D-Link DIR-825 :: Cabled Connection On Guest Network?
Aug 18, 2012
I have a DIR-825 (hardware rev B1, v2.06 firmware) with 2 guest networks active (one on each frequency). I recently attached a laptop to the network using the computer's PCI NIC, with the wireless card completely turned off. Much to my surprise, Windows (7 Pro) indicated that I was connected to the 2.4GHz guest network. The only place in the router's configuration where the indicated name appears is in the "Guest zone" configuration page, where it asks for an SSID to use for the "wireless guest zone". Not only that, but it was the only connection that I could get for the computer, unless I turned the wireless card back on. That's also interesting because no other computer on the network, connected via cable, displays any "named" connection when viewing the networking properties. They simply show "Network" as their connection.
View 1 Replies
ADVERTISEMENT
May 4, 2011
i have a cabled connection to a router, and i know the login. Is there any way to get the wifi password, withough having to change it?
View 1 Replies
View Related
Apr 16, 2011
I've been fighting the Rev A4 HW and 1.3x firmware stability issues. I would like to try the 1.21 firmware, but I use the guest network feature. The unofficial backrev'in instruction look to be a PITA... and I just would like make sure the guest network feature exists in the 1.2x firmware before I got through the trouble.
View 2 Replies
View Related
Dec 29, 2012
I have a wired DLink DGL-4100 as my main router and DHCP server. Attached to this, I have a hard-wired Linksys WRT610N which is acting as a dual-band access point. All are on network 192.168.1.0/24.I would like to create a second "guest" wifi network using a spare DLink DIR655 router. Guest clients should have access to Internet but absolutely NO access to machines and resources on the 192.168.1.0/24 network.I connected the DLink DIR655 WAN port to one of the Linksys LAN ports (since it is basically a switch). I configured the DLink DIR655 with LAN IP 192.168.2.1, activated its DHCP to give out 192.168.2.100-105. I set the DLink DIR655 WAN Internet Connection Type as Dynamic IP (DHCP). The DLink DGL4100 assigns an IP to the DIR655 on the WAN side (e.g. 192.168.1.200).With this setup, wireless clients on the DLink DIR655 2.0/24 network get assigned an IP on the 2.0 network. They can access the Internet. However they can still see all the 1.0/24 clients. how come the networks aren't isolated?How should I set this up properly?Do I need to use the DMZ setting on the DLink DGL4100?I know I could get rid of the Linksys and use the Guest Access feature on the DLink DIR655. However I would like to use the Linksys for its dual band feature.
View 4 Replies
View Related
Oct 30, 2011
On the Dap1522 access point, in access point mode, would it be possible to have the following 2 features implemented?
1) Ability to simultaneously broadcast on the 2.4GHZ AND 5GHZ band.
2) Ability to specify a guest network.
View 2 Replies
View Related
Feb 1, 2011
Is there any way to access the router's configuration pages (192.168.0.1) via the Guest wireless network when routing between the zones is disabled?
Here's the story:
I am using my landlords wireless internet, but I administer the router myself. The router is 'upstairs' and i am 'downstairs' and he has his computer plugged into it plus one wireless laptop. He knows nothing about computers and is vulnerable to downloading viruses (and other ****) and I don't want my computers to be on the same 'network' as his.
I had a brilliant idea that since I am 100% wireless, I can make a guest network, put all my computers on that network and disable routing between them. Now all of my computers (some connected through a wireless bridge) can not see his computers at all (perfect!). The only problem now is I can no longer access the router config pages at 192.168.0.1!
Is there any way I can segregate my computers from his and also access the router config? I've tried accessing the WAN IP for the remote admin pages from inside the NAT, but it still blocks it.
View 6 Replies
View Related
Jul 22, 2012
207.NA Firmware, B1 Hardware in use on a DIR-655, Time Warner Cable setup. Nothing to do with Revision, cordless phones,I saw this asked once before specifically here, but it was never answered.After several attacks via our cable network and neighbors, we've HAD to turn on MAC filtering. There are TONS of devices attached normally so two situations popped up:
#1: What happens when you max out the authorized MAC address listings? Does the page get longer when you save/reboot it? Do I have to do it manually from there forward and where can I get down to the core programming level to edit the code and put the MAC's that are around and on 100% of the time to open up the plug-in list on the GUI?
