Cisco WAN :: SRP-547W Allow Certain Websites To Be Accessed

Feb 18, 2012

I'm slightly concerned about my Cisco SRP-547W... there are times when it will cease to allow certain websites to be accessed and for a SONOS system to access Napster/Spotify. When i look in the administration part, the CPU usage shows 100%. I then have to restart the router, where it will settle back down to between 20% and 40% CPU load.Whats odd is it's not something that happens once every hour, it can be fine for days and then suddely go.

View 1 Replies


Cisco Routers :: SRP 547W - Firmware Update?

Oct 2, 2012

We just purchased a new SRP 547W. When logged in with either the default admin or the cisco account there is nowhere to updare the firmware, but the manual says there is such a screen. The manual also mentions a "user list" under the "Administration" tab, but that is nowhere to be found either!
Model: SRP547W, ADSL2+ AnnexA, 802.11n FCC, 4FXS/1FXO Version ID: V02 Hardware Version: 3.1.0 Boot Version: 1.1.19 (Aug 24 2010 - 20:50:42) Firmware Version: 1.02.00 (023) Jan  6 2011 ADSL Firmware Version:0.60.0Recovery Firmware: 1.02.00 (023) Setup Wizard Version: 20101106.00

View 3 Replies View Related

One Computer On Network Can't Be Accessed By The Others

Jul 31, 2011

I've got 3 identical PC's that were bought and configured at the same time, all running Windows 7 off a Netgear router. Though all 3 machines can successfully ping each other, one machine can't be accessed by the other two through windows explorer meaning it can't participate in LAN games or share files with the other 2 machines.

I also seem unable to register my copy of Starcraft II because it doesn't recognise any return data from the Starcraft servers, though it works fine on another machine (not sure if this is related). I've disabled the firewall on the unaccessible machine and believe file sharing is activated but it hasn't worked.

View 3 Replies View Related

Cisco Firewall :: ASA5510 Can't Be Accessed For Management

Mar 13, 2013

I am trying to get an ASA5510 working in transparent mode, multi-context.  I am on revision 8.2.5, so there are no bridge groups (those are enabled in 8.4). I first set it to transparent mode, then set it to multi-context mode.  I am doing trunking through the Ethernet0/0 to Ethernet0/1, and have two vlans on subinterfaces of each interface.  These interfaces are in the 2nd and 3rd contexts, and all trunking between vlans is working correctly in transparent mode.
But I can't telnet or ssh to the ASA itself.
I have an IP address on the inside vlan interface in

View 4 Replies View Related

Cisco WAN :: 3825 Cannot Ping DNS And Neither Internet Can Be Accessed

Jun 27, 2012

I have cisco 3825 router with two interface one with public ip and the other with private ip and the DNS is, I configured NAT overload on it to access internet I can ping public ip nad default gateway but cannot ping dns and neither internet can be accesed. following are the configurations. [code]

View 2 Replies View Related

Home Network :: Certain Sites Can Only Be Accessed When Using Fiddler?

Apr 16, 2012

I have recently installed a new router (DLink Dir-615) and it seems that certain sites will not render for me. They simply show up as blank pages, or they will attempt to load, flash a few times and end in a the site cannot be reached. However, if I am running Fiddler, all of the sites work. The issue also occurs with various components on certain sites, i.e., video. The videos either do not play or will continuously skip to the next clip when Fiddler is not running.

I am completely baffled as to why this is happening and is there some setting on my new router that I need to enable?

View 1 Replies View Related

D-Link DIR-655 :: Need To Block Certain IP Address To Be Accessed By All Computers

Dec 3, 2011

Bought DIR-655 from Amazon. Rev. B. Come with 2.00NA firmware. Updated to latest one, and there are a lot of problems, to most of them, I was not able find any solution. Here they start:

1. WIFI SPEED PROBLEMS.No matter what speed, parameters, channel, mode, etc I select, router keeps working on 20mhz channel width. So I never get speeds above 65 mbit. In absolutely same conditions, my DIR-300 B1 (with DD-WRT firmware) gives me stable 150mbit. SO I KINDLY ASK, MAYBE THERE IS A WAY TO FORCE "40 MHZ ONLY" OPTION?

