Laptop Unable To Acquire IP Address While Connecting To Network
Aug 20, 2012
12 hours ago, my laptop connected to my home's wireless network, no problem. The only event between then and the next time I logged in was that the ethernet cable was unplugged from the router, to be plugged directly into the Xbox. After it was reconnected, my laptop was recieving the signal, and the other home computers connect to internet just fine, but the laptop is locked out of the network. Error message when I click Connect:"Unable to acquire an IP address while connecting to Wi-Fi. Please check your settings and contact the system administrator if the problem persists."I have already tried restarting the computer, the modem, and the router. I do not want to reset the modem to factory settings.
View 1 Replies
ADVERTISEMENT
Oct 25, 2012
I use a PC at work and we are in the process of moving so we disconnected our internet early. For a couple weeks I need internet connection at work and found our neighbor who is allowing me access to their service. They gave me their password but when I try and connect it constantly says acquiring network address. My smartphone has no issue being connected.
View 1 Replies
View Related
Jan 15, 2012
Wireless internet has been working fine on my Dell Inspiron 1300 laptop for years, until last night. I am getting strong wireless signal but my wireless network connection can't seem to acquire a network address - it just tries and tries without success. I also am getting a message that I need to check the box labelled "Use Windows to configure my wireless network settings" but after I have done this, it eventually seems to uncheck itself after a while or upon reboot.
[code]....
View 7 Replies
View Related
Jan 7, 2012
About a week ago we had a virus on this computer. Ran malware and AVG and the computer worked fine. A few days after the virus was removed I could not get online or print to the printer that was hosted on this computer. It is a wired connectionUnder network connection, it says "acquiring adress" but it never aqcuires one. I typed in the IP address manually and that allows me to get online but I cant see the other computers on the network and they cant see this computer.
View 11 Replies
View Related
Jun 6, 2011
Just got my old laptop for my son to use , but when i try to connect it just keeps saying aquiring network address, but nothing happens. no good on laptop, but my other one works perfectly ok.
View 4 Replies
View Related
Jun 24, 2012
I changed my wireless modem yesterday and i was unable to connect over wireless for one pc which has win xp sp2. It was unable to acquire ip address. Working fine when connected through wire. I checked the forums and tried this:
"Now Go to Start/Run and type inetcpl.cpl and press enter/Connections/LAN Settings. Make sure all the boxes are unchecked. Now go to Start/Run and type ncpa.cpl and press enter. Right click the Local Area connection/Properties scroll down to Internet Protocol (TCP-IP)/Properties. Make sure Obtain an IP Address and DNS Server Address Automatically are both checked. Now go to Start/Run and type CMD and press enter. IN the Command Prompt type ipconfig /release and press enter. the IP Address changes to 0.0.0.0 Now type ipconfig /flushdns and press enter. Now type ipconfig /renew. Now type ipconfig /all. "
View 19 Replies
View Related
Mar 8, 2011
. The laptop can connect to the internet using the wifi card. However, it cannot connect to the internet when using the wired connection but it can be pinged from other machines at work. The NIC does not pick up a different IP address even after releasing and renewing the IP address through cmd. I have uninstalled and reinstalled the NIC. The NIC is working because when I set a static IP address the machine can connect to the net. Using DHCP it goes back to that same IP address. I have tried a winsock repair as well with no go, as well as taking the machine off the domain and re-joining it. Anyone see this before? Is there something I can do on my end to get a different IP address through DHCP or do I have to get a Network engineer involved? This is a machine on a corporate LAN.
View 3 Replies
View Related
Jan 21, 2012
For awhile every now and then my computer decides it needs to 'acquire network address' on booting up. It never does succeed unless prompted by my going into Wireless Connections and pressing 'repair'. Yet my connection to the Internet is not impeded even while the little yellow ball hovers round mini monitor in the taskbar. It is hovering now as this thread is written. ipconfig reveals Connection Specific DNS suffix is missing, but the IP Address is there. My ZyXel 7087 router shows a fixed W/LAN/WPS and DSL light, but the Internet light is continually flickering, regardless of whether the computer is on. The TCP/IP is set to,'Obtain an IP address automatically' and 'Obtain DNS server address automatically'. Advanced TCP/IP Settings shows DHCP Enabled. DNS tab - DNS server addresses box is blank 'Append primary and connection specific DNS suffixes' is dotted and 'Append parent suffixes of the primary suffix' is ticked. 'Append these DNS suffixes (in order)' is unchecked. WINS addresses box is blank. 'Enable LMHOSTS lookup' is ticked. NetBIOS setting - Default (checked) - Use NetBIOS setting from the DHCP server. If static IP address is used or the DHCP server does not provide NetBIOS setting enable NetBIOS over TCP/IP. Enable & Disable NetBIOS over TCP/IP unchecked. While reading the WNC status the computer has found the Network address, but all above remains true.
