Cisco Wireless :: WLC 2504 - Guest User Life Time?
Sep 19, 2012Cant we create a guest user login with more than 30 days lifetime? In the lifetime field we can enter maximum 99 but it only allows up to 30
View 5 Replies
ADVERTISEMENT
Cisco Wireless :: Set Up Guest Wi-Fi Connection On WLC 2504?
Nov 28, 2012Can I set up a guest wifi connection on my Cisco WLC 2504 if I already have WLANs set up inside my corporate network? I want to use port 4 and connect it directly to my ISP so that it is outside of the corporate network. I set up an interface with a valid IP from the ISP and created a "Contractor" WLAN to use that interface.
View 6 Replies View RelatedCisco Wireless :: WLC 2504 - Setup Guest Wi-Fi On Controller?
Jun 4, 2012I have setup guest access on the controller and this is not working at the moment.
DHCP server setup on the controller for the Guest users.
You are able to connect (get ip address from controller) and the browser gets redirected to 1.1.1.1 but then page can not be displayed instead of the login page.
Cisco Wireless :: 2504 - Guest Network Completely Isolated From LAN
Jan 28, 2013I recently got my Cisco wireless system working a few days ago and am back with a guest network. Our wireless system includes one 2504 controller and 2 2602i access points. So, I want a wireless guest network completely isolated from the LAN.
Here is what I have done.
I have created a new internal network and assigned 192.168.2.1 to an unused port on the firewall and 2.2 to a new controller interface with vlan 10. I can ping both 2.1 and 2.2 from the firewall and the controller. Basic network connectivity is working. The DHCP server is setup on this same firewall and configured only for this port. This address is referenced in the controllers interface.
A new w lan was setup and enabled. The proper interface group was selected on the w lan. I have left the default layer2 security.
As far as AAA servers tab in this wlan, this is where I am a little confused. I wish to just have a single log in for this guest network. I wasn't sure what to do so I went over to the Security tab and created a "local net users" account. I do not know how to reference the use of this under wlan, security, aaa servers. Should I check the box that says "local eap authentication"?? If so, I don't have a profile name in the drop down. What I'm looking for is the username/password to be stored locally on the controller itself since there will be only 1 account.
Under wlan, advanced tab, I do not have "Allow AAA override" checked. Should I?
Lastly, when I try to connect the client, it is not pulling a dhcp address. I wasn't sure if authentication was required before dhcp or the other way around so I'm not sure what to trouble shoot first, authentication or dhcp.
Cisco Wireless :: Configuring Guest Access Using 2 LWAPs And 2504 WLC?
Apr 3, 2012I have 2 APs, Cisco Aironet 1040, and 2504 WLC.Is it possible to configure guest access (Guest SSID/VLAN and Corporative SSID/VLAN) without dedicated guest WLC in DMZ?
View 4 Replies View RelatedCisco Wireless :: WLC 2504 With Certificate Version To Guest Users
May 7, 2013I have a cisco wlc 2504 is deploying authentication services to guest users toward a portal web customized and configured. I need to install my certificate verisign (certificate.cer) in to cisco wlc because my users don't like the page no trusted (The wlc is showing me ''There is a problem with this website's security certificate'') when they are trying to access to ssid to users guests.
View 2 Replies View RelatedCisco Wireless :: WLC 2504 - Setup Guest Access On The Controller
Jun 4, 2012I have setup guest access on the controller and this is not working at the moment. DHCP server setup on the controller for the Guest users. You are able to connect (get ip address from controller) and the browser gets redirected to 1.1.1.1 but then page can not be displayed instead of the login page.
View 10 Replies View RelatedCisco Wireless :: 2504 - User Not Getting DHCP IP Address?
Aug 25, 2012i have configured wlc 2504 .in that i have configured two interfaces.one is guest, 2nd is internal user, the pblm when user try to connect with that contain ssid user not getting ip address,
i have connected only one link between core to wlc on port 1.for guest interface i used port 4.but no physical link.
Cisco Wireless :: 2504 Client Unable To Get IP Address On Guest Wlan
Feb 23, 2013I recently setup a 2504 WLC that has two primary WLANs (internal and guest) which get their IP addresses from a central DHCP server using the local router's broadcast forwarding. Things seem to be working well for the internal wlan, but clients on the guest wlan don't seem to be getting IP addresses. If I give the client a static IP they are able to communicate across the wlan okay.
