D-Link DIR-655 :: No Internet Access On Guest Zone 655RevB 2.03NA
Jan 21, 2012
I am fortunate enough to have unlimited interwebs through my DSL ISP, and I occasionally have guests that come by who would like to use it on their mobile devices.My problem is that when my Guest Zone is enabled there is no internet access. Otherwise the Zone functions 'normally' devices within the zone can view each other, but not outside.It is important for me that the Guest Zone doesn't see any of the devices within my Host Zone.
DIR-655 - Rev B 2.03NA
Connection: PPoE
Reconnect mode: On Demand
Wireless Mode: Mixed G/N
View 3 Replies
ADVERTISEMENT
Mar 23, 2010
I recently picked up a 655 with hardware version A2 and flashed to the latest firmware. I have a HotBrick router. I only want to use the 655 as an access point AND especially to use the Guest Access or Guest Zone feature to allow visitors to bring their laptops and not virus up my network. My home network is open among a few computers for things like SageTV, file serving, etc.I can get the 655 to function just fine as a standard access point by following the instructions to turn off UPNP, DHCP, etc. as outlined in the manual. I then enable the Guest Access/Zone feature, and of course give it a different SSID name, make sure it's on 24 hours a day, that it is enabled, etc.
But, none of my computers can access the internet via the Guest Account feature, just the regular wireless portion. They show connecting to the Guest Account name, etc. but no internet. I've disabled every security feature I know of to test this. Again, the "regular" WAP tests great, but no Guest Account, which is really important and one of the main reasons I bought the unit.I'm wondering - does the Guest Account feature only work if the 655 is the main router, has DHCP enabled, etc.? Does it have to be the one and only router? If so, I'm in trouble, because I can't really give up my HotBrick due to failover features, etc.
View 5 Replies
View Related
Nov 25, 2012
im having a problem on my DIR-655, i just recently updated my DIR 655 2.03NA(which is no problem at all) to 2.10NA, & im having problem on my GUEST ZONE wireless network everytime i connect my Iphone 4 to it every second 10 seconds it goes on & off & i try to connect to the main wireless network it was working fine any causes to this?
View 14 Replies
View Related
Jan 18, 2011
I have disabled the internal DHCP/DNS server in the routers firmware. I have enabled the wireless guest access SSID. A client associating with the Guest Wireless Access will obtain a DHCP address from the server in the LAN zone, but cannot resolve DNS as the firewall prevents traffic to flow from the Guest zone to the LAN zone, as it should.Is there a way to enable the DHCP server and DNS server in the routers firmware, but only on the Guest Zone? Is it possible to get the Guest Zone to have a different subnet?Tech support has hung up on me twice now.
View 5 Replies
View Related
Apr 28, 2011
I'm wondering if there is a way to prioritize traffic on the router's main WiFi over the guest zone or if there is a way to limit the bandwidth on the guest zone.
Ideally, I'd like to keep a locked primary WiFi for high-speed usage (I know, nothing it really ever secure) and an open guest zone for low-speed usage to whomever wants it. As far as I can tell, the DIR-655 doesn't support this kind of configuration.
View 2 Replies
View Related
Jan 25, 2011
I recently changed my ssid name from the default "dlink" to a more unique one. The problem is that the router is still broadcasting the default ssid along with the new one. Guest zone is disabled and the new ssid is hidden. But the default ssid is not hidded. Using wpa2 with aes, hardware ver. A1/A2 Firmware ver 1.21. How to remove the "dlink" ssid?
View 4 Replies
View Related
Jan 19, 2012
Have DIR-655, HW A3, F/W 1.10. On the Advanced tab, there is no Guest Zone option. Can this be fixed with a firmware update? If so, which one?