View 5 Replies
View Related
Mar 6, 2011
I am using an Linksys WUSB100 ver 2 to wireless connect to a TrendNet Router WEP-652BRP.The router is using WAP 2 encryption. Everytime I try to make my wire less connection I get "acquiring network address" all the time. I usually fail to make a connection. Could the problem be signal strength?
View 7 Replies
View Related
Jul 14, 2012
I have a dell inspiron e1505 with a dell wireless 1390 wlan mini card and I recently used the installation disc that came with the laptop to install a fresh copy of windows xp on an empty partition. I have installed all the latest drivers, also. The problem is that I can connect to my WiFi network but it is stuck on acquiring network address. I have tried releasing and renewing the ip in command prompt, reset winsock, and have mad sure all the correct services are on automatic and are started.
View 27 Replies
View Related
May 25, 2012
My network key was changed recently, and it took a few tries for my laptop to connect, but when it did it was fine. Then the key was changed again, and now my wireless is wonky. Sometimes it can't find the network, other times it will find it but then can't acquire a network address, and if it does manage to connect (sometimes it will as soon as I click 'Cancel' when it's taking forever to get the address) it starts slowing down and then speeding up again. The settings have not changed on anything, other than the network key.
View 1 Replies
View Related
Jan 31, 2012
Have an old laptop running XPSP2 with a WPC54G V1.2 card that I use for email when traveling. Had no problems accessing my old home network that ran off of a WRT54G V 5.0 wireless router, nor with any of the "motel wireless networks" when I travel. I changed ISPs and now have an Actiontec PK5000 wireless router.
When I attempt to connect I get an error message "unable to acquire network address."
This new router has the following 64 bit and 128 bit settings
wpa-wpa2 personal
wpa personal
wpa2 personal
wep
security off
Using any of the security settings I get the error. Turning off security allows me to connect fine.
I realize this is a pretty old wireless card so is it possible it doesn't work with the current encryption standards but I would have thought that wep would have worked. The driver for the card is V3.3.15.0 which is also old. Would updating the driver work and if so what driver? If a new card is the only way any recommendations for an inexpensive card?
View 1 Replies
View Related
May 6, 2013
My grandma has a Dell Inspiron 1520 running Win XP and has a Dell Wireless 1505 Draft 802.11n W LAN Mini-Card. The other day I reformatted her computer for her to clean things up and since then I have been unable to connect to the internet. Her computer will recognize the wireless network and connect to it but after a few minutes of trying to authenticate network address it will pop up a little window that says "limited or no connectivity." I've read countless forums on the internet using my computer and have come to the realization that it's an invalid ip address. In one post I read someone provided an ip address, subnet mask, default gateway, and a preferred DNS server code that I typed in which then showed that I was connected with wifi but still says authenticating on the WLAN card.
View 3 Replies
View Related
Dec 19, 2011
I have a high speed wireless DSL router from my ISP (Telus). I use one port off the router to connect directly to my desktop computer. Another port is connected to a switch to which ethernet cables to three other rooms are connected. My problem is that when I connect my Bell PVR (9242) to the 'switched' ethernet cable, I'm apparently not able to get a dynamic ip address, which the Bell unit requires, and can't connect to the network.can I connect another router, in place of the switch, to deliver dynamic IP addresses to whatever I connect to the ports in the other rooms in my house?
View 2 Replies
View Related
Oct 29, 2011
My PC was working fine until yesterday. Now it keeps saying "acquiring new ip address". I have contacted provider and internet works fine, wireless laptop connects with no problem.
