D-Link DIR-655 :: Guest Wireless DHCP / DNS On LAN Zone
Jan 18, 2011
I have disabled the internal DHCP/DNS server in the routers firmware. I have enabled the wireless guest access SSID. A client associating with the Guest Wireless Access will obtain a DHCP address from the server in the LAN zone, but cannot resolve DNS as the firewall prevents traffic to flow from the Guest zone to the LAN zone, as it should.Is there a way to enable the DHCP server and DNS server in the routers firmware, but only on the Guest Zone? Is it possible to get the Guest Zone to have a different subnet?Tech support has hung up on me twice now.
View 5 Replies
ADVERTISEMENT
Mar 3, 2013
I am thinking of getting the DAP-1522 access point but I wondered. Can I set it to broadcast on 5GHz for my laptop and ipad, so they can stream video. Then set the guest zone to broadcast on 2.4GHz just for my lame printer, my printer does not have LAN and only wireless b & g. If I do put the printer on the guest zone and I enable routing between zones, will my laptop be able to print to my printer?
View 1 Replies
View Related
Nov 25, 2012
im having a problem on my DIR-655, i just recently updated my DIR 655 2.03NA(which is no problem at all) to 2.10NA, & im having problem on my GUEST ZONE wireless network everytime i connect my Iphone 4 to it every second 10 seconds it goes on & off & i try to connect to the main wireless network it was working fine any causes to this?
View 14 Replies
View Related
Apr 28, 2011
I'm wondering if there is a way to prioritize traffic on the router's main WiFi over the guest zone or if there is a way to limit the bandwidth on the guest zone.
Ideally, I'd like to keep a locked primary WiFi for high-speed usage (I know, nothing it really ever secure) and an open guest zone for low-speed usage to whomever wants it. As far as I can tell, the DIR-655 doesn't support this kind of configuration.
View 2 Replies
View Related
Mar 23, 2010
I recently picked up a 655 with hardware version A2 and flashed to the latest firmware. I have a HotBrick router. I only want to use the 655 as an access point AND especially to use the Guest Access or Guest Zone feature to allow visitors to bring their laptops and not virus up my network. My home network is open among a few computers for things like SageTV, file serving, etc.I can get the 655 to function just fine as a standard access point by following the instructions to turn off UPNP, DHCP, etc. as outlined in the manual. I then enable the Guest Access/Zone feature, and of course give it a different SSID name, make sure it's on 24 hours a day, that it is enabled, etc.
But, none of my computers can access the internet via the Guest Account feature, just the regular wireless portion. They show connecting to the Guest Account name, etc. but no internet. I've disabled every security feature I know of to test this. Again, the "regular" WAP tests great, but no Guest Account, which is really important and one of the main reasons I bought the unit.I'm wondering - does the Guest Account feature only work if the 655 is the main router, has DHCP enabled, etc.? Does it have to be the one and only router? If so, I'm in trouble, because I can't really give up my HotBrick due to failover features, etc.
View 5 Replies
View Related
Jan 25, 2011
I recently changed my ssid name from the default "dlink" to a more unique one. The problem is that the router is still broadcasting the default ssid along with the new one. Guest zone is disabled and the new ssid is hidden. But the default ssid is not hidded. Using wpa2 with aes, hardware ver. A1/A2 Firmware ver 1.21. How to remove the "dlink" ssid?
View 4 Replies
View Related
Jan 19, 2012
Have DIR-655, HW A3, F/W 1.10. On the Advanced tab, there is no Guest Zone option. Can this be fixed with a firmware update? If so, which one?
View 2 Replies
View Related
Jul 22, 2012
207.NA Firmware, B1 Hardware in use on a DIR-655, Time Warner Cable setup. Nothing to do with Revision, cordless phones,I saw this asked once before specifically here, but it was never answered.After several attacks via our cable network and neighbors, we've HAD to turn on MAC filtering. There are TONS of devices attached normally so two situations popped up:
#1: What happens when you max out the authorized MAC address listings? Does the page get longer when you save/reboot it? Do I have to do it manually from there forward and where can I get down to the core programming level to edit the code and put the MAC's that are around and on 100% of the time to open up the plug-in list on the GUI?
#2: Guest Zone - we NEED a way to have random guests get on our Network with a different password we can randomly change to prevent the outside abuse, etc. but am I understanding what little else has been posted that the MAC filtering also covers the Guest Zone and therefore I have to stick them in there before they could simply log on with the current password? Is there any way to change/stop that without eliminating MAC filtration as a whole?
View 4 Replies
View Related
Jan 21, 2012
I am fortunate enough to have unlimited interwebs through my DSL ISP, and I occasionally have guests that come by who would like to use it on their mobile devices.My problem is that when my Guest Zone is enabled there is no internet access. Otherwise the Zone functions 'normally' devices within the zone can view each other, but not outside.It is important for me that the Guest Zone doesn't see any of the devices within my Host Zone.
