Protocols / Routing :: Can't Go On Websites
Feb 26, 2011
The websites I usually go on now have some type of error page when I go to them. So far it has happened to 2 of them though they might not be related.
Here's what the page says:
Site 1- Valenth
Quote:
Warning: mysql_connect() [ function.mysql-connect]: [2002] Connection timed out (trying to connect via tcp://ec2-184-73-84-14.compute-1.amazonaws.com:3306) in /var/www/valenth.com/include/database.class.php on line 25
[Code]....
View 5 Replies
ADVERTISEMENT
Aug 20, 2011
why the WAN protocols like Frame-relay, HDLC and PPP are called Layer2 protocols?What is the address scheme they use?
View 5 Replies
View Related
Apr 5, 2011
I have got a PC at work (Windows XP Pro SP3) that is on two networks with the IPs 10.20.30.167, subnet 255.255.255.0 (internet enabled) and 10.0.0.20, subnet 255.255.255.0 (no internet). On the 10.0.0.X network there is a gateway with the IP 10.0.0.200 allowing access to another network; 192.168.60.X, subnet 255.255.255.0 (no internet). I have added the route on my work PC to access the 192.168.60.X network via this gateway and I can access all PCs on all three networks from this PC.Now, I am using LogMeIn Hamachi so that I can access the networks at work from home. The PC at work is the 'gateway' PC on the Hamachi network. When installing Hamachi it created a new network connection and bridged this connection with my 10.20.30.167 network adapter to allow access to the 10.20.30.X network from an external PC when connected using the Hamachi VPN connection. I have manually configured my Hamachi connection on my PC at home to the IP 10.20.30.169, subnet 255.255.255.0, with the default gateway set to 10.20.30.167. I can ping all computers on the 10.20.30.X network from my PC at home.
I then added a route on my PC at home for 10.0.0.X to go via 10.20.30.167 (the 'gateway' on the Hamachi network). I also enabled IP forwarding on the 'gateway' PC (my PC at work). I can not ping any PC on the 10.0.0.X network from my PC at home apart from 10.0.0.20 (the other NIC in the Hamachi gateway PC) and 10.0.0.30 (another PC on the 10.20.30.X network that is also on the 10.0.0.X network).Now, with IP forwarding enabled on the Hamachi gateway PC I would assume after adding the route on my PC at home for 10.0.0.X traffic to go via 10.20.30.167 that I would be able to ping all PCs on the 10.0.0.X network...I also tried adding a route on my home PC to send all traffic for the 192.168.60.X network via 10.20.30.167 which has a route via 10.0.0.200 to the 192.168.60.X network, but this also did not work.I then tried adding the 10.0.0.20 network adapter into the network bridge that the Hamachi connection made, also keeping both IPs (10.20.30.167 and 10.0.0.20) on this network bridge by adding them into the 'IP Settings' in the 'Advanced TCI/IP Settings'. I also added the 10.0.0.200 gateway for good measure. I still cannot ping any PC on the 10.0.0.X or 192.168.60.X networks from my PC at home.
I have also added the route to the 10.20.30.X network on a PC on the 10.0.0.X network to go via 10.0.0.20 and tried pinging a PC on the 10.20.30.X network but this also has not worked. Also setting the default gateway on a PC on the 10.0.0.X network to 10.0.0.20 does not allow this...Surely bridging the networks 10.20.30.167 and 10.0.0.20 on my work PC would allow another PC on the 10.0.0.X network to access the 10.20.30.X network after adding the route or setting 10.0.0.20 as the default gateway?
View 2 Replies
View Related
Dec 26, 2011
How can i create an top 10 list of the most popular website that users connect to through the ASA Firewall.
i have enabled HTTP inspect, and setup an Syslog server (S plunk), that collects all HTTP entries in the log, but i don't know how, to create an top list in s plunk.(don't if it is possible)
is there a better way to do this ? e.g. URL filter with web scene or IPS
View 1 Replies
View Related
Jan 10, 2013
Here's my setup:
- Cisco 1841 connected to the internet on fa0/1
- LAN connected to fa0/0/1 (switch port, connected to Vlan1)
On my LAN I have a web server that houses different websites. Those websites have DNS records that point to my public IP address, located on fa0/1. From the outside I can reach the websites perfectly, but I can't reach them from the inside. So it looks like I can't seem to connect from my local LAN address to the public ip address on the Cisco (who then should NAT it to the correct server)
Here is a snippet from my config:
--NAT--
ip nat inside source static tcp 192.168.0.3 80 interface FastEthernet0/1 80
ip nat inside source route-map Internet interface FastEthernet0/1 overload
--OUTSIDE INTERFACE--
interface FastEthernet0/1
description WAN
ip address dhcp
ip access-group WAN-IN in
[ code]...
