Cisco :: Aironet 1130g And Windows 2003 With ACS?
Jan 2, 2011
i have configured windows 2003 server with DNS ,Active directory users and dhcp server. and configured my cisco 1130g AP .i have installed cisco access control server 4.0 because i use LEAP authentication protocol and for the ACS for network configuration i give aaa client ip addresss as AP interface ip and same shared secret for the AP and ACS,.so when i log to wifi it ask username and password problem is lap top cannot have a ip address my dhcp server not issue any ip address .my hiper terminal massage is like this when i connect to wifi?
View 17 Replies
ADVERTISEMENT
Apr 18, 2012
I wan to access a folder shared on windows 2003 server 32bit from a Windows 7 64bit ultimate WS. but after asking password, beside giving correct password, it asks again and agian and do not show folder
View 1 Replies
View Related
Sep 18, 2012
We have a network of approximately 20 computers, network printers, and one Windows 2003 Server (used simply as a file server). I have an issue with two specific Windows 7 Pro workstations that just will not logon. The username and password details we're using are correct, but the server rejects them. I can logon using the same account from any other Windows 7 Pro workstation, or Windows XP station, so I know the issue is specific to the two workstations communicating with the server.
Both afftected stations show Logon attempted by: MICROSOFT_AUTHENTICATION_PACKAGE_1_0 error 0xC000006A which all searches on Google point towards incorrect login credentials, however I've tried plenty of perfectly valid login credentials and they don't work either.I've tried checking that the 128bit option on the Windows 7 machines is disabled in file sharing etc.
View 5 Replies
View Related
Aug 23, 2012
I am trying to lab up an ACS5.2 with windows 2003 AD for PEAP authentication. But my ACS does not join the AD and throws an error "can not resolve network address". But when i do an nslookup on ACS CLI , the same domain wireless.abc.com is returning with the IP address of my AD. I think i am missing something in windows AD/DNS configs here as i am not a windows AD expert.
1) My AD domain is wireless.abc.com. In my DNS, i have a zone called wireless.abc.com. and i have added "New Host" in that DNS zone with the "name" as blank and providing IP address of my AD (AD and DNS are on same windows installation) . Is this the right way to do ?
2) I should be entering "wireless.abc.com" in the ACS active directory domain name field and do test connection. right ?
View 15 Replies
View Related
Mar 14, 2013
I'm currently in the process of replacing SBS 2003 x 64 on my Poweredge 2900 server. I would prefer to upgrade to Windows 7 x 64, but would do XP in a pinch.
View 4 Replies
View Related
Sep 18, 2011
How do I disable ICF In windows 2003
View 1 Replies
View Related
Feb 20, 2012
How to update windows 2003 from a CD.
View 2 Replies
View Related
Dec 26, 2010
In my organization we are having 12, LMS 3.2 servers deployed across the globe. As per Audit policy we need to deploy Microsoft win2003 server security patches on all servers using WSUS. Every month our server team sends us query before applying the patches regarding it's compatibility with LMS.
View 4 Replies
View Related
Sep 22, 2011
While LMS 4.0 is supported on Windows 2003, it appears that LMS 4.1 is not, per release notes. Is that a hard and fast rule? Will 4.1 install and run on Windows 2003, although not supported? I have 4.0.1 running on Windows 2003 and would like to upgrade to 4.1 but cannot upgrade to Windows 2008 at this time.
View 1 Replies
View Related
Feb 2, 2011
A windows server (W2000) acting as remote access server (The LAN we are trying to reach is behind this equipment). In other site we have a 881 ISR.I need to configure a VPN between the Server and the CISCO. The goal is to access from the PC behind the CISCO to the corporative LAN where the access server sits on without install the CISCO client in every client PC.
View 1 Replies
View Related
Nov 23, 2011
I have an Active Directory with Windows 2003 Server and all clients with windows xp and I set default group policy for all clients now I install windows 7 ultimate on one computer and want to join it to domain I have tried to join it and it was. But the policies which I set for windows xp machines on Domain are takes place by windows 7 eg. The basic theme of windows 7 was replaced with classic theme of XP. how can I set separate policies on domain for windows 7 client?
View 5 Replies
View Related
May 16, 2012
I want to limit the concurrent login my users can have. I have downloaded and installed Limit Login from Microsoft and followed the directions to a T. However, when users login it doesn't do anything. The scripts don't run (I have them listed in the logon and logoff scripts for users in the default domain policy). The scripts are stored in a share that everyone has read access to. What am I doing wrong? I have installed and uninstalled a million times following the MS directions included with the software to the letter, but it won't work. At one time I had it working and then we had some network problems with profiles and it got messed up in that process. Now I'm trying to get it back, but can't. Even uninstalling and reinstalling.