It is worth noting that I am using LAG between the controller and router and this guest wlan is really just a regular wlan (with PSK) that has an access-list applied to force it to the internet only. The access-list should be allowing dhcp requests through, but in any case, I removed the access-list and it made no difference.
Here is a debug client for a machine connected to the guest vlan (vlan 33). The internal wlan is on the 10.10.10.0/24 network (same as wired and same that the AP's are connected to) and the guest wlan is 10.33.0.0/16. I don't understand why I am seeing the dhcp request come from the internal vlan/ wlan first and it gets an IP address on this network. I then see a request on the guest wlan/vlan at which point it appears to get a valid IP address on the guest network (10.33.0.0), but the client never sees this. [code]
Cisco Wireless :: 2504 - Creating Web Portal For Some SSID (Guest And Staff)
Jan 17, 2013My customer need creates some separately web portal for some SSID (Guest and Staff), 01 web portal for Guest and 01 Web portal for Staff. Can WLC2504 can support this features ?
View 2 Replies View RelatedCisco Wireless :: 2504 Printing Solution For Guest WLAN Users?
Sep 19, 2012My customer has multiple sites, each with a 2504 WLC.A data center with a 5508 in the DMZ acting as Anchor for the remote sites.ACS 5.x and NCS Prime.All guest users will egress to the internet via a Vlan in the DMZ.Authentication is currently web-auth on the Anchor, but will move to NCS once that is fully deployed.
Is it possible to put a printer in each site for Guest WLAN users to use?
Cisco Wireless :: SSID / VLANs For Guest / Staff With 3600 And 2504 Controller?
May 2, 2012We are deploying 3600 AP's with a 2504 and would like to create multiple SSID's that are mapped to unique VLANs so we can control the traffic at the Firewall. We have the 2504 up and running with AP's but there appears to be no where in the 2504 controller Web GUI to configure a VLAN mapping to an SSID. Any pointers to documentation on how to configure?
View 1 Replies View RelatedCisco Wireless :: Configure A Wired Guest Network With A Combination Of 5508 And 2504 Wireless Controllers?
Apr 7, 2013Is there any way to configure a wired guest network with a combination of 5508 and 2504 wireless controllers? I am aware that the 2504 does not have wired guest functionality, however is it possible to set up a wired guest on the 5508 and using mobility anchors, transmit the l2 information through eoip to communicate with the remote vlan?Home built NAC solution, using 802.1x authentication on switchports for public areas. If user is an employee, communicates with the supplicant on their machine, and places them on an internal vlan.If user is a guest, user fails 802.1x check and is placed on a "guest" vlan with an ACL and external DNS.If placed on the guest vlan, the user has to accept a terms of use form.This is working currently with our 5508s without any issue, however we have some remote offices we'd like to roll this out to that are using 2504 controllers. I'm hoping there's a way that I can use the 5508 as an anchor or vice versa to make this work.
View 1 Replies View RelatedCisco Wireless :: 2504 And 1142N AP To Create Individual User Accounts Who Are Connected
Apr 20, 2011We are planning to setup a new WLAN using Cisco 2504 WLAN Controller and 1142N Access Point.Is it possible to create individual user accounts for the users those who all are connecting to this WLAN Network by using the 2504 WLAN Controller ?
View 11 Replies View RelatedCisco Wireless :: Can WLC 7.0 Restrict Guest Session Time
Feb 5, 2013We have Cisco WLC 7.0 with private and public accesses. Is it possible to limit guest session time? For example, any visitors’ connection will be disconnected after 1 hour.
View 3 Replies View RelatedCisco Wireless :: AES128 - Traffic From Guest User Encrypted?
Sep 12, 2011The design is typical Cisco unified wireless solution. In such a implementation, is the traffic from the guest user who has successfully authenticated via WEB-AUTH encrypted? If so, what is the standard used, AES128 or TKIP?
