by using the ASA http bookmark. The web server require an authentication by sending a web server logon screen. If I enter the user credentials at IE7 or IE9 browser on the the web server logon screen the authentication fails, the web server logon screen appears again and again without any error message. If I use the firefox browser instead of IE browser the web server authentication works without any problems. These problem appears only by using the ASA device, the local lan access with IE7 and IE9 and web server authentication works without any problems. Is that possible to configure the ASA http bookmark with the domain credential?
I have a ASA 5520 with a functional IPSEC VPN using the Cisco VPN client. This allows my remote users (Staff) using laptops to come in from anywhere on the Internet and tunnel in. Works great.Next, we need to stand up a VPN over a Juniper SSG5 so that when we have groups working outside of our network, they can tunnel back into our network. If they were going to be coming from a known, fixed IP, or even netblock, we'd probably use Route-based setup from a Juniper SSG5 into the ASA 5520. But they may very well be coming from any IP. I am thinking this leads us to Site-to-Site VPNs- it won't be Network Client access obviously, nor will it be Clientless (browser-based).
I need to setup an ASA 5520 to correctly NAT over two wan links. The idea sounds pretty straingforward but it does not, I have only 2 IPs that are involved with the NAT
I have 2 interfaces that sould be applied to it let's say outside1, outside2. The server is reacheable through each outside interface, the outside interfaces is selected uppon dynamic routing and that is working OK.
So if link outside1 is up the Nat follows this schema 192.168.1.10(inside) -- 172.16.1.10(outside1)
that works fine, but I want that automagically changes over when the link outside1 is down to 192.168.1.10(inside) -- 172.16.1.10(outside2).I know I can't have a NAT with 2 IPs and 2 different interfaces (ASDM doesn't allow me to), is there a way to implement this??
All routing in the network is Ok My customer want to access a server @ ip 10.194.70.1 in https on the interface Interco with his nat address as 10.97.0.11 .This server must be accessible with the address 10.97.0.11:443 from interfaces inside, outside and other sites.And source address must be nated with original destination address 10.97.0.11 to be redirected on 10.194.70.1.
I am working on IPSec Passthrough on an ASA 5520, with version 8.3, and ASDM 6.3. Currently I have a requirement for users in my internal network (10.10.249.128 / 25) to be able to connect to external IPSec VPN servers.
So I created a network object with 10.10.249.128 / 25, and used dynamic PAT to translate the source ip address to the external internet facing outside interface:
I then added the following rules on the inside-in ACL: However troubleshooting shows that isakmp is passing through the firewall, but esp and ah is not.
For isakmp:
For ESP:Seems like the nat rule is drawing my ESP traffic,
I would like to ask if the ASA5510 can support TLS 1.1 above?On the ASDM it can only be chosen between SSLv3 or TLSv1.When "Negotiate SSL V3", the Active-X plugin can not be loaded (IE 9 with supported SSL v3). It seems that the plugin only works with TLSv1.Is there some roadmap for the TLS1.1/1.2?
I am running two ASA 5520 routers synched up with eachother. I had a massive connectivity issue this weekend that I am investigating. Now I have figured out how to get the live logging but I need to know how to get the old logs from my router.Also I am looking to set up a log dump that could happen daily or perhaps weekly.
I have been tasked with attempting to setup an enviroment that allows users to VPN from home and use Dameware to connect, from home, to another machine in another users home that is VPN'd into the same network. Is this possible?
I am setting up a clientless SSL VPN and AnyConnect on a ASA5510 running 8.4. When I login to clientless SSL VPN I get a menu with AnyConnect showing as an option. When I click on that AnyConnect it try to load. Half way loading an error message pop up.Error message:The secure gateway has rejected the connection attempt. A new connection attempt to the same or another secure gateway is needed, which requires re-authentication. The following message was received from the secure gateway: No address available for SVC connection.When I load AnyConnect seperately then it works. I don't have that problem when using 8.2.
I am trying to setup an active/standby failover with 5520's running 8.4(2) and am having problems with it not dropping connections during the failover. I am using a portchannel from the switch to each ASA and using sub-interfaces off that. I'm using the command Failover mac address Port-Channel1 “mac-address on primary Port-Channel1” “mac-address on standby Port-Channel1”.The command goes through but doing a show interface port-channel1 doesn't show a change in the mac address on the secondary unit after a failover when it becomes active.
I have issues connecting to the webvpn as its asking for some certificate for authentication, I am using the self generated certificate, but when I try to connect to SSL gateway via its IP address , Browser expect me to provide the certificated, I want to tell the Browser to use the self generated certificate of ASA5505, but not sure how I do it.I undestand when WEBVPN/SSL clientless VPN try to establish the VPN , ASA sends the certificate back to the browser to accept/authenticate it, but when I connect I don't get any certificate where I say YES to accept it.Can I just disable certificate with SSL and just use username/password to crater a WEBVPN ?
I am configuring it with our ASA 5540 default 2 SSL License. I have got 10 demo license from Cisco, however I am yet to activate it.
I have problems is accessing SSH and Web Services.
1) SSH: When I try to ssh one of my device, it ask me to give me Username and Password. After that it it shows the full black screen and do not ask me to provide Enable password. But Telnet is working fine.
