D-Link DIR-600 :: Very Limited Connectivity Through Router
Dec 26, 2011
I just bought a D-Link DIR-600.After I went through the setup wizard, I was able to get an internet connection, but it was useless (google search very slow, but connected). This was fixed when I disabled NAT, but that meant no other computer was able to access the internet through the router. This has all been wired. I still haven't setup the wi-fi.
H/W Version B2.
F/W Version 2.03
Internet connection is ADSL2+ through a NetGear DM111P. The modem is setup as PPPoE Bridging.
View 2 Replies
ADVERTISEMENT
Oct 13, 2011
I have an Acer Aspire 5315 running windows vista home basic, version 6002.For some time i have not been able to join wireless networks, but used a long ethernet cable to my room in shared house. yesterday we got a new router and have had to use it wirelessly. it is a talk talk D-Link DSL 2780, and al other housemates are on wirelessly. mine links up (sometimes) but says local only or limited connectivity - both of which mean i cannot connect to the net wirelessly.
View 3 Replies
View Related
Nov 22, 2011
I had to reset my Linksys WRT300N router because of issues with my internet provider and now I cannot get my Dell Inspiron E1405 to connect wirelessly. I am getting a status of limited or no connectivity with an ip address starting with 169. I have included the following:
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows XP Professional, Service Pack 2, 32 bit
Processor: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz, x86 Family 6 Model 15 Stepping 6
[Code]....
View 10 Replies
View Related
Feb 18, 2013
I connected my desktop with n300netgear -router. It was working fine until I reset it.After that I am facing this problem of not able to access internet. It shows limited or no no connectivity. But when I plug the internet cable directly to my desktop its working fine. When I connect it via router.
C:Documents and Settings
agaraj>ipconfig /all
Windows IP Configuration[code].....
View 7 Replies
View Related
Feb 22, 2011
i have a BEFSR41 v3 firmware v 1.05.00 - i have been usuing it for at least 7 or 8 years now - at one time i had 3 computers hooked up and they all three worked fine. Now i have 2 plugged into the router - both are xppro machines - the one i am now works with no problems. The other computer however has the limited or no connectivity problem.I used this router for years without any problems then one day this ip conflict message started to appear.Then one day i started getting this weird ip conflict message on both computers but only occasionaly - it never caused any problems - if you ignored it - it would simply go away.Then one day computer #2 got the limited or no connectivity message - i simple reboot fixed it. This solution worked several times. Computer #1 has never had any problems.
Sometime later the limited or no connectivity problem reappeared and this time a reboot did not work - i searched for a fix and decided to try changing the link speed from auto sense to 10mb half duplex - this solved the problem. This solution worked several times.Sometime after that the limited or no connectivity reappeared and after some searching i upgraded the routers firmware - this solved the problem.Sometime later the limited or no connectivity reappeared and this time i had to actually uninstall the NIC, reboot and then let it redetect the NIC and then the problem was fixed. This solution worked several times.Sometime later the limited or no connectivity reappeared and the previous solutions did not work to fix it - after searching for a fix i discovered that i could simply unplug the router and the plug it back in and this would solve the problem. This solution worked many times.Sometime later (wich brings us to 3 or 4 months ago) the limited or no connectivity reappeared and this time after searching for a fix i was able to fix it by updating the NIC drivers. Problem solved.This brings us to now - the limited or no connectivity has reappeared and none of the previous fixes correct the problem.When i originally set everything up it worked immediately out of the box.
DHCP is enabled - everything is set to obtain an ip address automatically.At first the event viewer reported The IP address lease 192.168.1.100 for the Network Card with network address0xxxxxxxxx has been denied by the DHCP server 192.168.1.1. {The DHCP Serversent a DHCPNACK message}.Now the even viewer just tells me it is using ip address 169.254.xxxxxx - (not the exact message but i didn't wanna go back and look)I have tried all of the previous fixes to no avail. I've tried shutting everything off and turning everything back on - i've tried resetting both the modem and the router - i've tried upgrading the firmware again. I even downloaded LELA and installed it on both computers thinking maybe it would detect and fix the problem buy no such luck. LELA simply tells me that computer #1 is working normally. On computer #2 when i installed LELA the first thing it did was try to find the router and it tells me it cannot find it.I.ve tried ipconfig /release and ipconfig /renew - i've tried it one after the other and also a reboot in between. I've tried clicking on repair in the LAN status - i've tried even tried different cables and switching ports on the router.