--INSIDE INTERFACE--
interface Vlan1
description LAN
ip address 192.168.0.254 255.255.255.0
ip access-group LAN-IN in
[Code]....
View 3 Replies
View Related
Sep 2, 2012
I have two computers. Computer A is connected to the internet through GSM network. Computer A also have NIC adapter which is connected to local network with IP 192.168.33.10/24.
Computer B in connected to internet with DSL connection.
On both machines I use TeamViewer to make VPN secure tunnel between this two computers. Computer A gets IP:7.200.100.2 Computer B gets IP:7.200.100.3
How can I access from computer B to specific device with IP 192.168.33.250 which is on local network of computer A?
Is it possible to route traffic from VPN to other local network, or it is some possibility to use port forwarding from VPN connection to specific IP address on the local network to specific port number?
View 1 Replies
View Related
Apr 5, 2013
We have a PPPoE DSL link with a dedicated IP providing by a small ISP(ISP A) in Canada. We are having trouble reaching a small group of IPs in the US to be able to access some client resources.We have eliminated all possible local issues by removing the firewall and making a direct connection to the ISP. We have also had numerous tests prove successful when we use other local ISPs.
Trace routes show that the packets get dropped a few hops from the destination on a US ISP(ISP B).The routes even appear to be very similar to the other ISPs we tested. We escalated to ISP A and they say that everything is working properly on their end and the problem is with ISP B. They claim they "have no partnership with ISP B and therefore cannot create a ticket to get it resolved". I tried calling ISP B but I get nowhere because I am not a customer of theirs.
My solution is to give ISP A the boot, but management has denied that request because of the amount of effort required to switch over. How I can escalate this? Is there anyway to go over and above the ISPs?
View 4 Replies
View Related
Sep 5, 2011
I have an skill exercise with 4 Routing Protocols Default Route,Static Route,Eigrp, Ospf. I have about 6-7 routers, and each of them has an routing protocol. But the problem is the Main router INTERNET, which it has to use Static in a direction, and default in the opposite path. This is the scheme of routers and how the r.protocol have to be configured.
View 19 Replies
View Related
Sep 4, 2012
i've had this internet problem that has been going on with a wireless laptop i've had since april. it only happens on this computer, and i've tried many solutions. occasionally, i will try and go to pages on google chrome and an error pops up that says "this webpage is not available." when i play games that are online, they get disconnected as well. i've added google chrome and my other browsers to the firewall list and i've also changed the DNS server. when i use the troubleshooter it says something like "router, or modem is not connected to the internet. i've even downloaded the "fix it" program and it detected no problems
View 1 Replies
View Related
Jun 1, 2011
I can't get RDP to work on a specific computer.I've already set it up on the router, know the IP address, and I can get it to work great with the server, but the workstation we want it to go to won't accept it.I checked, it's set to allow RDP, the firewall exception was setup, also turned off the firewall completely, removed the antivirus software, checked TCP/IP filtering on the lan connection, even changed the listening port and still nothing.
View 9 Replies
View Related
Jan 4, 2012
Problem with a conflicting IP address. Basically on a normal running day my wireless is switched on and connected perfect to my internet, however if i want to download any large files i plug my Ethernet to my laptop and disable the wireless from my laptop, instantly then the LAN connection kicks in and im on the internet again as i find download speeds are faster through a LAN. However today my wireless is fine but the second i switch to LAN the ! symbol appears and a message says their is an IP conflict.
View 2 Replies
View Related
Aug 17, 2011
I've been timing out via any FTP client, including FileZilla, FireFTP, and a few others. I even downloaded a few just to see if I could connect with other clients.I contacted my host who can't recreate the issue on their end. I contacted my ISP who instructed me to use my command prompt in order to connect to their server, and that of mozilla. Both times I was able to connect via the command prompt.I don't understand what's going on.If I can connect to the sample sites that my ISP gave me, why can't I connect using an FTP client any longer. What possible change could have been made to have caused that disconnection that happened a few nights ago, and is now causing the timeouts I continue to receive?
