D-Link DIR-655 :: Daylight Savings Not Working On 2.03NA / 2.07NA?
Jul 22, 2012
I can't seem to get the router to adjust for DST for Mountain Time. Enable Daylight Saving is checked. Time zone is (GMT-07:00) Mountain Time (US/Canada). Daylight Saving Offset is +1:00 Things I've tried that don't work:
1) Unchecking Enable Daylight Saving. Save/reboot. Check Enable Daylight Saving again. Save/reboot. No difference for Mountain Time but makes a difference for Pacific time. See item 5 below.
2) Adjusting the offest to +2:00. Save/reboot. No difference in time so it is completely ignoring this setting.
3) Factory reset. Only settings configured after the reset are the time settings.
4) Tried 3 different NTP servers. Not surprising this has no effect as the time zone and DST information is not part of the protocol.
5) Change time zone to Pacific. Save/reboot. Has correct Pacific time adjusted for DST. Uncheck Enable Daylight Saving. Save/reboot. Correct Pacific time without DST. Change back to Mountain Time and Enable Daylight Saving. Save/reboot. Time is 1 hour behind what it should be for Mountain.
6) Change time zone to Central. Save/reboot. Has correct Central time adjusted for DST. Change back to Mountain Time. Save/reboot. Time is 1 hour behind what it should be for Mountain.
View 3 Replies
ADVERTISEMENT
Jan 14, 2013
Region : UnitedStates
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
Seems that Daylight Savings Time starts on March 10th, 2013 this year. The drop-down menu only goes up to 6.
View 1 Replies
View Related
Oct 30, 2011
So I was checking some core graph links, and every single one of them had a spike around 1am and 3am this morning. At first I thought was on earth could this spike be, but it affected every single on of my links. I was seeing certain Gig links with over 1.5Gb of traffic going through them and some of my transit links way over what they are capable of which is impossible.Then it occurred to me that our clocks went back for an hour this morning at this same time. What can't Cacti adjust itself for this? Or am I missing an option somewhere?
View 6 Replies
View Related
Jan 21, 2012
I am fortunate enough to have unlimited interwebs through my DSL ISP, and I occasionally have guests that come by who would like to use it on their mobile devices.My problem is that when my Guest Zone is enabled there is no internet access. Otherwise the Zone functions 'normally' devices within the zone can view each other, but not outside.It is important for me that the Guest Zone doesn't see any of the devices within my Host Zone.
DIR-655 - Rev B 2.03NA
Connection: PPoE
Reconnect mode: On Demand
Wireless Mode: Mixed G/N
View 3 Replies
View Related
Jan 5, 2013
I just downgraded to firmware version 2.07NA from 2.10NA to test a wireless connection issue with my wife's IPhon4s ISO 6 not connecting as N device only shows as a G device.My router version 2.07NA is now jerkier than with version 2.10NA. Firmware 2.10NA seems to me to be more fluid with web pages. I am going to switch back to firmware 2.10NA.
View 1 Replies
View Related
Jun 21, 2012
I am today playing with the settings in my DIR-655 NA B1 router when I notice that a firmware upgrade is available.I clicked the button and the router automatically downloaded the file named DIR655B1_FW207NAB09.bin. I flashed it and was saying that it needed to wait 180 seconds (3 minutes) to reprogram the router after which it came up with a 404 not found on the screen. I am not able to access my router, it is bricked and I can't even re-flash the firmware comes back with Incorrect hardware ID image, Please check. I notice that the 2.07NA firmware file on the website is named DIR655B1_FW207NAB05.bin. What gives this is the first time a firmware upgrade has bricked anything I own?
View 14 Replies
View Related
Sep 27, 2012
i have a d-link wireless router model DIR-601 and all the lights keep turning on and off besides the power
View 1 Replies
View Related
May 16, 2008
How to unblock limewire cuz its not working after i installed a DIR-655 at home.
View 3 Replies
View Related
Jun 6, 2012
I have bricked my DIR-825 when performing an upgrade of DD-WRT. Now I am not able to go on to the Recovery Web page. ( 192.168.0.1 ) after performing the 30/30/30 rule, wich always worked before.
I had done an update of dd-wrt and lost all of my wireless adapters, they said to load open-wrt, find the caldata and write this. This all worked. But after a reboot, the deviced bricked on me .
View 3 Replies
View Related
Jul 18, 2012
I just upgraded from DIR 615 to DIR 655. I used the installation CD but I have no wifi signal detected. Wired connection with 655 works though. If I go back to 615, wifi works.
View 1 Replies
View Related
May 4, 2011
I'm having problems connecting my ip phone with DIR-615.I got a plug and use ip phone from vocalocity, it's actually from the office where we also had the same problem and a the end we just changed to a different router coz we didn't have time to look for solutions, anyways i brought one of the phones to my house and plugged it to the d-link but it's not working.