View 9 Replies
View Related
Jul 10, 2011
I recently bought a WRT120N Linksys wireless-N Home router but i have major problems with it getting to work.
Everyday i turn my laptop on i get either the message "limited connectivity or it doesnt find the wireless network at all" Same for my girlfriends laptop. Strange thing is after i reboot the router by taking the power off the laptops connect and have no problems anymore. It is quite annoying to have to reboot the wireless all the time so i would like for it it to work properly.
Connected through cable are my xbox, mediacentre and deskptop who do not have any problems staying connected to the internet. It is only the wireless that is giving me troubles.
View 3 Replies
View Related
Feb 25, 2011
I have a linksys router(befsr41 v3) with the latest firmware(1.05.00) - i have been using it for at least 7 or 8 years now - at one time i had 3 computers hooked up and they all three worked fine. Now i have 2 plugged into the router - both are xppro machines - the one i am on now works with no problems. The other computer however has the limited or no connectivity problem.I used this router for years without any problems then one day this ip conflict message started to appear.
I started getting this ip conflict message on both computers but only occasionaly - it never caused any problems - if you ignored it - it would simply go away.Then one day computer #2 got the limited or no connectivity message - i simple reboot fixed it. This solution worked several times. Computer #1 has never had any problems with the internet connection.Sometime later the limited or no connectivity problem reappeared and this time a reboot did not work - i searched for a fix and decided to try changing the link speed from auto sense to 10mb half duplex - this solved the problem. This solution worked several times.
Sometime after that the limited or no connectivity reappeared and after some searching i upgraded the routers firmware - this solved the problem.Sometime later the limited or no connectivity reappeared and this time i had to actually uninstall the NIC, reboot and then let it redetect the NIC and then the problem was fixed. This solution worked several times.Sometime later (wich brings us to 3 or 4 months ago) the limited or no connectivity reappeared and this time after searching for a fix i was able to fix it by updating the NIC drivers. Problem solved.
This brings us to now - the limited or no connectivity has reappeared and none of the previous fixes correct the problem.When i originally set everything up it worked immediately out of the box.DHCP is enabled - everything is set to obtain an ip address automatically.At first the event viewer on computer #2 reported The IP address lease 192.168.1.100 for the Network Card with network address 0xxxxxxxxx has been denied by the DHCP server 192.168.1.1. {The DHCP Server sent a DHCPNACK message}.
Now the even viewer just tells me it is using ip address 169.254.xxxxxx
I have tried all of the previous fixes to no avail. I've tried shutting everything off and turning everything back on - i've tried resetting both the modem and the router - i've tried upgrading the firmware again. I even downloaded LELA and installed it on both computers thinking maybe it would detect and fix the problem buy no such luck. LELA simply tells me that computer #1 is working normally. On computer #2 when i installed LELA the first thing it did was try to find the router and it tells me it cannot find it.
I tried uninstalling the NIC and removing the drivers, rebooting and then reinstalling them. No luck.
I tried setting a static ip on computer #2 with no luck. When i did these two error messages appeared in the event viewer of computer #1---
The master browser has received a server announcement from the computer (computer #2) that believes that it is the master browser for the domain on transport NetBT_Tcpip_{0876E9A8-C6E. The master browser is stopping or an election is being forced.
The name "MSHOME:1d" could not be registered on the Interface with IP address 192.168.1.100. The machine with the IP address 192.168.1.20 did not allow the name to be claimed by this machine.
If I ping the router from computer #2 it comes back 100% loss.
