When a guest user first trys to access the "guest" WLAN, they are presented with a "certificate page" before the web athentication page / login is presented. The WLC forces an internal redirect to https://1.1.1.1 causing the certificate page to appear. Can this be bypassed? I am runiing 5508 with 7.0.220.0.
View 12 RepliesI've been asked to create 2 wireless networks for guest access. They are to be used by clients of 2 different companies and they have asked for the website of each company to automatically open as a landing page. e.g.
-WLAN1 - password is companyname1 - landing page = www.companyname1.com
-WLAN2 - password is companyname2 - landing page = www.companyname2.com
Is this possible with our 5508 WLC? I have googled it and can see that you can set a web auth page but I need different landing pages depending on which WLAN is connected to.
I want to setup a webpage for my guest network (no authentication) users. When the client connects to the open guest network and upon opening a browser they would be directed to a survey that I would like them to take, if they don't want to take it they can begin browsing to other sites without issue. How do I do this on a my 5508 WLC?
View 12 Replies View RelatedWhere do you turn this option off? i have looked under security and did not see any thing.
View 1 Replies View RelatedWe are moving forward with a mobility project which requires our network to authenticate/authorize based on certificates.
WLAN_1 has 802.1x enabled passing the cert through to the MS CA which authorizes the cred, which in turn passes the AD creds of the user to the MS RADIUS server for authenticate/authorization.
Hardware: WLC 5508 running 7.2.110.0 3600 APs ACS 5.2 not used for AAA
1. As we turn up additional SSIDs, we need Mobile SSID to accept ONLY the Mobile Cert, our Internet SSID to only accept the Internal Cert and our GUEST SSID to deny ANY Cert issued by our CA.I know ISE makes this much easier, but I dont have it and need this to work as best we can until next fiscal cycle..
I have a 5508 WLC running 6.0.202.0. It functions as the Anchor Controller for the guest network. It sits in our Internet DMZ and is isolated from the rest of the network. It does not connect to AD, ACS, etc. The guest wireless WLAN is configured for Web Policy - Authentication. I have a customized login page. Credential management is done by WCS.
Users are connecting to the guest wireless network and entering their creds with no issues using mobile devices (iPad, etc). Then the mobile device goes to sleep / turns off and when they go to use it again, they have to type their creds in again. They dont like retyping their creds throughout the day.
good way mitigate the multiple logins? Something like a 'save password' option on the customized page?
We're looking at deploying both office extend and also a guest wlan. Both would require a WLC in the DMZ.My question is can one 5508 WLC be both a guest anchor and have office extend APs on it at the same time?
View 2 Replies View RelatedLooking to add time of day restrictions to our Guest WLAN that is currently in its pilot phase.
Is there a way to config time of day access to a WLAN ?
We are planning a WLAN upgrade and the security policy is to forward wireless Guest user traffic to the DMZ controllers. We are now considering the Virtual WLAN Controller and all AP's will register with the virtual controllers and we will use Flexconnect for Staff and internal traffic that will switch their traffic onto the local switch.
We wish to forward the guest traffic to the DMZ Guest Anchor controller which will be a 5508 controller. This will also offer Office Extend AP service.I have looked at teh virtual controller docs and not very clear if this deployment model is supported. Below is a diagram of what we wish to deploy and is this a supported deployment model.
In my Wireless network, I have two appliances WLC 5508 running version 7.0.116.0.I have a WCS running version 7.0.172.0, deployed on a windows 2003 server.I've imported the two WLCs in my WCS in order to centralize the monitoring and the configuration tasks.Now I'm facing an issue when I want to create a guest user from the WCS, rather than creating this user access on each WLC. The creation of the user account is working good, the replication is done on the both WLCs, but on one of my WLC the guest user account is deleted after one hour(around).On the second WLC, the same user account remains during all its life time.In attachment a screen shot of the advanced parameter of the guest user.You can see that the user was created on the both WLC but is only active on one ... and unfortunately the wrong because the AP is associated with the other WLC.
View 2 Replies View RelatedI've got a WLC5508 (7.0.116.0) that is managed by WCS (7.0.172.0). I set up another WLC5508 with the same code and managed by the same WCS. Now I'd like to export all the 800 guest user accounts with the passwords from the old WLC and import them into the new WLC.
View 10 Replies View RelatedStrange issue that our support staff is seeing on our guest WLAN. I have 2 wlans, 1 is production and authenticates our Domain controllers, this is working fine. The other is a wlan that has restricted access internally, I allow http, https and VPN access out only.
It appears that on the guest wlan, after random amount of time an established VPN connection using Cisco VPN client disconnects. Wireless connectivity doesnt appear to go down, just the vpn connection.
On this guest wlan, I have configured QOS bronze and I read a link where this may be affecting the UDP conversation between VPN client and end point.
