Linksys AE1000 Wireless Adapter - Get Bsod Error 0x0000000D1 In Middle Of Game
Nov 1, 2012
About 10 months ago I got a new computer, with it I got a the Linksys AE1000 wireless adapter. At first all was fine, no blue screens. About a month after I got all my game and such installed (I am a bit of a gamer) I started to get bsod error 0x0000000D1 in the middle of my game. I wasn't sure the cause of the problem, so at first I ignored it. I started to get the same error more and more frequently and the same cause of the problem. I believe that the wireless adapter is the cause of the problem, but alas I can never be sure..
View 14 Replies
ADVERTISEMENT
Oct 27, 2008
Trying to install WMP54G v4.0 on XP SP3. I have tried all three PCI slots. Removing driver RT2500.SYS system will boot. Put it back and BSOD Error:driver_irql_not_less_or_equal
View 8 Replies
View Related
Jul 5, 2012
I got this wireless Linksys ae1000 adapter about 3 weeks ago on amazon and it worked fine for 2 weeks by connecting to the Internet and it had excellent connection then it stopped detecting my network. I tried updating it with the Cd and it said it was up to date. The computer is a Compaq presario and is about 14 years old. I looked in device manager and there were no? s or !s in adapters.
View 7 Replies
View Related
May 22, 2011
I have a Linksys WRT600N wireless router. I just bought a Linksys AE1000 wirless adapter to add wireless capability to my Hewlett Packard PC. I am able to see and connect to my G-Band (2.4) with no problem, but the adapter can't connect to the N-Band. It see's it, but can't connect to it. The signal strength shown is good, but it still can't connect.
View 2 Replies
View Related
Jul 28, 2011
Is there a minimum distance spec for proximity of an AE1000 wireless adapter card to an E4200 wireless router?
View 1 Replies
View Related
Jul 26, 2011
can the linksys ae1000 adapter be use to hook a printer to the network?
View 1 Replies
View Related
Jul 25, 2011
Since recently replacing my home router with a Linksys E2500, I have been getting Blue Screen of Death (BSOD) with my Company's VPN (AT&T). It only happens when I am running wireless with my E2500. If I am hooked up to my E2500 through a ethernet cable it doesn't happen. I have updated the BIOS on my Lenovo Thinkpad T410 and ensured all of my drivers are up to date. I am 99.9% sure the problem is caused by my Linksys E2500 because I have used my laptop on other wireless routes at work and school and never get this problem. I am also ensured that my E2500 has the current firmware installed and upgraded my Company's VPN to the most current level to no avail.
I am getting DRIVER_IRQL_NOT_LESS_OR_EQUAL Blue Screen of Death in agnfilt.sys.
View 9 Replies
View Related
Nov 3, 2012
why it's not included in the setup of the router ? I can only see (GMT+04:00) Armenia and nothing else !!
View 1 Replies
View Related
Sep 24, 2012
I have recently started having a problem with wireless lag. I set up a linksys wrt54gl wireless router and pluged my PC directly into it since it doesnt have a wireless card. Recently my roomate has been complaining that whenever I start a game on steam he gets lag, he is on a wireless macbook. Our internet speed is 10mb/s and im wondering if it is the router.
View 3 Replies
View Related
May 24, 2011
When I get to the screen that asks for the the security password, and after typing in password then at the bottom their is a button for Back and one for Cancel. The button in the middle for Next is not highlited or clickable.
View 2 Replies
View Related
Jan 21, 2011
I'm running Windows 7-64 bit. The AE1000 works great so far, in the one day I've had it, and it appears to start itself and connect when turning the computer on (unlike other people on here that I've seen). BUT, it's all pointless if I can't put my computer into standby. The adapter kicks it right back out as soon as I try to sleep the computer.
I've checked the device settings and "allow the device to wake the computer" is unchecked (in fact, it's grayed out). I rarely turn off the computer; I much prefer to just put it in standby. I don't want to have to unplug the adapter every time I do that.
View 1 Replies
View Related
Jul 30, 2011
We're using our Sprint hot spot and want to make a wireless connection to the TV...can I use the AE1000 for this? If not, what do I need to use?
View 2 Replies
View Related
Nov 2, 2012
I had a hard drive failure recently and replaced my HDD with an identical HDD (WD 500 AAKS) and did a restore from my WD Passport Essential. Everything works as before except I can't install my AE1000 wireless adapter. The OS recognizes the new hardware and I attempt instalation form the setup CD. Istallation goes until it gets to the "Installing" step and then it just stays there forever until it comes back with an error. I am accessing the internet now through a cat 5 ethernet hook-up.
