Cisco :: VRRP Authentication Failure
Jan 1, 2013I have a following question. I configured different authentication passwords in Master and slave VRRP setup.
View 2 Replies
ADVERTISEMENT
Cisco Application :: ANM 5.2 Authentication Failure
Apr 15, 2013I'm using the Cisco ANM 5.2 version and I'm trying to import the configurations from ACE modules of Cisco switches. The first step is to import the configuration from Cisco switch and the second one is to import the ACE module in the ANM software. I'm getting an authentication problem to import the configuration from Cisco switch and of course I cannot import the ACE as well. The switches and the ACE are using AAA authentication and I have created a specific username to authenticate and import the configurations in the ANM. If I remove the AAA configurations from the switches and ACE modules it works fine.
Is there some problem with the AAA configurations in the switches or ACE module?
Cisco :: SSH Authentication Failure CiscoWorks LMS 4.0
Oct 24, 2012I am trying to get CiscoWorks LMS 4.0 to connect to my routers in order to back up configurations, but I am getting SSH authentication failures reported in the router logs (and archiving fails).
The credentials LMS is using is a username and password with priviledge 15: the account is established in TACACS+. I can log into the devices directly with this user account.However, I cannot TFTP from the routers to the LMS either (I get a permission denied message in the router).
LMS did manage to fetch some configs, but 90% of my devices are having this issue.
Cisco Wireless :: AAA Authentication Failure On WLC 4402?
Jun 13, 2012Error: AAA Authentication Failure for UserName:radiususername User Type: WLAN USER
I am using a window radius server. I have added my WLC 4402 as a radius client on my radius server.
I followed the instructions on the MS link : [URL]
I want to use my windows raduis authentication for WLC management login and Web-Auth for guest WLAN user login.
Cisco VPN :: 5510 Anyconnect SSL VPN Authentication Failure
Dec 26, 2012I have configured an Asa 5510 as SSL vpn gataway ver 8.2(4) Anyconnect Essential. The clients are authenticated via Radius and OTP password.All work well since yesterday. When I have did same configuration changes. My objective was has that the clients accept the self signed certificate issued by the Asa whitout give the warning about the private cert.
So I have try to generaste a new certificate with FQDN equal to myasa.mydomain.com and also a CN=myasa
Then I have change the profile XML file of my anyconnect in this way: [code]
Cisco Wireless :: 5508 - AAA Authentication Failure
Aug 3, 2011I've set up several local network users (Security > Local Net Users) on the WLC (5508 running 7.0.98.0). Whenever I try to connect with one of these user accounts (I'm testing this out for now), the attempt is unsuccessful and I see an "AAA Authentication Failure for UserName: xxxxxxx User Type: WLAN USER" in the Trap Log. I thought that after trying to authenticate through a RADIUS server, the local user database would be polled and then a user account in that database would be able to authenticate.
View 1 Replies View RelatedAAA/Identity/Nac :: ACS 5.2 AD Authentication Restriction Failure?
Aug 24, 2011I've my ACS linked with AD to give administration access to few network devices and I've created an access policy to link my AD groups with those network devices and command sets.
Unfortunately I found I can use any user from my AD to login to my devices. Only LOGIN, the authorization definition is restricting the command set for those users.
How can I restrict the LOGIN to an specific AD group?
Cisco Routers :: PEAP Authentication Failure With RV120W
Jul 31, 2012I have a Cisco Small bussiness RV120w and I setup the radius server , WPA2 Enterprise with a windows 2008 NPS radius server . The big problem is that the authentication fails .This is the error that I see in event viewer / server roles / Network policy and access services: reason-code 49 "The connection attempt did not match any connection request policy".The radius key is matching between the server and the client . The radius server is reachable and I don't find any routing issues .Does anybody tested this router with this type of wireless security?