#2: Guest Zone - we NEED a way to have random guests get on our Network with a different password we can randomly change to prevent the outside abuse, etc. but am I understanding what little else has been posted that the MAC filtering also covers the Guest Zone and therefore I have to stick them in there before they could simply log on with the current password? Is there any way to change/stop that without eliminating MAC filtration as a whole?
View 4 Replies
View Related
Apr 13, 2013
Region : UnitedStates
Model : TL-WDR3600
Hardware Version : V1
Firmware Version : TL-WDR3600_V1_130320
ISP :
Has anyone gotten the Guest Network feature to work from the new firmware TL-WDR3600_V1_130320?I have my WDR3600 setup as an access point:TPLINK with static IP address connected via ethernet cord from the LAN port and connected to the main Verizon FIOS router which distributes DHCP IP addresses to the netwrok. Can not get the Guest Network feature to work - I see the guest SSID I created but when I connect to it, the IP address assigned is in the 169. range meaning it does not get to my main router.It may be because I have the TPLINK setup as an access point, so are there any people who have gotten Guest Network work either with the TPLINK as the main router or as an access point?
View 1 Replies
View Related
Oct 17, 2012
Any problems with the guest network on the ea4500 with the cloud firmware? I am losing guest clients after about 24 hours and the re-authentication fails. you enter the guest password and nothing happens until you reboot the router.
View 2 Replies
View Related
Aug 17, 2011
I am wondering if I can re-distribute my cabled Internet (part of a LAN) to a separate network via a router? Well I tried to connect the ethernet cable from which I access the internet to the Fa port of a router and then tried to share the internet creating NAT pool in the router. I am not successful.
View 4 Replies
View Related
Mar 9, 2011
A while ago I bought a WRT320N as a trade-in offer, unfortunately I had around 20% packet loss on my connection after I set it up. If running directly through my cable modem I had no connection issues at all.I was running the whole setup cabled, and have no peripherals using the wireless connection.The router was returned to the retailer for RMA, and in the end I got the purchase credited.My setup ISP: Dansk Kabel TV (danish provider for internet, TV etc.)Modem: Netgear CVD31T DOCSIS 3.0 compliant Cablemodem (I do not have access to the modem, as it is provided by the ISP. I have now bought an E2000, and set it up in the same manner as the previous router.This has returned the same problems I had with my previous router.Updating the firmware didn't make any difference.Using Pingtest.net as my test reference I get results like this.when connected directly to the modem I get 0% packet loss, max 20ms ping and jitter is 2-3ms.Have I been so unlucky to get 2 faulty routers in a row, or could there be some problems with Linksys routers and Netgear?I have unsuccessfully tried switching cables without any change, tried moving the router "far" away from the modem, monitors etc to see if there could be any interference from the wireless.
View 2 Replies
View Related
Nov 25, 2012
im having a problem on my DIR-655, i just recently updated my DIR 655 2.03NA(which is no problem at all) to 2.10NA, & im having problem on my GUEST ZONE wireless network everytime i connect my Iphone 4 to it every second 10 seconds it goes on & off & i try to connect to the main wireless network it was working fine any causes to this?
View 14 Replies
View Related
Feb 18, 2013
What's the least expensive way to enable Guest Network authentication in a network with WLC 4404 controllers and no WCS? Management would like guests to register with a valid email address and enter a 'password du jour' to keep unauthenticated users from chewing up bandwith with automatic connections.
View 4 Replies
View Related
Oct 29, 2012
Having an issue with a Cisco Linksys E1500 on a home network. The device has a feature to provide a guest wireless network but the guest network can't get to the internet. A wired connection is fine, as is the normal wireless network but not the guest. The cheesy thing is, that it doesn't list an option for what type of wireless security protocol you want on the guest network. I'm assuming that it uses the same security protocol that the normal wireless network uses, but who knowsEspecially weird is that it asks you what password you want on the guest network but then the guest network show to be insecure when you try to connectthought maybe it was something funky with some of my configurations so I went ahead and factory defaulted it and just set it up with an insecure network for both the normal and guest networks. This didn't solve it. The guest network still couldn't get to the internet. In fact, the guest network can't even ping the router.
