D-link Dir-655 :: Creating A Guest Wifi Network?
Dec 29, 2012
I have a wired DLink DGL-4100 as my main router and DHCP server. Attached to this, I have a hard-wired Linksys WRT610N which is acting as a dual-band access point. All are on network 192.168.1.0/24.I would like to create a second "guest" wifi network using a spare DLink DIR655 router. Guest clients should have access to Internet but absolutely NO access to machines and resources on the 192.168.1.0/24 network.I connected the DLink DIR655 WAN port to one of the Linksys LAN ports (since it is basically a switch). I configured the DLink DIR655 with LAN IP 192.168.2.1, activated its DHCP to give out 192.168.2.100-105. I set the DLink DIR655 WAN Internet Connection Type as Dynamic IP (DHCP). The DLink DGL4100 assigns an IP to the DIR655 on the WAN side (e.g. 192.168.1.200).With this setup, wireless clients on the DLink DIR655 2.0/24 network get assigned an IP on the 2.0 network. They can access the Internet. However they can still see all the 1.0/24 clients. how come the networks aren't isolated?How should I set this up properly?Do I need to use the DMZ setting on the DLink DGL4100?I know I could get rid of the Linksys and use the Guest Access feature on the DLink DIR655. However I would like to use the Linksys for its dual band feature.
View 4 Replies
ADVERTISEMENT
May 5, 2012
Alrighty, a little misdirected here. been reading docs for a little while and experimenting around maybe someone can point me in the right direction, How to you create a Guest Network in IOS Zone Firewall. For some reason Cisco, while using the term DMZ, applies differently on their routers than it does on their ASA's. I know how to do this on ASA's all day long however on the router it is a little different story.
View 5 Replies
View Related
Feb 27, 2012
I would like to integrate our intranet web page with Cisco WLC 2500. Is it possible to integrate custom web page with WLC. I know, that I can create custom authentication page, but what about creation of the user?
View 5 Replies
View Related
Jan 17, 2013
My customer need creates some separately web portal for some SSID (Guest and Staff), 01 web portal for Guest and 01 Web portal for Staff. Can WLC2504 can support this features ?
View 2 Replies
View Related
Mar 15, 2012
My router a E4200. the thing is i want to disable the dhcp services from the router, because there are allready a dhcp server in my network. but if i disable the dhcp will the Guest wifi functions still work?
View 3 Replies
View Related
Apr 16, 2011
I've been fighting the Rev A4 HW and 1.3x firmware stability issues. I would like to try the 1.21 firmware, but I use the guest network feature. The unofficial backrev'in instruction look to be a PITA... and I just would like make sure the guest network feature exists in the 1.2x firmware before I got through the trouble.
View 2 Replies
View Related
Feb 9, 2013
Region : India
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP :
i need to create a network with four computers and i have a tplink gigabit switch(wired) and plan to buy a dual band wifi gigabit router the sending and receiving end are just about 10 meters and are parellel that is i have to transfer and share data across street i plan to use one of the computer as primary data server and one of computer wired in with it with cat 6 cable and two others across street with wifi the transmission has to be lossless as its accounting and varous other files are being shared?
View 1 Replies
View Related
Oct 30, 2011
On the Dap1522 access point, in access point mode, would it be possible to have the following 2 features implemented?
1) Ability to simultaneously broadcast on the 2.4GHZ AND 5GHZ band.
2) Ability to specify a guest network.
View 2 Replies
View Related
Feb 1, 2011
Is there any way to access the router's configuration pages (192.168.0.1) via the Guest wireless network when routing between the zones is disabled?
Here's the story:
I am using my landlords wireless internet, but I administer the router myself. The router is 'upstairs' and i am 'downstairs' and he has his computer plugged into it plus one wireless laptop. He knows nothing about computers and is vulnerable to downloading viruses (and other ****) and I don't want my computers to be on the same 'network' as his.
I had a brilliant idea that since I am 100% wireless, I can make a guest network, put all my computers on that network and disable routing between them. Now all of my computers (some connected through a wireless bridge) can not see his computers at all (perfect!). The only problem now is I can no longer access the router config pages at 192.168.0.1!
Is there any way I can segregate my computers from his and also access the router config? I've tried accessing the WAN IP for the remote admin pages from inside the NAT, but it still blocks it.
View 6 Replies
View Related
Aug 18, 2012
I have a DIR-825 (hardware rev B1, v2.06 firmware) with 2 guest networks active (one on each frequency). I recently attached a laptop to the network using the computer's PCI NIC, with the wireless card completely turned off. Much to my surprise, Windows (7 Pro) indicated that I was connected to the 2.4GHz guest network. The only place in the router's configuration where the indicated name appears is in the "Guest zone" configuration page, where it asks for an SSID to use for the "wireless guest zone". Not only that, but it was the only connection that I could get for the computer, unless I turned the wireless card back on. That's also interesting because no other computer on the network, connected via cable, displays any "named" connection when viewing the networking properties. They simply show "Network" as their connection.