We are implementing a new corporate headquarters and have bought a Cisco 5508. I have two connections plugged into the 5508 in ports 1 and port 2. Port 1 is for all internally wireless networks and connects to our core 6500 and use an external DHCP server scopes. Port 2 is for our guest WLAN and connects directly to a public network switch in front of (outside) the firewall. For the guest network, I have setup a vlan on the controller for dhcp and the interface setup to that vlan and dhcp scope built on the controller. how or can I NAT the internally addressing for the guest network to the public IP address on the controller. Essentially I want to drop of guest network traffic outside the firewall and not have to deal with setting up the firewall for any aspect of guest network traffic.
View 1 Replies View RelatedI am running a guest wireless network on a Cisco 5508 WLC with 6.0.202.0 code. My syslog is filling up with the following error message:
WLC: *May 15 12:32:59.244: %AAA-3-VALIDATE_GUEST_SESSION_FAILED: file_db.c:3968 Guest user session validation failed for guest_user10. Index provided is out of range..
The user that is assigned to the guest_user10 account works fine and has no idea this error is occurring.
This error message is occuring exactly every 15 minutes 24x7.
I believe I have a rogue user who has setup a device to try and login to the guest network automatically, every 15 minutes with the guest_user10 credentials. I need to track this device down. I need a way to find either the MAC or IP address of the device that is causing this error message. I have tried turning on AAA debugging on the controller but I dont get anything more than the above error. I have also tried using WCS to look at the client history but it only show the normal activity.
I would like to setup a 2504 to have one Guest WLAN and one Staff WLAN with a controller port for each WLAN connected to different devices.
I would prefer to connect the WLC Guest port to an ASA 5510 and the WLC Staff port to an internal 2960S switch. Will this work? I haven't setup a 2500 series controller previously.
I have been asked by a client to restrict access to a number of non work related sites. Easy, blocked them using Firewall> Content Filter. Then I was asked to disable this filter for one user (the Managing Director) so he can access eBay.
I am familiar with doing this on a Netgear device, but so far my efforts with the RV082 have failed.
First I have tried using DHCP to reserve an IP address for this user, then setting 'Access Rules' so that this IP has all access all the time, but this does not appear to work.
I assume setting this IP as the DMZ would achieve what I want but it seems like overkill and not very security wise.
Been tinkering around in our ACS 5.2 appliances today to setup PEAP. I generated a self signed certificate under local certificates which I want to remove now. But when I try to delete it I get the following message:
This System Failure occurred: Certificate is associated with a protocol. Hence it cannot be deleted.. Your changes have not been save. Click OK to return to the list page.
I assume this is because it is associated with the EAP protocol, but I cannot uncheck the box when I edit the local certificate. How can I get rid of this test certificate?
I have a cisco wlc 2504 is deploying authentication services to guest users toward a portal web customized and configured. I need to install my certificate verisign (certificate.cer) in to cisco wlc because my users don't like the page no trusted (The wlc is showing me ''There is a problem with this website's security certificate'') when they are trying to access to ssid to users guests.
View 2 Replies View RelatedI been using my mechanics Wifi connection with my internal wireless adapter for at least 6 months. Living next door he has a guest Wifi connection for his customers that requires a password. I only had to use the password once and since then it has automatically connected. I recently purchased a usb wirless adapter with an antenna to get a better signal and it connects to the server but the login access page will not display nor will it connect to the internet. With this I get error 102.
View 4 Replies View Related1 router 881w with a site-to-site VPN connected to a switch and a wireless which allows internal users to access the VPN via wireless (this is like a backup, if the switch fails, then they can use the wireless). Everything's working fine so far. Now I want to configure a second WLAN for guest but I'm not really sure if this configuration will work:
ROUTER:
ip dhcp excluded-address 192.168.100.1 192.168.100.200
!
ip dhcp pool GuestNetwork
network 192.168.100.0 255.255.255.0
default-router 192.168.100.1
dns-server 8.8.8.8
[code]....
If it's not clear I want that everyone that is connected to the guest WIFI receives an IP address from the range I wrote before and then goes directly to the internet.
To enable our receptionits to print a guest user ticket on a small A8 ticket printer I'm looking for a way to adjust the layout and formatting of the guest account credentials page.
I have searched through the javascript and css files but with no success.
We are using WCS 7.0.172.0
Can I limit bandwith for guest in a wlan network with out Wlan controller? and of course, how can I do it?P.S.: I heard something about bronze profile in a wlan controller envoiroment, I need something like that but in an independent AP.
View 3 Replies View RelatedWe have a strange problem. We have a WCS v.7.0.172 that controls our two WLC v.7.0.116 and we have also two "Anchor Controller" WLC
v.7.0.116 for Guest Access.
We use the LAP1142N and every AP has two SSID's. One for internal data traffic and the other one for the guests.
Now the problem is, that even if we have internal and external user on the same AP, the guest users gets disconnected after a few time. Sometimes after 20 minutes, sometimes after 90 minutes...but the user is still working. It's really irregular.
Have WLC 5508 running 7.4 code; have wlan setup to allow access to internal network. Users on ipads should be able to connect to this wlan and authenticated via certificate instead of PSK. We have setup laptops that are part of domain to use internal CA for authentication to WLAN. Ipads are not part of domain so we are not able to use the same model, or can we use the same model for authentication?How to setup WLC to authenticate ipad users via certificate instead of PSK while connecting to the WLAN?