If I ping the NIC it comes back 0% loss.
I might also add that I can see both computer #1 and #2 in my home network workgroup on both computers. I've tried ipconfig /release and ipconfig /renew - I've tried it one after the other and also a reboot in between. I've tried clicking on repair in the LAN status - I've tried resetting the ip stack with the netsh command - I've even tried different cables and switching ports on the router.
View 12 Replies
View Related
Aug 6, 2011
I have Vista Home on a laptop (all up to date) and when I try to set up wireless connection using a key it goes to 25% then times out. When I try to manually set up a connection I get limited connectivity and no internet. I have one other laptop with Win 7 and this connected with no problems, also one desk top connected with no problems. Kept getting the error 82BD0119 on the Vista laptop.
View 5 Replies
View Related
Feb 1, 2012
I'm seeing some weird behavior trying to connect my Windows XP SP3 desktop via a USB wireless to my Windows network via Linksys WRT120N Router. It is unable to connect with DHCP. "Limited or No Connectivity" is shown on the network icon and no internet connectivity is present. When i manually assign a static IP, i am able to get connectivity to browse the internet, and I am able to ping the other computers in my network, but I am unable to view the windows workgroup. I am able to manually map network drives, but those drop continually. There seems to be no rhyme or reason to the connectivity and the dropping while I am using the static IP. DHCP does not work at all. I'm just trying to get this computer connected to the windows workgroup so that I can map network drives and printers once and for all. Right now the rest of the network (ethernet cabled to router) works fine. I'm thinking it may be something in the routers wireless config, as I am having the same issues (DHCP not working at all, static IP working but constantly dropping) with a Mac laptop.
View 3 Replies
View Related
Nov 13, 2009
I have been using this router fine for a year now. Now I can only get on the internet if I am directly plugged into the modem. It says I have limited connectivity. My ISP is Comcast. I have tried resetting the router with no luck. I have tried to update the drivers but I cannot even log into 192.168.1.1. I am in dire need of the wireless cpability. When I go to the run command and type ipconfig it tells me I have no default gateway.
View 9 Replies
View Related
Mar 4, 2013
I am having trouble with a Vista Dell Inspiron 1525 laptop that says it is connected to my Linksys router, but has limited connectivity. It's this way with both a wired and wireless connection. I have 4 other computers in the house that all connect with no problems. The Dell laptop connects in safe mode, but won't connect when in normal mode
View 1 Replies
View Related
Jul 23, 2012
I have been having some gripes with the above problem for the past few days, connecting several PCs in my office into a network. To cut a long story short, it's a bunch of XP SP2 and SP3 machines with only some of them having these issues. The network consists of two switches and one router with integrated modem and wireless. Internet access is established over that router/ ADSL modem.I have drawn out all the cabling and made all the connections myself, I don't doubt network related hardware one bit. Basically, I had the problem on two PCs, I tested connectivity on that cable with a laptop which didn't have any problems connecting to the network. All the cables are brand new, "straight" connectedC
View 14 Replies
View Related
Mar 17, 2011
i did this and the sign of unable to connect went away, restarted back to it, did it again and it goes away but still no connection. TCP/IP stack repair options for use with Windows XP with SP2.
View 8 Replies
View Related
Sep 3, 2011
my internet is not working on my PC (XP) however the wifi in my house is still on (i can use laptop with functioning internet). The internet status say's "limited or no connectivity" and shows a yellow triangle with an exclamation point in the middle.
View 19 Replies
View Related
Sep 9, 2011
I manage a small office network IP's are generated via a rooter. I need to add a new pc to the network and here is where the problem starts.I have a cable from a HUB in that office which has a splitter 1 way goes to a PC the other is empty. At first i tried connecting the other PC from that splitter but i get the Limited or no Connectivity message on both PCs. If i connect only one of them to the splitter the connection works fine.Now i tried with a HUB, made a Crossover cable from the splitter to the HUB in the WAN port, same deal both PCs get Limited ot no Connectivity. THe strange thing is that if i connect only one via the HUB the same thing happens.I am really out of ideas, my only option left is to connect the PC from the main HUB which means allot of cable posing.
