Cisco Wireless :: 5508 Setting Up Guest WLAN With Landing Page

Aug 1, 2012

I've been asked to create 2 wireless networks for guest access. They are to be used by clients of 2 different companies and they have asked for the website of each company to automatically open as a landing page. e.g.

-WLAN1 - password is companyname1 - landing page = www.companyname1.com
-WLAN2 - password is companyname2 - landing page = www.companyname2.com

Is this possible with our 5508 WLC? I have googled it and can see that you can set a web auth page but I need different landing pages depending on which WLAN is connected to.

View 11 Replies


ADVERTISEMENT

Cisco Wireless :: Guest WLAN Splash Page To External URL 5508

Feb 10, 2013

I want to setup a webpage for my guest network (no authentication) users. When the client connects to the open guest network and upon opening a browser they would be directed to a survey that I would like them to take, if they don't want to take it they can begin browsing to other sites without issue. How do I do this on a my 5508 WLC?

View 12 Replies View Related

Cisco Wireless :: WLC 5508 With IPad / IPod And IPhone - Landing Page Not Appear

Mar 5, 2013

We have a centralized WLC with some branch office with AP's in Flexconnect Mode. The Wlans are configured to use Web Authentication (Landing Page). The Landing Page is Cisco Default.
 
We're experiencing some problem with Apple Devices, on some the Landing Page apperars on some not. The WLC Software is about 1 year old. On a XP machine the landing page doesn't appear too, but you can type in the address manually and it works.
 
Whats the best solution to include the Apple Devices successfully in the WLC Wireless World.

View 9 Replies View Related

Cisco Wireless :: 5508 - Bypass / Remove Certificate Page For Guest User WLAN

Jul 24, 2012

When a guest user first trys to access the "guest" WLAN, they are presented with a "certificate page" before the web athentication page / login  is presented.  The WLC forces an internal redirect to https://1.1.1.1 causing the certificate page to appear.  Can this be bypassed?    I am runiing 5508 with   7.0.220.0. 

View 12 Replies View Related

Cisco Wireless :: Wlc 5508 Guest Logon Page?

Jun 5, 2012

Where do you turn this option off? i have looked under security and did not see any thing. 

View 1 Replies View Related

Cisco :: 5508 WLC / Guest Wireless - Redirect Page - Username / Password

Feb 19, 2012

I have a 5508 WLC running 6.0.202.0. It functions as the Anchor Controller for the guest network. It sits in our Internet DMZ and is isolated from the rest of the network. It does not connect to AD, ACS, etc. The guest wireless WLAN is configured for Web Policy - Authentication. I have a customized login page. Credential management is done by WCS.
 
Users are connecting to the guest wireless network and entering their creds with no issues using mobile devices (iPad, etc). Then the mobile device goes to sleep / turns off and when they go to use it again, they have to type their creds in again. They dont like retyping their creds throughout the day.
 
good way mitigate the multiple logins? Something like a 'save password' option on the customized page?

View 5 Replies View Related

Cisco Wireless :: 5508 Office Extend And Guest WLAN Setup

Aug 28, 2011

We're looking at deploying both office extend and also a guest wlan. Both would require a WLC in the DMZ.My question is can one 5508 WLC be both a guest anchor and have office extend APs on it at the same time?

View 2 Replies View Related

Cisco :: Wireless 5508 Controller - Guest Wlan Time Of Day Restrictions?

Oct 2, 2011

Looking to add time of day restrictions to our Guest WLAN that is currently in its pilot phase.
 
Is there a way to config time of day access to a WLAN ?

View 7 Replies View Related

Cisco Wireless :: 5508 / Virtual WLAN Controller Guest Anchor?

Dec 6, 2012

We are planning a WLAN upgrade and the security policy is to forward wireless Guest user traffic to the DMZ controllers. We are now considering the Virtual WLAN Controller and all AP's will register with the virtual controllers and we will use Flexconnect for Staff and internal traffic that will switch their traffic onto the local switch.
 