View 1 Replies
View Related
Oct 30, 2011
i am loaning my laptop to a friend to use while traveling and I have created a "guest user" account so he doesn't have to go through my home pages and personal files. Well, whenever this account is being used, there is no WiFi connection logo and so it cannot be connected to the internet via WiFi...
View 1 Replies
View Related
Jan 18, 2011
I have disabled the internal DHCP/DNS server in the routers firmware. I have enabled the wireless guest access SSID. A client associating with the Guest Wireless Access will obtain a DHCP address from the server in the LAN zone, but cannot resolve DNS as the firewall prevents traffic to flow from the Guest zone to the LAN zone, as it should.Is there a way to enable the DHCP server and DNS server in the routers firmware, but only on the Guest Zone? Is it possible to get the Guest Zone to have a different subnet?Tech support has hung up on me twice now.
View 5 Replies
View Related
Apr 28, 2011
I'm wondering if there is a way to prioritize traffic on the router's main WiFi over the guest zone or if there is a way to limit the bandwidth on the guest zone.
Ideally, I'd like to keep a locked primary WiFi for high-speed usage (I know, nothing it really ever secure) and an open guest zone for low-speed usage to whomever wants it. As far as I can tell, the DIR-655 doesn't support this kind of configuration.
View 2 Replies
View Related
Mar 23, 2010
I recently picked up a 655 with hardware version A2 and flashed to the latest firmware. I have a HotBrick router. I only want to use the 655 as an access point AND especially to use the Guest Access or Guest Zone feature to allow visitors to bring their laptops and not virus up my network. My home network is open among a few computers for things like SageTV, file serving, etc.I can get the 655 to function just fine as a standard access point by following the instructions to turn off UPNP, DHCP, etc. as outlined in the manual. I then enable the Guest Access/Zone feature, and of course give it a different SSID name, make sure it's on 24 hours a day, that it is enabled, etc.
But, none of my computers can access the internet via the Guest Account feature, just the regular wireless portion. They show connecting to the Guest Account name, etc. but no internet. I've disabled every security feature I know of to test this. Again, the "regular" WAP tests great, but no Guest Account, which is really important and one of the main reasons I bought the unit.I'm wondering - does the Guest Account feature only work if the 655 is the main router, has DHCP enabled, etc.? Does it have to be the one and only router? If so, I'm in trouble, because I can't really give up my HotBrick due to failover features, etc.
View 5 Replies
View Related
Feb 3, 2012
my wife and I both have samsung galaxy s2 smartphones that for the last 2 months since purchased worked fine when connected to the d-link network-suddenly,yesterday both phones disconnected and when we tried to connect and entered the WEP key that worked fine previously,neither would connect-I powered both phones off and on as suggested by ATT,but that did not work.
View 3 Replies
View Related
Nov 28, 2012
Can I set up a guest wifi connection on my Cisco WLC 2504 if I already have WLANs set up inside my corporate network? I want to use port 4 and connect it directly to my ISP so that it is outside of the corporate network. I set up an interface with a valid IP from the ISP and created a "Contractor" WLAN to use that interface.
View 6 Replies
View Related
Jan 25, 2011
I recently changed my ssid name from the default "dlink" to a more unique one. The problem is that the router is still broadcasting the default ssid along with the new one. Guest zone is disabled and the new ssid is hidden. But the default ssid is not hidded. Using wpa2 with aes, hardware ver. A1/A2 Firmware ver 1.21. How to remove the "dlink" ssid?
View 4 Replies
View Related
Jan 19, 2012
Have DIR-655, HW A3, F/W 1.10. On the Advanced tab, there is no Guest Zone option. Can this be fixed with a firmware update? If so, which one?
View 2 Replies
View Related
Mar 3, 2013
I am thinking of getting the DAP-1522 access point but I wondered. Can I set it to broadcast on 5GHz for my laptop and ipad, so they can stream video. Then set the guest zone to broadcast on 2.4GHz just for my lame printer, my printer does not have LAN and only wireless b & g. If I do put the printer on the guest zone and I enable routing between zones, will my laptop be able to print to my printer?
View 1 Replies
View Related
Apr 9, 2012
ok when i'm playing my xbox 360 my brothers sister and my dad are on computers playing games and watching netflix and i lagg alot is there any way i can get my own network connection my internet provider is century link.