View 3 Replies
View Related
Oct 3, 2011
When using an Ethernet cord, I have no problems connecting to the internet. Also, my iPhone and my Wii have no problems connecting (wirelessly). However, I can't get any laptops to connect to my wireless. I have tried three different laptops and get the same problem, that it can connect to the network but limited or no connectivity.
View 1 Replies
View Related
Aug 28, 2012
I have a spare computer I build. Its a FX-60 on some old asus 939 motherboard. I installed xp in it because I don't have any wireless network adapters that work with linux or Windows 7.I am using an old Linksys WUSB11 Ver 2.6. USB adapter.The computer does have connectivity if I plug in an ethernet cord from the router. Worked fine, fast, was able to install Sp3, etc.I can't get the wireless to work. I get excellent connection strength, but can't actually do anything with it.Since this is XP and I haven't messed around with XP network settings for years, I think I got a bit rusty and spoiled with Windows 7.
View 6 Replies
View Related
Oct 19, 2011
Limited OR No Connectivity.
View 1 Replies
View Related
Jul 19, 2011
used to use Ethernet connection on this pc for 2/3 years, i recently ran wireless for like 2months. every time i try and use Ethernet i get limited or no connectivity warning, I looked in my ipconfig, i notice theres no physical address or default gateway for my realtek rtl8139/810x family fast Ethernet.
View 4 Replies
View Related
Sep 9, 2011
I got the urge to play a Windows game, so I used my restore disks to install XP on my Acer Aspire One A150. Unfortunately, my wireless card does not work anymore (?). I am dual-booting with Ubuntu 10.10 at the moment and my wireless card works there with no problem.I get a Limited or No Connectivity error every time.I'm connected to a router, which I have reset and works okay in Linux. I am connected currently using a USB D-Link N-Adapter, however, despite being "N" is considerably slower and inconvenient.
[code]...
View 13 Replies
View Related
Apr 19, 2011
I just installed a new NIC after troubleshooting old NIC and I am still receiving limited or no connectivity error. I checked router, cable modem & cable; all work fine.
View 13 Replies
View Related
Jan 25, 2013
I got this message and I went up to the " Start-Run_CMD-IPCONFIG and this is what I got Ethernet adapter Local Area Connection Media State....... Media Disconnected,Ethernet adapter Wireless Network Connection
View 1 Replies
View Related
May 27, 2011
I've searched the forums and found similar problems that relate to mine but after trying done of their solutions with no success I decided to make a new thread. This problem started 2 days ago with the same network I've been using for about 2 months.I'm running vista sp 1. I use google chrome and when I try to open a page it says unable to connect to proxy server. I changed the lan setting s (unchecked the box for using a proxy server for my lan) and now the page says the dns lookup failed.
View 1 Replies
View Related
Jun 30, 2012
I have a laptop running XP that will connect to the router wirelessly but not the internet. We have a static/fixed IP that I think may be the problem. Im not sure what the IP address is. Do I need to manually enter this (and DNS settings) into wireless connections > properties > TCP/IP, Microsoft Windows XP [Version 5.1.2600] (C) Copyright 1985-2001 Microsoft Corp.
View 9 Replies
View Related
Jan 30, 2012
I usually bring my laptop to classes to do homework during my free period and it connects through ethernet no problem. Today, randomly it says theres limited connectoin (no internet connection), but there's numerous other people here with laptops who are connected through the ethernet or wireless network, and their having no problems. I've already tried shutting my computer down and that didn't work, and since this is a school, the internet connection has to be steady, etc. What can I do to fix this?Some details about the laptop[CODE]
View 7 Replies
View Related
Oct 23, 2012
My desktop PC ran Vista Home Premium and about over a year ago, suddenly developed the dreaded, 'Limited Availability' connection error when I tried to connect via ethernet cable to my D-Link dir 615 router.I have tried all possibilities (detailed in the other forums I have posted this issue in), like all the ipconfig commands in the CMD prompt, rebooted modem and router and pc but still getting this issue. [codde] As you can see - the Belkin wifi dongle connects fine, with an IP address of 192.168.0.101, however, the SiS191 ethernet controller (which has current and up to date drivers) refuses to connect and gives an IP of 169.254.241.0.I have also tried copying the settings from the wifi dongle and manually entering them for the ethernet connection but this also does not work..I don't think its an issue with my router as I also have a laptop, connected via ethernet, which works fine. Also have 2 iPhones, 1 iPod, 1 iPad, Xbox and Wii which ALL connect to the same router (via wifi) without any issues.