View 12 Replies
View Related
Oct 15, 2010
I tried to find an answer to my issue however came up short. Did find,url... but that for a 600 not 601. I have "Mac filtering on and to only ALLOW the addresses below" however, it allows any computer, even if i do not have them listed.
View 3 Replies
View Related
May 19, 2011
Recently, something weird occurred. My Motorola Surfboard cable modem (on PenTeleData/Service Electric) and my D-Link DIR-655 don't seem to be getting along.If I plug a network cable directly from the modem into a computer, it works fine. However, if I go from the modem to the router's WAN port, it doesn't seem to want to connect to the router at all (no matter what DNS settings I change on the router (including spoofing the MAC address of a working computer) or which network cables I use; the "activity" light on both the router and the modem remain off).Also, if I take a network cable and plug one end in one of the LAN ports on the router and the other end in the WAN port, it works (well, the "internet" activity light on the front of the router comes on and the status page at http://192.168.0.1/Status/Device_Info.shtml says "Cable Status: Connected; Network Status: Incorrectly configured - check logs" instead of "Cable Status: Disconnected; Network Status: Disconnected").
View 11 Replies
View Related
Apr 3, 2011
how to get web logging working? I set up an Access Control policy for web logging only for one machine on my network. I also turned Syslog on and have Kiwi syslogd running on my desktop. However, it's not logging web traffic. how to get web logging working correctly?
View 4 Replies
View Related
Oct 17, 2011
I have Ver E3, with firmware 5.10. Like it says above, Wireless N is not working. I've already going into Manual Wireless set up and selected Mixed G and N. All of my devices will connect, but only as G devices.I'm reluctant to set it to "N only" for fear that none of my devices will be able to connect.
View 14 Replies
View Related
Mar 14, 2013
The 5 GHz has been working for 2 months but now, no longer available. No visible 5GHz wireless network. Reset to factory setting and reinstalled but still no 5 Ghz. The 2.4Ghz is working fine.
Location Australia
fcc id: KA2IR835A1
IC: 4216A-IR835A1
P/N: IIR835NAU...A1E
S/N: QBKA1C5001387
WPS PIN: 24784784023
H/W Ver: A1 F/W Ver: 1.01
View 1 Replies
View Related
Feb 19, 2013
I have a D-Link DIR-615 router and can't get the internet working and have done everything possible to get it working. the globe light which is the internet light will not turn from amber to green. I have done a factory reset which is why this occurred in the first place. After the reset the globe stayed orange and the internet refused to work now everything is up but the wireless will not work nor the internet I have gone through both the manual set up and set up wizard and tried all options.
View 8 Replies
View Related
Nov 11, 2011
I have been using a d-link router for some time now and since yesterday it has stopped working ( I have an orange 'world' light on all the time) After looking around this site I have tried resetting etc and nothing works. If I plug the ethernet cable into the modem I can get on the internet if I plug the cable into the router then nothing. These are the details I got from the config all when I plugged the ethernet into the router.
View 3 Replies
View Related
Mar 3, 2011
I have a D-Link wireless adapter (DWL-G122) that I have been trying to install on a Windows XP computer. After various uninstalls and reinstalls of the drivers and programs that come with it, I have found currently the best way to get it to work is leave the D-Link programs uninstalled and have Windows install the driver itself.The problem is, it doesn't seem to keep the drivers on restarting, so every time the computer is restarted, it must be installed again. This is not ideal.It occasionally worked when I installed from the CD, but the D-Link programs that would install with the drivers created problems of their own.
View 2 Replies
View Related
Jul 10, 2011
My router suddenly stopped working yesterday and I've tried everything I can think of to fix it. I have one computer wired directly in to it and a few laptops that use wireless connections.The power LED and the internet LED light up, but the status LED and the WLAN LED do nothing. Pushing the factory reset button on the back doesn't seem to do anything.Can't connect to the router site (192.168.0.1) The internet works fine when I plug in to it directly, so its definitely the router.
View 3 Replies
View Related
Jan 29, 2012
I bought a TP-Link TL-WR841N which i have managed to setup up properly, i am able to connect to the wireless and get internet access. However the minute i walk out of the room or a few meters away i am disconnected and i can't re-connect, i get the "windows cannot connect to TP-LINK" message. The signal strength in on excellent and i know it works because when i stand near it, it works perfect.I phoned TP-LINK technical support who were pretty useless and couldn't fix the problem.
View 3 Replies
View Related
Jul 20, 2012
im deployment and we have hardwire internet in my room. wanting to use all other devices eg. iphone and what not i bought a router to plug the hardwire in to and run the wifi off the router for all devices. its made by TP-LINK the model is TL-WR940N. it worked great for a while but then kept giving me DNS server is not responding but i could plug the hard cable in my computer and the internet would work fine? so i reset the router and set it all up again like before. Now i cant get it to run wifi off it anymore it recognizes and connect through wifi but no internet and its telling me i need to plud the hardwire in to my internet but my computer is recognizing it and saying i have internet access, but no internet i mean its not even thinking if there is internet.