View 2 Replies
View Related
Mar 3, 2013
I am thinking of getting the DAP-1522 access point but I wondered. Can I set it to broadcast on 5GHz for my laptop and ipad, so they can stream video. Then set the guest zone to broadcast on 2.4GHz just for my lame printer, my printer does not have LAN and only wireless b & g. If I do put the printer on the guest zone and I enable routing between zones, will my laptop be able to print to my printer?
View 1 Replies
View Related
Jul 22, 2012
207.NA Firmware, B1 Hardware in use on a DIR-655, Time Warner Cable setup. Nothing to do with Revision, cordless phones,I saw this asked once before specifically here, but it was never answered.After several attacks via our cable network and neighbors, we've HAD to turn on MAC filtering. There are TONS of devices attached normally so two situations popped up:
#1: What happens when you max out the authorized MAC address listings? Does the page get longer when you save/reboot it? Do I have to do it manually from there forward and where can I get down to the core programming level to edit the code and put the MAC's that are around and on 100% of the time to open up the plug-in list on the GUI?
#2: Guest Zone - we NEED a way to have random guests get on our Network with a different password we can randomly change to prevent the outside abuse, etc. but am I understanding what little else has been posted that the MAC filtering also covers the Guest Zone and therefore I have to stick them in there before they could simply log on with the current password? Is there any way to change/stop that without eliminating MAC filtration as a whole?
View 4 Replies
View Related
Jul 22, 2012
I can't seem to get the router to adjust for DST for Mountain Time. Enable Daylight Saving is checked. Time zone is (GMT-07:00) Mountain Time (US/Canada). Daylight Saving Offset is +1:00 Things I've tried that don't work:
1) Unchecking Enable Daylight Saving. Save/reboot. Check Enable Daylight Saving again. Save/reboot. No difference for Mountain Time but makes a difference for Pacific time. See item 5 below.
2) Adjusting the offest to +2:00. Save/reboot. No difference in time so it is completely ignoring this setting.
3) Factory reset. Only settings configured after the reset are the time settings.
4) Tried 3 different NTP servers. Not surprising this has no effect as the time zone and DST information is not part of the protocol.
5) Change time zone to Pacific. Save/reboot. Has correct Pacific time adjusted for DST. Uncheck Enable Daylight Saving. Save/reboot. Correct Pacific time without DST. Change back to Mountain Time and Enable Daylight Saving. Save/reboot. Time is 1 hour behind what it should be for Mountain.
6) Change time zone to Central. Save/reboot. Has correct Central time adjusted for DST. Change back to Mountain Time. Save/reboot. Time is 1 hour behind what it should be for Mountain.
View 3 Replies
View Related
Jun 9, 2012
I have a Cisco 2901 which terminates a Class C address pool. I have split the Class C address pool into 3 sub-nets and 2 zones and created a non-addressable pool (private pool):
dmz-zone : x.x.x.0 TO x.x.x.127 (x.x.x.0/25)
in-zone: x.x.x.128 TO x.x.x.159 (x.x.x.128/27) & x.x.x.160 TO x.x.x.191 (x.x.x.160/27)
private-zone: 192.168.x.0 TO 192.168.x.255 (192.168.x.0/24)
I have configured private-zone NAT to use address pool x.x.x.161 TO x.x.x.189 within the in-zone.
Within the:
dmz-zone - are servers for : DNS, Syslog, SIP & HTTP/HTTPS in-zone - is a SMTP mail server which is behind VPN Gateway/NAT, TomCat (Application Server) and PostgreSQL Server private-zone - is where all standard users are operating from and they can access the SIP & HTTP/HTTPS servers within dmz-zone My problem is that I cannot seem to configure the ZBFW to allow the dmz-zone HTTP/HTTP server to redirect to in-zone TomCat server.
I do not want to make the TomCat server generally visible and am instead using the Apache proxy/ajp13 to connect from dmz-zone server to in-zone server.However I cannot seem to get anything (including icmp) to work from dmz-zone to in-zone.