2. PASSWORD PROBLEMS.Router came with no admin password, I enter new password, hit "update" it says - wait 20 sec, after that, login page is displayed, but, new pasword does not works! since it asks again for empty password!

3. FILTERING PROBLEMS.I need to block certain IP address to be accesed by all my computers. Say this is . So I added inbound filter rule, to block access to that IP. It does not works - IP is still accesible.

4. MORE FILTERING PROBLEMS.Since above mentioned method does not works, I have to use "ACCESS CONTROL" feature. It does works, but it causes another problem, with access control enabled, all webpages with form submit stop to work. For example, if I'll have that feature enabled, when I press "post" on this webpage, it instantly will go to "this page cannot be displayed".

I bought this router solely for one purpose - I was happy with speed of my DIR-300, but I needed gigabit for my computers. So I thought, instead of buying separate switch, I'd better buy a router with gigabit. I was suggested to get TP-LINK 1043, since it's quite popular, alternate firmwares available and so on, but I refused to buy it, since I thought that some chinese company does not worth my attention. So I bought this D-Link (for almost 2x price of TP-Link) and having huge problems as you can see.

View 9 Replies View Related

Linksys Wireless Router :: WRT54GC V2.0 Cannot Be Accessed?

Jul 13, 2009

I have a WRT54GC v2.0, that was working perfectly till yesterday.I cannot access the router no more, either thru cable nor wireless, all lights are flashing.I thought it would be the power source but i have measured it with my fluke multimeter and there is 3.5v, it is probably working well.

View 9 Replies View Related

D-Link DCS-930L :: Does Data Only Go Over WAN Connection When Camera Accessed?

Jan 8, 2012

Or, does the data only go over the WAN connection when the camera is accessed via myDlink?  I ask because I have this camera installed in my mountain home and the WAN connection is a 5GB/month Verizon USB modem.  It seems to be chewing up a LOT of data.

View 2 Replies View Related

TP-Link 300Mbps Wireless :: WR841N Configuration Page Could Not Be Accessed

Mar 26, 2013

Region : Others
Model : TL-WR841N
Hardware Version : V7.2
Firmware Version : TL-WR841N_v7_120201

I recently encountered a problem with my router. It's configuration page is not accessible quickly. When I opened it ( by typing in my browser) it took ages to open and even when it did, the page lacked a lot of features i.e., it did not load properly. Then on a suggestion by a friend, I downloaded the latest correct version (I have an IQ above 60) for my router but the problem persisted. And it is only on my PC. When I access it from some other PC, it opens as it should. My router is only 6 months old.

View 4 Replies View Related

Dell :: Vostro 1000 - Wireless Network Driver Could Not Be Accessed

Jul 8, 2013

I have problem of dell wireless my notebook is VOSTRO 1000 i installed all wireless drivers and still have the problem. Wireless icon is disappear and see error message that tells like this:


View 3 Replies View Related

Cisco Switching/Routing :: Nexus 5000 Switch To Be Accessed And Managed Inband

Nov 28, 2011

we have e requirement for a Nexus 5000 switch to be accessed and managed inband, ie the Management interface can't be connected to the rest of our networks management VLAN because the switch is remote and only connected via fibre. We have enabled the interface VLAN feature and configured an interface VLAN but can't seem to PING the IP address configured on it ?

View 10 Replies View Related

Linksys Wireless Router :: WRT160N Can't Be Accessed By Other Computers Unless Change SSID Name

Oct 15, 2011

Been using the WRT160N for a while now and it works great except for one issue. Every few weeks the wireless can't be accessed by the other computers unless I change the SSID name. It was frustrating to figure out, but simply changing the name makes it accessible again.

