Creating A Wireless Network For Internet Usage?
Nov 13, 2011
I'm having trouble setting up a wireless internet connection for my computers, I connected the patch cable from my modem to a wireless router, then connected to that network with a usb for my computer.I was able to connect to the network, but couldn't seem to actually get into the internet. Is there any solutions to this?
When doing ipconfig /all, the message I get is:
Windows IP Configuration
Host Name . . . . . . . . . . . . : Victors
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
[code]....
View 1 Replies
ADVERTISEMENT
Jun 24, 2012
I've been looking for a way to create an internet usage agreement page, but have been striking out..looking for users to initiate an http session, get proxied to "user agreement page" upon approval their http session is allowed.
View 5 Replies
View Related
Apr 3, 2013
however recently when i check my internet usage log on my wireless company (Rogers) the usage is totally off from what my bandwidth tracker shows me. So i decide to turn off my wifi and see what happens, there has always been this weird wifi connection appearing whenever my wifi appears, then afterwards when i turn off my wifi the suspicious wifi connections disappear. is this possible that someone is using our wifi? i might just be overreacting but it has brought me to concern that if the usage continues my family will have to end up paying over $30 for extra internet use. it is very frustrating me because when i check my DHCP client table it only shows 3 connection, ethernet - my desktop which is not turned on, 2 wireless connection - my laptop and my sister's laptop.
View 6 Replies
View Related
Feb 13, 2013
I'm having a problem with the memory and also trying to create some rules on the CISCO ASA. The version that I got installed was the 8.2.5.33 on a CISCO 5520 with 512 RAM, the memory usage is on 99% used, 1% free and because of that when I'm trying to create a new rule the firewall brings me the next error..So what I did was a downgrade to the version 8.2 (4) 4 and the memory went down a little (82% used, 18% free) but I still got the error when I'm creating an access rule on the device. One thing and I'm not sure if this could affect on the performance are the number of access list and the object groups that are created.
I already open a case with CISCO TAC and they are checking if the problem is with the memory capacity or maybe a memory leak.Also the doubt that I got is with the memory that I got now available should I can create access rules or 82 is still to hig to create a rule or and object group?
View 2 Replies
View Related
Apr 27, 2012
we have a high speed internet and my modem is capable of wireless what I want to know, is there a way that I can monitor how much my daughter is on her computer and what websites she is visiting without having to install a program on her notebook or having to check her history etc? I would like to be able to do it all from my computer
View 2 Replies
View Related
Jul 21, 2011
I would like a free tool that would moniter the internet usage of our network. it has about 20 computers and would like the following features: be able to show the usage of each computer the type of usage, ie, browsing, downloading, streaming a total usage Is there such a free program? would Microsoft Network Monitor 3.4 be able to do the trick if i learnt how to use it?
View 1 Replies
View Related
Oct 10, 2011
I have been involved in the Networking of a museum with a set of "Show" computers which display video, and for this reason cannot have anti virus installed becuase of the performace hit, and also the risk of pop-ups on the videos. They do however need to be connected to the internet as some are interactive and allow people to send simple emails, and they all need to allow remote support when things go wrong.It seems the networking was not thought out very well initially, and there is a single wireless router which serves the staff and public on a secured wireless network, but also serves the "Show" machines via a wired connection from one of its ports, which then connects to a master switch which serves the show machines.Now the wired and wireless is on the same network, and everything shares the same IP subnet (192.168.1.xxx), and this is not a good situation in terms of the securuty of the show machines on the wired network. So I need to work out a way to totally separate the wireless network (which will be very prone to people opening viruses in their emails etc), from the wired network (which will be the show machines which wont be touched by anyone).
I want to achieve this in the simplest and easiest way, and have been reading about the possibility of setting up a second wired router behind the current wireless one, with a different subnet IP address, to which the "Show" machines could be connected. The WAN port on this second router would connect to a LAN port on the wireless router, and thus the show machines could get their internet, but separated from the dangerous wireless network.Does this sound like a sensible start? Will the fact that the wired router (and show machines) are on a completely different subnet to the wireless router (and wireless devices), mean that the wired network will be protected? Or do I need to do more? And is this likely to work?
View 3 Replies
View Related
Feb 25, 2011
I was in a pub the other day. When I tried to use their wireless I was directed to a webpage to enter the password.I am a web designer and want to make a funky login page, not for a user ID. Just to enter the password to my wireless.How do I do this? Im not aiming to make my system more secure.