View 5 Replies
View Related
Aug 16, 2012
We had a lightning strike near the house and it fried my NIC card (or so I thought), also my power strip. I replace them both along with my Ethernet cables. My internet intermittently goes out, every couple of minutes. I keep getting pop ups saying "Local Are Connection has limited to no connectivity" and/or "a network cable is unplugged".
View 5 Replies
View Related
Oct 25, 2011
We have netgear router and 3 laptops which were all working on the internet fine but one laptop has had a full recovery done on it and now won't connect it just says there is limited connectivity, what it could be as the net is still working through Ethernet and the other laptops through wireless. Its windows vista.
View 5 Replies
View Related
Jul 12, 2011
Okay so I have a dual boot computer(windows xp3 and Linux Ubuntu). The Ubuntu wireless works so that means my hardware actually works, but my windows xp doesn't connect. First I have the xp3 so my recovery disk from Toshiba some of the stuff is outdated. I installed intel chip-set, intel proset(my wireless) , wireless LAN, oh the stuff that have to do with wireless and still doesn't work. This is what happens, proset finds the router tries to connect and it says limited. I tried repairing it but nothing works. P.S. the stuff that are outdated are like the QFE ( those are a lot of files in my Toshiba recovery and every time i try to install them they don't work they say that the system I am using is better than the stuff i am trying to install)(QFE is also just the name in front of the file and there is at least 25+ , don't know why it is QFE)
View 3 Replies
View Related
Dec 11, 2011
I recently moved into a new apartment and when I connect to the router using the wireless. I get limited connectivity, it accepts the security key but can not get the internet. Connect wirelessly to another router within range and can connect to the internet via that. Also if I connect a ethernet cable to the router it gives me internet access. I couldn't see any settings in the routers menu that would prevent me from connecting(but im probably being blind).
Two other guys I'm sharing the apartment with can connect to the internet wirelessly with no issues. The router is a Thomson TWG870UIR.
Windows Vista Ultimate OS.
Connection-specific DNS Suffix:
Description: Intel(R) Wireless WiFi Link 4965AGN
Physical Address: 00-13-E8-0D-82-4D[code].....
View 5 Replies
View Related
Feb 5, 2013
I am trying to share my internet conncetion with another computer. I am using a d-link switch. but I keep getting a limited or no connectivity message.
View 10 Replies
View Related
Aug 6, 2011
I have a couple of laptops on my home network and yesterday one of them stopped connecting to the internet. I was having some trouble with my sound cards and when I tried to automatically update the drivers my network connection cut out and now I cant get it to work correctly. All of the other laptops work fine.So initially I thought it was malware so I ran hijack this but i didnt see anything suspicious. I can see in ipconfig /all that the ip address subnet and default gateway are correct and I have the same DNS servers as the laptops that work fine. I can ping my router and the DNS server but not any of the laptops on my network or any external IP address.
View 4 Replies
View Related
Feb 19, 2012
recently my internet connection shows the status i mentioned.in cmd ,typed Ipconfig/all and all ip are 0.0.0.0, I Tried to renew the ip by ipconfig /renew it tells THE RPC SERVER IS UNAVAILABLE.and also tried to start DHCP CLIENT in services.msc and got ERROR 1068 : the depency service or group failed to start.
View 14 Replies
View Related