View 3 Replies View RelatedCisco AAA/Identity/Nac :: ACS 4.2 / 2851 / There Is Authentication Failure With Error No 254
Nov 22, 2011we have ACS 4.2 and 2851 router with IOS 15.0(1)M4. There is authentication failure with error no 254. Is there any compatibilty issue with 15.0(1)M4 IOS
View 1 Replies View RelatedCisco Wireless :: 5508 WLC Excessive Client Authentication Association Failure
Jan 29, 2013I have been noticing in my trap logs that there are an excessive amount of Client Association/Authentication Failures. I cannot figure out why. I have a Cisco 5508 WLC with 81 AP's (1131ag, 1142abgn, 1262N) models. The wireless devices are on a Windows Domain and use 802.1x EAP authentication, authenticating the user and computer info with a RADIUS Server. I look at the logs and all it can tell me is Reason:Unspecified ReasonCode:1. I read that the Reason Code is due to "Client associated but no longer authorized" but to be honest I am not sure what that means.
View 9 Replies View RelatedCisco :: ACS 4.2.1 - Alteon 3408 L4 Switch Authentication Failure By RADIUS Protocol?
Jul 25, 2012I have a question about ACS RADIUS authentication with Alteon 3408 L4 Switch.
I configured a ACS 4.2.1(build 15 patch 4) software for windows on Windows Server 2008 Server STD.TACACS authentication with CISCO product was successfully passed.but RADIUS (IETF) authentication with NORTEL 3408 Switch was failed. ACS Authentication Failure Code was a " ACS password invalid "
I read the post that RADIUS VSA is needed in my environment.but i can not search any sample Nortel VSA dictionary configuration. Need Notel specific VSA configuration.
Cisco AAA/Identity/Nac :: 13017 Way To Configure Email Notification For Specific Authentication Failure
May 14, 2011Is there a way to configure an email notification for a specific authentication failure? Specifically, I'd like to see if I can have an email notifcation sent to me when failure reason is "13017 Received TACACS+ packet from unknown Network Device or AAA Client".
View 1 Replies View RelatedLinksys Wireless Router :: E4200v2 - Bizarre WPA2 Authentication Failure
May 3, 2012Just installed 2 E4200v2's for a customer today. Was very optimistic because they worked great in my lab, both for my Win7 laptop a MacBook. And after installing 1 on-site and testing w/ my laptop, it worked fine.BUT problems arose when I installed both at the same time (I don't think I ever did this in the lab) and then I tested some computers. Every computer that I tested (except mine of course), cannot authenticate correctly using the WPA2 password.
For the Mac's they get the error "The wi-fi network... requires a WPA2 password" then after entering the *correct* pswd, it says "Invalid password". They're a Mac shop, but I did try one other Win laptop and that also had a problem, and the error was something like "security mismatch" although I was rushed and didn't write it down.
Cisco VPN :: Does 2911 Support The VRRP
Jan 30, 2013Does Cisco 2911 support VRRP?I can’t find in datasheet anything about it.
View 2 Replies View RelatedCisco VPN :: 2800 - Remote Access To VRRP VIP?
Feb 14, 2011One of our customers had 2 x 2800 series routers that they needed to reconfigure to support new services, The existing public subnet has 2 free ip addresses to use for the routers, unfortunetely even though the ISP can reconfigure this to create more addresses the customer cannot have any downtime (there are other routers in this subnet that are live) and therefore i had my hand forced into using VRRP as opposed to HSRP (3 addresses).
I used VRRP to share the master address as the VIP, so one address on the master, one on the backup, using the master address as the VIP.
This all works fine, outbound and inbound traffic failover as expected and preemption works just fine.
My problem is, he asked me to configure a remote access VPN. So i have configured the VPN to connect to the VRRP VIP. When the master is active, the VPN connects, traffic passes, all fine. When the master is switched off the VPN traffic hits the backup, as its now assumed the VIP, and completes phase 1, xauth works, but phase 2 will not come up and the client displayed "not connected".