DIR-655 - Rev B 2.03NA
Connection: PPoE
Reconnect mode: On Demand
Wireless Mode: Mixed G/N
View 3 Replies
View Related
Dec 22, 2009
On router Cisco 881 with ZBF I have dedicated VLAN for AP connection. AP is getting IP address from router dhcp server, I would like to limit all access to Router "Self" zone to only DHCP traffic if possible. How to limit all traffic except DHCP to self zone?What ever I do to traffic to/from self zone I must always specify last statement as "class class-default/inspect" and not drop as I would like to.
View 5 Replies
View Related
Apr 26, 2012
I'm trying to find a document in Design Zone about configuring a Wireless AP and I wasn't able to find it. I have a good experience configuring switches, routers and firewalls in CLI and this is the first that I have my hands on APs (1240 AG).
View 2 Replies
View Related
Jun 9, 2012
I have a Cisco 2901 which terminates a Class C address pool. I have split the Class C address pool into 3 sub-nets and 2 zones and created a non-addressable pool (private pool):
dmz-zone : x.x.x.0 TO x.x.x.127 (x.x.x.0/25)
in-zone: x.x.x.128 TO x.x.x.159 (x.x.x.128/27) & x.x.x.160 TO x.x.x.191 (x.x.x.160/27)
private-zone: 192.168.x.0 TO 192.168.x.255 (192.168.x.0/24)
I have configured private-zone NAT to use address pool x.x.x.161 TO x.x.x.189 within the in-zone.
Within the:
dmz-zone - are servers for : DNS, Syslog, SIP & HTTP/HTTPS in-zone - is a SMTP mail server which is behind VPN Gateway/NAT, TomCat (Application Server) and PostgreSQL Server private-zone - is where all standard users are operating from and they can access the SIP & HTTP/HTTPS servers within dmz-zone My problem is that I cannot seem to configure the ZBFW to allow the dmz-zone HTTP/HTTP server to redirect to in-zone TomCat server.
I do not want to make the TomCat server generally visible and am instead using the Apache proxy/ajp13 to connect from dmz-zone server to in-zone server.However I cannot seem to get anything (including icmp) to work from dmz-zone to in-zone.
I have Policy:
POLICY-DMZ-IN (dmz-zone to in-zone) which has:
any any udp/tcp inspect
any any icmp inspect
unmatched traffic DROP/LOG
But I still cannot get anything from dmz-zone to in-zone...Could the POLICY-DMZ-IN be being overridden by other dmz-zone to out-zone policies?
NOTE: I have routing rules for each of various sub-nets and all out-zone to dmz-zone, out-zone to in-zone and private-zone to out-zone, in-zone and dmz-zone routing works ok, so it appears problem is with ZBFW not routing table.
View 4 Replies
View Related
Aug 26, 2012
I have this guest wlan working with web authentication, as you may know in order to get authenticated you must have an IP address first then have a valid username and password. The problem is that if you don't have valid credentials you keep the IP address anyways.I'd like to know if there is a way to release the IPs that are not being used? The WLC is the DHCP server for this network.
-WLC4402
-6.0.202.0
View 6 Replies
View Related
Aug 6, 2012
This is rattling my brain. I have configured 2 SSIDs, one for internal, one for guests. They are on seperate VLANs (50 and 51) and bridge groups (1 and 2). I can get IPs via DHCP for the internal network, but not for the guest. I can't get DHCP for any VLAN 51 sub-interface, nor clients that connect to it. The overall goal is to keep all traffic on the guest network seperate from the internal traffic, however, DHCP requests will be from an internal server. I have removed all the access-lists for troubleshooting purposes. AP and Switchport configs are below!
AP Config
Current configuration : 4011 bytes
!
version 12.4
[Code].....
View 6 Replies
View Related
Oct 6, 2012
I have an existing setup consisting of:
Windows Server - doing DHCP for private wired/wireless
Cisco 1141 Autonomous WAP with only private wireless access.
ASA 5505 (with very basic licensing)
HP switch
The customer wants to have guest WiFi.
The guest WiFi is going out to the internet via a seperate VLAN/interface on the ASA. Can the 1141 do DHCP for the guest WiFi? Or do I need to do it via the ASA?
View 1 Replies
View Related
Feb 24, 2013
I have a cisco wlan controller (2100) running software 7.0.235.0. I have the internal private wlan running off of port 1 and that is working fine with an internal dhcp server.Is it possible to setup another ssid (guest) and have the interface directly linked to a static ip on the WAN and also use the built in cisco internal dhcp server?
