Linksys Wireless Router :: Bridging TP-Link TL-WR841N To E3000?

Mar 28, 2013

The setup:
 
(1) E3000 as root router - IP: 192.168.1.1 - DHCP Server: Enabled - Start IP Add: 192.168.1.100
(2) TL-WR841N as bridge - IP:192.168.1.2 - DHCP Server: Disabled - WDS Enabled
 
The problem:I bridged (2) Wirelessly to (1).when i'm connected to (1) there seem to be no problem at all, the internet is working just fine and i can even ping & connect (2), i guess that means the bridging is working.But when im connected to (2), I get a 'limited connection' & I can't connect the internet. I also can't ping & connect to (2).The IP assigned for the computer that is connected to (2) Wirelessly is not matching the DHCP confg. (169.254.228.216).I have reason to belive that the problem is somehow from a wrong configuration with the LinkSys router but i dont know what it could be. i started from scratch, reseting the two routers over and over again while trying different configurations but with no luck.

View 4 Replies


ADVERTISEMENT

TP-Link 300Mbps Wireless :: WR841N - Unable To Connect To Router

Dec 28, 2012

Region : UnitedKingdom
Model : TL-WR841N
Hardware Version : Not Clear
Firmware Version :
ISP : blueyonder

I am having a problem connecting my router to my cable modem. I keep getting the check network status.

View 1 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR841N - Router Disconnects And Stops Showing?

Dec 9, 2012

Region : UnitedStates
Model : TL-WR841N
Hardware Version : Not Clear
Firmware Version : 3.12.5 Build 100929
ISP :

I have the WR841N v6/v7 Firmware 3.12.5 Build 100929

The router stops showing up after 30 minutes to 1 hour. If I switch it off and on , it starts working normally but again suddenly stops and cannot be detected after 30 mts- 1 hour.

View 6 Replies View Related

Linksys Wireless Router :: E3000 Dish-network Dvr Up Via Wifi Link

Dec 13, 2011

I am trying to connect my DishNetwork DVR up via a wireless link to the E3000.My home network consists of a Linux Server acting as a router/gateway for a DSL link, with several pc's (XP/MAC/Linux) connected on a local 10/100 lan.The existing lan addressing scheme uses static IP's and the DVR requires a DHCP link.I thought the E3000 would solve that issue by using it's DHCP server capability to host the DVR wirelessly and integrate it into the rest of the lan.I set up the DHCP and reserved an IP address, which the DVR pick's up just fine, but  although I can ping the gateway and DVR in both directions, I am unable to access the internet.I've tried to set up a static route, but I think I'm not doing it correctly. [code]

View 9 Replies View Related

TP-Link 300Mbps Wireless :: New Firmware For TL-WR841N(D)

Apr 22, 2013

I am currently running a TL-WR851ND Wifi Router whith the latest build 3.13.27 Build 121101 Rel.38183n() published last November 2012. Now is there any new firmware?

View 1 Replies View Related

TP-Link 300Mbps Wireless :: Corrupted Update To TL-WR841N V7

Oct 31, 2012

Region : Malaysia
Model : TL-WR841N
Hardware Version : V7
Firmware Version : 3.12.7 Build 110726 Rel.37868n
ISP : unifi

as I tweeted here: [URL] The top download from [URL] is corrupt.

Took my ages to find that I need to post in the 300Mbps Wireless Routers forum to get support with the TL-WR841N. All the little subgroups are a little over-engineered to say the least.

I'm keen to improve the performance of this router. It needs rebooting and Apple based clients need to reconnect all the time.

View 1 Replies View Related

TP-Link 300Mbps Wireless :: Firmware Updates For WR841N?

Dec 31, 2012

Region : UnitedStates
Model : TL-WR841N
Hardware Version : V7
Firmware Version : 3.11.7 Build 100531 Rel. 72021n
ISP :

We received new tablet and smart tv but cannot use them due to connection problems. The tv will not connect to the router and the tablet shows strong router strength but will not connect to the internet. I checked for firmware updates and there are 3. Do I simply install the latest firmware or all 3?