2) WebService: We have one web service (internal). 2 webserver connected to cisco css 11501. the URL is http://10.10.10.10/web. I try to access it from the WebService page with giving 10.10.10.10/web and 10.10.10.10 using http protocol. but it shows that the server is not reachable.
I have a Cisco ASA 5510 8.2 (3) with clientless SSL VPN portal enabled with some bookmarks pointing to internal servers. I just installed a new Mac OS Lion Server 10.7 box and have a share on it using both AFP and SMB. My old Mac server is 10.6 with a similar share with both AFP and SMB enabled. When using the Portal browser (or bookmarks pointing to cifs://example/server), I get an error "Error contacting host" to the the 10.7 box, but browsing to the 10.6 box works fine.
I have double checked all settings on the 10.7 and permissions, everything appears correct. I can also browse internally via SMB from Windows XP/Windows 7 using default UNC paths \exampleserver, etc., to the 10.7 box.
From what I have read, the 10.7 has a completely different design to the SMB versus the earlier 10.6. [URL].
I have a Cisco 1800 ISR router running IOS 12.4(22)T5.Clientless SSL VN is configured and working, and has three bookmarks.When logged into Clientless SSL VPN and displaying the portal page in IE-8, the bookmarks are visible and functioning as expected.When logged into Cleintless SSL VPN and displaying the portal page in FireFox-14 or Chrome-21, the bookmarks are not visible.The window for the bookmarks is displayed, but the content (file tree) is not.
I know about recomendation to update a system software! Here is my software version and rdp plug-in version: asa843-k8.bin, rdp-plugin.120424.I also tried to use previous version of rdp plug-ins, but connection through RDP still not work normally! 90 percent of the attempts to give a black screen.
I have asa 5505 configured with smart tunnel for mstsc.exe only. It work fine only if I use IP address of Terminal Server(192.168.1.1 for example) in Terminal Client(mstsc). But it does not not work if I try to use fqdn of Terminal Server (servername.domain.name for example). Is it possible to use mstsc.exe with smart tunnel with FQDN of Terminal Server?
Is It possible to hairpin clientless SSLVPN connections (ASA5510)? I'd like to create a portal that allows a user to log into the central clientless webpage and access RDP/VNC resources at remote sites connected via site-to-site VPN. Initial testing shows the user can access resources at the hub site, but not the spokes. I have the standard:
I currently have a problem with connecting to some CIFS shares on a EMC NAS. I have created some bookmarks for those shares to be used via the client less SSL VPN portal. I have also setup SSO which works properly for web-bookmarks and RDP stuff but not for the CIFS shares.
When I try to access those shares I'll always get a "authentication failed" error message. Afterwards a new log in-box is displayed. I have been able to log in to those shares by using the user-ID prefixed with the domain name [URL]. Log in fails when using only the user-ID or for example DOMAIN user-ID. I have also tried with a share on a different Server (windows2008 R2) which works without any problems.
I am trying to customize a web VPN portal on my 5510 but I get errors whenever I try to add a customization object. Running ADSM 6.1(5)51 on ASA 8.0(5). The error I get when I try to apply a newly created customization object is:
[ERROR] export webvpn customization DfltCustomization disk0:/tmpAsdmImportFile2090698426 export webvpn customization DfltCustomization disk0:/tmpAsdmImportFile2090698426 ^ % Invalid input detected at '^' marker. [ERROR] import webvpn customization test disk0:/tmpAsdmImportFile2090698426 % copying 'disk0:/tmpAsdmImportFile2090698426' to a temporary ramfs file failed [ERROR] delete /noconfirm disk0:/tmpAsdmImportFile2090698426 %Error deleting disk0:/tmpAsdmImportFile2090698426 (No such file or directory)
Tried revert webvpn all but I get error on that as well:
Result of the command: "revert webvpn all"
%ERROR: ifs_rm_dir_rec: unknown type of file `disk0:/csco_config/97/customization/86D3828A0A0EB0FFA3B55870AAA43E4F'
I've setup access via our ASA5510 portal which is working fine but I can't seem to connectto the ASA when there are two active connections. If there is only one, it's fine.
Problem - Unable to Connect More Than Three WEB VPN Users to PIX/ASAProblem :Only three WEB VPN clients can connect to ASA/PIX; the connection for the fourth client fails.
Solution :In most cases, this issue is related to a simultaneous login setting within the group policy.Use this illustration to configure the desired number of simultaneous logins. In this example, the desired value was 20.
ciscoasa(config)# group-policy Bryan attributes ciscoasa(config-group-policy)# vpn-simultaneous-logins 20Would this be the same thing?
If so how whould I check the existing setting in the GUI?
ASA 5520 to get it to authenticate VPN users against and Active Directory environment plus allow management access as well. I created a Dynamic Access Policy on the ASA stating that if you are a member of the Active Directory group "Managment" the continue. I chagned the DefaultAccessPolicy to "Terminate". So with that, VPN users cannot connect because they are not a member of that group, but the access to manage the ASA is allowed because of that policy.Is there a way through using Dynamic Access Policies that I can allow management access (SSH, ASDM, etc) by matching to a group membership and will allow normal users to VPN in successfully but not allow them access to managing the ASA?
I have an ASA5540 running AnyConnect premium (25 users). I know that I need the AnyConnect Mobile license in order to use an AnyConnect client on the IPADs/Iphones. My question is - can I do clientless SSL VPN? Do I need the AnyConnect Mobile license for this?