View 1 Replies View Related

Linksys Wireless Router :: WRT610N Network Drive Can't Be Accessed By Any Computer

Feb 27, 2013

I have a WRT610N v2 with current firmware.  The hard drive is a Western Digital Elements formatted to NTFS and already has music and photos so that other computers in the house can view them. This setup was done awhile back, maybe even a year ago.
Anyway, I can map the network drive and see everything there, but then after awhile (minutes - maybe 10) of idle time, the network drive can't be accessed by any computer, either as the mapped drive (W or by clicking the WRT610N in the network tree. It's like it goes to sleep and can't be awakened by activity.
I have searched the forums here and at WD but haven't found a solution or even this exact problem.  I did find a utility on the WD site that is supposed to fix/eliminate the short idle time, but it didn't seem to work.

View 4 Replies View Related

Linksys Wireless Router :: WRT350N Requires A Password From Outside LAN When Accessed As Ftp Drive

Aug 2, 2011

My storage link drive is accessible from my lan requireing a userid and password, but it can be accessed from outside my lan through ftp without userid and password.  how do I change it so it requires a password from outside my lan when accessed as an ftp drive? I have the WRT350N

View 1 Replies View Related

Linksys Wireless Router :: Firmware Upgrade E4200 Can No Longer Be Accessed

Oct 18, 2012

automatic firmware upgrade my E4200 can no longer be accessed.

View 6 Replies View Related

Linksys Wireless Router :: Wrt54gs - Shared Hardwired Printer Dropped When Accessed By Wifi Device?

Jul 5, 2011

Win7, wrt54gs,
It works sometimes.  I imagine it has a noise problem since sharing files works, internet works.  I cannot remember how to change channels on this router to save my life, though.  What is special about sharing a printer?

View 1 Replies View Related

Cannot Access Some Websites?

Feb 1, 2011

I am trying to access some websites and unable to do so

View 2 Replies View Related

Why Won't Pc Access Any Websites

Apr 13, 2011

When clicking the Internet Explorer icon it won't open ANY webpage. My Internet connection works perfectly. My other computers are fine.

View 1 Replies View Related

Websites Work On And Off

Jul 22, 2011

Since thunder caused a brief shortage a week ago, I have been getting this error a lot:So when and how does this happen? Some of the time, all sites work perfectly. The rest of the time, about half the sites I try to visit yield this error. I might be browsing Website X for a while, and spontaneously, I start getting this blank screen error message for every page on that site. Unreachable sites usually start working within ~10 minutes though. Some sites always work (e.g. Reddit and Google, but not always the images in Google Images).If I try this on my laptop, using the same network cable, everything works perfectly. My computer is the only one in the house that has this error, for some reason.I have tried "ipconfig /flushdns", "ipconfig /renew", Google's DNS and OpenDNS, the "repair connection" thingie in Windows XP, restarting the server (well, my dad has), opening sites in Internet Explorer (I usually use Firefox) and unplugging/replugging my router.I haven't had any success although I have twice been tricked into believing that I've solved the problem, since all sites have randomly decided to work for a few minutes (non-reproducable of course).

View 7 Replies View Related

Cannot Connect To Some Websites?

Mar 16, 2012

I have been trying to load Free Cloud Storage - MediaFire and the page does not load on any browser.I ran a tracert and got this.[CODE]

View 1 Replies View Related

Can't Browse To Some Websites

Nov 12, 2011

Well actually now i have another problem. I easily works to like search on google. for example wikipedia works too. But from the moment i want to go to facebook or something similar, it doesn't work?

View 1 Replies View Related

Can't Connect To Some Websites - URL Is Up

Sep 15, 2011

I have several websites i cant connect to but i will use consumerist as a example.I can not connect to it even though url... Is Up -> Check if your website is up or down?Says it's up. Therefore something is wrong. It is a new HP DV6 running MS sec essentials and MBAM (unactivated). I just set up openDNS to see if it would change and still nothing. I have tried multiple networks and they don't work either.