View 1 Replies
View Related
Feb 4, 2013
I have 2 laptops, one is running VISTA and one is running Windows 8. They are connected to my wireless router. I also have a desktop running Windows 7 that is wired to router. I have searched the internet and cannot find how to set up a new network without using a HOMEGROUP?
View 2 Replies
View Related
Oct 3, 2012
Basically what is happening is I have a fiber decoder whitch goes into My belkin modem which controls my phone and Internet and with the company I am with we need that modem, I also have a netgear router so I can have wireless through my house but I want to plug LAN into the belkin router and still use the netgear for transmitting wireless.In short I want LAN in belkin but still have the netgear transmitting wireless and everything on the same network,E.g I have a pioneer amp and I use the iPhone app icontrol over my wireless but I can't because the amp is plugged into the belkin and the app is using netgear.
View 1 Replies
View Related
Feb 9, 2013
Region : India
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP :
i need to create a network with four computers and i have a tplink gigabit switch(wired) and plan to buy a dual band wifi gigabit router the sending and receiving end are just about 10 meters and are parellel that is i have to transfer and share data across street i plan to use one of the computer as primary data server and one of computer wired in with it with cat 6 cable and two others across street with wifi the transmission has to be lossless as its accounting and varous other files are being shared?
View 1 Replies
View Related
Oct 30, 2011
How can I monitor broadband usage of multiple PC's connected to a wireless router/modem?
View 1 Replies
View Related
Jan 8, 2013
I'm experimenting/attempting to use a laptop as a network tap between my (DSL) modem and a wrt54gs by creating a bridge with two NICs in the laptop. My problem is I can't seem to get connectivity on the user end of the router. I can't ping the bridge from an end computer...
DHCP is disabled in the router, but even when manually configuring the IP address on an end computer and using the bridge as a default gateway I can't ping out.
Am I completely misunderstanding the purpose of a NIC bridge?
View 1 Replies
View Related
Apr 15, 2012
I just have an experience to relate. I was provided the Cisco DPC 3825 unit for my home by my ISP. I couldn't get a strong enough signal to reach my smart tv about 50 to 60 away from the unit, which is in my office for computer uses. I purchased a Netgear extender to extend the signal. I was having trouble connecting the extender to the Cisco unit and get an internet connection. So I phoned my ISP and was told by the person on the phone that their Cisco unit cannot connect to this extender.
I found out that the Cisco unit was set to hidden by my son. After changing this setting I was able to easily connect the Netgear extender to the Cisco unit and get internet and a strong enough signal to my smart tv.
View 1 Replies
View Related
Mar 24, 2013
I have a WRT54G routher hardlined to a Ubuntu 12.04 server that is dedicated to minecraft.I have two ports opened for Minecraft to run off of.I'de like to give remote access to the computer to other people to maintain the server.BUT I need to restrict ANY and ALL ability for them to access the internet by either blocking all other ports or something else. Id rather not have to restrict it through Ubuntu if I don't have to.
View 1 Replies
View Related
May 20, 2011
I'm trying to set up a network for a friends small office so we can share files between each of the computers.i have tried to do it through the workgroup but with no luck as some can see the other machines and some cant?
Hardware/software:
Thompson wireless Router
laptop with Windows 7
laptop with Windows Vista
laptop with Windows XP SP2
Mac
I have set the network discovery to on in W7 & Vista and and ran the network wizard in XP At the moment the vista and W7 machine can see each other but i get and error saying cannot access //(computer name)with the W7 and XP machines i can send a file when i type in the ip address (//192.168.1.?) into the W7 search bar but the XP computer is not shown in the network folder?
View 2 Replies
View Related
Dec 18, 2012
So i'm new to this sort of thing i am building up 2 gaming pc Windows 7 so while i have both for a few days i would like to network them so that when i want to play a car racing game via lan the other pc will detect itone gaming pc is mind the other my fren so until i deliver it to him i have it for a few days so i wanted some practice in thisso i have a WIF arris modem with 4 Ethernet ports so both sys will be connecting through cablesi would like a step by step guide as to how to go about doing this creating domains et
View 2 Replies
View Related
Mar 16, 2013
I'm starting college in the fall and will be living in the dorms on campus. I want to have a "private network" setup within the university's network in my dorm room so my and my roommate's phones and iPads can still find my Apple TV, file sharing and network drives are still possible, and I can easily set up my network printer. Obviously, I don't want to lose Internet connectivity. Can I use NAT to accomplish this without losing Internet connection through the university?
how the sysops will hate me if they find me, I know this. It's not for malicious use, only for ease of use of my devices.