View 1 Replies
View Related
Jul 6, 2012
I have 2 computers that cannot/will not acquire an IP address from my DLink router.There are 2 other computers that aren't having any problem at all...so I assume that it is not a problem with the DHCP service of the router. The 2 computers are laptops: one netbook running Windows XP and another standard laptop running Windows Vista Home Premium x86. Both computers are running McAfee and I have scanned with McAfee and Malwarebytes, and both are malware-free (no infections were found on either system on first scans...so it's not like I'm dealing with a system that has had infections removed). When connected to the network, they attempt to acquire an IP address, but cannot for some reason and then Automatic Private IP Addressing takes over and they come up with a 169.254.x.x address. I cannot figure out why this takes place, as I have gone through Winsock repair, uninstalled and reinstalled both network adapters (ethernet and WLAN) on both laptops and nothing seems to make a difference. I have even tried disabling APIPA by adding the "IPAutoconfigurationEnabled" DWORD value in the registry......still the same. I have manually configured the adapters with a static 192.168.0.x address, and I can begin to communicate on the local area level...but still cannot establish any kind of Internet connection.
View 19 Replies
View Related
Jan 6, 2012
Have Belkin F507632-4 router on Desktop that has worked for 5 years with 3 other laptops in the house. Suddenly wireless connection disappears on dektop only. Belkin managing the connection (not Windows). Message is : cannot acquire IP address .What is the best place to start? Have tried disable and enable with no sucess.
View 1 Replies
View Related
Mar 25, 2012
I have a Belkin wireless router attached to my computer. It was set up as an access point, with an IP address of 192.168.0.254. I had some problems with the network today and could not access this unit by typing in the IP in my browser. I feel certain that is the IP address I put in it when setting it up, as I have a record I kept of all the settings. Is there a way to retrieve the IP address to verify that is what it is set to?
View 3 Replies
View Related
Aug 31, 2011
I purchases a Sony Vaio Intel i3 2 weeks ago largely because its a Sony and because of the Wireless Display it offered using Netgear Push2TV 1000.My first day the WiDi worked perfectly but then I got busy installing and updating the computer.And now, two weeks later, when I attempted to connect to P2TV the TV screen just says "Could not obtain network address".I updated the drivers. Nothing changed.Reset the adapter. Nothing changed.Enabled My Wifi/checked for Intel Wireless PAN DSCP server/checked firewall. Nothing happened.I looked up other people having the same issue and there seems to be a lot and they all agree that there is no cure in sight. Apparently, BestBuy even had the balls to tell some of them to restore the computers to its original factory setting to resolve the issue which is pathetic.
[code]...
View 4 Replies
View Related
Apr 9, 2013
Reset to factory defaults. DHCP turned on. Status page shows black for router IP, gateway, and DNS addresses. Powered router+cable modem on/off multiple times already. I also have another wifi router (WRT120N) and it works fine.
Pretty simple connection. Just a ethernet cable between the cable modem and E1200 internet port (Cable modem <---> E1200)
View 2 Replies
View Related
Feb 7, 2011
I have a netgear wireless router, not sure on the model but can find out if required. My xbox360 is hard wired to the router and my Laptop is connected wirelessly to the router using the internal wireless connection on the laptop. The other half has a laptop too, for some reason her will not connect wirelessly, just gets stuck on a constant loop of ''aquiring ip address'' and does not get past this point. Laptop works if hard wired to the router. how do i get ip address to assign.
View 1 Replies
View Related
Sep 5, 2008
I have a linksys system WRT54G at home. I had no problems with the Linksys router until about a month ago when I decided to make it a secure network. I run three computers of the wireless router (1 desktp and 2 laptops) Since making the wireless network secure I can not connect with my business laptop IBM Thinkpad X40, but thother e computers work just fine.
View 8 Replies
View Related
Apr 8, 2012
I just reinstalled Windows XP Home Edition on my laptop. I plugged the laptop to my router via ethernet and did all the necessary updates.The problem is, I cannot connect to the router wirelessly. An IP address cannot be acquired, I think.The ethernet connection is fine, and also other computers can connect wirelessly without an issue. I searched around this site and google, but I can't figure what to do.
