i am loaning my laptop to a friend to use while traveling and I have created a "guest user" account so he doesn't have to go through my home pages and personal files. Well, whenever this account is being used, there is no WiFi connection logo and so it cannot be connected to the internet via WiFi...
View 1 Replies
Can use ACS 5.2 as Guest user authentication server?
View 3 Replies View RelatedI have an instance of ISE and NCS with a WLC 2100 plus a couple of LWAPs. This is an evaluation POC lab to sell ISE and NCS to our management to make our life easier.The problem I have amoungst many is I can create a guest user directly on the ISE and the guest can login, the ISE monitor shows the guest authenticates but the clients webpage passes them back to the login page not onto the original client url. The web auth is pointed at the ISE/guestportal/portal.jsp page.If I point the web auth at the internal WLC page using a WLC local user account it works.If I set the guest access to pass through it works without issues getting dhcp and dns. On the ISE is there a policy needed to say if guests are web authenticated give them access? The need is for AD authenticated users to be able tocreate guest users. The AD authentication works for sponsorship and guest creation its just the guest access redirection I am having issues with.
View 1 Replies View Related(WLC 4400) which enables employees to browse to a custom made webpage, where they can create an account for company vistors to access the internet. It's important for the employees not use any login credentials, they arrive on a webpage where they specify the login & password which the vistor will enter to browse the internet. Is there any good link to documention about this topic?
View 3 Replies View RelatedE2000 has the guest account feature. Not sure if all guests shares the same login credentials. I would like to have guests account use seperate logins. Is this feature available? Another thing, I read the manual and it is indicated that only up to 10 maximum guest acccounts is allowed. I am looking for more than 10 - kinda like a hotspot software.
I've been looking everywhere. I've seen hotspot system, ddwrt, chillspot, etc. But it's complicated as firmware needed to be flashed.
Cant we create a guest user login with more than 30 days lifetime? In the lifetime field we can enter maximum 99 but it only allows up to 30
View 5 Replies View RelatedThe design is typical Cisco unified wireless solution. In such a implementation, is the traffic from the guest user who has successfully authenticated via WEB-AUTH encrypted? If so, what is the standard used, AES128 or TKIP?
View 6 Replies View RelatedIn my Wireless network, I have two appliances WLC 5508 running version 7.0.116.0.I have a WCS running version 7.0.172.0, deployed on a windows 2003 server.I've imported the two WLCs in my WCS in order to centralize the monitoring and the configuration tasks.Now I'm facing an issue when I want to create a guest user from the WCS, rather than creating this user access on each WLC. The creation of the user account is working good, the replication is done on the both WLCs, but on one of my WLC the guest user account is deleted after one hour(around).On the second WLC, the same user account remains during all its life time.In attachment a screen shot of the advanced parameter of the guest user.You can see that the user was created on the both WLC but is only active on one ... and unfortunately the wrong because the AP is associated with the other WLC.
View 2 Replies View RelatedI've got a WLC5508 (7.0.116.0) that is managed by WCS (7.0.172.0). I set up another WLC5508 with the same code and managed by the same WCS. Now I'd like to export all the 800 guest user accounts with the passwords from the old WLC and import them into the new WLC.
View 10 Replies View RelatedI am running a guest wireless network on a Cisco 5508 WLC with 6.0.202.0 code. My syslog is filling up with the following error message:
WLC: *May 15 12:32:59.244: %AAA-3-VALIDATE_GUEST_SESSION_FAILED: file_db.c:3968 Guest user session validation failed for guest_user10. Index provided is out of range..
The user that is assigned to the guest_user10 account works fine and has no idea this error is occurring.
This error message is occuring exactly every 15 minutes 24x7.
I believe I have a rogue user who has setup a device to try and login to the guest network automatically, every 15 minutes with the guest_user10 credentials. I need to track this device down. I need a way to find either the MAC or IP address of the device that is causing this error message. I have tried turning on AAA debugging on the controller but I dont get anything more than the above error. I have also tried using WCS to look at the client history but it only show the normal activity.
We have been deploying 3502 APs remotely to locations with full T1s that backhaul to where I sit at HQ. Both the foreign and anchor controller are here at my location.
I am seeking to rate limit per user the bandwidth each client will get on the guest internet ssid. As you know this traffic is encapsulated in capwap between the AP and the controller so I cant use a standard ACL on the switch or router.