View 9 Replies View Related

Can't Load Some Websites

Oct 19, 2012

I forgot to mention that all of my electronics with a browser cant load these websites, so it cant just be my laptop. I ran scans, restarted, flushed the dns and even tried changing it to a public dns (but it wont load though, so i didnt). Contacted my ISP, but they kept telling me that my internet connection is just fine. Tried changing my wifi router from a newer one that i borrowed, didn't change anything. And still nothing, it's been a week now, it's just frustrating when you have your break early with no one around + no internet D

View 1 Replies View Related

Some Websites Keep Timing Out

Sep 11, 2011

Since yesterday I just get the timeout message on a few websites. "The connection has timed out. The server at is taking too long to respond." It's not just my browser or my computer. The other two computers on the network can't access them either.

View 17 Replies View Related

Can't Access Certain Websites

May 11, 2011


I'm in Indore (India), whereas my friend from Mumbai can access them both.Also my ISP is Airtel.

View 3 Replies View Related

Unable To Get To Different Websites

Mar 12, 2013

I am unable to get to different websites, I have cleaned the dns, cache, deactivated and reactivated the security programs, firewalls and everything that I can think of

View 2 Replies View Related

Some Websites Timing Out?

May 20, 2012

Some websites, such as Amazon and Verizon's forum suddenly started timing out. This occurs on chrome, IE, and firefox. My xbox says it is connected to the modem but that it is not connected to the internet. My kindle fire cannot connect, but my android phone could load some websites, but now it can't load any. My mac, my laptop with windows XP, and my desktop with windows 7 are having the same problem. I did an upload/download test and the times were normal. I also restarted my modem, with no change. Other strange changes are that the wireless signal is weaker and it was slowing a few hours before it stopped showing some websites. Also, will load, but only the text of the nav bars. There are no graphics or other information. This has never happened before.

I have not done anything new manually to the modem or my computers. The only significant change was a power outage due to heavy wind that occurred a little over 24 hours earlier. I'm so confused by this that I don't even know what else to look-up or test. Why would a bunch of reliable websites suddenly time out while others still work? I don't think I can blame it on the servers of those web sites because the other sections of work, and loads, but does not load

View 1 Replies View Related

Cannot Obtain Ip From Websites?

Mar 30, 2011

This is not a problem with the computer it is a modem problem. It will not let me obtain an ip address from websites or connect to steam. It is a linksy's modem if your wondering.

View 3 Replies View Related

Cisco WAN :: Allow Only Few Internet Websites From 1841

Jan 12, 2011

I need to allow only a few Internet websites from Cisco 1841 Router for my LAN users. What Access-List should be used for this.

View 4 Replies View Related

Cisco Firewall :: Cannot Access Certain Websites Behind PIX 501 With 6.2 FW

Oct 9, 2012

I have a PIX 501 with 6.2 FW.  The firewall inside network is connected to a Windows server (Mailserver).  I can get access to most websites on all clients as well as on the server.  However, there are some particular websites, such as that the server and all but one client cannot access.  I get a "cannot display the webpage" in internet explorer.
I have disabled the Windows firewall and AV.  I have also scanned for any malware and no malware was found.
I found on the forums a "fixup protocol dns" solution, but my PIX version does not support it.
Below is my config:
PIX Version 6.2(2)
nameif ethernet0 outside security0
nameif ethernet1 inside security100


View 12 Replies View Related

Unable To Connect To Few Websites?

Mar 18, 2012

Unable to connect to certain websites. I can access almost everything except for a handful of sites. So far I've identified 3 sites.,, and I really need to access the umkc site for school. If I use a free proxy service I can pull the sites up, but with the amount I pay each month to Time Warner I shouldn't have to do this.

View 2 Replies View Related

Protocols / Routing :: Can't Go On Websites

Feb 26, 2011

The websites I usually go on now have some type of error page when I go to them. So far it has happened to 2 of them though they might not be related.

Here's what the page says:

Site 1- Valenth
Warning: mysql_connect() [ function.mysql-connect]: [2002] Connection timed out (trying to connect via tcp:// in /var/www/ on line 25


View 5 Replies View Related

Copyrights 2005-15, All rights reserved