View 2 Replies
View Related
Mar 12, 2012
Bought the AE1000. Hooked it up to my desktop computer (Sony VAIO), and it immediately recognized my wireless network in my house. However, when trying to log on, it asks for the network key, which I correctly enter and it attempts to log on, but fails to connect! I have called Linksys, and they claim it is my ISP's fault. I called Comcast (My ISP) and they claim it is a faulty product.
View 3 Replies
View Related
Feb 22, 2013
With the E4100 I can setup a LAN game of call of duty mw3 and 1 xbox can join the other, pretty simple, Ive always been able to do this with all xbox games that have LAN ability.With the EA6500 I see the game is availible on LAN, but I can never connect to the game, it tries to connect and says cannot connect.Any LAN settings Im missing here, or just another EA6500 bug to add to the list?
View 2 Replies
View Related
Aug 13, 2012
I'm using my AE1000 to connect my computer in my home office to the router downstairs. The problem I'm having is my neighbor's routers show up on my network connections and it ends up slowing down my internet. Is there any way I can keep my adapter from trying to connect to my neighbors?
View 2 Replies
View Related
Jan 28, 2012
I have a Cisco Linksys WRT120N wireless router in one bedroom. On another bedroom which is hardly 15 feet away, I have set up my laptop to connect to it via a Cisco Linksys AE1000 wireless USB adapter. There are two thick walls between one bedroom and another.
Neverthess I find AE1000 dropping connection all the time. There are times I unplug the laptop and take into the same room as my router but it still doesn't connect. The wireless strength constantly varies from Very Good to Excellent but no matter what I try AE1000 never connects to it. If I restart my laptop, sometimes it does connect.
All in all its very frustrating that two Cisco products can't communicate effectively with each other.
P.S: I have both my ASUS tablet and my verizon droid both connecting to the wireless router from the same room as my laptop without any issues.
View 9 Replies
View Related
Jan 29, 2011
Trying to install on Wi 7 32 bit. When starting driver installation I receive an ACCESS DENIED error and the driver does not install.
View 1 Replies
View Related
May 24, 2011
I've been using my AE1000 for about a month now with absolutely no problems. Yesterday it just stopped working, I removed it from the USB port and just about burned my fingers on the metal part that plugs into the USB port. BTW I am on Windows 7 64-bit.
Now it won't work. I've tried reinstalling the driver and the device just blinks in the "Devices and Printers" control panel. I removed it again and it was very hot to the touch after only being in the port for about a minute.
View 1 Replies
View Related
Jul 2, 2011
When I insert the disc for my new AE1000, the setup opens automatically and begins to run. Before even letting me read the software end user license agreement, I get a screen that says the following: "Our Customer Support team can assist.Your Linksys Adapter was not successfully set up."I can not figure out any way to keep this message from showing up.
View 4 Replies
View Related
Feb 11, 2011
I recently purchased two of these units. One used with a quad core AMD rig and another with a single core AMD rig. Both systems are running Windows 7 but the older single core system is having issues. I noticed that I keep hearing the sound of a USB device being disconnected but wasnt sure what it was until I noticed when I try to copy large files over wireless the AE1000 disconnects from my system like I've unplugged it. I've swapped the two units and it didn't solve the problem. My newer quad core doesn't experience the issue at all. I've also tried different USB ports but that doesn't solve the issue either.
View 9 Replies
View Related
Jul 29, 2011
My computer is a desktop in a differet part of the house, away from the main computer. My computer is hooked up with an AE1000 Wireless USB. This USB is wirelessly connected to a Netgear Extender (Repeater) for a better signal strength. This Repeater is wirelessly connected to the router on the other side of the house, plugged into the main computer.
So my problem is, when im working on my computer or gaming on my free time, it randomly disconnects. My signal has a (!) inside of a triangle at the bottom right of my screen. I run the automatic troubleshoot on my Win 7, and it says either "DNS server not responding" or "Your computer is working properly, but some of your devices are not responding". Other times it works just fine and i run troubleshoot alot and it doesnt find a problem. Some days its running at 144 Mbps others 6.5...
I have checked that all of the devices are uptodate. .I've contacted GeekSquad and they said there was no problem. But obviously for them to connect to my computer the wireless has to be working, so they didnt find anything because it worked for the time being.I'm just woundering are there any capability issues with my wireless? Or any other problems im not aware of?
From Cable>Modem>MainComp>Router(Cisco)>NetGear (Repeater)>Cisco AE1000 Wireless USB>My Comp.
View 1 Replies
View Related
Dec 30, 2010
Ive been reading the forums up and down about this device and i notice other threads with users having the "Exact" problem im having. Only problem is im noticing a simaalar theme to ech of those threads. The issue doesnt have a resolution.
With that said i figured i would give this a try regaurdless. The problem i have is very simple.