View 4 Replies
View Related
Feb 28, 2013
i have two 5508 ver 7.3.0, one is the primary and one is the guest controller. mobility is up and running. i have an exising guest ssid working with wpa2-psk and web authentication and its working fine but i require a second guest ssid that only uses a wpa2-psk for ipod/ipads as i cant use passive client on primary controller. i presently have the one vlan range and dhcp setup on the guest controller to give addressing to either ssid. i know you can have multiple ssid setup on the guest controller but in other sites i have only had one guest connection comming from the primary controller, just a primary controller on each sites was only creating one link to the same guest controler.
View 3 Replies
View Related
Mar 15, 2012
My router a E4200. the thing is i want to disable the dhcp services from the router, because there are allready a dhcp server in my network. but if i disable the dhcp will the Guest wifi functions still work?
View 3 Replies
View Related
Jul 3, 2012
I've got an E4200v1 running 1.0.04 firmware with guest access enabled. I'd like to find out who is logged in using the guest access. Is there a way to get a list of the DHCP clients on the guest network? I'm able to do this for the non-guest access via the WEB interface's Status->Local Network->DHCP Clients Table page. But I can't find a similar table for the guest network.
View 3 Replies
View Related
Feb 3, 2013
I just read that starting from version 7.4, the 2500 controller can be used to terminate guest anchor tunnels. have a question regarding the performance of the internal DHCP server when used in guest environments.
View 1 Replies
View Related
Feb 23, 2012
In our test set up, we have two WLC 5508 Controllers connected via Checkpoint UTM-1 firewall Inside and DMZ Interfaces. Both the WLC controllers are connected to the firewall via Cisco 3750 switch. On the Local (Inside) Controller, guest SSID is enabled and attached to the wireless management Interface. On the remote anchor controller, guest SSID is enabled and attached to the Management Interface as well. The following configs are replicated on both the Controllers.
SSID Name - guest
Interface - Management ( VLAN 10 on Local and VLAN 20 on remote) -
Mobility Group: Same configs at both ends
SSID Anchor : Anchor SSID on local and local SSID on Anchor.
AP: CAPWAP 3502 Management Subnet
[code]....
Is there any thing missing in the wireless configs and or the firewall rules as i could not see DHCP request back from the Anchor Controller. Also, after DHCP is obtained, the web authentication request will be redirected to an Amigopod device for authentication. In this case is the redirect URL congiguration to be performed only on the Anchor Controller or is this to be replicated on both the Local and Anchor Controllers.
View 8 Replies
View Related
Oct 30, 2012
with our WLC 5500 controller, once the clients get the DHCP address the page is not redirecting them to the guest portal.What is the best way to check as to why the redirection is failing.
View 8 Replies
View Related
Mar 6, 2012
So have a wireless guest network on an N600 router. Here is my setup:
pf sense -> untangle -> switch <- N600
the N600 is just an access point and does no DHCP. The primary wireless network gets IP no problem but the guests are not getting an IP. I'm assuming the N600 has no way of issuing an IP on the guest network. how to set a DHCP server on the guest network and have a static route to the pfsense firewall from that network.
View 10 Replies
View Related
Jun 26, 2012
I have set up a zone-based policy firewall with HA on two 2911 routers as per the Cisco security configuration guide, for an active/passive LAN-LAN cluster. All works as expected, but there is one problem I find: when the control link between the two devices fails, they go into an active/active state as each member assumes it's the last surviving member. The ARP entries for the Virtual IPs on the neighboring devices point to the device that last claimed the active role (usually the standby device). This works in a way, just sessions don't get synched anymore (control link is the same as data link). Now when the link comes back up, the preemtion works and the active, former standby device goes back to standby. But the ARP entries on the neighboring devices still point to the standby device and nothing goes (also sessions established during the active/active state are lost due to resync with the now active member).
This is a single point of failure and what I need is a way to mitigate that. Under:
redundancy
application redundancy
group 1
control <interface> protocol 1
only one control interface is allowed. Other manufacturers with similar functionality provide for the possibilty of a backup control link, for example the internal LAN interface or a dedicated backup link.
How would I go about that? Maybe use a port-channel for the control/data link (but I'm out of interfaces)?
View 1 Replies
View Related
Feb 3, 2011
Our Guest access system seems to be having problems with DHCP. It seems to take a while to deliver an IP address making the client device show the "limited or no connectivity" message, which of course makes the users complain. On one occassion I have seen my own client eventually picking up an address even after the limited connectivity message appeared. On another I saw the debug showing "Dhcp request for autoconfig address", which I suspect is a symptom of the problem.
Our Anchor Controller is the DHCP server and is a 4402 running 7.0.98.0 - I've attached some DHCP packet debug.