View 1 Replies View Relatedget a installed certificate work on a 5508 WLC Controller without rebooting. Is there a way? Is it possible to just reload a process to get the certificate work?
View 1 Replies View RelatedI am using webauth and need to install a SSL cert to prevent the "There is a problem with this website's security certificate" message. I have a Wildcard cert that was issued by Network Solutions that I use on a couple web servers I run, and want to know if I can use that for the WLC? It's a pks cert and I think the WLC needs to use a pem cert, so I converted the wildcard to pem. Or do I need to purchase a cert that is not a wildcard and is in pem format?
View 7 Replies View RelatedI have just setup a vWLC for lab purposes and it´s up and running. I have a few used 1131 LAP:s that tries to join the AP but I just get DTLS certificate errors like these:
*Sep 14 13:25:27.229: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
*Sep 14 13:25:27.258: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
*Sep 14 13:25:36.198: %CAPWAP-3-ERRORLOG: Go join a capwap controller
*Sep 14 13:26:41.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 192.168.1.105 (code)
These AP:s (I have tried 2 so far) have earlier been in use connected to a cluster of 5508:s.
Is it possible to change the look of welcome page (guest login) to change so that it is personal. Of course it would be great if the guests have to log on your personal page.On this page you would be able to indicate the rules and and limitations. It would also be a good option for certain that your guests a limited time duration for the connection and gives max download. This would also be found to be in a log.
View 2 Replies View RelatedI recently setup a 2504 WLC that has two primary WLANs (internal and guest) which get their IP addresses from a central DHCP server using the local router's broadcast forwarding. Things seem to be working well for the internal wlan, but clients on the guest wlan don't seem to be getting IP addresses. If I give the client a static IP they are able to communicate across the wlan okay.
It is worth noting that I am using LAG between the controller and router and this guest wlan is really just a regular wlan (with PSK) that has an access-list applied to force it to the internet only. The access-list should be allowing dhcp requests through, but in any case, I removed the access-list and it made no difference.
Here is a debug client for a machine connected to the guest vlan (vlan 33). The internal wlan is on the 10.10.10.0/24 network (same as wired and same that the AP's are connected to) and the guest wlan is 10.33.0.0/16. I don't understand why I am seeing the dhcp request come from the internal vlan/ wlan first and it gets an IP address on this network. I then see a request on the guest wlan/vlan at which point it appears to get a valid IP address on the guest network (10.33.0.0), but the client never sees this. [code]
I have a strange situation on my guest wireless LAN.The guest WLAN is configured as an SSID "GUEST" on Cisco 1142 lightweight APs, with WiSM controller and WLC software version 7.0.230.0.
For simple Internet access using this SSID, we have a web policy, which causes a web page to be displayed when the user opens his/her browser, and on this web page, the user must click on an "Accept" button in order to accept the terms and conditions of use. Once the user accepts, the browser will then go to the web site which the user wishes to open. When using this mode of access, everything is fine.
However, there is also a pre-authentication ACL, which allows certain types of VPN traffic to reach the Internet without the user being required to accept terms and conditions. The ACL allows ESP, IKE (UDP/500), IKE over UDP (UDP/4500), DNS, HTTPS/SSL (TCP/443), DHCP client and server (UDP/67,68).The pre-auth ACL actually works as intended; and the ACL traffic is NOT allowed when the ACL is removed. This is exactly as it should be.
However, when using, for example, a VPN client such as the Cisco VPN client, or the Cisco AnyConnect client, via this guest SSID without user acceptance, the WLAN regularly and predictably stops passing traffic. This is 100% repeatable and predictable; it happens every 300 seconds, or possibly slightly longer. I have only used my PC clock to time it so the timing isn't all that accurate but I'm sure it's within a few seconds.
Given that the problem happens at the same time interval and is constant, I guessed there must be some configuration item which needs to be altered, but I've looked extensively at the controller GUI (we actually use WCS here) and I can't see anything that looks even remotely related to this.
My customer has multiple sites, each with a 2504 WLC.A data center with a 5508 in the DMZ acting as Anchor for the remote sites.ACS 5.x and NCS Prime.All guest users will egress to the internet via a Vlan in the DMZ.Authentication is currently web-auth on the Anchor, but will move to NCS once that is fully deployed.
Is it possible to put a printer in each site for Guest WLAN users to use?
I tried to extend the Range of the Guest WLAN of the E2000 with several different Access Points vom TP-Link. (Last try: TL-WA901D) The Access Point recognises the WLAN and sometimes it has a connection for a short time. But then the whole WLAN is breaking down, sometimes the Router E200 hangs up, also with the LAN connections. The E200 is connected to a sky-DSL Router and works fine when no additional access point is connected. In the web-Interface of the E2000 I cant setup any specific Guest-WLAN settings.
View 1 Replies View RelatedI am planning to migrate from an old 4400 to a new 5508. I am happy with migrating the access points but I need to know if I can migrate the web authentication certificate used for guests.The new WLC will have the same virtual interface and DNS name to match the CN on the current certificate. Will this work or will I need a new certificate?
View 2 Replies View Related