So doing some debugs, the phase 2 policies are accepted, but i get the message
*Mar 1 01:36:21.451: IPSEC(validate_transform_proposal): invalid local address x.x.x.164
where x.x.x.164 is the VRRP VIP address, the physical address which has the crypto map applied is .165
So here lies the problem, the client is connecting to .164, the crypto map is applied to the interface the is configured with .165. Hence the "invalid local address"
I have found some documentation online that suggests that VPN redundancy is possible with HSRP, but not on the 2800 series router. I cant use HSRP as i have only 2 addresses, and i cant use that feature as my routers dont support it.
Cisco :: Vrrp Providing Redundancy On The Trunks From Switch
Apr 18, 2013R11 is acting as host for testing purposes (pinging the DG's, and the ISP interfaces -> which are the lo0 address on the routers.I also have another question: How would I go about providing redundancy on the trunks from the Switch to the router?
View 2 Replies View RelatedCisco WAN :: 1811 How Will OSPF And VRRP Factor-in To Such A Setup
Sep 29, 2012I currently have a working metro ethernet connection between our main office and a branch office. I am tasked with building a redundant route for this site, in case the metro-E line goes down. We are purchasing two cable internet lines at each sight and I plan on buying two Cisco routers to do the VPN tunnel via the new cable Internet connection. The metro ethernet connection currently has two HP 3500s on each atm.2 questions:
-How will OSPF and VRRP factor-in to such a setup?
-What Cisco routers are recommended that can utilize this protocol?
The HP 3500s can do either OSPF or VRRP.I have been purchasing and setting up refurbed Cisco 1811 routers for other VPN tunnels and they work great.
Cisco Switching/Routing :: ME-3600X VRRP Configuration?
Nov 22, 2011I have found the HSRP configuration example in Cisco Metro Ethernet Switch ME-3600x/ME-3800x but unable to find the VRRP configuration exmaple in Configuration guide as well in Command Reference Guide.
I am using the IOS version ME-3600: S360XVK9T-12252EY and ME-3400: S340XBT-12253SE
command reference guide: [URL]
configuration guide: [URL]
Kindly confirm either these switches support vrrp commands or not? If yes, kindly share configuration example.
Cisco Switching/Routing :: Will Vrrp Object Tracking Work On 1721 Router
Feb 20, 2013I am using a bunch of Cisco 1721 routers for my T1 lines. We recently purchased Digi cell modems as a backup for the T1. On configuring vrrp to work on both devices I discovered that IOS 12.3(6c) does not support the "vrrp track" feature. After reviewing the Cisco Feature Navigator I could not see an IOS that will support the vrrp object tracking. Is that correct? The routers have T1 WIC's installed. If it does work what is the latest IOS that will work on this end of life product?
View 1 Replies View RelatedCisco Switching/Routing :: 3825 - Use HSRP Or VRRP If Not Two Valid / Unique Wan IPs To Assign Routers
Apr 24, 2008Our ISP hands us an ethernet link. ISP router has one address of (for argument sake) 1.1.1.0/30 net, - let's say they have 1.1.1.1 we have the other usable address of 1.1.1.2/30 assigned to our 3825 router. Is it possible to use hsrp or vrrp if there is not two valid/unique "wan" IPs to assign to our routers? For example, if we had a pair of 3825 routers? are we stuck with basically a manual failover or requesting our isp to provide a larger address wan block?