We wish to forward the guest traffic to the DMZ Guest Anchor controller which will be a 5508 controller. This will also offer Office Extend AP service.I have looked at teh virtual controller docs and not very clear if this deployment model is supported. Below is a diagram of what we wish to deploy and is this a supported deployment model.

View 2 Replies View Related

Cisco Wireless :: 5508 - Setting Client Count Per WLAN And AP Radio

Mar 14, 2013

We use WLC 5508 with 7.4. We tried to set max allowed clients per AP radio to 30 through GUI. We have APs with 80 clients associeted though.
 
When entering config wlan max-associated-clients max-clients wlan-id we got 
 
"WLAN/Guest-Lan/remote-lan is enabled. disable to configure max associated clients."
 
GUI doesn't show that message, should it?  In GUI, Is it necesary to disable WLAN before too?

View 3 Replies View Related

Cisco :: 5508 WLC - VPN Disconnects From Wlan Guest

Feb 14, 2012

Strange issue that our support staff is seeing on our guest WLAN. I have 2 wlans, 1 is production and authenticates our Domain controllers, this is working fine. The other is a wlan that has restricted access internally, I allow http, https and VPN access out only.
 
It appears that on the guest wlan, after random amount of time an established VPN connection using Cisco VPN client disconnects. Wireless connectivity doesnt appear to go down, just the vpn connection.
 
On this guest wlan, I have configured QOS bronze and I read a link where this may be affecting the UDP conversation between VPN client and end point.

View 10 Replies View Related

Cisco :: 5508 Guest WLAN Dropped Off Outside Firewall

Sep 5, 2012

We are implementing a new corporate headquarters and have bought a Cisco 5508.  I have two connections plugged into the 5508 in ports 1 and port 2.  Port 1 is for all internally wireless networks and connects to our core 6500 and use an external DHCP server scopes.  Port 2 is for our guest WLAN and connects directly to a public network switch in front of (outside) the firewall.  For the guest network, I have setup a vlan on the controller for dhcp and the interface setup to that vlan and dhcp scope built on the controller. how or can I NAT the internally addressing for the guest network to  the public IP address on the controller.  Essentially I want to drop of guest network traffic outside the firewall and not have to deal with setting up the firewall for any aspect of guest network traffic. 

View 1 Replies View Related

Cisco Wireless :: Setup A 2504 To Have One Guest WLAN And One Staff WLAN?

Jun 10, 2013

I would like to setup a 2504 to have one Guest WLAN and one Staff WLAN with a controller port for each WLAN connected to different devices.
 
I would prefer to connect the WLC Guest port to an ASA 5510 and the WLC Staff port to an internal 2960S switch. Will this work? I haven't setup a 2500 series controller previously.

View 4 Replies View Related

Wireless :: No Wifi Log In Guest Access Page?

Apr 7, 2012

I been using my mechanics Wifi connection with my internal wireless adapter for at least 6 months. Living next door he has a guest Wifi connection for his customers that requires a password. I only had to use the password once and since then it has automatically connected. I recently purchased a usb wirless adapter with an antenna to get a better signal and it connects to the server but the login access page will not display nor will it connect to the internet. With this I get error 102.

View 4 Replies View Related

Cisco Wireless :: 881w / Configure A Second WLAN For Guest?

Mar 30, 2013

1 router 881w with a site-to-site VPN connected to a switch and a wireless which allows internal users to access the VPN via wireless (this is like a backup, if the switch fails, then they can use the wireless). Everything's working fine so far. Now I want to configure a second WLAN for guest but I'm not really sure if this configuration will work:
 
ROUTER:
 
ip dhcp excluded-address 192.168.100.1 192.168.100.200
!
ip dhcp pool GuestNetwork
network 192.168.100.0 255.255.255.0
default-router 192.168.100.1
dns-server 8.8.8.8

[code]....
 
If it's not clear I want that everyone that is connected to the guest WIFI receives an IP address from the range I wrote before and then goes directly to the internet.

View 11 Replies View Related

Cisco Wireless :: WCS 7.0.172.0 - Adjusting The Guest Account Credentials Page

Jul 4, 2011

To enable our receptionits to print a guest user ticket on a small A8 ticket printer I'm looking for a way to adjust the layout and formatting of the guest account credentials page.
 