This may be totally off base, that's why I'm asking if this will work before I try it. I have an old WRT54G I would like to use if its capable, if not I'll buy a new one but I'm trying to avoid that. Here's what I'm thinking:
My router plugged into the University's Ethernet port in my room (for this setup do I use a LAN port or the WAN port on the router?) DHCP disabled, all devices static IP On the "Advanced Routing" tab: "Router" mode, not "gateway" mode What should my destination LAN ip be? Gateway? LAN & Wireless or WAN?
Switch connected to the router
Devices connected to the switch or connected wirelessly Should my gateway and DNS on each device be the host address assigned to my router?
View 5 Replies
View Related
Nov 29, 2011
I am having a problem in which when ever I check "Computer" later on in the day, one of the network drives is duplicating itself over and over using a different drive letter each time. By the end of the day if untouched I can have approx 20 of them!To give you more information about the scenario, the computer is on Windows 7 pro, it is on a domain in which the server is 2008 r2, there are 2 network drives in total (only one is duplicating), the only 2 changes I recall that may have caused it is box.net is running on the server syncing all content on the networks drives and a new printer has been added on the network.
View 5 Replies
View Related
May 5, 2012
Alrighty, a little misdirected here. been reading docs for a little while and experimenting around maybe someone can point me in the right direction, How to you create a Guest Network in IOS Zone Firewall. For some reason Cisco, while using the term DMZ, applies differently on their routers than it does on their ASA's. I know how to do this on ASA's all day long however on the router it is a little different story.
View 5 Replies
View Related
Jul 13, 2011
i have been wanting to do this LAN sharing thingy for a while now.so here's the deal.i wanna do is setup our PC's so we could create a network of our own and share files just like in LAN but not over the internet.its kinda like we would on a Homegroup in win7.also have a few more PC's on different ISP's.can they be added to the network too?
View 7 Replies
View Related
Oct 28, 2012
I just got done running CAT 6 wire's into different rooms and placing jacks on the wall which all works correcting going into the patch panel. The problem I am having is that the Access Points on the ceiling I decided to make it a little easier and use regular network cable and cut one end off and place it into the patch panel the same way as all the jacks. The AP's are POE and they are just not getting on the network. Do I need to do something different for this cable?The way I punched all the wall jacks and all the cables to the patch panel is by using section B on the jack so because of me cutting a cable and leaving one end on, should I use A or is there something else I should do?
View 3 Replies
View Related
Mar 10, 2011
I am having trouble creating a network bridge between my PC and Blu Ray player via LAN connection. I have done it before, but always run in to problems. I took my computer on vacation and messed up the existing connection and settings. Last time I successfully created the connection, I stumbled upon the answer, but can't remember how I fixed it. I should say that I can create the bridge, but once I do, the wireless internet connection no longer works, and my blu ray player can't connect to the internet either. I have forced compatibility mode on the wireless network via DOS, but no luck. I did the same on the LAN connection just for the heck of it. Still no luck.
View 10 Replies
View Related
Jan 11, 2013
How do I go by setting up a small network in my office with 3 computer. Reason is to share files, printers, internet.
View 1 Replies
View Related
Jan 17, 2013
1.create a drawing showing a private routed network.
2. On this drawing you will show your placement of the following,why they were placed there (you can use one or more of the servers/router listed in your drawing):
View 1 Replies
View Related
Jul 24, 2012
I'm currently staying at a marriott in NYC and at night after work the wireless access becomes awful. As a work around I've plugged the ethernet into my apple airport express and launched my wireless network as usual.Things are all fine and dandy for the first hour or so of browsing or watching netflix. But then it seems to lock up and I lose connection. I haven't seen any caps on data transfer that would explain it but is there something else I should be looking at? The fact that it works (albeit for a limited time), is a good sign I think. I'm mostly using it for my ipad to watch netflix etc.