We are trying to keep the guest internet access usage in check on the T1 at any given site so the other ssid's & local lan traffic is not overly competing for the bandwidth.
I found the place to edit the default profiles in the controller but the documentation really isnt clear on best practices.
So I put it to you my fellow wireless engineers to suggest how you are implementing bandwidth management on your wireless guest internet.
Oh and here is my hardware & software levels.
5508wlc - forgeign
4402wlc - anchor
Software Version7.0.230.0
When a guest user first trys to access the "guest" WLAN, they are presented with a "certificate page" before the web athentication page / login is presented. The WLC forces an internal redirect to https://1.1.1.1 causing the certificate page to appear. Can this be bypassed? I am runiing 5508 with 7.0.220.0.
View 12 Replies View RelatedI been using my mechanics Wifi connection with my internal wireless adapter for at least 6 months. Living next door he has a guest Wifi connection for his customers that requires a password. I only had to use the password once and since then it has automatically connected. I recently purchased a usb wirless adapter with an antenna to get a better signal and it connects to the server but the login access page will not display nor will it connect to the internet. With this I get error 102.
View 4 Replies View RelatedI have a wired DLink DGL-4100 as my main router and DHCP server. Attached to this, I have a hard-wired Linksys WRT610N which is acting as a dual-band access point. All are on network 192.168.1.0/24.I would like to create a second "guest" wifi network using a spare DLink DIR655 router. Guest clients should have access to Internet but absolutely NO access to machines and resources on the 192.168.1.0/24 network.I connected the DLink DIR655 WAN port to one of the Linksys LAN ports (since it is basically a switch). I configured the DLink DIR655 with LAN IP 192.168.2.1, activated its DHCP to give out 192.168.2.100-105. I set the DLink DIR655 WAN Internet Connection Type as Dynamic IP (DHCP). The DLink DGL4100 assigns an IP to the DIR655 on the WAN side (e.g. 192.168.1.200).With this setup, wireless clients on the DLink DIR655 2.0/24 network get assigned an IP on the 2.0 network. They can access the Internet. However they can still see all the 1.0/24 clients. how come the networks aren't isolated?How should I set this up properly?Do I need to use the DMZ setting on the DLink DGL4100?I know I could get rid of the Linksys and use the Guest Access feature on the DLink DIR655. However I would like to use the Linksys for its dual band feature.
View 4 Replies View RelatedWhen setting up our router for Wifi, we made an account which is locked, but accidentally made one for guests which is not locked. How can we eliminate the guest account?
View 3 Replies View RelatedI have registered here to clarify some things about VLAN's. There are so many (different) names and mentions that i found tat my vision gets blurry looking through all the info.I have a setup at a client where the Guest WiFi access needs to be separated from the normal LAN where all the normal devices are attached to. The guests are not allowed to reach the IP camera's and printer etc. etc. . I am trying to visualize how the traffic should flow but the Tagged, Untagged, PVID, Trunks and other names that i found make it difficult for me to see how it works together.
View 8 Replies View RelatedI am not able to configure the wifi user and password after configure the ssid & passord it is not working according to my requirement
View 1 Replies View RelatedI have the Netgear wndr4500 router setup as an AP. The wndr4500 has a feature for guest wifi but will not connect to the internet. The main wifi will connect to the internet fine. I'm wondering if I use the WNDR4500 as an AP, the guest features do not work?
View 2 Replies View RelatedWe have;
3 - 5508WLC
1 - 4402 WLC
Cisco Prime 1.3
25 - 3502i
We have 25 remote sites that use MPLS back to the company HQ that has one connection to the internet.Also at the HQ we have a seperate ISP connection.The remote sites and HQ have AP's which provide internal company access. We would like to have a seperate Guest WLAN at these remote sites to provide access to the ISP connection at the HQ's. Do we need to have an anchor controller? From documentation I have been reading it looks like anchor controllers are mostly used for networks that have a single connection to the internet and they use the FW to control/ secure the guest and company network from each other. Is there a differnt way of seperating the guest wireless and company wireless network securely from each other but use the same WLC's and AP's??
My router a E4200. the thing is i want to disable the dhcp services from the router, because there are allready a dhcp server in my network. but if i disable the dhcp will the Guest wifi functions still work?
View 3 Replies View RelatedHow do I get guest passwords for wifi access on my android cell?
