Im testing ASA 9.0, that according to the release notes should support SharePoint 2010.But I still get the same problems I had with previous versions: the ribbon does not show up (just a loading spinner) and javascript popups do not show as well.
View 3 RepliesWhere to find the latest release notes of the 8.4.4 interim software. The release notes are not up to date ,URL
View 4 Replies View RelatedWe have a 5520 ASA running 8.4(2). We are trying to setup Clientless VPN access to our SharePoint 2010 environment. We have most of it working, however there are a few things that do not function right in SharePoint via the VPN but function fine internally. Are there any special things to configure specific to SharePoint? Some of the things that do not work include the SharePoint ribbon, up level function, opening of documents within SharePoint, etc.
View 3 Replies View RelatedI've got a question about the support of AP's in the latest 7.2.x code [URL] We have a couple of AP's that are not referenced in this matrix, does that mean that they are not supported or just that they're forgotten, because we have them running on 7.0.x code.
AIR-LAP1120B (nothing mentioned about those)
AIR-LAP1121G (maybe the fall under AIR-LAP1121 ?)
AIR-LAP1230A (only AIR-AP1230A is referenced.. typo ? or are the LWAPped once not supported ?)
Whether those mentioned are supported ?
if the sge2010 switch support Routing Information Protocol (RIP) and if so how do I enable it. I have a small wireless router that support it and would like client connected on it te bo visible from the wan side and that worked when I had another device doing the routing with RIP support the wireless router was picking up that information and the routing for the wireless client was working.
View 2 Replies View RelatedPB c3 easy notes wireless wont turn on wireless adaptar and drivers updated
View 2 Replies View RelatedCan I use Sharepoint print services with a macbook pro and a Vista 64 desktop?
View 3 Replies View RelatedI have setup load-balancing on an ACE 4710 for HTTP for Sharepoint 2010. The Server Admin says that the IIS server will recognize the right site by DNS name. Problem is I have no clue how to make sure the servers get the DNS name passed to them. They says this is for a multi-homing setup so that we can run multiple sites using the same VIP to the same Serverfarm. How do I do this? I keep getting the IIS splash page since the real server cannot determine the IIS site that I am supposed to access.
View 2 Replies View RelatedI present wish to develop a policy and template for QOS on our ASA 5520 release 8.0(2) we presently have wish to do server hosting in our network for other organization,which the they will be able to access their servers they have both public and private addresses. we do have our one servers also already in production all behind the ASA And therefore we wish to apply qos on the servers to be hosted and we wish to do this on the ASA. how to go about this to apply qos on the ASA?
View 3 Replies View RelatedI'm looking for documentation on the Enterprise mesh solution based on 7.0 MR1...In this release e.g 802.11n APs are supported and clean air for the client radio etc...The current Cisco Mesh Access Points, Design and Deployment Guide is based on the previous 7.0 release.Apart from the configuration guide I can't find any additional guides.
View 1 Replies View RelatedWhich is the last software release for WS-C2940-8TF-S?
I have:
IOS (tm) C2940 Software (C2940-I6Q4L2-M), Version 12.1(22)EA8a, RELEASE SOFTWARE (fc1)
I have a SF300-24P switch running version 1.1.2.0 firmware. I want to get to the latest release (1.2.9.44) - can I upgrade directly to the latest code or do I need to step through all the versions in between?
View 1 Replies View RelatedWhen will Cisco release the IOS release 15 for Catalyst 3560CG? We need it because of the critical voice feature (authentication event server dead action authorize voice) for 802.1x.
Actually only release 12.2(55)EX3 is available for the 3560CG-8PC-S models. The funny part is that for older 3560-12PC-S models there is release 15 already available.
i created the 10 V LAN in my Cisco 3750 switch.All other V LAN DHCP IP's (192.168.2.X - 192.168.10.X) will be release from the DHCP server except VLAN1 . In my 3750 switch i created DHCP pool(192.168.14.X).... and i assigned to VLAN10.... but one of the client is assigned to V LAN 2(192.168.2.X) configuration. but its getting IP from the Cisco DHCP instead of DHCP server.
View 2 Replies View RelatedCan add feature "release" and "renew" to wan dhcp client? Is it WOL not possible in RV220w? i tried forward broadcast magic packet from wan side, change broadcast IP and through VPN tunnel (PPTP & IPSEC)...got failed i change from draytek 2130n to rv220w, 2130n much better. except SSL VPN.
View 2 Replies View RelatedI've heard mixed things about the use of DHCP release messages. I've heard that some operating systems don't bother with them at all, which makes sense because many users disconnect the network media without shutting down the workstation. Which operating systems actually send out release messages as part of their shutdown sequence?
View 5 Replies View RelatedI have a linksys EA 2700 with the latest smart wifi firmware. However, the "Release and renew" of the IPv4 internet ip is greyed out. Only IPv6 is enabled.
View 1 Replies View RelatedI've had my WRT110 for about 3 years or so, and it has worked fine for a long time. Today my computers were connecting to the router, but weren't getting internet access so I did the following:
checked lights on router and modem, they all indicated everything was working and normal Reset Modem,Reset Router,Still nothing. Called Comcast, they said everything was working fine from their end.Plugged my laptop into the ethernet connection on router.Plugged laptop directly into modem and it works fine.I saw the link on here to setup the router, and I have 0s on the internet ip, like it suggests at the end. When I click on the "release" and "renew" buttons nothing changes.