View 6 Replies
View Related
Apr 12, 2011
How can i actually change my ip...tryed those cmd things but nothing works. Ineed to change ip somehow.
View 1 Replies
View Related
Jul 14, 2011
We know that every node in the network uses its routing table to forward the packets towards their destination. I have a doubt that which data structure used to implement these routing protocols.
View 6 Replies
View Related
Dec 8, 2012
encapsulation of routing protocols. Where exactly in the OSI, or TCP/IP for that matter, model does the data of the routing protocol fit into ? Is it encapsulated inside the transport layer segment payload ? So far from the I've gathered, that's where it should fit.
#####@@@@$$$$routing/procotocol/and/data/etc#####
#-Data link header and trailer
@-Network layer header
$-Transport layer header.
View 6 Replies
View Related
Dec 26, 2011
I just received a blu ray player for Xmas that has an Ethernet connection for streaming Netflix,YouTube, etc. my problem is my router is upstairs and the blu ray is downstairs. I really don't want to run an Ethernet cable from the blu ray to the router. Can I use another router on the same network and have it close to the blu ray?,I have a netgear router just laying around and the main router is a Verizon fios router.
View 4 Replies
View Related
Sep 2, 2011
I live outside the US but want to listen to US radio stations online and, naturally, a lot of them are blocked because I'm not in the US. I've tried a few places and applications, like UltraSurf, FoxyProxy, to get around this but they either don't work or are so convoluted as to be impossible to use. What else is out there that actually works and isn't pain to use?
View 1 Replies
View Related
Jun 1, 2011
I have a need to use two routers (Each with different ISP) on my (LAN) office network.I presently DO NOT want to go the (Two ISP's on one router, or Load Balancing router). I Just simply want two routers with two separate ISP's.I will assign the managers workstations to the faster ISP, and other Workstation to the slower connection.And it seems to work, and all resources seem to be available on the LAN, regardless of which (Gateway) Router(1 or 2) I point the workstation to.I assume because all devices are on the same LAN 192.168.0.XXX Is this a proper way to allocate and use two routers on the same LAN?
View 2 Replies
View Related
Oct 13, 2012
How to get the packet format of CFM used in the provider backbone domain having ethertype (0x88e7) & Itag fields in it. I think wireshark doesnt have this code implemented yet.
View 1 Replies
View Related
Feb 6, 2013
I need the capability to log into the 3g/4g modem and change the Wan IP address. Doe anyone know of a 3g/4g modem that allows you to do that. My other option would be to disable the wireless radio on the 3g/4g router and connect my Linksys Wireless router that I know I can log in and change the WAN Ip. It looks like to me that this model below would allow me to do that?MBR1516 Will turning off wireless radio on the 3g/4g router completely turn off all routing or could there be a conflict with my Linksys wireless router?
View 6 Replies
View Related
May 23, 2011
We have gotten a tv with wireless capability.I do not remember the WEP key.I currently have my laptop pc and a HP printer working with my D Link router. I have gotten as far at the set up page for the router and am wondering if I change the WEP key, will it automatically update the existing devices (my laptop and printer) or will they be locked out? Can I use the same code for all 4 WEp keys ?
View 6 Replies
View Related
Apr 28, 2012
I have two different networks on same LAN.One net has public 2xx.x.x.x IPs (some on DMZ, they are servers with their own internal firewalling) and goes through a GBeth switch to a Cisco 25xx router for accessing HDSL modem with several HDSL trunks and then Internet. That router is configured to let external IPs access only DMZ IPs, of course.The other net has 192.168.x.x IPs and goes through another GBeth switch to a DLink router to access ADSL. Mainly for download traffic at a low flat cost.I would like to have a way to let the 192.x.x.x machines access the servers on the DMZ of the 2xx.x.x.x net without going outside the physical LAN. The servers host mail services and so sending heavy attached documents needs a hi-speed LAN connection and certainly not the ADSL upload capability. Not to say about servers web contents maintenance.
View 1 Replies
View Related
Nov 3, 2012
I have a problem, i have a DIR-620 wireless router, i can connect to wifi my both ipad and iphone but i cannot connect my laptop, even cannot access the admin page for settings, cz it seems my laptop cannot see my my network...