I have searched through the javascript and css files but with no success.
 
We are using WCS 7.0.172.0

View 3 Replies View Related

Cisco Wireless :: Limiting Bandwidth For Guest WLAN In AP1300?

Nov 3, 2011

Can I limit bandwith for guest in a wlan network with out Wlan controller? and of course, how can I do it?P.S.: I heard something about bronze profile in a wlan controller envoiroment, I need something like that but in an independent AP.

View 3 Replies View Related

Cisco Wireless :: LAP1142N / WCS V.7.0.172 - Disconnects From WLAN Guest Access

Feb 7, 2012

We have a strange problem. We have a WCS v.7.0.172 that controls our two WLC v.7.0.116 and we have also two "Anchor Controller" WLC
v.7.0.116 for Guest Access.
 
We use the LAP1142N and every AP has two SSID's. One for internal data traffic and the other one for the guests.
 
Now the problem is, that even if we have internal and external user on the same AP, the guest users gets disconnected after a few time. Sometimes after 20 minutes, sometimes after 90 minutes...but the user is still working. It's really irregular.

View 2 Replies View Related

Linksys Wireless Router :: Changing Look Of Welcome Page (guest Login)

Feb 9, 2013

Is it possible to change the look of welcome page (guest login) to change so that it is personal. Of course it would be great if the guests have to log on your personal page.On this page you would be able to indicate the rules and  and limitations. It would also be a good option for certain that your guests a limited time duration for the connection and gives max download. This would also be found to be in a log.

View 2 Replies View Related

Cisco Wireless :: 2504 Client Unable To Get IP Address On Guest Wlan

Feb 23, 2013

I recently setup a 2504 WLC that has two primary WLANs (internal and guest) which get their IP addresses from a central DHCP server using the local router's broadcast forwarding.  Things seem to be working well for the internal wlan, but clients on the guest wlan don't seem to be getting IP addresses.  If I give the client a static IP they are able to communicate across the wlan okay.
 
It is worth noting that I am using LAG between the controller and router and this guest wlan is really just a regular wlan (with PSK) that has an access-list applied to force it to the internet only.  The access-list should be allowing dhcp requests through, but in any case, I removed the access-list and it made no difference.
 
Here is a debug client for a machine connected to the guest vlan (vlan 33).  The internal wlan is on the 10.10.10.0/24 network (same as wired and same that the AP's are connected to) and the guest wlan is 10.33.0.0/16. I don't understand why I am seeing the dhcp request come from the internal vlan/ wlan first and it gets an IP address on this network.  I then see a request on the guest wlan/vlan at which point it appears to get a valid IP address on the guest network (10.33.0.0), but the client never sees this.   [code]

View 4 Replies View Related

Cisco Wireless :: 1142 Disconnects Every 5 Minutes On Guest WLAN With Re-authentication

Jul 18, 2012

I have a strange situation on my guest wireless LAN.The guest WLAN is configured as an SSID "GUEST" on Cisco 1142 lightweight APs, with WiSM controller and WLC software version 7.0.230.0.
 
For simple Internet access using this SSID, we have a web policy, which causes a web page to be displayed when the user opens his/her browser, and on this web page, the user must click on an "Accept" button in order to accept the terms and conditions of use. Once the user accepts, the browser will then go to the web site which the user wishes to open. When using this mode of access, everything is fine.
 
However, there is also a pre-authentication ACL, which allows certain types of VPN traffic to reach the Internet without the user being required to accept terms and conditions. The ACL allows ESP, IKE (UDP/500), IKE over UDP (UDP/4500), DNS, HTTPS/SSL (TCP/443), DHCP client and server (UDP/67,68).The pre-auth ACL actually works as intended; and the ACL traffic is NOT allowed when the ACL is removed. This is exactly as it should be.
 