View 1 Replies View Related

TP-Link 300Mbps Wireless :: WR841N Connects But Can't Use Internet

Apr 21, 2013

Region : Ireland
Model : TL-WR841N
Hardware Version : V8
Firmware Version :
ISP :

I have a problem with using wi-fi. I am able to connect to the router with my Samsung Galaxy S3, Galaxy S2 or my iPad but when i try to use the internet it doesn't work. I tried resetting but the problem is still there

View 2 Replies View Related

TP-Link 300Mbps Wireless :: TL WR841N How Many Clients It Supports

Oct 29, 2012

Region : UnitedKingdom
Model : TL-WR841N
Hardware Version : V8
Firmware Version :
ISP :

I'm interested in purchasing this router but I need to know how many clients it supports. We currently have a normal adsl wireless router but after about 20 clients it stops accepting anyone new.

View 3 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR841N - Supports How Many Clients?

Jan 29, 2013

Region : UnitedKingdom
Model : TL-WR841N
Hardware Version : V8
Firmware Version :
ISP :

I'm interested in purchasing this router but I need to know how many clients it supports. We currently have a normal adsl wireless router but after about 20 clients it stops accepting anyone new.

View 1 Replies View Related

TP-Link 300Mbps Wireless :: Tl Wr841n The Sign Of Sun Keeps Flashing

Mar 21, 2013

Region : UnitedKingdom
Model : TL-WR841N
Hardware Version : V7
Firmware Version :
ISP : Virgin Media

The sun sign on the modem has been flashing for a couple of days but I am still getting the internet. Is there anyway I can find out why its doing this? I have tried rebooting but still starts to flash.

View 4 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR841N - Automatically Connect To The Internet?

May 13, 2013

Region : India
Model : TL-WR841N
Hardware Version : Not Clear
Firmware Version :
ISP :

i bought the TL-WR841N a week back. the problem is that the internet connection has a web based login( wherin i have to go the "login.hathway.com" and enter a username and password provided by the service provider). i was wondering if there is anything i can do so that the wifi router on its own can log on to my account automatically every time i connect a device to the router. This would save alot of time for me.

View 1 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR841N And Vista Local Only Access?

May 14, 2013

Region : UnitedKingdom
Model : TL-WR841N
Hardware Version : V8
Firmware Version : 3.13.27 Build 121101 Rel.38183n
ISP : Virgin Media

I have recently purchased and installed a TL-WR841N wireless router to replace an older system. After following all of the quick install guide and the like I got it set up and working correctly both wired and wireless. However one laptop in the household, an Acer Aspire 5315 running Windows Vista 32bit, does not connect. Using an ethernet cable works fine but the wireless signal is seen and appears to connect but does not find the internet and states Local Only Access.When connected wirelessly I also cannot ping the device but when connected with a cable I can and get a good return.The firmware is up to date on the router and the latop is full up to date with drivers and windows updates.

View 2 Replies View Related

TP-Link 300Mbps Wireless :: Successfully Tested Different Firmware For TL-WR841N(D)?

May 7, 2013

Region : France
Model : TL-WR841ND
Hardware Version : V8
Firmware Version : 3.13.27 Build 121101 Rel.38183n
ISP : Orange

I am wondering if it is worth switching to OpenWRT firmware for my TL-WR841N V8.0 ..Has anyone successfully switched to OpenWRT Attitude Adjustment Release (12.09) ? If so are you happy with the features and stability provided ? I checked for the Gargoyle firmware, and t seems there are still some issues with TL-WR841N release 8.0 ... Therefore I am not considering this alternative firmware for now.

View 2 Replies View Related

TP-Link 300Mbps Wireless :: WR841N Configuration Page Could Not Be Accessed

Mar 26, 2013

Region : Others
Model : TL-WR841N
Hardware Version : V7.2
Firmware Version : TL-WR841N_v7_120201
ISP :

I recently encountered a problem with my router. It's configuration page is not accessible quickly. When I opened it ( by typing 192.168.1.1 in my browser) it took ages to open and even when it did, the page lacked a lot of features i.e., it did not load properly. Then on a suggestion by a friend, I downloaded the latest correct version (I have an IQ above 60) for my router but the problem persisted. And it is only on my PC. When I access it from some other PC, it opens as it should. My router is only 6 months old.