How do I set my network key in Microsoft Word 2010
View 1 Replies View RelatedWe have acquired a cisco sge 2010 to replace our distribution switch. I set up the 802.1X network. Everything works great except I can not find how to enable 802.1x with 'Wake on LAN' on this kind of switch.
On catalyst I saw that it was sufficient to activate this control "authentication control-direction {both | in}" Except that it seems not to exist on this switch. Is there another way to enable 802.1x on WoL without using this command?
Or how to allow the magic packet (WoL) on a tagged port by unauthorized 802.1x?
I am working with a client to implement QoS for their Lync environment. Lync 2010 has this feature to mark dscp values based on packets tagged with logical ports. As an example, packets on port 49000 til 49999 will be marked to dscp 46(ef). On Cisco 2811 router, I am basically honouring the markings by the application and placing bandwidth priority on them and sending it out to the WAN.
The behaviour that I notice is that when port based packets are marked with a certain dscp value on the application, the router policy map doesn't pick up any packet increment for that dscp. But when all packets without port assigning to it are marked with certain dscp value, I can see increment on the router policy map for that dscp match. Why is this so???
The client wants the Lync to mark the packets with dscp value and the router is suppose to honour the marking, schedule the priority and send it out. [code]
i am working on a project with 2 security ASA's 5520 with Microsoft ISA/TMG-2010 Server having 2 DSL's my question is regarding the designing issue where should i connect the 2 DSL's using ISA/TMG-2010..
View 1 Replies View RelatedWe have a pair of ACE 4710 devices in front of a TMG 2010 array (3 members) and are having some issues. We have a nat pool on the ACE and need to be able to use integrated authentication in TMG since we are filtering URLs based on user ID. For example some users might have access to certain websites that other users do not have access to. TMG does all this fine when we send traffic directly to one of the TMG servers and it can successfully authenticate the user using the active directory username that was passed through. The problem occurs when we send traffic through the ACE first, upon which time the user credentials are no longer appearing to TMG and the user is getting prompted for a username/password whenever they try to access a website. Even when they do enter their username and password (which they shouldn't have to do) the request is still denied by TMG since it is coming from "anonymous" instead of their actual username.
Another problem we seem to be having which isn't as important right now is the fact that since we are using a nat pool on the ACE, every web request to the TMG servers comes from one of the NAT addresses, rather than the original client IP. Is there any way to get around this and have the actual client IP show up instead?
Currently i am having a scenario where i have setup RV042 and which is connected to Microsoft Forefront 2010. PPTP works fine only on rv042 subnet but i am not able to access the "internal" network of TMG.
RV042 (172.16.1.1) ---> TMG [external] (172.16.1.2) ---> TMG [internal] (192.168.1.1)
Is there any way through static route to access the TMG internal network through RV042 pptp server ?
Lost pin number for Microsoft 2010?
View 1 Replies View RelatedI downloaded the ISO for SSE 2010, and the damned thing is too big to burn to a DVD5. I doubt seriously MS expects people to have Dual-Layer discs handy.Is this intended not to be burned, but installed from the desktop instead? I can open the ISO just fine with WinZip.
View 5 Replies View RelatedI'm looking to do a basic QOS configuration which states that VOIP traffic has priority over anything else.
View 3 Replies View RelatedWe have the following setup on our Cisco ASA version 8.6.1 One to one NAT rule from outside to our Exchange 2010 cluster IP address (DAG group). This is working fine for clients on the internet accessing their emails via Exchange using their phones. The ASA has the MAC address of the active node from the cluster but when the cluster failover it cache the IP address and are not updating the new MAC when the cluster failover. So users from the outside are unable to connect to the new node from outside the ASA as the MAC address from the passive node is in the MAC table. The MAC address on all the switches update within 2 seconds on the internal network and users don't notice any outage.
View 4 Replies View RelatedWe have a catalyst 2950 switch running:
IOS (tm) C2950 Software (C2950-I6K2L2Q4-M), Version 12.1(22)EA6, RELEASE SOFTWARE (fc1)
This release doesnt have the snmp-server enable traps errdisable command.
Where to look on the cisco site for the next available release for me that would have this command in place?
I have got a TMG 2010 and i want to use Skype through it. if HTTPS inspection is enabled skype doesn't work, if it is disabled skype is working.What can i do for using Skype behind a TMG with httsp inspection so i want to use 8080 port only.I have excluded the 1 PC from HTTPS inspection or the destination URLs from HTTPS inspection.
View 1 Replies View RelatedI think that our users are at the largest capacity for attachments, twice in the past week one of our users did not received important emails because of the attachment size limit. The problem is that the sender thinks we got it b/c there is no bounce back and we have no record of the email being sent. my question is how do i increase the attatchment size for incoming emails?
View 4 Replies View RelatedNo Network connection after Office 2010 install, I have limmited or no connectivity. I've removed and reloaded drivers, reset router, performed a netsh flush, tried to manually connect, kicked it, threw something at the wall and still no luck.
View 6 Replies View RelatedI reinstalled my windows7 again, because my laptop was jamming so much. But i cant connect to internet via wireless. I dont have any other options to connect my computer to internet other than using wi fi. I think it says i didnt install the wifi driver. i tried something, but it didnt work. btw i have inspiron 15r bought in the end of 2010
View 16 Replies View Related