View 6 Replies
View Related
Jan 28, 2012
I have 2 x Redundant Guest Anchor Controllers (5508) located in 2 separate Data Centers with all the management and guest user VLAN spanned between two. Everything is working fine with the Guest WiFi access except the DHCP functionality as the Controllers are acting themselves as the internal DHCP Servers.
This is how I tried to distribute :
network. 10.1.0.0/23
gateway: 10.1.1.254
Controller 1, DHCP Server pool: 10.1.0.2 - 10.1.0.254 Gw: 10.1.1.254
Controller 2, DHCP Server pool: 10.1.1.2 - 10.1.1.254 Gw: 10.1.1.254
As the user load balancing between the Anchor Controllers cannot be controlled (i.e. they are active/active), the same client sometime getting 2 different IP addresses from both the Controllers (as they do not talk to each other in terms of DHCP) hence depleting the pool addresses.
I guess one way of solving this is to just run 1 DHCP server in one of the controllers but that defeats the purpose of having N+1 Controllers. Is there a better way of doing the DHCP load balancing and having full redundancy at the same time?
View 3 Replies
View Related
May 30, 2011
I have a Cisco ASA 5500 as the main router with a DIR-655 as a wireless access point behind it. DHCP is turned off on the 655 as the ASA is providing DHCP. This worked great for about a year and now suddenly, without any changes, I'm having problems. The only thing that connects without a problem is a laptop, which shows up on the device list with an IP. Other devices have problems. iPhones connect, show an IP on the device itself, but when listed in the connected list on the 655 show no IP. The connection is super slow. An Airport Express will connect, but again, shows no IP in the connected list on the 655. Using the ethernet cable from the Airport Express, nothing can get an IP. I can live with the iPhone not connecting, but the Airport Express not connecting is a major problem. Any reason why this would just stop working one day?
View 2 Replies
View Related
Oct 17, 2012
Any problems with the guest network on the ea4500 with the cloud firmware? I am losing guest clients after about 24 hours and the re-authentication fails. you enter the guest password and nothing happens until you reboot the router.
View 2 Replies
View Related
Apr 13, 2013
Region : UnitedStates
Model : TL-WDR3600
Hardware Version : V1
Firmware Version : TL-WDR3600_V1_130320
ISP :
Has anyone gotten the Guest Network feature to work from the new firmware TL-WDR3600_V1_130320?I have my WDR3600 setup as an access point:TPLINK with static IP address connected via ethernet cord from the LAN port and connected to the main Verizon FIOS router which distributes DHCP IP addresses to the netwrok. Can not get the Guest Network feature to work - I see the guest SSID I created but when I connect to it, the IP address assigned is in the 169. range meaning it does not get to my main router.It may be because I have the TPLINK setup as an access point, so are there any people who have gotten Guest Network work either with the TPLINK as the main router or as an access point?
View 1 Replies
View Related
May 27, 2012
My DIR 655 is refusing to act like a router and more like a normal switch. Anything involving the router side of things(DHCP,firewall,wireless, etc) does not work.
Basically when it powers up the blue power light comes on and that's it. If I plug my cable modem into the wan port then this light comes on with nothing else. If I then proceed to plug a cable into Lan 1 I get the address of my cable modem assigned to my computer and all internet access is fine. As opposed to being assigned an address from the router's DHCP. If I plug a cable from another router into any of the lan ports on the DIR 655 then I get assigned addresses from that router's DHCP and all internet access is routed through.
View 1 Replies
View Related
Nov 15, 2012
Region : Thailand
Model : TD-W8961ND
Hardware Version : V1
Firmware Version : 2.0.0 Build 111111 Rel.1111
ISP : 3bb
I have a problem when I am trying to add another static ip address to the list
the message above in title pop up, how can I fix it?
DHCP Table is Full!
View 1 Replies
View Related
Feb 25, 2013
Region : Australia
Model : TD-W8960N
Hardware Version : V4
Firmware Version : TD-W8960N_V4_130205_Beta
ISP : TPG
I have an Optus Home Zone (mobile cell tower) that requires ports open.
Port
123 UDP
500 UDP
4500 UDP
I have assigned the Home Zone a Static IP outside the DHCP range and set the above Ports on the NAT, Virtual servers to that IP address.
I have used nmap to scan the ports and it provides open/filtered status for all of them.
Here is the kicker for me, i use a DGN3500 netgear (which keeps dropping WiFi hence its replacement) and enter the ports and it works straight away. Un plug and put the Tp-Link and nothing.
I use Eset Smart Security, could that be the problem?
View 1 Replies
View Related
Apr 16, 2011
I've been fighting the Rev A4 HW and 1.3x firmware stability issues. I would like to try the 1.21 firmware, but I use the guest network feature. The unofficial backrev'in instruction look to be a PITA... and I just would like make sure the guest network feature exists in the 1.2x firmware before I got through the trouble.
View 2 Replies
View Related