View 2 Replies
View Related
Dec 29, 2012
I have a wired DLink DGL-4100 as my main router and DHCP server. Attached to this, I have a hard-wired Linksys WRT610N which is acting as a dual-band access point. All are on network 192.168.1.0/24.I would like to create a second "guest" wifi network using a spare DLink DIR655 router. Guest clients should have access to Internet but absolutely NO access to machines and resources on the 192.168.1.0/24 network.I connected the DLink DIR655 WAN port to one of the Linksys LAN ports (since it is basically a switch). I configured the DLink DIR655 with LAN IP 192.168.2.1, activated its DHCP to give out 192.168.2.100-105. I set the DLink DIR655 WAN Internet Connection Type as Dynamic IP (DHCP). The DLink DGL4100 assigns an IP to the DIR655 on the WAN side (e.g. 192.168.1.200).With this setup, wireless clients on the DLink DIR655 2.0/24 network get assigned an IP on the 2.0 network. They can access the Internet. However they can still see all the 1.0/24 clients. how come the networks aren't isolated?How should I set this up properly?Do I need to use the DMZ setting on the DLink DGL4100?I know I could get rid of the Linksys and use the Guest Access feature on the DLink DIR655. However I would like to use the Linksys for its dual band feature.
View 4 Replies
View Related
Feb 1, 2011
I'm in a house on a network that has 2 Macbooks, 4 notebooks running either Windows Vista or Windows 7, and 3 desktops running either Windows Vista or Windows XP. (Sidenote: No, they're not all accessing the network at the same time; actually some of them are hardly ever even turned on but it's important to include them because of the questions to follow.) Out of all those machines, one desktop running XP and one notebook running Vista are mine.Now, my family's pretty private, so we have file sharing turned off on all the computers. The problem is it's really a pain to have to transfer files between my laptop and my desktop, which I do fairly often because some of my schoolwork is done on the desktop (bigger screen), while some is done on my laptop (portability), and I also have a partition on the desktop's hard drive specifically for backing up files. When I want to transfer files, whether it's one file or 10,000 files (which I had to do the other day, actually), I either have to:
a) e-mail the file to myself if it's not too large and open it on the other machine
b)use my flash drive to transfer files
c) use a usb transfer cable, start the software, log in to the connection, etc etc.
simply create a new Workgroup on the network with just my 2 machines in it, so I can put all the files I want to share/move between them on the network instead of manually transferring them. I've already taken care of that step (creating the Workgroup, that is), so for the sake of not being confusing, I'll call my network "Network" and my workgroup "Mygroup" and whatever workgroups the other computers might be in "Theirgroups". Now that I've figured out that it's possible for Mygroup and Theirgroups to co-exist on Network, what about the actual file sharing? If I set up file sharing will only the 2 computers in Mygroup have access to them, or will the computers in Theirgroups have access as well since we're all on the same network? If the computers on Theirgroups will have access as well, is there any way I can make it so that only Mygroup will have access?
View 6 Replies
View Related
May 19, 2012
Our home situation is: We have 3 Mac computers, 2 PC's (all home/office use) and loads of phones and other equipment. Each computer stores files independently, there is peer-to-peer wireless sharing (through the OS) but no true central file sharing.Our existing network situation is: We have O2 Broadband but don't use the O2 equipment. We use a Netgear ADSL2+ modem (delivering 5/6-7meg) connected to a Time Capsule that offers us home backup for our Mac computers and also acts as our wireless router. We broadcast in dual-band 802.11b/g and 802.11n simultaneously (as there are a range of systems that need different bands). We then use 2 Apple AirPort Express access points around the house to extend and amplify the signal - although these can sometimes be temperamental.
View 12 Replies
View Related
Nov 14, 2011
I have a relatively simple question. I would like to create a private network within a larger network, the private network having several clients. I would ideally like the router to appear as the only device on the larger network and all data to be sorted by the router to the clients in the private network.
Will the Netgear FVS318G be able to do that? It seems to have the necessary NAT options. I'm hoping to use this since it's low profile. Many to one NAT should accomplish this, correct? The larger network should only be able to see the one device and not the clients behind it on the private network?
View 2 Replies
View Related
Mar 3, 2011
how to access the internet usage, so that not to exceed the limit i.e, 1gb
View 5 Replies
View Related
Mar 12, 2012
So you've got broadcast networks - Ethernet, PPP networks such as serial & T1/E1 and then youve got Non-broadcast multi-access links such as Frame relay and ATM. I understand the concepts of each. That's not the problem.My question is, is it possible create a broadcast network (Ethernet) but also connect a router to another router via a PPP connection? Say to a specific branch for example. Just curious if you can use multipule link types.
View 4 Replies
View Related
Sep 3, 2012
We have BSNL Broad Band. We have distributed connection between us. So, We want to know, that How many uses of Internet are Every Member using Such as DownloadingUploading, Etc.
View 1 Replies
View Related