View 2 Replies
View Related
Sep 1, 2011
on a network l can't access windows 2003 server, but l can access xp from windows 2003 server
View 1 Replies
View Related
Jul 11, 2011
I have a windows 2003 server. It had been working and then a couple of days ago the computers on the network could no longer find the server. I cannot ping the server anymore. I have replaced and tested all cords and routers between the computers and the server
View 5 Replies
View Related
Apr 9, 2012
I'm having trouble to connect the router to windows server 2003 ( I set up this latter as a router) I have also set up the loopback
View 4 Replies
View Related
Nov 29, 2011
I have a problem when I try to install ACS 4.2 on Server 2003 R2. When I start the ACS setup, i recive an error message saying:
View 6 Replies
View Related
May 16, 2011
We have a 1941 router configured with LAN/WAN access. Additionally, we need to allow outside Microsoft RRAS connections to an inside Windows 2003 R2 Server. What commands are required to enable this?
WAN IP: 211.XXX.XXX.XXX
Server IP: 10.XXX.XXX.XXX
We've configured the 1941 router to allow outside RDC/RDP to the server at 10.XXX.XXX.XXX
View 1 Replies
View Related
Jul 5, 2012
I planned for my customer to replace his old LMS 4.0.1 server under Windows 2003 by a new server under Windows 2008 R2.Customer wants also to set a new LMS name and IP address for the new server under Windows 2008 R2 and keep both servers on the network.I'm wondering what could be the best procedure to do that migration.Can I used backup / restore procedure in that case ?If yes, what file must I modify to adapt the new LMS configuration to new hostname and IP Address ?
View 2 Replies
View Related
Aug 23, 2011
how to block bad websites from windows server 2003
View 2 Replies
View Related
Jun 22, 2012
Need to rebuild the server in different hardware.Replace adc server in windows 2003 domain
View 1 Replies
View Related
Feb 19, 2011
how to install vpn on windows server 2003
View 1 Replies
View Related
Aug 29, 2011
can you show me some screen shots on how to share file in the windows 2003 server operating system?
View 1 Replies
View Related
Jun 6, 2011
I am runing ACS 4.2 on Windows 2003 and for some reasons I need to rename the server name?
View 1 Replies
View Related
Apr 22, 2011
i have installed system (Windows Server 2003) and i have configure Active directory for testing and configure one user under it ( TEST01)now on the same machine i have installed Cisco ACS 4.2.i'm trying to Authenticate (TEST01) using ACS but it's not working, i can't even see the logs under EVENTVIWER. simple and easy to configure since both AD and ACS is on the same machine.
View 4 Replies
View Related
Sep 19, 2012
I am trying to configure a 2901 router to act as NTP server on my network.This set "ntp master" in the router.I have no possibility to access an NTP server on the Internet.Now I want to configure a Windows 2003 DC to update the time from the NTP Server (router 2901).In Windows 2003, the registry value "Ntp Server" may have to be IP addresses or FQDN? (In my case I put router_ip_address, 0x1) 0x1 = use this "SpecialPollInterval" to update the time? Where you can find that these actions mean "next action is 3"? In Event Log in Windows 2003 DC receipt Event ID 35:The time service is now synchronizing the system time with the time source ROUTER2901_IP (ntp.m | 0x1 | W2K3_SERVER_IP: 123 -> ROUTER2901_IP: 123).Configure "Special Poll Interval" in 10 seconds.But the time on the Windows Server 2003 DC continuous five minutes ahead of time compared to the 2901 router.
View 2 Replies
View Related
Apr 25, 2011
In my collage i have a LAN to the wind server 2003 again i m also configure a small LAN may be take a 5 computer but the communication is not done.
View 1 Replies
View Related
Jul 27, 2011
I use server 2003 in my netwerk now I change the users computer from XP to windows 7, how can i set the icons on the users desktop in windows 7.
View 1 Replies
View Related
Sep 22, 2011
I need to create a login script for all users. I am running Win xp Pro and Win 7 on my domain. the Server is windows 2003.
View 1 Replies
View Related
Mar 8, 2011
how to change a windows 2003 server name through client
View 1 Replies
View Related
May 16, 2011
i have recently added to a domain. The initial setup is a server running windows 2003 and several xp machines which logon to the domain using mandatory profiles. However, after adding windows 7 machines and logging them on to the system it doesnt load the profiles. (which is fine as I understand you cannot use the same profiles with windows 7+xp)The problem is it automatically creates a roaming profile when logging off and saves it back to the same path as the other profiles under user.V2 which is growing considerably and causing huge logoff and logon times.How can I get the windows 7 machines to not attempt roaming profiles back to the server and instead to just save the profiles locally when logging off.
View 14 Replies
View Related
Aug 3, 2011
I've got a windows server 2003 running a big application (sage1000) but suddenly it seems that users cannot access the server by unc path.i've also test to access \server on the server itself doesen't work.
View 2 Replies
View Related
Apr 22, 2011
When I try and copy files from my Windows 7 Home PC to my Windows Server 2003 share, it copies so much then hangs the Server sharing. It then appears that the share has disappeared. If I copy from the Server 2003 to 7, it copies fine, and copying from XP to 2003 also works fine. I had a chat with a colleague who told me that he has the same problem copying from Vista to XP.
View 1 Replies
View Related
Aug 27, 2012
I have a windows server 2003 ent., with about 6pcs and a couple of macs. I don't want the server to connect to the internet, though every computer only has one network card. I want all the clients to access the internet but not the server. How do I set this up.
View 4 Replies
View Related