I have Policy:
POLICY-DMZ-IN (dmz-zone to in-zone) which has:
any any udp/tcp inspect
any any icmp inspect
unmatched traffic DROP/LOG
But I still cannot get anything from dmz-zone to in-zone...Could the POLICY-DMZ-IN be being overridden by other dmz-zone to out-zone policies?
NOTE: I have routing rules for each of various sub-nets and all out-zone to dmz-zone, out-zone to in-zone and private-zone to out-zone, in-zone and dmz-zone routing works ok, so it appears problem is with ZBFW not routing table.
View 4 Replies
View Related
Aug 18, 2011
Is it possible to allow certain websites to bypass the web authentication pages, so that they do not need to authenticate to get to our own website, but do have to if they wish to go anywhere else?Looking at a 5508 model at the moment
View 4 Replies
View Related
May 9, 2012
I have two SSIDs on an Autonomous Access Point, that goes to a 2960 switch, that connects to a L3 3560. I have a vlan for admin/private internal access that uses the native vlan (1) and guest vlan (50). I have configured both and I am trying to get both to go out the same Internet connection.
I cannot get the guest access to access the Internet. It looks like my computer will go, but it just comes up saying no Internet access.All interfaces are trunking this vlan properly. I can communicate from the laptop to the 3560 but I just can't get to the Internet.
View 10 Replies
View Related
Dec 13, 2012
Here is my setup:
Netgear WNDR3700 - Main router, DHCP turned on
4x Netgear WNR2000 - Setup as Access Points (DHCP turned off), connected to main router via LAN ports
I only want the guest network to have internet access. I have the guest network enabled on the router and access points with the option to "Allow Guest network to access main network" disabled. My problem is that since the access points aren't hooked directly to my modem via the WAN port, the guest network broadcasted from the access points does not have internet access.I have read up on setting up a separate subnet for the guest network using DD-WRT but was curious if there was a way to get the desired result with the stock Netgear firmware.
View 9 Replies
View Related
Apr 22, 2012
I'm a member of a club and we have just got BT Business Broadband with BT Business Hub 3. The club has one WiFi laptop which will occasionally access the BT Hub 3 using WiFi for internet use only. So essentially we have no network as such, just the BT Hub and a laptop.I would like to allow some club members to have internet access (WPA2 password), but without allowing access to the club laptop in any wayAs I said previously, the club laptop will only be active occasionally, so actual exposure is limited, but ideally I would like for the club laptop to be invisible to others when it is connected. I would also like each members equipment to be hidden from each other, so nobody can access each others data etc.. Can I achieve this simply? If so, do I need extra equipment?
I do have some donated equipment available: Netgear WAG102 Wireless Access Point, D-Link DSL-2640R Broadband Wireless G ADSL2+ Router and US Robotics 9106 SureConnect ADSL Wireless Gateway. Could I use any or all of these?I know this donated equipment is only Wireless G, but speed for the members is not important as they will only use internet access for emails and occasional google searches etc.I've tested the WAG102 at home, by plugging it into a LAN port of my BT HomeHub3 and giving it a different SSID, which works OK, but I can still see the other equipment connected wirelessly to my BT HomeHub3, although I cannot access my home laptop etc. because they are password protected.
View 3 Replies
View Related
Oct 28, 2011
I am running a 5508 WLC with 10 Access Point. we need to allow Internet Access to Guest. 10MB DSL Internet is dedicated for Guest. This link is terminated on a regular ADSL modem without being part of our network. We want all Guest Internet traffic to reach the ADSL Router. where should I create the Guest VLAN / where the DHCP for Guest users should be created. what is the best practise for similar setup.
Our Network is simple
ISP_Reuter-------ASA_Firewall--------------4505------------LAN-switch 2950
ADSL_modem------------ users connect via wireless but restricted to certain area only.