View 1 Replies
View Related
May 7, 2011
I have a Dir 655 router how can I know if one of the antennas is working right?
View 5 Replies
View Related
Feb 5, 2011
It worked fine with my last router. It just doesn't seem to connect securely. It comes up under my iTunes, but once I go to enter the code, it doesn't show up as completed. Also, a utorrent monitoring app cannot connect to my computer, which is set up right at my computers end, but won't connect at all from my phone over wi-fi.
View 14 Replies
View Related
Feb 7, 2011
To fix a bunch of other problems I've installed the 313NA firmware on my rev. C2 DIR-615
I can connect to my ISP and DHCP just fine, and I get DNS servers back just fine, but the DIR 615 doesn't serve DNS correctly for the devices on the LAN. If I set the LAN machines' DNS manually to the IP addresses provided by my ISP they can look up hosts just fine. With them pointing at the DIR 615 for DNS they get nothing.
When I attempt to perform a name lookup using the admin System Check -> Ping Test I get "Unknown Host". The same name lookup up by any other LAN machine using the same DNS hosts gets the correct result. I've made sure there's no caching.
View 14 Replies
View Related
Mar 25, 2012
I need configuring the dsl-320t modem connected to the dir-600 router. Already tried some configuration, with dhcp enabled and disabled, tried to assign a static ip to the router and tried to put the modem in bridge mode, but fail miserably .Now I've resetted both devices, if I connect with the ethernet cable my pc and one of the four lan connectors on the router, and then use another ethernet cable to connect the modem port with one of the other three free router port, I can connect to internet. Any other configuration i tried has not worked.
View 9 Replies
View Related
Mar 22, 2012
Once every couple of days the wireless service seems to disappear. I've connected to the router from a wired computer and everything looks ok from the d-link panel, however its not showing up as an available wireless network on the wireless units. Pulling the power off for 30 seconds tends to get it working again. I'm configured bg and n. I need a mix... an old B laptop, have one machine that has a G NIC, and the rest are N.
View 14 Replies
View Related
Aug 1, 2011
Setup that was working. DCM-202 to AT&T Micro Cell to DIR-601 wi-fi.Now I can direct connect MacBookPro to DCM-202 and get internet. If I connect to DIR-601, either via ethernet or wi-fi, no internet. If I try another router, Apple Time Capsule, I get same result. If I just do an ethernet pass thru using the AT&T Micro Cell, still no internet. Basically, the DCM-202 will direct connect via ethernet to my laptop, but not pass thru an ethernet connection for any other devices.
View 1 Replies
View Related
Oct 26, 2012
My DIR-655 wireless has stopped working after a few years of flawless operation. It still works for wired operation. I was running Firmware 1.21, tried rebooting, resetting to factory, powered off the unit, etc. without success. Decided to Upgrade to the firmware to 135 NA, still no success. I am in British Columbia on Shaw Cable. On the Status Page under Wireless LAN, the Wireless Radio shows "Init failed".
View 3 Replies
View Related
May 10, 2010
I am using my DIR-825 as a switch and AP. I have turned off DHCP and plugged the internet into the lan-1 port. This works perfectly for IPv4, but I cannot get IPv6 to work. On the outside there is native IPv6 running radvd. How should I configure IPv6 on my DIR-825?
View 2 Replies
View Related
Jan 3, 2010
I just bought the Dir-601 router and so far it is fast and stable. However, I haven't been able to get it to work on Quake 3 (no connection to the Master server) or VOIP using the Linkysys Pap2 voip adapter. I tried setting it up using the predefined port forwarding rules to no avails. I tried port forwarding certain ports and even using DMZ but also without success. For some reasons, the router is preventing my computer to connect to any online server.
View 4 Replies
View Related
Mar 2, 2010
I may be doing it incorrectly, but I'm trying to configure web access rules. I first set up access control and tell it to use the website filter. I've tried configuring it by both MAC address and IP address (separately, not simultaneously), but it still allows the listed sites in the web filter to get through. Is there something else I need to block or am I not doing something correctly? The network is on DHCP reservation, so IP addresses are always the same. MAC addresses, as I mentioned, don't work, either and they are fixed and logged in the router.
View 9 Replies
View Related
Aug 29, 2011
I'm trying to set up opendns on my DIR-825, firmware v2.05. Under the Setup/Network Settings I set the primary and secondary DNS Server IPs to the ones from [URL] and save the settings and they don't stick.I have also unchecked the "Enable DNS Relay". Well, tried it on and off and neither pad a difference.
View 3 Replies
View Related