View 3 Replies
View Related
Jun 30, 2011
I have battling this issue since I bought this router, at least 2 years.
Using:
DIR-615
PC XP Wired
2 Acer laptops Vista wireless
All DHCP reserved
Security using wpa_psk
Not sure what other router info you need. All are connected to the internet, but can't see each other on the LAN. We can see each other from time to time. Sharing is allowed. Passwords are shared. I can power off the router and the network will be fine for about a day, then gone again. Workgroups are the same.
View 14 Replies
View Related
Oct 13, 2010
I have just purchased a DCS 2121 (I assume that it is a similar model to the DCS 920 in US).I have this setup:
- Connected the DCS 2121 wireless to my Belkin Router with a fixed IP address. Firmware version 1.4 is installed on the camera.
- I have a Synology 209 NAS server with surveillance station that I have connected to the Camera.
I all works fine for 5 minutes to a couple of hours at which point the DCS 2121 loose connection to the Router and does not try to reconnect. If I turn the Cam on and off it will reconnect - and then loose connection again af a short time.This is totally frustrating since the purpose of the Cam is to work as a surveillance cam - it kinda loose its value by not being connected...
View 1 Replies
View Related
Oct 29, 2011
I have an E1000 router that's been fine until a few weeks ago. I have access but my guests are unalbe to get access. One of my guests looks like she's connected but can't acess the internet.
View 1 Replies
View Related
Jan 28, 2011
I have both working in a cluster and traffic is flowing but now I desire to seperate my intranet from internet guest traffic only. Having an issue with understanding how to accomplish this task. I have one 2003 server in the intranet that supports DHCP and using a private network address.
View 4 Replies
View Related
Jan 21, 2012
I am fortunate enough to have unlimited interwebs through my DSL ISP, and I occasionally have guests that come by who would like to use it on their mobile devices.My problem is that when my Guest Zone is enabled there is no internet access. Otherwise the Zone functions 'normally' devices within the zone can view each other, but not outside.It is important for me that the Guest Zone doesn't see any of the devices within my Host Zone.
DIR-655 - Rev B 2.03NA
Connection: PPoE
Reconnect mode: On Demand
Wireless Mode: Mixed G/N
View 3 Replies
View Related
Mar 1, 2011
Setup and Hardware D-link DSL-502T Belkin N Wireless Router (No wired connections) Computers on wireless Connections
No.1 Connected to the Belkin & Internet working
No.2 Connected to the belkin & Internet NOT working Tenda W322P Wireless PCI adapter installed OS - XP SP2
When I attempt to connect to the internet on computer No.2 it will not connect.
1. Belkin setup page shows both computers in the DHCP client list
2. Tenda shows connection to the personal network
3. No internet connection icons in the tool bar. There is an internet connection icon on computer No.1 showing two computers and a bubble.
4. No icons in 'Network Connections'
5. In 'My Network Places' there is a Belkin Icon but when properties is clicked it says "This item is not currently on your network".I may have accidentally deleted icons from network connections or some of the associated folders.
View 1 Replies
View Related
May 24, 2011
We have a D-Link DI-524 wireless router that has had no problems until today. Our laptops (with Windows XP), iPods, and iPhones all show that there is an excellent wireless network connection (as usual), but none of the computers or devices will connect to the Internet. I tried resetting, rebooting, and unplugging the modem and router. The router and modem seem to be fine. When we disconnect the router and plug the laptop directly into modem, we have Internet connection (i.e., it's not the IP).
View 4 Replies
View Related
Oct 22, 2009
After I change my router, I recently found out that I cannot access remote network resources after VPN tunnel is established. I use CISCO System VPN client. I can see the connection is successful. I cannot ping server on the remote network
View 2 Replies
View Related
Jan 8, 2013
Region : Spain
Model : TL-WR842ND
Hardware Version : V1
Firmware Version : 3.12.22
ISP :
I am trying to set up a VPN access to the office Windows network by setting the pptp options in the WAN area of the networks settings.
I have entered the public IP address of the office network and also the username and password required by the system. When clicking on the connect button the router attempts to connect but then returns a "disconnected" message.
View 5 Replies
View Related