View 9 Replies
View Related
Mar 6, 2013
We have the RV180W router and the WAP321 access point in our business. We want to broadcast two SSIDs from both locations: the office SSID, which shares routing to LAN traffic, and a guest SSID.The office computers are attached via ethernet to a switch off of LAN port 1 on the router. The AP is attached to LAN port 2 on the router.On the router, the office SSID and the LAN are members of VLAN 1. The guest network is a member of VLAN 2. From the router, everything works just fine.On the WAP, the staff SSID works fine, but the guest SSID has no internet. Both the office and guest networks get DHCP successfully from the router.Our VLAN membership table in the router and WAP are attached, as well as other configuration details.Why would we not be getting internet on the guest ID only on the WAP?
View 8 Replies
View Related
Jan 15, 2012
I have a subnet for guest network access, both wired and wireless. We have a Netgear ProSafe that is trunked to a Cisco 2901 performing 'Router-on-a-Stick'. For most internal traffic, it all stays behind the ASA. But for guest traffic, I have a route-map that sets the next-hop address as the outside interface of the ASA. The question is, how can I still permit those users to access our internal DNS servers? Do I need any particular NAT translations, exemptions, DNS doctoring, hairpinning, etc.? I have an ACL on the inside interface that permits traffic from the guest networks to our internal DNS servers, and then the next ACL line denies any other traffic from the guest networks to any of our internal networks.
View 7 Replies
View Related
Jul 24, 2012
I have the Netgear wndr4500 router setup as an AP. The wndr4500 has a feature for guest wifi but will not connect to the internet. The main wifi will connect to the internet fine. I'm wondering if I use the WNDR4500 as an AP, the guest features do not work?
View 2 Replies
View Related
Jul 8, 2011
We have the E3000 Router and the guest internet access DOES NOT work. We occasionally repair other people's PC's and I seriously do not want to allow access to our home network. Recently, we are trying to access through guest, on a Win 7 Dell Notebook. It takes the passcode but no internet connection.
View 1 Replies
View Related
Apr 8, 2013
Any issue creating a guest vlan to use the WIFI on an 891W router? The IOS is version 15.1. I have created discreet Vlan's and setup subinterfaces on both the WLAN_AP0 and GigaEthernet 0 interfaces with dot1q encapsulation. The client will receive an IP from the pool but cannot ping or connect beyond the default gateway.
The external interface is using Nat overload and all wired clients are successful in connecting to outside addresses. I have insert a permit any statement in the acl which affects the external port but still no success.
View 7 Replies
View Related
Feb 26, 2012
I need to configure a network in 1 small office space that segregates 2 company domains but allows them to share an Internet connection, a WAP, a couple of printers, and a non-Cisco VoIP phone system. And, it needs to provide guest access to the internet and printers via wireless. I have a SG300-28P, an SA520W, and a WAP2000 to make it all happen. [code]
View 3 Replies
View Related
Jul 3, 2012
I want to set up internet guest access with my wap321. No matter what I do the guest can see my whole network. Not sure what your definition of guest access is but letting them brows around my assets is not mine. I have a cheap Linksys router at home and that guest access works the way I want this AP to do.No wizards for guest access... In fact there is only one wizard by the way, i.e. basic set up.
My network includes the wap321, sg200-26p switch and the rv042g router
View 4 Replies
View Related
May 6, 2013
I have setup an aironet 1262 with my ASA 5512 and configured it as an access point. I would like to add an additonal network to the ap for guests to use but I would like to segregate the traffic and only allow it to the internet. I am not sure how to start this and go about setting the routes, security and address scope.
View 1 Replies
View Related
Apr 26, 2012
I'm trying to find a document in Design Zone about configuring a Wireless AP and I wasn't able to find it. I have a good experience configuring switches, routers and firewalls in CLI and this is the first that I have my hands on APs (1240 AG).
View 2 Replies
View Related
Mar 3, 2013
I'm having an issue accessing a clients router on the WAN interface with Cisco config pro. I can get CLI access with SSH without any issue. I have port 22 and 443 allowed as management access from my public IP - SSH working fine but config pro being refused connection, Possibly a certificate issue?