View 1 Replies View RelatedI have the wireless guest access set up in my E4200 flash to the latest firmware. When I connect to the wireless guest network it comes up under the 192.168.33.xx IP address. I can connect fine but it never pops up the browser so that you can type in the guest password. I'm running Windows 7 but I've also noticed the exact same problem under XP.The only thing I can guess is the problem is that I have this acting like an access point and all DHCP requests go to my router. I've basically turned off DHCP on this and plugged the network connection into the switch on the back.
View 3 Replies View RelatedIs it easy to setup a paid wifi hotspot or would I need knowledge of advanced networking? I've been searching around and I've found software that do that, I prefer doing it free.
View 1 Replies View RelatedI have a DIR-825 (hardware rev B1, v2.06 firmware) with 2 guest networks active (one on each frequency). I recently attached a laptop to the network using the computer's PCI NIC, with the wireless card completely turned off. Much to my surprise, Windows (7 Pro) indicated that I was connected to the 2.4GHz guest network. The only place in the router's configuration where the indicated name appears is in the "Guest zone" configuration page, where it asks for an SSID to use for the "wireless guest zone". Not only that, but it was the only connection that I could get for the computer, unless I turned the wireless card back on. That's also interesting because no other computer on the network, connected via cable, displays any "named" connection when viewing the networking properties. They simply show "Network" as their connection.
View 1 Replies View RelatedCan I set up a guest wifi connection on my Cisco WLC 2504 if I already have WLANs set up inside my corporate network? I want to use port 4 and connect it directly to my ISP so that it is outside of the corporate network. I set up an interface with a valid IP from the ISP and created a "Contractor" WLAN to use that interface.
View 6 Replies View RelatedI have an E1000 router that's been fine until a few weeks ago. I have access but my guests are unalbe to get access. One of my guests looks like she's connected but can't acess the internet.
View 1 Replies View RelatedI have both working in a cluster and traffic is flowing but now I desire to seperate my intranet from internet guest traffic only. Having an issue with understanding how to accomplish this task. I have one 2003 server in the intranet that supports DHCP and using a private network address.
View 4 Replies View RelatedJust installed a refurb EA4500 this past weekend after testing it for a week. The regular wireless network is very stable, but not much faster than my single-band DLink DIR655. Guest network seems to drop out from two connected iPhones, and when the connection drops, you have to re-login and type in the guest password everytime. The linksys firmware is up-to-date( Linksys smart wifi)and so are the iOS on the 2 iPhones. Just to add, on my old DLink, the guest network comes up secured also, so when you type in the passcode, it remembers it next it comes in range unlike the Cisco, which requires login at a web interface.
View 3 Replies View RelatedAny problems with the guest network on the ea4500 with the cloud firmware? I am losing guest clients after about 24 hours and the re-authentication fails. you enter the guest password and nothing happens until you reboot the router.
View 2 Replies View RelatedWe recently switched from Centennial aircard to Verizon aircard (USB760) for our laptop. We have two user accounts on our windows 7 pc. With Centennial we could switch between user accounts without closing sierra wireless manager but when I switch to another user now, a message comes up saying vzaccess manager running in another account and we cannot use the internet until we have shut it down in the account it is running in - which is a pain. I have tried right clicking vzaccess manager in all programs and it does not have a share option. I also went to properties under vzaccess manager and found a setting to share and set it up but it still will not share
View 2 Replies View RelatedI am currently configuring a Cisco 881 router and am having some vpn connection issues:I can connect with one user (me) and all other connection attempts form other users are denied. When I disconnect, other users can connect - the scenario is that only one user can connect at any given time.
Here is my config:
Building configuration...
Current configuration : 11423 bytes
!
! Last configuration change at 13:11:23 PCTime Fri Jul 27 2012 by zephyr1
! NVRAM config last updated at 13:25:30 PCTime Fri Jul 27 2012 by zephyr1
!
version 15.0
[code]....
I just bought a E1000 and connected it to my cable modem. I can connect to the internet with my wired PC and wired Xbox 360 with no problems. For some reason on my wireless laptop I can only connect to the internet by the Guest connection. When I connect to the regular router SSID I get local only access, no internet.
View 2 Replies View RelatedI was wondering if anyone has seen their VPN User Connection Status Table empty even though you know for sure clients are connected? I connect with my iPhone to the PPTP VPN successfully and it works fine but there's no entry for the connection on the VPN User Connection Status Table. Is that normal? Does the router only collect data about Windows clients?
View 3 Replies View Related