Windows 7 Yltimate 64 bit.
Motherboard: ASUS M4A785TD-V EVO
Proc: Phenom x6
Ram: 8 Gb
Ive tried all USB ports (2.0) on the computer and they all exibit the same said behavior. This being that when you turn the computer off, restart it, or put it to sleep...the AE1000 will not power on and has to be unseated from the USB port and then reseated before the device is seen by the system and then and only then does it fire up, connect and work perfectly.
The drivers i have used have been the ones off the CD, Then i removed those and downloaded the ones from the website. These drivers have been installed after removing the entry from device manager manually after attempts to use the normal method resulted in the same behavior.
Also i have installed this device on my Dell E6400, Dell D620 Running Windows 7 Ultimate 32 bit and 64 bit and they also exibit the same exact behavoir.
View 9 Replies
View Related
Jan 17, 2012
I am trying to connect a linksys adapter AE 1000 in my XP SP3 but during the CD-instalation appears that error:
AppName: setup.exe
AppVer: 1.1.10049.0
ModName: kernel32.dll
ModVer: 5.1.2600.3541
Offset: 00012a6b
And then a microsoft error windows shut down the installation.
View 2 Replies
View Related
May 24, 2011
I 'm very happy with the AE1000 & got it to work with my A31p by using a USB 2.0 adapter; (it only has USB 1.0) I think the ThinkPad PCMCIA card is faulty because it only works for a brief time & then dies (works fine with current machines)--then I noticed that the newest driver supports USB 1.0 but exactly how is that file implemented? I don't see .exe files, etc, & want to try to use the new driver--I'm using the latest XP--is there a step-by-step tutorial describing how to use the new driver?
View 1 Replies
View Related
May 2, 2010
Does the AE1000 Adapter support Windows Pro 64 bit? If it doesn't, is there any Linksys adapter that does?
View 9 Replies
View Related
Feb 26, 2011
After a lot of googling and scavenging of specifications, I've yet to fully understand what is the difference between the AE1000 and the WUSB600N. I need a good wireless adapter to pair with my E3000, so I'd just like to know what the difference is (if there is one) and which one I should go for.
View 1 Replies
View Related
Apr 27, 2012
Are thay both the same hardware?what's the difference ?
View 1 Replies
View Related
Jul 13, 2011
difference between AE1000 and AE2500. Is this difference only usb base station?
View 4 Replies
View Related
Feb 17, 2013
I've been having a strange intermitent problem with my E1500 wireless router. When we first bought and installed it everything was working well with no known problems. After several months no one using the router was able to access certain websites as well as a game server that we play on. No one had made any changes to the router settings and I assumed at first that it was an ISP problem. After talking with our ISP tech support they finally suggested plugging my PC directly into the modem rather then the router. I did and found that the websites and servers that previously wouldn't connect while using the router were now reachable. Any changes to the router settings since installation.I decided that just in case someone unauthorized had made changes to simply revert the router to factory settings and reinstall the software. After doing this I found that I could again reach the websites and servers that I previously could not. So time went on with no problems until a few months later when the same websites and servers were again unreachable by anyone on our router. I again reset the router to factory settings and changed passwords as a precaution, but this time the websites and servers were unreachable even though I had just reset the router.
View 7 Replies
View Related
Jul 15, 2011
I've been wanting to port forward this game called Minecraft for quite awhile now, but never got around to it, but now that I've wanted to let my friends that can't play with hamachi play with me. I wanted to port forward it so that they go into the game without using hamachi, or any other networking program. I've already tried once and whenever I ran my server, I would say "FAILED TO BIND TO PORT" or just ask me this "Is another running on that port?"
View 9 Replies
View Related
Mar 4, 2011
The product literature for the AE1000 says that you can select which band to use. However there doesn't seem to be an option to do that. I have an E4200 and when I set it up, it assigned my 5GHz and 2.4GHz bands the same SSID. If I configure the AE1000 to connect to that SSID, it seems to connect to the 2.4GHz band. Do I have to change the SSID for 5GHz and initiate a connection to it manually?
View 9 Replies
View Related
Oct 12, 2010
I purchased the AE1000 wireless adapter for use with my Linksys WRT54G router. I first tried to install by loading the CD, which went so far as the "Insert your adapter into a USB port" screen. The Windows "processing" circle spun for about twenty minutes, then I was prompted to "insert the wireless adapter" once more. Rinse, repeat. I absolutely cannot get past this step. I scoured the web for an answer and turned up little. I uninstalled my antivirus and firewall software, made certain that files associated with my prior adapter were removed, tried varying USB ports (all 2.0) on my desktop, and had no success. Today, I exchanged the adapter for a replacement, and I'm encountering all of the same difficulties.
View 6 Replies
View Related