View 1 Replies
View Related
Jul 22, 2012
207.NA Firmware, B1 Hardware in use on a DIR-655, Time Warner Cable setup. Nothing to do with Revision, cordless phones,I saw this asked once before specifically here, but it was never answered.After several attacks via our cable network and neighbors, we've HAD to turn on MAC filtering. There are TONS of devices attached normally so two situations popped up:
#1: What happens when you max out the authorized MAC address listings? Does the page get longer when you save/reboot it? Do I have to do it manually from there forward and where can I get down to the core programming level to edit the code and put the MAC's that are around and on 100% of the time to open up the plug-in list on the GUI?
#2: Guest Zone - we NEED a way to have random guests get on our Network with a different password we can randomly change to prevent the outside abuse, etc. but am I understanding what little else has been posted that the MAC filtering also covers the Guest Zone and therefore I have to stick them in there before they could simply log on with the current password? Is there any way to change/stop that without eliminating MAC filtration as a whole?
View 4 Replies
View Related
Apr 13, 2013
Region : UnitedStates
Model : TL-WDR3600
Hardware Version : V1
Firmware Version : TL-WDR3600_V1_130320
ISP :
Has anyone gotten the Guest Network feature to work from the new firmware TL-WDR3600_V1_130320?I have my WDR3600 setup as an access point:TPLINK with static IP address connected via ethernet cord from the LAN port and connected to the main Verizon FIOS router which distributes DHCP IP addresses to the netwrok. Can not get the Guest Network feature to work - I see the guest SSID I created but when I connect to it, the IP address assigned is in the 169. range meaning it does not get to my main router.It may be because I have the TPLINK setup as an access point, so are there any people who have gotten Guest Network work either with the TPLINK as the main router or as an access point?
View 1 Replies
View Related
Oct 17, 2012
Any problems with the guest network on the ea4500 with the cloud firmware? I am losing guest clients after about 24 hours and the re-authentication fails. you enter the guest password and nothing happens until you reboot the router.
View 2 Replies
View Related
Jun 20, 2011
I have desktop with windows 7. I am connected to internet through D-link ADSL 2+ router using RJ 45 cable. I want to create wifi hot spot on this desktop. I tried installing connectify software. But when I try to configure hot spot with connectify it says No wi-fi device present. Now what hardware do I exactly need to turn my comp into wifi hotspot?
View 2 Replies
View Related
Jan 8, 2013
I'm experimenting/attempting to use a laptop as a network tap between my (DSL) modem and a wrt54gs by creating a bridge with two NICs in the laptop. My problem is I can't seem to get connectivity on the user end of the router. I can't ping the bridge from an end computer...
DHCP is disabled in the router, but even when manually configuring the IP address on an end computer and using the bridge as a default gateway I can't ping out.
Am I completely misunderstanding the purpose of a NIC bridge?
View 1 Replies
View Related
Oct 10, 2011
I have been involved in the Networking of a museum with a set of "Show" computers which display video, and for this reason cannot have anti virus installed becuase of the performace hit, and also the risk of pop-ups on the videos. They do however need to be connected to the internet as some are interactive and allow people to send simple emails, and they all need to allow remote support when things go wrong.It seems the networking was not thought out very well initially, and there is a single wireless router which serves the staff and public on a secured wireless network, but also serves the "Show" machines via a wired connection from one of its ports, which then connects to a master switch which serves the show machines.Now the wired and wireless is on the same network, and everything shares the same IP subnet (192.168.1.xxx), and this is not a good situation in terms of the securuty of the show machines on the wired network. So I need to work out a way to totally separate the wireless network (which will be very prone to people opening viruses in their emails etc), from the wired network (which will be the show machines which wont be touched by anyone).
I want to achieve this in the simplest and easiest way, and have been reading about the possibility of setting up a second wired router behind the current wireless one, with a different subnet IP address, to which the "Show" machines could be connected. The WAN port on this second router would connect to a LAN port on the wireless router, and thus the show machines could get their internet, but separated from the dangerous wireless network.Does this sound like a sensible start? Will the fact that the wired router (and show machines) are on a completely different subnet to the wireless router (and wireless devices), mean that the wired network will be protected? Or do I need to do more? And is this likely to work?
View 3 Replies
View Related
Mar 2, 2013
Model : TL-MR3420
Hardware Version : V1
Firmware Version : 3.12.8 Build 110418 Rel.43954n
ISP : SBB - Serbia Broadband[/COLOR]
I have been usung TP link for years, and now I want to use the 3G modem option the 3420 offers. But in the list of countries I can't find Serbia, and I can't find the ZTE MF 195. I found that on the TP Links site list of compatible modems there is Other countries, but in the modem list there isn't such an option, and since there is also no ZTE MF 195, and there isn't a "Telenor" entry for the service provider.I tried telling the router that I'm from another country, and setting up some of the parameters manually, but "surprisingly" it didn't work. Is there or could someone make a program which makes BIN files specific to the modem that isn't on the list, or is there a place where the BIN files grow?
