I have a weird issue I have never seen before and am trying to get some answers. I setup a laptop for one of our employees who works out in the field. We typically login to the machine while on the network with a domain account. This is so the password gets cached and they can login to the machine once they receive it. I sent a laptop to this one guy (who is rather tech savvy-so I know it is not user error) and he could not login to the laptop using his network credentials. I was able to get him on his home network using his router, and I RDP'ed into the machine. When I was remotely connected, I was able to login to the PC with no problem. However, after I disconnected, he tried to login also and it kept telling him that the domain was not available? It wasn't even an "invalid password or login" error.I ended up creating another local account on the machine so he could work, but I am stumped as to why he could not login locally, but I could using RDP.
I have a very problematic situation here.I have configure on a Cisco 2960 the vty line in a wrong manner and now I am stock.To configure those vty to enable ssh I have typed :
line vty 0 4 login local password xxxx line vty 5 15 login local password xxxx exit
Problem, I work remotely (I was on telnet while doing this). I have no username configure as I thought that root user would work.Now when I issue an ssh to my switch, I always failed authentication.how I could recover access to my switch without being physically there ? I have write the config in memory, otherwise it would have been too easy.
We are wanting to use local database users to authenticate our SSH connections to our 6500 cores.
We have added the usernames and password into the 6500 using
username anameduser password astrongpassword or username anameduser secret astrongpassword
We where expecting the commands to be the same as other iOS devices example C3750 we would add.
Line vty 0 4 login local
And this would allow us to use the local user database to authenticate our ssh sessions.
The login local commands are not availbe on the 6500s and we have not found any documentation on how to impliment a local database for this purpose except in a CatOS 6500.
I have a need to allow a small group of users temporary level-15 access to several 6500 switches (running 12.2-33 SXJ2 code), but do not want to provide them with the enable secret password which is used on the rest of the network (over 1200 devices). I tried to eliminate AAA using the "no aaa new-model" command, but was told I could not remove aaa while there were active sessions, and "login local" no longer appeared as an option for vty lines. So, I created a local user database called "support" which I used to replace the "group" entry in the authentication and authorization sections of our AAA config and for login on vty 0 4. [The username is given a privilege level of 15 along with an individual password for authentication. (ex. user name jsmith privilege 15 password 0 xxxxx)] I modified our AAA configuration to support local login, but was unable to establish "enable mode" (i.e. # prompt) with any account. I can login locally, but only to a normal "user mode" (i.e. > prompt).Here is the current, unmodified and sanitized config for our AAA and line vty 0 4 sections. [code]
We've a Cisco ASA 5505 connected directly to Verizon FiOS Circuit (ONT) box using Ethernet cable. As per the existing documention that I have, the previous configured this as a dedicated router to establish a seperate VPN connection our software provider. They assigned both Public Static and Local Static IP address. When I try to ping the public IP address, it says request time out; so the public IP address is no longer working.
When I ping the local IP address of 192.168.100.11, it responds. The SolarWind tool also shows Always UP signal. How can I login into this router either from remotely or locally to check the configuration, backup and do the fimrware upgrade?
I also tried to connect my laptop directly to the ASA 5505 router LAN port. After 3 minutes, I'm able to connect to Internet without any issues. However I don't know the IP address to use to login.
I have a website account with fatcow. I created the website with Dreamweaver software and uploaded it to fatcow via port 21.My internet connection was via xplornet and I had no access problems. I upgraded to xplornet's new g4 system and now I can no longer access my account online or upload to my website.We have two computers. The first is a desktop system that has the dreamweaver software. The second is a laptop which connects wirelessly. We share the signal through a dlink router. The modem is a viasat Surfbeam 2 residential satellite modem.1. When I attempt to login to the fatcow control panel, the tab shows successfully authenticated and then re-directs me back to the login page. This happens on both the laptop and the desktop.
I have tried bypassing the router and the problem still exists.I took the laptop to the computer center and I can login to the account no problem.I used a free proxy server page on the internet and can login from my home system on my desktop no problem.I have completely turned off virus scan and firewalls. It doesn't work. I have tried IE7, Chrome, Firefox and they all have the same problem. The laptop runs IE8 and has the same problem.I can ping the page successfully. I can traceroute the page successfully. I can't nslooup any site at all. I get the domain not existant message.My ip and dns settings are the automatically find option.I have renewed ips and dumped the dns cache.Using alternate dns addresses doesn't rectify the problem. When I attempt to upload via dreamweaver, I connect but within seconds I get a Dreamweaver message that says "Connection to remote host has been lost. Click refresh to continue" and the log reads "FTP Error. Dreamweaver could not connect to server." I haven't taken my desktop anywhere to try to see if it works on a different network. I'm in a remote location (hence the satellite internet)and it is an hours drive to the nearest private internet connection and a 2 hour drive to the nearest public connection.