View 1 Replies
View Related
Jun 26, 2012
I have set up a zone-based policy firewall with HA on two 2911 routers as per the Cisco security configuration guide, for an active/passive LAN-LAN cluster. All works as expected, but there is one problem I find: when the control link between the two devices fails, they go into an active/active state as each member assumes it's the last surviving member. The ARP entries for the Virtual IPs on the neighboring devices point to the device that last claimed the active role (usually the standby device). This works in a way, just sessions don't get synched anymore (control link is the same as data link). Now when the link comes back up, the preemtion works and the active, former standby device goes back to standby. But the ARP entries on the neighboring devices still point to the standby device and nothing goes (also sessions established during the active/active state are lost due to resync with the now active member).
This is a single point of failure and what I need is a way to mitigate that. Under:
redundancy
application redundancy
group 1
control <interface> protocol 1
only one control interface is allowed. Other manufacturers with similar functionality provide for the possibilty of a backup control link, for example the internal LAN interface or a dedicated backup link.
How would I go about that? Maybe use a port-channel for the control/data link (but I'm out of interfaces)?
View 1 Replies
View Related
Mar 7, 2012
-1x Cisco ASA5540
-1x Catalyst 3750x-48T (L3 Core Switch)
Id like to seek expertise on validating a simple firewall setup.
Do i trunk core switch traffic to the cisco ASA OR assign L3 link instead? It is basic understanding that the Cisco ASA is usually use for protection from our internet zone.A typical Cisco ASA setup would consist of outside, inside, dmz zone.
L3 core switch consist of 20 VLANS20 vlan needs to be blocked from each other. Eg Wireless Vlan does not have access to Server Vlan etc etc.
what is the best practise to filter ip address within vlan from reaching each other.Should i trunk all my vlan to the Cisco firewall? (For easy vlan restrictions: but is that best practise?)Or do ACL on the core switch itself? but what if i have tons of servers ip that needs specific ports blocking or etc.How would i be able to manage all my ACL on the core switch.
View 1 Replies
View Related
May 13, 2013
Region : UnitedStates
Model : TL-WR740N
Hardware Version : V4
Firmware Version : 3.1
ISP : T2
I have a problem with my tp-link router. I dont have an internet access of the router, updated firmware... When i connect to router by laptop the internet works fine, but when i connect to router by phone i have an internet access only 5 second and than i lost it, but still connected. I don't know what is the problem here, maybe phone?
View 3 Replies
View Related
Jan 9, 2013
Does the N750 (F9K1103V1) support Guest Access while in Access Point mode? It will not provide an IP address when a guest attempts to connect.
View 20 Replies
View Related
Jan 17, 2013
I have an n600 ( F9K1102 v1 , firmware 1.00.09 ). My ISP provides my main router for my network, but I want to use the N600 as an access point, I have activated the "Use as Access Point" feature.Is it possible to still utilize the Guest Access feature in this case?
View 1 Replies
View Related
Jun 9, 2011
My network is such that I want to extend the signal of the GUEST account. I have a WAP54G set up for that purpose and am getting a very strong signal. I can access the main network, but not the Guest, I cannot even see the GUEST access. Any setting change that needs to be made that will allow me to access the GUEST account from the Access Point?
View 2 Replies
View Related
Apr 22, 2013
I've been following those instructions to set a dir-615 as a wifi access point connected to a switch : [URL]. I am now able to connect to the 615 either by wifi or by typing it's ip address with another computer connected to the LAN. Connecting to the 615 by wifi, i can do a ping request to urls or receive and send mail with my e-mail client but i can't access websites using my browser.s it possible to get it working without installing some kind of modified firmware? I tried plugging the Internet ethernet cable in the LAN and Internet ports of the 615, none works.
View 3 Replies
View Related