View 1 Replies
View Related
Apr 6, 2011
trying to get an IP address from a public wireless network. I am trying to connect to the wireless network here and I get good signal, but it says, that my access has "Limited Connectivity". I then tried to see why my laptop could not access the system and ran "ipconfig/all" in the command prompt. I pasted the results below. I don't know a ton about computers and why my computer will not get a correct IP address (it sends back that the IP address is 169.254.44.160 as opposed to a 10.xxx.xxx.x that the network should be passing out).
Pasted text from ipconfig/all script
Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:Usersxxxxx>ipconfig/all
[code]...
View 3 Replies
View Related
Mar 2, 2011
im purchasing a new laptop i want to be able to use it wireless from the router but also i want it to be wired to the router so do i just need a basic ethernet cable for that?
View 10 Replies
View Related
May 20, 2012
... and made a fundamental mistake of uninstalling adapters hastily without looking into it. Now when I try to re-install the adapters, I'm running into difficulties. Specifically, I don't have the CD-ROM I originally must have used, and the following message is popping up: "Files Needed - The file 'atl02_2k.sys' on Atlansic Fast Ethernet Adapter Installation Disk is needed. Type the path where the file is located and then click OK." Unfortunately, I don't have any idea if there is a path where this is located, so installation cannot complete.
The reason I took this option to begin with was that the wireless connection on my laptop [Asus, Windows XP] was acquiring network address without ever connecting fully to the internet. I had previously tried another of other methods, such as manually entering an IP address, to no avail.
View 7 Replies
View Related
Sep 10, 2011
My problem is my laptop is not connecting to the only network in my home and I can connect to all other wireless networks around.Also there is no problem with the router/modem coz all my room mates can connect and access internet wireless and also through Ethernet.Even I'm able to connect to the home network using Ethernet but not wireless. Strange but true!
[code]...
View 1 Replies
View Related
Aug 13, 2011
connect my partner's laptop to my wireless network?
The router is a Sagem provided by my ISP (Sky). The wireless connection works fine on my MacBook, and various other devices connect no problem with the security key.
However, his laptop (Windows Vista) will not connect wirelessly. After entering the password, it says it can't connect because it 'times out' (we are obviously entering the password immediately with no delay). It connects fine with an ethernet cable. It will also connect to an unsecured wireless network we can pick up.
The security setup is WPA-PSK with TKIP encryption, and we've made sure he is using these settings.
If it might be important, he has just moved here, and previously his laptop was connected to another Sky router with no problems.
View 2 Replies
View Related
Aug 13, 2012
I tried to set up an ad hoc access point on my laptop, but it won't connect to the network I made. I'm using xp sp3.
View 2 Replies
View Related
Feb 25, 2012
My laptop is not connecting to my wifi network, my phone and my other laptop are connected to the same; also if I use a lan cord it is working fine.
View 1 Replies
View Related
Jul 26, 2012
I'm trying to connect my XP laptop to a home wireless network and I keep getting the following error once I enter in the passcode provided by my ISP:The network passcode needs to be 40bits or 104bits depending on your network configuration. This can be entered as 5 or 13 ascii characters or 10 or 26 hexadecimal characters.I have an iphone, 3 ipads, one windows 7 pc and a mac connected to the network with no problems. The password provided by the ISP is 25 characters (letters and numbers). I would hate to have to change the password on all my devices for one Windows XP laptop. I've called Netgear who make the wireless router and they said the only solution was to change the password for all devices.
View 2 Replies
View Related
Mar 11, 2011
I have a wireless network at home but my laptop does not connect to it. The network works as my iPhone connects to it az well as my PS3. The laptop finds the network and has full bars for connectivity but it is only on a local network. I don't have a P.C in the home, the only time I can go online is when the laptop is plugged in. My laptop operates with vista.
View 11 Replies
View Related
Dec 26, 2012
Basically, my laptop won't connect to my wireless network, it just stopped connecting yesterday for no apparent reason, the wifi works with my phones and other laptop but not my laptop. I restarted my router, laptop did a system restore and factory restore but no luck. here are specs from ipcongif
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:Usersdonnie>ipconfig/all
Windows IP Configuration[code].....
View 5 Replies
View Related