View 2 Replies View RelatedCisco Switching/Routing :: 7609 For Switching / Based On LAN (VRRP / HSRP) Feature
Oct 18, 2011I am facing an isssues with 7609 for LAN switching , based on LAN (VRRP/HSRP) feature.Actually we are having ES+ cards (on 7609) and we are using multiple groups(say 350 vrrp groups) running on the router . the routers are connected as router 1>>> mux(which is working as switches)>>> router2
my questing are
1. does their will be "multicast packets" (for VRRP/HSRP group) "from backup router to Master router", when in stable state( ie when Master and backup are already chosen) , or the packet from backup to master should be unicast.I know for sure, the packet from master to back is multicast packets denstination to Multicast IP packet and To MAC address.I am not sure but I think from backup to master it should be multicast
2. what is frequency of these packets( from backup to master)
3. As i have multiper group on a single interface ( we are using q-in-q), when the connectivity from router's is broken, then does all the groups will muticast their active roll in the lan sengment "at once" or it will be in a groups say 100 groups at once, and after few ms few 100's and sone ( as is on OSPF or RIP)
we are in between troubleshooting I hope we get the ans( Actul problem we are seeing in the router's that we have 2 ports on active routers and 2 ports on standby router , but we are not seeing muticast on 1 port on standby router where as all other 3 ports are seeing multicast packets) [code]
Cisco :: CSM 4.1 / ACS 5.1 Non-ACS AAA Failure
Jan 10, 2012I know that CW Common Services 3.3 does not work with pre-defined roles on ACS AAA. So I followed these forums and enabled non-ACS AAA and selected TACACS+. I have a single rule that is matching in my ACS (after looking at the audit trail):
Authentication Details
Status:
Passed
[Code]....
As you may have noticed even though it is matching an access service that allows Priv15. That doesn't seem to be passing through as you can see on top I am only receiving Priv 1. What can I do to properly pass through the access service profile?
Cisco :: LMS 3.0 - Authorization Failure Log
Jul 16, 2011In our company we are using Ciscoworks LMS3.0.( DFM 3.0.1, RME 4.1.1.) In DFM, every day at 8:00 PM we receive alarm authorization failure on Core switch ( source is cisco works server IP).
View 6 Replies View RelatedRandom DNS Look-up Failure
Jan 27, 2013Whenever I try to open multiple sites, I will get a DNS lookup failure. Whenever I torrent something, websites give me a DNS lookup failure. Watch Youtube and open anoter site, DNS lookup failure. It seems that when I try to use too much internet I crash something... which doesn't make any sense because this problem has only come up recently. The only thing that I can think of is that I was messing around with the DNS to be able to connect to the American Netflix (I'm Canadian). I was using a site called "ZenOK" I believe, which gives you a server to connect to, and then a week later tells you it's no longer free (which they didn't mention in the signup)... so I removed the DNS number in my internet protocols, but I still get American Netflix.
View 14 Replies View RelatedCisco :: LMS 4.0.1 - Failure With PSIRT-EoX System Job
Jul 12, 2011we cant create EoX and PSIRT reports For Job-Log please see attached 1007.1.log.Patch lms40x-win-CSCto46927-0 has been installed already.CCO-Credentials + Proxy-settings in LMS must be oK, because we are able to auto download device packages for instance.
View 4 Replies View RelatedCisco :: LMS 3.01 - Inventory Failure On Various Devices
Nov 23, 2011We have several unknown devices within our inventory. When running an inventory report the message I get back is "No Credentials available".
For inventory checks is it just SNMP that is used or is it the standard credentials that are needed ?
I am planning to edit the credentials for the single device manually to see if this makes a difference. Our integration is with ACS and we have a machine account with admin priveleges.
Device Verification for the device states "Device Not reachable" for SNMP and SSH. There are no drops on any of our firewalls but snmpwalk does work from the command prompt from the LMS server.
Are there any further checks I can make for these 2 messages:
* "No Credentials available". * "Device Not reachable"
Cisco :: RV016 DNS Lookup Failure
Apr 19, 2012I manage a small business with 10 computers running off my network. They are all connected to the internet through a RV016. We recently created a new website and purchased a new domain through In Motion Hosting. I have a randomly reoccuring issue, usually in the morning, that seems to resolve itself after a couple hours on it's own. I have dealt with tech support from In Motion Hosting and my ISP who have both come to the determination that the problem lies within my gateway.