We have a Linksys WRT120N wireless router set up at one of our small offices. I noticed recently when trying to log in to the router to make some admin configurations that it will not accept the login credentials when trying to log in from IE10 browser. Works fine from Chrome, IE9, ect. logging in to a linksys router with IE10?
i'm trying to setup a local DNS server to manage small office local-only domain names for our servers. i have the DNS working properly (resolving local machines and using the ISP dns if it can't). so i put the DNS server ip into the "Static DNS 1" field of the router settings. the other 2 static dns fields are empty.the problem is that the router is still using the ISP dns server as the primary and my local dns server as the secondary. i verify this in two places. first, if i go to the "status" tab, DNS 1 shows the ISP server while DNS 2 shows my local DNS server. secondly, if i connect to the wireless device with a linux-based machine, the /etc/resolv.conf file shows the nameserver ips in the same incorrect order.
I want to make a career in networking.What does 3g stand for.is it different from 1G or 2g except that the speed is higher than the above two.And nowdays the USB modems that come out say 3g and also there are two kinds of speed 3.6Mbps and 7.2 Mbps.How come such a huge difference under the same kind of connection standard .And when 3g came out there was lot of hype.
When I start a web browser based application with a URL beginning with the 192 IP address. it runs as it should including the script dbscript.php which executes a MySQL commit unit.However when I start the application with the same URL but beginning instead with "localhost", it fails during the commit unit. It puts a blank screen up (rather than a Succesful or Failed commit screen) and leaves an error message in the Apache error_log indicating a problem with dbscript.php (which does the commit).I assume the 192 IP address is that of my modem. I assume that because the application will not start with the 192 URL if the modem is switched off. The application will start whether the modem is on or off if the URL begins with "localhost".I have checked all hosts files that are on the system and see nothing amiss there -- they are all defaults and no changes have been made by me.
Configuration:
Mac OS X v. 10.6.8 Apache v. 2.2.21 PHP v. 5.3.8 MySql v. 5.1.39
Just like the topic says i am wondering what is the difference between QOS and WISH on this router, as far i can tell they are both for traffic shaping but surely there must be a difference.Also will either allow for entire IP's/connections be prioritized over others or just specific applications?
First, I am lost between the differences between Port Forwarding, QoS and Application Rules...5 PC's online at same time playing Diablo 3. All lag terribly, and I see posts saying to setup QoS, then another says port foward, then another says setup application rules. I want any PC running D3 to have top priority and max bandwidth...If I try to set QoS, it has Protocol and Remote Port Ranges which I don't know what to put where.If I try to Port Forward, it only wants to let me use one IP address for the ports needed, plus I don't understand the difference between TCP and UDP settings.If I try Application Rules, it asks for a firewall port, which I don't know what to enter.Diablo 3 uses ports 80, 1119, and 6881-6999 I have Rev A2 with 1.21 Firmware and all my machines are on Win7. Should I upgrade firmware? If so, which one?
if my internet carrier supports both, why should I spend a little more to get a cable modem that has DOCSIS 3.0 support? What's the benefit over DOCSIS 2.0 (or 1.0)?
I need to set up a VPN connection between two branch offices and the main office (three nodes)From the specs it looks like CISCO881-K9 can do the job. What is the main difference between CISCO881-SEC-K9 and CISCO881-K9?Is Avanced IP security feature set required?
I am wondering what the difference in size of small, medium , large business network would be?Like say is 0 - 50 computers a small network 100 - 1000 a medium size network 1000 > a large network ?cOr are their other factors one most consider?
I am buying a new wireless router for my home, and in the tech specs it tells me the router has Ethernet ports. If I only have internet through an asdl port will I still be able to buy the router and use it via ASDL?
My daughters want a web cam for their room. I would like to be able to check on whats going on. We have a Linksys wireless router for the home. Is there software/hardware availible to allow monitoring the web cam traffic from our main computer.
I mean what are the benefits of using FTTH (fiber-to-the-home) instead of FTTB (fiber-to-the-building)? i.e. does it give better speeds, latency, etc...
I keep having pop-ups from my McAfee informing me that an unknown device is attempting or has connected to my network which I don't understand as my wireless router is encrypted with a password. My neighbours aren't likely to be technical enough to break this and the signal isn't exactly strong anyway so is unlikely to reach much further outside, that being said I always mark them as intruders. Now I continuosly get pop ups saying "a device you marked as introduer has connected to your network. Mcafee has blocked the device from accessing your pc". or words to that effect. what's the difference between this 'network' and my internet? I don't really understand what it's saying, I haven't set up any network that I know of... none of my computers are 'linked' so to speak.
What is the difference between AP, Client and Repeater. There is a switch on the back of my Access Point and I just wanted a little bit of knowledge of what they are and what are the best situation I would use them in?
I would like to know what is the difference between LAN cable and ethernet cable? Is both cable is same? can we use CAT 6 and CAT 5 cable as LAN CABLE?
I currently have a Motorola modem, which is unreliable so I want to upgrade. What's the difference between modems and routers an what should I get? I don't need any ultra high-end thing just a reliable modem/router for surfing the Internet and some light gaming (mainly COD4).