However, when using, for example, a VPN client such as the Cisco VPN client, or the Cisco AnyConnect client, via this guest SSID without user acceptance, the WLAN regularly and predictably stops passing traffic. This is 100% repeatable and predictable; it happens every 300 seconds, or possibly slightly longer. I have only used my PC clock to time it so the timing isn't all that accurate but I'm sure it's within a few seconds.
 
Given that the problem happens at the same time interval and is constant, I guessed there must be some configuration item which needs to be altered, but I've looked extensively at the controller GUI (we actually use WCS here) and I can't see anything that looks even remotely related to this.

View 5 Replies View Related

Cisco Wireless :: 2504 Printing Solution For Guest WLAN Users?

Sep 19, 2012

My customer has multiple sites, each with a 2504 WLC.A data center with a 5508 in the DMZ acting as Anchor for the remote sites.ACS 5.x and NCS Prime.All guest users will egress to the internet via a Vlan in the DMZ.Authentication is currently web-auth on the Anchor, but will move to NCS once that is fully deployed.
 
Is it possible to put a printer in each site for Guest WLAN users to use?

View 3 Replies View Related

Linksys Wireless Router :: E2000 With Extended Guest-WLAN

Jul 16, 2011

I tried to extend the Range of the Guest WLAN of the E2000 with several different Access Points vom TP-Link. (Last try: TL-WA901D) The Access Point recognises the WLAN and sometimes it has a connection for a short time. But then the whole WLAN is breaking down, sometimes the Router E200 hangs up, also with the LAN connections. The E200 is connected to a sky-DSL Router and works fine when no additional access point is connected. In the web-Interface of the E2000 I cant setup any specific Guest-WLAN settings.

View 1 Replies View Related

Linksys Wireless Router :: E4200 Will Not Open Guest Login Page?

Jun 11, 2011

When Im connected to the GUEST network and open the web-browser it will not open the Linksys guest-login page. Why?(latest firmware ver.1.0.01(Build10) installed)

View 9 Replies View Related

Linksys Wireless Router :: WRT54g - WLAN Clients / Guest Network?

Feb 8, 2012

I have a wrt54g router and would like to separate the WLAN clients from accessing computers and servers on the LAN... in other words I would like to make it a "guest" network. I've put the router in "router" mode instead of "gateway". I just want to be sure if that is the best thing I can do in terms of turning the wireless network into an isolated one. 

View 4 Replies View Related

Cisco Wireless :: WLC 5500 Clients Get DHCP Address / Page Is Not Redirecting To Guest Portal

Oct 30, 2012

with our WLC 5500 controller, once the clients get the DHCP address the page is not redirecting them to the guest portal.What is the best way to check as to why the redirection is failing.

View 8 Replies View Related

Linksys Wireless Router :: E4200 Guest SSID Login Page Fails?

Jan 25, 2011

Config:

Netgear ProSafe Gigabit Router is my DHCP Server -- The entire home net work is on the same subnet (192.168.15.xxx)
Linksys E4200 configured as an access point ONLY -- wired connection -- static IP assigned -- DHCP server turned off
Linksys WRT610N configured as an access point ONLY  -- wired connection -- static IP assigned -- DHCP server turned off

3 -- 5 port gigabit switches
1 -- 8 port gigabit switch

No more than two switches between any two wired devices Both Linksys access points have the same SSID and WPA2 security phrase -- total of 4 radios Nonoverlapping channels are selected on both the 2.4Ghz and 5.0Ghz radio to minimize interference All computers are running Windows 7 Professional 64bit with all the latest updates Two iPhones and one iPad also access the network All LAN and WAN connectivity is working as designed? 

Problem: 

guest SSID is turned on

password is established 

All devices will connect to the guest SSID and the E4200 is assigning an ip address to the device in the 192.168.33.xxx range which is what it's supposed to do.When I open a web browser, I am not automatically redirected to the Cisco Login Page. If I enter 192.168.33.1 as the URL, the login screen is presented. I enter the password I have created in the guest admin page on the wireless guest tab.  I then see a blank page and a URL of 192.168.33.1/guestnetwork.asp. THIS IS WHERE I GET STUCK. THE ONLY WAY TO EVER SEE THE LOGIN PAGE AGAIN IS TO REBOOT THE E4200, otherwise you just get unable to connect messages when opening web browsers and the wireless status icon in the system tray shows a yellow exclamation mark.