View 2 Replies
View Related
Sep 2, 2012
I seem to be struggling to connect more than 4 cameras to my (ISP-supplied) modem/router by Netgear CGD24N via WPS. I'm on my 5th camera now (already have 3x 930L and 1x 942L) but the newest 942L just won't connect to the network at the moment and there's definitely no faults here as I swapped cameras today at the local retailer (and got an A3 942L!).I've even tried connecting the camera to my wireless extender (Netgear WN3000RP) but no luck there.
So far it has only worked twice for short periods of time (enough for me to configure the cameras) but since then I can't actually get it working. I've got a couple of spare wireless routers lying around too and should be receiving a DIR-600 soon (from the Netgear promotion in Australia) which could be useful?
View 1 Replies
View Related
May 20, 2011
I'm trying to set up a network for a friends small office so we can share files between each of the computers.i have tried to do it through the workgroup but with no luck as some can see the other machines and some cant?
Hardware/software:
Thompson wireless Router
laptop with Windows 7
laptop with Windows Vista
laptop with Windows XP SP2
Mac
I have set the network discovery to on in W7 & Vista and and ran the network wizard in XP At the moment the vista and W7 machine can see each other but i get and error saying cannot access //(computer name)with the W7 and XP machines i can send a file when i type in the ip address (//192.168.1.?) into the W7 search bar but the XP computer is not shown in the network folder?
View 2 Replies
View Related
Dec 18, 2012
So i'm new to this sort of thing i am building up 2 gaming pc Windows 7 so while i have both for a few days i would like to network them so that when i want to play a car racing game via lan the other pc will detect itone gaming pc is mind the other my fren so until i deliver it to him i have it for a few days so i wanted some practice in thisso i have a WIF arris modem with 4 Ethernet ports so both sys will be connecting through cablesi would like a step by step guide as to how to go about doing this creating domains et
View 2 Replies
View Related
Mar 16, 2013
I'm starting college in the fall and will be living in the dorms on campus. I want to have a "private network" setup within the university's network in my dorm room so my and my roommate's phones and iPads can still find my Apple TV, file sharing and network drives are still possible, and I can easily set up my network printer. Obviously, I don't want to lose Internet connectivity. Can I use NAT to accomplish this without losing Internet connection through the university?
how the sysops will hate me if they find me, I know this. It's not for malicious use, only for ease of use of my devices.
This may be totally off base, that's why I'm asking if this will work before I try it. I have an old WRT54G I would like to use if its capable, if not I'll buy a new one but I'm trying to avoid that. Here's what I'm thinking:
My router plugged into the University's Ethernet port in my room (for this setup do I use a LAN port or the WAN port on the router?) DHCP disabled, all devices static IP On the "Advanced Routing" tab: "Router" mode, not "gateway" mode What should my destination LAN ip be? Gateway? LAN & Wireless or WAN?
Switch connected to the router
Devices connected to the switch or connected wirelessly Should my gateway and DNS on each device be the host address assigned to my router?
View 5 Replies
View Related
Nov 29, 2011
I am having a problem in which when ever I check "Computer" later on in the day, one of the network drives is duplicating itself over and over using a different drive letter each time. By the end of the day if untouched I can have approx 20 of them!To give you more information about the scenario, the computer is on Windows 7 pro, it is on a domain in which the server is 2008 r2, there are 2 network drives in total (only one is duplicating), the only 2 changes I recall that may have caused it is box.net is running on the server syncing all content on the networks drives and a new printer has been added on the network.
View 5 Replies
View Related
Jul 13, 2011
i have been wanting to do this LAN sharing thingy for a while now.so here's the deal.i wanna do is setup our PC's so we could create a network of our own and share files just like in LAN but not over the internet.its kinda like we would on a Homegroup in win7.also have a few more PC's on different ISP's.can they be added to the network too?
View 7 Replies
View Related
Nov 13, 2011
I'm having trouble setting up a wireless internet connection for my computers, I connected the patch cable from my modem to a wireless router, then connected to that network with a usb for my computer.I was able to connect to the network, but couldn't seem to actually get into the internet. Is there any solutions to this?
When doing ipconfig /all, the message I get is:
Windows IP Configuration
Host Name . . . . . . . . . . . . : Victors
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
[code]....