View 6 Replies View RelatedCisco Wireless :: WCS Creates User Guest Access On WLC 5508
Feb 23, 2012In my Wireless network, I have two appliances WLC 5508 running version 7.0.116.0.I have a WCS running version 7.0.172.0, deployed on a windows 2003 server.I've imported the two WLCs in my WCS in order to centralize the monitoring and the configuration tasks.Now I'm facing an issue when I want to create a guest user from the WCS, rather than creating this user access on each WLC. The creation of the user account is working good, the replication is done on the both WLCs, but on one of my WLC the guest user account is deleted after one hour(around).On the second WLC, the same user account remains during all its life time.In attachment a screen shot of the advanced parameter of the guest user.You can see that the user was created on the both WLC but is only active on one ... and unfortunately the wrong because the AP is associated with the other WLC.
View 2 Replies View RelatedCisco Wireless :: 5508 - Export Guest User Accounts To New WLC
Dec 19, 2012I've got a WLC5508 (7.0.116.0) that is managed by WCS (7.0.172.0). I set up another WLC5508 with the same code and managed by the same WCS. Now I'd like to export all the 800 guest user accounts with the passwords from the old WLC and import them into the new WLC.
View 10 Replies View RelatedCisco Wireless :: SMB Pro AP541 - Sign A Guest A Time Frame
Aug 4, 2010we plan to implement the SMB Pro AP541 for a guest access solution.is there a lobby ambassador like on the big wireless lan controller?is it possible to sign a guest a time frame - e.g. guest user has only 60 min access to the internetis it possible to enter a lifetime for the guest user - e.g. guest user can only login until 10.10.2010
View 2 Replies View RelatedLinksys Wireless Router :: Guest / User Authentication E2000?
Jul 7, 2011E2000 has the guest account feature. Not sure if all guests shares the same login credentials. I would like to have guests account use seperate logins. Is this feature available? Another thing, I read the manual and it is indicated that only up to 10 maximum guest acccounts is allowed. I am looking for more than 10 - kinda like a hotspot software.
I've been looking everywhere. I've seen hotspot system, ddwrt, chillspot, etc. But it's complicated as firmware needed to be flashed.
Cisco :: Wireless 5508 Controller - Guest Wlan Time Of Day Restrictions?
Oct 2, 2011Looking to add time of day restrictions to our Guest WLAN that is currently in its pilot phase.
Is there a way to config time of day access to a WLAN ?
Cisco :: WLC 2504 Interfaces And Guest Networks?
Jan 10, 2013I installed a WLAN with a WLC 2504 and 1140 APs. My network is configured the following way. 10.10.X.X/8. Port 1 on my WLC has the following interfaces management with the ip address 10.10.X.5 and the virtual interface. I have one secure SSID on the management interface. DHCP is done on my Sonicwall firewall. I was advised to create a second interface called AP-Manager and i have the following questions:
1. Do i create a new port or do I create the AP-Manager interface on the same port as my other interfaces?
2. Once i create the new interface of AP-Manager, will my APs migrate over to this interface?
3. Do i need to create the AP-Manager interface or leave all my AP's on the management interface?
4. Second do I need to create a services interface and if yes, on port 1?
I also need to create a guest network that would have the ip scheme of 172.16.X.X and have the guest authicated by level 3 web authication.
1. Do i create my guest interface on port1 or create a new port?
2. DO i need to point my DNS of the interface to the virtual interface.
Cisco :: 2504 WLC On Edge Network For Guest Wi-Fi?
Jan 21, 2013I have a 2504 WLC with a 1042 AP and I have it placed on my edge Cisco 3750 switch. I have the management interface of the WLC set on my WAN IP 71.x.x.x subnet range, and I have the WLC doing DHCP duties with a DHCP scope of 192.168.X.0. I have my DNS servers set on external DNS servers out on the Internet.I have two Cisco 3845 Routers on my edge network - one for each ISP with BGP protocol.
Since my native VLAN is 71.x.x.x, I added a sub interface on my main core router and gave it a 192.168.x.1 255.255.255.0 address for the gateway. Also, I added ip prefix-list iBGP seq 10 permit 192.168.x.0/24 le 32 to my main core router. On my secondary ISP router I added ip prefix-list iBGP seq 10 permit 192.168.X.0/24 le 32, and ip prefix-list OUT seq 10 permit 192.168.x.0/24 statements.
I added VLAN 10 to my edge switch and gave it IP 192.168.x.2 255.255.255.0, and the switchports that my core router and my WLC are connected to the edge switch, are in trunk mode with encapsulation dot1q 10. The switchport on my edge switch that the AP is connected to is in switchport access mode.