View 1 Replies
View Related
Feb 4, 2012
I am using RealVNC, have the Viewer and Server installed on three systems on my home network. I have a laptop which I am trying to use to connect to either of my two PC's, but cannot get them connected.With that being said I did have some luck with RealVNC as I have the 5900 and other ports forwarded and was able to connect with my Android tablet and Android Phone to the my two PC's and laptop with no problems....well kind of. I did have issues with this at first till I figured out I had to use a 142.*.*.* ip address because my network ip adresses were behind a NAT IP.Now back to the connecting my laptop to my two PC's issue.I have tried using the 142.*.*.* ip address and I have tried using my network ip 192.*.*.* to no avail. I just can't seem to connect.
View 5 Replies
View Related
Feb 24, 2012
I somehow have managed to get opendns blocking access to websites on my home networkI am the administrator and the only person who would have (accidentally) installed opendns, although when I search through my computer, I don't see any files relating to this.I have done a little research and know that I would have to installed this at some point myself, but I can't recall doing this, and would really like it gone. So far, I have contacted my ISP and asked them to issue me a new IP Address. That did not work. I tried ipconfig/flushdns, ipconfig/release & ipconfig/renew, all did not work[CODE]
View 17 Replies
View Related
May 14, 2011
I have a small network (10 computers) with 1 SBS 2003 domain controller.There are 3 cables plugged into the Cisco PIX...
>One ethernet cable to our switch
>One console cable plugged into our server
>And of course the power cable
I need to , but I noticed something I've never seen before.... When I unplug the CONSOLE cable our Internet shuts off.I would expect that of the ethernet cable, but not of a console cable.I'm an experienced network tech, but not a Cisco guy. Am I missing something? Is this type setup typical of a Pix?
View 3 Replies
View Related
Jun 9, 2011
I have a dell laptop. It will pick up and connect to the neighbors wifi. But when trying to connect to mine it will not acquire a network address. It continuously searches but says 0.0.0... it says the signal is excellent but will just not acquire the ip address. By the way, cell phones with Wifi connect to this network with no problems.
View 2 Replies
View Related
Sep 26, 2011
recently we had a small blackout but electricity came back almost immediately. After that I had problems connecting to the internet with one of my wired connection computers (Windows XP). Connection has a Limited or no Connection status and the problem seems to be that the network doesn't assign a new ip adress.
C:Documents and SettingsAdministrator>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : paloalto
[Code]....
View 18 Replies
View Related
Sep 17, 2011
So I want to watch some videos on justin.tv, but for some reason I have been IP blocked. I actually went on their support forums and the guy basically said "I picked up a bad IP address", so I didn't do anything wrong, I just got unlucky.
View 3 Replies
View Related
Nov 28, 2011
I can access the website in other places(such as my library, another house, my university, my towns book store, etc.) but not at my own house. I can access the website anywhere but my own home! I contacted my ISP provider and he said that the website was not blocked by the ISP provider because the ISP consultant was able to access the website .I know the problem isn't rooted in my computer and believe that the problem is IP related because I was not able to access the website on either of the three computers at my house.
View 4 Replies
View Related
Feb 9, 2011
I want make a workgoup network with my friend by VPN.we are connected throw internet to make the VPN connection.I configed a VPN server with incoming connection. client connected to server succesfully.but sever and client havent any data send or recieve. the server dont set an ip for client.this is connection propertice: as you see there is no data sending or dara recieving..Im using ADSL Modem(tp-link 8811) and have two lan networks with Modem and another computer.
View 1 Replies
View Related
Feb 16, 2012
Keep a log of my own (Wan) IP-adress. It should look up my own IP-address and write it away to a log, so that I can look up a few weeks or months later what my IP-adress was on a certain day. I am using a router at home.
View 6 Replies
View Related
Mar 5, 2013
See attached diagram, which shows me using the tp-link router to protect my internal network from the guest network for internal security.Should I put the tp-link router into a DMZ on the first main Orcon router to be able to make remote access form the web into my network? I have an IP camera etc that I need to access from the WWW. If I do this does this have any security implications; both for my network or the guestsMy reasoning is not; as the TP-Link still acts as my firewall and the specific address of the TP-Link doesn't affect the guest, but I thought I'd check with the Pros!?
View 1 Replies
View Related