View 1 Replies
View Related
Oct 28, 2012
I just got done running CAT 6 wire's into different rooms and placing jacks on the wall which all works correcting going into the patch panel. The problem I am having is that the Access Points on the ceiling I decided to make it a little easier and use regular network cable and cut one end off and place it into the patch panel the same way as all the jacks. The AP's are POE and they are just not getting on the network. Do I need to do something different for this cable?The way I punched all the wall jacks and all the cables to the patch panel is by using section B on the jack so because of me cutting a cable and leaving one end on, should I use A or is there something else I should do?
View 3 Replies
View Related
Feb 25, 2011
I was in a pub the other day. When I tried to use their wireless I was directed to a webpage to enter the password.I am a web designer and want to make a funky login page, not for a user ID. Just to enter the password to my wireless.How do I do this? Im not aiming to make my system more secure.
View 1 Replies
View Related
Mar 10, 2011
I am having trouble creating a network bridge between my PC and Blu Ray player via LAN connection. I have done it before, but always run in to problems. I took my computer on vacation and messed up the existing connection and settings. Last time I successfully created the connection, I stumbled upon the answer, but can't remember how I fixed it. I should say that I can create the bridge, but once I do, the wireless internet connection no longer works, and my blu ray player can't connect to the internet either. I have forced compatibility mode on the wireless network via DOS, but no luck. I did the same on the LAN connection just for the heck of it. Still no luck.
View 10 Replies
View Related
Jan 11, 2013
How do I go by setting up a small network in my office with 3 computer. Reason is to share files, printers, internet.
View 1 Replies
View Related
Jan 17, 2013
1.create a drawing showing a private routed network.
2. On this drawing you will show your placement of the following,why they were placed there (you can use one or more of the servers/router listed in your drawing):
View 1 Replies
View Related
Jul 24, 2012
I'm currently staying at a marriott in NYC and at night after work the wireless access becomes awful. As a work around I've plugged the ethernet into my apple airport express and launched my wireless network as usual.Things are all fine and dandy for the first hour or so of browsing or watching netflix. But then it seems to lock up and I lose connection. I haven't seen any caps on data transfer that would explain it but is there something else I should be looking at? The fact that it works (albeit for a limited time), is a good sign I think. I'm mostly using it for my ipad to watch netflix etc.
View 2 Replies
View Related
Feb 1, 2011
I'm in a house on a network that has 2 Macbooks, 4 notebooks running either Windows Vista or Windows 7, and 3 desktops running either Windows Vista or Windows XP. (Sidenote: No, they're not all accessing the network at the same time; actually some of them are hardly ever even turned on but it's important to include them because of the questions to follow.) Out of all those machines, one desktop running XP and one notebook running Vista are mine.Now, my family's pretty private, so we have file sharing turned off on all the computers. The problem is it's really a pain to have to transfer files between my laptop and my desktop, which I do fairly often because some of my schoolwork is done on the desktop (bigger screen), while some is done on my laptop (portability), and I also have a partition on the desktop's hard drive specifically for backing up files. When I want to transfer files, whether it's one file or 10,000 files (which I had to do the other day, actually), I either have to:
a) e-mail the file to myself if it's not too large and open it on the other machine
b)use my flash drive to transfer files
c) use a usb transfer cable, start the software, log in to the connection, etc etc.
simply create a new Workgroup on the network with just my 2 machines in it, so I can put all the files I want to share/move between them on the network instead of manually transferring them. I've already taken care of that step (creating the Workgroup, that is), so for the sake of not being confusing, I'll call my network "Network" and my workgroup "Mygroup" and whatever workgroups the other computers might be in "Theirgroups". Now that I've figured out that it's possible for Mygroup and Theirgroups to co-exist on Network, what about the actual file sharing? If I set up file sharing will only the 2 computers in Mygroup have access to them, or will the computers in Theirgroups have access as well since we're all on the same network? If the computers on Theirgroups will have access as well, is there any way I can make it so that only Mygroup will have access?
View 6 Replies
View Related
Feb 4, 2013
I have 2 laptops, one is running VISTA and one is running Windows 8. They are connected to my wireless router. I also have a desktop running Windows 7 that is wired to router. I have searched the internet and cannot find how to set up a new network without using a HOMEGROUP?
View 2 Replies
View Related
May 19, 2012
Our home situation is: We have 3 Mac computers, 2 PC's (all home/office use) and loads of phones and other equipment. Each computer stores files independently, there is peer-to-peer wireless sharing (through the OS) but no true central file sharing.Our existing network situation is: We have O2 Broadband but don't use the O2 equipment. We use a Netgear ADSL2+ modem (delivering 5/6-7meg) connected to a Time Capsule that offers us home backup for our Mac computers and also acts as our wireless router. We broadcast in dual-band 802.11b/g and 802.11n simultaneously (as there are a range of systems that need different bands). We then use 2 Apple AirPort Express access points around the house to extend and amplify the signal - although these can sometimes be temperamental.
View 12 Replies
View Related