I can connect to the wifi with a 192.168.x.x IP address on my laptop, but I cannot get any Internet access. Is it possible to have the DHCP scope be in a different subnet than my WAN IP subnet, and allow guests to get to the external Internet only? Do I need to put the WLC somewhere internal on my network i.e. the DMZ and then tunnel the traffic out to the Internet with no Internal network access?
Cisco :: 2504 WLC / 1142 APs - Guest And Secure Network
Nov 19, 2012I have a 2504 WLC and x6 1142 AP's and currently have this working on our corporate network (still in test phase). So far so good and looking at authentication via radius next for this.
We have a separate ADSL connection that is external to the corporate network and what i would like to do is based on SSID (in this case i'll use "Guest Access") i would like any clients etc that visit to be able to connect to our wireless but not be able to connect to our corporate network.
Cisco Wireless :: 3502 - WLC User Rate Limit On Guest SSID Anchor Controller
Jul 30, 2012We have been deploying 3502 APs remotely to locations with full T1s that backhaul to where I sit at HQ. Both the foreign and anchor controller are here at my location.
I am seeking to rate limit per user the bandwidth each client will get on the guest internet ssid. As you know this traffic is encapsulated in capwap between the AP and the controller so I cant use a standard ACL on the switch or router.
We are trying to keep the guest internet access usage in check on the T1 at any given site so the other ssid's & local lan traffic is not overly competing for the bandwidth.
I found the place to edit the default profiles in the controller but the documentation really isnt clear on best practices.
So I put it to you my fellow wireless engineers to suggest how you are implementing bandwidth management on your wireless guest internet.
Oh and here is my hardware & software levels.
5508wlc - forgeign
4402wlc - anchor
Software Version7.0.230.0
Cisco Wireless :: 5508 - Bypass / Remove Certificate Page For Guest User WLAN
Jul 24, 2012When a guest user first trys to access the "guest" WLAN, they are presented with a "certificate page" before the web athentication page / login is presented. The WLC forces an internal redirect to https://1.1.1.1 causing the certificate page to appear. Can this be bypassed? I am runiing 5508 with 7.0.220.0.
View 12 Replies View RelatedCisco Wireless :: Setup A 2504 To Have One Guest WLAN And One Staff WLAN?
Jun 10, 2013I would like to setup a 2504 to have one Guest WLAN and one Staff WLAN with a controller port for each WLAN connected to different devices.
I would prefer to connect the WLC Guest port to an ASA 5510 and the WLC Staff port to an internal 2960S switch. Will this work? I haven't setup a 2500 series controller previously.
Cisco :: User Activity Logs On 2504 WLC?
Oct 16, 2012I want to secure our WLAN via Web Authentication with our new Cisco 2504 WLC. But where do i find user activity logs?
View 2 Replies View RelatedCisco :: WLC 2504 QoS Per-user Bandwidth Contracts?
May 25, 2013does the cisco wlc 2504 (software release 7.4) support QoS per-user bandwidth contracts ? I only can see the default QoS profiles (gold, platinum...) i can't see the per-user bandwidth contract to modify it. shoud it be activated ?
View 3 Replies View RelatedLinksys Wireless Router :: E4200 Control On / Off Time Of Entire Guest Network
Sep 22, 2011Can i control the on/off time of the entire guest network?Or can use parental control for computers logged onto the guest network?
View 1 Replies View RelatedNo Wifi Connection For Guest User
Oct 30, 2011i am loaning my laptop to a friend to use while traveling and I have created a "guest user" account so he doesn't have to go through my home pages and personal files. Well, whenever this account is being used, there is no WiFi connection logo and so it cannot be connected to the internet via WiFi...
View 1 Replies View RelatedTime Restriction For Guest Users?
Feb 16, 2013I am a restaurant owner and have a wireless network set-up via DLink DSL 2730U router. Now some times I get customers who demand to use the network and they use it for free which I find irritating. I have found one solution of 'Guests/Virtual Point' but I need to limit the time (say 15 minutes) for which they can use the network.
View 1 Replies View RelatedCisco AAA/Identity/Nac :: Can Use ACS 5.2 As Guest User Authentication Server?
Jun 5, 2012Can use ACS 5.2 as Guest user authentication server?
View 3 Replies View Related