When I attempt to log on to my companies website [URL] my browser is unable to locate the webpage. Also, if I try to access the website for In Motion Hosting [URL] or to access our webmail [URL]I am unable to do so because the DNS lookup failed. I can view any other web page on the internet without a problem. I can not ping or tracert either website successfully, however when I called In Motion Hosting and got the IP addresses for the two I was able to ping and tracert them without a problem.
As I said the problem happens randomly and seems to resolve itself within 2-8 hours. However we are unable to access our email during these "blackouts" which is becoming a huge problem.
Is there a setting within the RV016 that might be causing this to happen?
Cisco VPN :: Driver Failure For 440 VPN On Windows 8
Jan 15, 2013I have Samsung Tablet Windows 8 32-bit I installed VPN Client Version 5.0.07.0410 successfully installed, but I cant connect through the profile always got Driver failure 440.
View 3 Replies View RelatedCisco WAN :: Tracking ISP Failure In ASA 5510?
Nov 14, 2011Some times the ISP side interface remains up with a failure of internet. At those situation how we can efficiently track the ISP failure from asa 5510
View 2 Replies View RelatedCisco :: LMS 4.0.1 Inventory Collection Failure
Feb 20, 2012After I upgrading all device packages, inventory collection failure to complete. All devices stuck on pending state and at the end of the job all devices are under not attempted and job result description ses " Timed out. Make shure that ICServer is running". I made sure that ICServer is running.
LMS runs on windows 2008 R2 server
Cisco WAN :: 3750 IOS Upgrade Failure
Feb 20, 2011I'm trying to upgrade a 3750-24TS from c3750-ipservices-mz.122-25.SEE2 to a more recent image. On the first pass, I got
Error: There is insufficient space in flash: to install the requiredError: image. Clean up some old images, and try again.
So I used the delete /recursive flash:image-dir-name to clean out the old files, but I'm still getting the same message after doing this. What's the problem? Now I have a switch with no IOS and need to at least get something on there.
Switch#sh verCisco IOS Software, C3750 Software (C3750-IPSERVICES-M), Version 12.2(25)SEE2, RELEASE SOFTWARE (fc1)Copyright (c) 1986-2006 by Cisco Systems, Inc.Compiled Fri 28-Jul-06 08:46 by yenanhImage text-base: 0x00003000, data-base: 0x010CE290ROM: Bootstrap program is C3750 boot loaderBOOTLDR: C3750 Boot Loader (C3750-HBOOT-M) Version 12.2(25r)SEC, RELEASE SOFTWARE (fc4)Switch uptime is 1 hour,(code)
Cisco Wireless :: WAP 321 Causes Network Failure?
Mar 25, 2013I recently bought a Cisco WAP 321 for my company, but when i connect it to the network, the switch on which I connect crashes, and I lose all connectivity to the network, (internet also). i have to unplug the WAP321 and wait for a few minutes to be able to use the network again.
I'm currently using a small 8 port switch, There are usually 3 or 4 users connected on it. When I try connecting the WAP321 on another switch, only connected to 1 computer, it seems to be working : I can access the configuration page, and make some modifications.
Cisco AAA/Identity/Nac :: 802.1x Credentials Failure With ACS 5.2
Jun 20, 2011I recently tried to deploy an ACS appliance with version 5.2 installed on it for a customer.
After setting up the WLC to use the ACS as a radius server, and successfully testing connection from the ACS to the AD, I get an error message " 12321 PEAP failed SSL/TLS handshake because the client rejected the ACS local-certificate" anytime a client tries to connect to the network.
This is surprising because I had already generated a certficate for the ACS from a CA and binded the CA signed certificate with the ACS, I also specified the CA in the client machine's wireless properties and checked the "validate certificate" button.
When I tried to connect using the internal identity store, the client was successfully authenticated without any certificate issues.