I successfully connect to the guest SSID but I do not get access to the internet. When I type ipconfig, I see that the DNS is set to 192.168.33.1 which does not exist on my network. I assume there's some internal NAT magic that is supposed to happen in the E4200 to bridge me over to my 192.168.15.xxx network but it doesn't seem to be happening.At the beginning of the call I specifically asked them if the E4200 must be the DHCP server in order for the guest SSID feature to work and they said no. 1.5 hours later they had no answers so they told me that it wasn't working because the E4200 was not the DHCP server. The documentation says nothing about a DHCP requirement for guest AP service. Linksys support further could not answer what you would do if you needed more than one AP with guest service enabled.It seems like this is a firmware issue but it may be the guest SSID service requires the E4200 to also act as the DHCP server. Whether this is a bug or if the router/AP is working as designed?

View 9 Replies View Related

Linksys Wireless Router :: E3000 Sometimes Don’t Show The Login Page For Guest

Aug 11, 2011

I have an E3000 with firmware version 1.0.04 with WiFi configured as:Guest5GHz (only N)2.4 GHz (only G)I use the guest network access for my guests or my neighbor.Usually they connect and the first page they see in the browser is the http://192.168.33.1/login.asp were they put the password. Some times shomething don’t work and the browser don’t show the page, so the people can’t use the connection because they get a timeout error.The only solution I have in this case is to resart the router, but sometimes is not enough and I have to fisically shotdown and restart it.The login.asp page starts with: This is UNPUBLISHED PROPRIETARY SOURCE CODE of CyberTAN Inc. the contents of this file may not be disclosed to third parties, copied or duplicated in any form without the prior written permission of CyberTAN Inc. This software should be used as a reference only, and it not intended for production use! What about a firmware update to fix it and give the control from the web administration over the guest network?

View 5 Replies View Related

Cisco Wireless :: Setting Up Guest Connection On AP-541N?

Jan 28, 2011

I have both working in a cluster and traffic is flowing but now I desire to seperate my intranet from internet guest traffic only. Having an issue with understanding how to accomplish this task. I have one 2003 server in the intranet that supports DHCP and using a private network address.

View 4 Replies View Related

Cisco Wireless :: 5508 WLC - Cannot Use Logout Page Customized On NAC

May 21, 2013

I have the following systems in place:

5508 WLC - 7.4.100.00
NAC Guest Server - 2.1.0

I have setup an SSID with external Webauth, which is pointing to the login page on the NAC.All works fine but I cannot use the logout page which is customized on the NAC. I always get the internal default logout.html of the WLC and I cannot customize that.Every customization which I have done to the logout.html (then uploaded it on the WLC) will not be recognized.Is there a way to customize that logout.html?

View 1 Replies View Related

Cisco :: Prevent Guest From Doing Peer-peer Communication On Guest 5508 Controllers

Jan 24, 2013

I want to prevent guest from doing peer - peer communication on my Guest (5508) controllers.  Is this a feature on the WLC or only by applying an ACL on the router interface?

View 2 Replies View Related

Cisco Wireless :: WLC 5508 Wlan Stability Is Not Enough For Clients

Nov 8, 2012

I have a WLC 5508 with half a dozen LAPs (AIR-CAP3502I-E-K9).They have been working but sometimes clients detect conectivity problems with the wlan.Here is the message log I can obtain from the controller:

View 1 Replies View Related

Cisco Wireless :: 5508 NCS WLAN Template Error

Aug 8, 2012

I am trying to apply WLAN template from NCS to two WLCs 5508 and I receive this message."Another WLAN with same SSID and either WPA1/ WPA2/ WPA1+WPA2 is enabled. Please change the Layer 2 security policy."The template has layer 2 security with WPA+WPA2 enable and 802.1x.I have other WLAN template with other name and other SSID with the same security policies with no problem to apply.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved