Linksys Cable / DSL :: Lower Transfer Speeds After Switching To WAG320N?
Jan 30, 2011
I just recently purchased a Linksys WAG320N and replaced a setup with Linksys AM200 modem and a good ole Linksys WRT54GL. Problem is that after the switch i immediately got around 100 KB lower transfer speeds no matter what source i use or kind of transfer i perform. If i earlier got for example 860KB/sec i now only gets 760KB/sec.I´ve set the modem/router up pretty much using the default values, are there any settings i could change to get a more efficient use of my bandwidth? I am using the provided network cable that came with the WAG320N, but i have also tested with other cat 5 cables. The file transfers are taking place using cable attached devices only.
View 9 Replies
ADVERTISEMENT
Dec 30, 2011
I was using Billion ADSL 2+ modem since last 6 years. It was working well but I need Wireless LAN N speed connection and I bought Linksys WAG320N.After configuring the modem my download speed has come doen't to less than 1Mb/s. When I connect to my old Billion I am getting 16Mb/s. [code]
View 2 Replies
View Related
Aug 20, 2011
I recently replaced my old router with wag320n and I'm concerned about the wireless transfer which is really poor. 2,5Mbps is maximum I get which is really disappointing as I share lots of things on my network and could really use some better data transfer. Distance to the router is irrelevant, 5 metres or 0,5 metres - all the same/I tried different frequencies, 20 and 40 mhz bandwidth, no result as well.I know that 150mbps is just theoretical but 20mbps is 13% of the N standard, that's not what I expected from linksys.Firmware version is V1.00.12, all the advanced wireless settings are set to default. I tried different values but they make no difference at all.
View 6 Replies
View Related
Nov 26, 2009
I have the above router, but I have noticed that the USB Transfer speed is very poor. I have a WD External HD plugged into the router and id i transfer filed from my server which is hardwired to the router I only get a transfer speed of about 2.5MB/s.
For a USB device I was kind of thinking I would be getting a minumm of atleast 50-60MB/s.
View 9 Replies
View Related
Dec 11, 2012
My router got turned off for aroud 2 hours, now my speeds have dropped by around 40-50% according to speed test.
View 1 Replies
View Related
Dec 27, 2012
I have a home network running on a Linksys WAG320n and i have attached to it a WD MyBookLive (w Gigabit Ethernet). I am connected on the network via my Dell with a Intel(R) WiFi Link 5300 AGN. I am not able though to connect on N range. I have installed the latest drivers from Intel but nothing changed. When i try to copy a file from my computer to the WD Network drive the transfer rates are very slow. I get Max 2MB/s - 3MB/s while if i connect my computer with a wire the speed goes up by 3-4 times more.
View 5 Replies
View Related
Jan 17, 2011
Very slow transfer speeds problem with this router. When I put the router in the system, my transfer speeds drop from 12 Mbps to 3 Mbps. I've updated the firmware to the latest version but that doesn't work. The most frequent suggestion is to upgrade the firmware which I have already done.
View 5 Replies
View Related
Jan 11, 2012
My E3200 is set up with no encyrption/ security. The 5GHZ band is set to wireless N, channel width is set to Auto (20 or 40) channel is also set to auto. I have my 2 laptops connected on the 5GHZ band and both have excellent connection with 300mbps. I'm transfering some files between the 2 and an only getting 7MB (so ~56mbps). Both laptops are running windows 7 ultimate.
I've tried transfering music, videos, and some ISO's.
View 5 Replies
View Related
Oct 18, 2011
Using 1.0.03.
I am seeing something pretty bizarre: when trying to copy files between two computers (both Windows 7 SP1 64bit), both physically plugged into the back of the E4200, I see extremely slow transfer speeds: 1.0-1.1 MB/sec. Both computers are fast (i7-2600K, both using SSDs) and both have gigabit ports (and the 4200's web UI shows both ports in question as operating in gigabit mode).
This is so slow as to be sort of funny. Each of these computers see speeds well in excess of that when transferring between the computer and outside internet sites...so it's kind of funny that two computers plugged into the same switch in the back of the 4200 see 1 MB/second.
View 6 Replies
View Related
Jul 11, 2011
I'm having very slow file transfer speeds between the 2 computers on my network. One is a gigabit pc wired (cat6) to the e3000. The other is a wireless N laptop. Both computers running Win7. Speeds are like 1.5 - 2 MB/s. when I connect the laptop to the router with a cable (cat6) I get proper high speed. Trying to figure out if it's a problem with the router or windows or what. Speedtest.net says I'm getting 16 MB/s DL wirelessly to my laptop. Shouldn't wireless N be capable of higher speeds than 1.5 MB/s?? Tests are done approx 10 feet from the router.
View 1 Replies
View Related
Jun 4, 2010
some reference material about configuring my WAG320N to use my cable modem via Ethernet port 1. I've seen it mentioned that's its possible, however I've been unable to sort it out myself.
And before you ask, I've brought the DSL router as I'm moving in the next 12 months and my new base will not have access to cable internet and I'll be reverting back to DSL.
View 8 Replies
View Related
Jul 17, 2011
I have a WAG320n and I wish to use it as a modem only so that I can use an Airport Extreme as my wireless router. how to configure the WAG320n so that it can be used in this configuration?
View 1 Replies
View Related
Mar 2, 2011
how to configure or set up VPN on WAG320N?
View 3 Replies
View Related
Aug 27, 2012
I have an intermittent issue with a new WAG320N.Device is new (installed for 1 month now) and is running the latest firmware "out of the box".
Device was confirmed as working (recommended) via the ISP, as it uses a Broadcom chipset, so it works "more reliably" with the ISP's hardware which uses the same chipset.
Setup was painless and the router synced up fine and has been operating for a few weeks. However, twice in the past week the router has become unresponsive to ping over the LAN. Furthermore, the device's lights indicate everything is OK, however I have to reset the router (power cycle) and then it returns to normal.
WIFI is OFF. LAN IP is set manually, DHCP is OFF. The router is plugged into it's own UPS.
View 1 Replies
View Related
Mar 6, 2012
How to configure settings for router E4200I live in Finland and bought new Cisco Linksys WAG320n router modem as I am experienced Cisco user. However after spending several hours and setups on the WAG320n router I cannot get it to connect on the ISP ADSL line.
RFC2684 Bridged
LLC/SNAP
g.dmt or ADSL2+
VPI 0
VCI 100
But once I setup these or acutally any other setting I cannot get the router to connect. With the right settings I can get the DSL PVC status up and connected but the ModemRouter cannot connect and retrieve IP-address from ISP.
View 7 Replies
View Related
Sep 4, 2012
I'm trying to play some online games and my WAG320N does not forward ports, upnp does not function and to top it off DMZ wont even work (not a software firewall issue either). I have the latest firmware (and honestly the stock firmware is terrible).
Am I out of luck or is there something I can do to fix this? I sure as hell will be steering clear of linksys products after this.
View 1 Replies
View Related
May 16, 2010
i need to downgrade my WAG320N and don't find old firmware 1.00.08 AnnexA
View 9 Replies
View Related
Mar 10, 2011
This WAG320N Router can get really slow after a while use which is really frustrating for me since I am a gamer. Power cycling it SOMETIMES does the trick but it will still get slow. It has been slow just now and over here it is midnight so the internet peak should be down and my internet should be faster but its now.
View 2 Replies
View Related
Nov 8, 2012
I have the WAG320N. I know if my router is updated to fix the bug of the WPS?There is an update? Which is the date scheduled for release? The vulnerability of my network has been compromised yesterday because of this bug, so either the update is released soon or I'll have to switch to another product of some companies more serious
View 3 Replies
View Related
Feb 4, 2011
Transferring a file between a wired Win 7 machine and a wireless Snow Leopard mac seems to top out at 32Mbps.I've seen over 60Mbps on this laptop using N networks before, and when I wire the laptop I get a more respectable 240Mbps (presumably maxing out the server's disk I/O rate), so I'd say the issue is the router.
Things I have already tried:updating the firmware to 1.00.125Ghz modeFinding the least crowded 2.4Ghz channelswide channelsSetting network mode to N-onlySetting the transmission rate to 108Mbpschanging the beacon interval to 50, the frag threshold to 2201 and the RTS threshold to 2202
View 2 Replies
View Related
Jul 21, 2011
I have a home network with a media center. I have the hauppauge 1212 HD pvr so that I can record video in HD to my hard drive. I want to stream this content to the differnet PCs on my home network. Every TV in my home I have hooked an HTPC to it. I use them to play dvd's. Stream netflixs etc. My problem is that I am getting a terrible transer rate wirelessly. 600 -750 kbps. (tested by transfering large files from pc to pc) All computers have 300Mbps wireless n cards. all are recieving max signals. There are either 3 or 4 pc's connected at a time depending on whether my laptop is connected or not. Obviously this is way to slow to stream video. Made sure my network name is unique. changed to wireless channel 1 I do think I have WEP 64bit encription could this be an issue?
View 7 Replies
View Related
Jan 26, 2010
I have only purchased this modem a few days ago (upgraded from a working Netgear DGN2000 for Gigabit).... it's solid most the time except for once a day when it needs to be reset.
One morning I accessed a single website, only to find the next wouldn't come up. (approx 7:30am) Lastnight the net was working fine at 11:30pm.... Thismorning I woke up, checked my download manager to find that at 2:30am all queued downloads failed, so the ADSL dropped sometime inbetween then.
The LAN and Wifi still work fine, when I go into the settings and click "reconnect" nothing happens. I need to turn the modem off for a min before it works ok. There is no newer firmware as of yet to try.
View 5 Replies
View Related
Jan 14, 2012
I do not have a "storage" tab in my setup screen. I have Setup, Security, Wireless, etc. According to its manual there must be a Storage tab between security and wireless. Mine doesn't have it. USB drive is connected and I see "mywag320n" on the network but I can't access it because it requires login and password (which I guess I must set up from Storage tab )
View 8 Replies
View Related
Jul 9, 2011
I connected my Western Digital Studio II 2TB external harddrive which is formatted NTFS. I can access the drive and read it. But I can't write it. It says I do not have rights. I tried to get to be the owner of the device but it gave some kind of error.
View 2 Replies
View Related
Feb 24, 2011
my device can connect to the wireless network. When i tried to setup the network again it says that no WLAN network found. I have not change any of the setting in the modem it just can't find any WLAN network. I have tried reseting the modem but still no network found.
View 4 Replies
View Related
May 28, 2012
I need to configure my modem router wag320n let pass the magic packet to turn on my computer from the internet. I've already opened the door 7 to the computer ip but does not work. The bios and the OS are perfectly configured.
View 8 Replies
View Related
Feb 13, 2011
I have recently bought a WAG320N modem Gigabite router to substitute the modem router supplied by the internet service provider (in theory less performant).
Formerly I have a wireless router Zyxel (MOD. P660HW-D1). The main computer is wired (connected trough ethernet), I have also a NAS device (WD mybook world 1TB with Twonky as server) wired and a third wired connection for the above mentioned PLK 300. The PLK 300 (4 Inputs and one output) is used to connect a TV (Sony BRAVIA) a Bluray (SONY) a PS3 (Sony) and a multimedia HD (DVICO). All this was working properly. I have internet access from TV, PS3,... I was able to run videos, photos,... stored in the NAS from TV,....
I decided to change for improving the transfer speed and to allow a better wireless connection (I have initially coverage problems, but because I only use the wireless rarely...).Initially I bought a Linksys E 3000 (I thought it was possible to connect it directly to internet and not trough a modem. I asked to several people and in several shops but no one told me this was not possible). That was my first failure: I would like to suggest the liknsys people to clearly explain this on the product sheet to avoid that not very well informed people like me commit the same error.
Then I chaged the E3000 by the WAG320N. I connect the new modem-router like the former (Zyxel). No room for big errors, just the power, DSL line and ethernet cables. It works for the PC and the NAS but the PLC (PLK300) do not appears to work. Several tries later (including plugin the PLK on the line 1 input of the router it is shown on the network map but do not work. I do not have access to the internet nor to the NAS contents form TV,....
I go back to the former router and everything works again in the simplest way (I have internet access form TV,...) except the Twonky access to the NAS from TV ¿?. I do not know exactly what I have changed,...)
View 1 Replies
View Related
Sep 10, 2010
How do I set the time on my WAG320N manually. I have set the time zone, but the time shown is 04-01-2000 15:33:52, and I can't find anywhere to correct this.
View 8 Replies
View Related
Jul 14, 2010
how to make in WAG320N second PVC for IP TV. It looks like unsupportable feature May be next firmware will include it? Or better to change the device? What Linksys with ADSL are support IP TV?
View 3 Replies
View Related
Feb 6, 2011
I have WAG320N. I attached External HDD to Router's USB.I don't know how to access to HDD and other users also..(not via internet)
View 1 Replies
View Related
Jun 27, 2011
I have set up an access restriction profile by time of day, but it seems that the web sites I list are blocked regardless of the time of day. Does the WAG320N apply the time of day to the blocked URLs or is the time of day only applicable to internet access?
View 1 Replies
View Related
Aug 10, 2012
I have had a wag320n for a while and ever since I bought it, The wireless stops functioning after a day or 2, if I save the settings and then restore the settings (even after it has stopped working) then it works again for a day or to then I have to repeat the process.While it was annoying most of my PC's were wired so it wasn't a major issue but in my new place I am mostly wireless so I am well over it already.
View 2 Replies
View Related
Mar 2, 2011
I want to make use of the SPI Firewall and DoS Protection features of the WAG320N. What are these for? How do you configure them on WAG320N?
View 1 Replies
View Related