View 4 Replies View Related

TP-Link 300Mbps Wireless :: WR841N / Losing Connection Randomly

Mar 2, 2013

Region : Latvia
Model : TL-WR841N
Hardware Version : V8
Firmware Version :
ISP : A/S Balticom

recently i bought wireless router TL-WR841N and there hasn't been a day or should i say few hours without restarting/turning on-off.I have cable(no modems,etc)Longest time it has ran without restarting was around 20hours.The problem is it RANDOMLY looses connection like this , but it's not the only problem , mostly when i leave computer and go to sleep or other business i leave router turner ON (no else have access to it and no one touches it), when i come back it just does not connect to internet, it shows that everything is fine , but i have no access to internet.This happens to all connected computers.I have dynamic ip I have russian version of windows xp sp3 , but i think everything is pretty understandable here. connection timed out/request timed out

Code:
Microsoft Windows XP [Версия 5.1.2600]
(С) Корпорация Майкрософт, 1985-2001.
C:Documents and SettingsГеоргий>ping -t [URL]

[code].....

FYI the problem is not in my computers(i tried setting up wireless networks from 2 different pc's) and i'm pretty sure it's not ISP's fault too(everything works fine through cable) , because this never happens with other wireless networks, etc.

View 3 Replies View Related

Linksys Wireless Router :: Bridging Between WAG120N And E1500?

May 12, 2012

I have my internet coming into my WAG120N and going out wirelessly. I want to setup a wireless bridge between this and an E1500, so I can connect my TV to the E1500 (via an ethernet cable) and have it access the internet. Unfortunatly I can run a cable from the WAG120N to where the TV is. So it I can get the E1500 wirelessly bridged to the WAG120N? I have updated the firmware ont he E1500 to get Bridging support, but from what I can tell it only provides bridging via an ethernet cable. Is there away to bridge wirelessly?

View 1 Replies View Related

Linksys Wireless Router :: Bridging From Netcomm To EA6500

Mar 5, 2013

I'm attempting to bridge from a Netcomm router to my EA6500, I can set the Netcomm into bridging mode no problems and as expected the Internet is gone.Next step is to access my EA6500 to configure it to manage Internet access however when I try 192.168.1.1 to get to my EA6500 it takes me to the WEB interface for the Netcomm router as it's default IP is also 192.168.1.1, so I'm stuck.So they have the same default IP address, how do i get to my EA6500 to finish the configuration?

View 4 Replies View Related

Tp-link 300mbps Wireless :: Wr841n Apples Won't Work In 1 Room On Wifi

Feb 11, 2013

-Region : UnitedKingdom
-Model : TL-WR841N
-Hardware Version : V8
-Firmware Version : 3.13.18 Build 120522 Rel.31564n
-ISP : Virgin

I bought a TL-WR841N to use instead of our Virgin Super-hub which dropped the wifi regularly. It took me a while but I stumbled with the set up and got it working.Super-hub (in modem mode) - cable - TL-WR841N - 2 x cables running to 2 switches for (TV, Sky+, WII) and (PC, X-Box). Everything is spot on apart from the other half's Iphone and Ipad. Neither of them can get on the web in the bedroom. Both apples will join the network, but none will be able to get onto the web. The Wifi bars are on display on both products but they just keep spinning and searching to get on the web. I bought a Huawei repeater plug hoping that would work, but it just slows down everything else that can get on the network.Remembering that this happens only in one room, is there something that I can alter that would let these 2 apples access the web besides walking out on the landing every time she needs to update a web page ?

View 5 Replies View Related

TP-Link 300Mbps Wireless :: Connect TL-WR841N To ZTE ZXDSL 831 Adsl Modem?

Apr 27, 2013

Region : India
Model : TL-WR841N
Hardware Version : V8
Firmware Version :
ISP : Reliance

I got a new broad band connection , its with an ADSL modem (ZTE ZXDSL 831). Now i want to plug in my TL-WR841N to use my WiFi and to connect to my second machine!! no matter what setup i try, i'm unable to connect

View 1 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR841N Very Slow Upload Speed Over FTP Or Samba

Dec 3, 2012

Region : Romania
Model : TL-WR841N
Hardware Version : Not Clear
Firmware Version : Latest
ISP :

i just bought this router, all good until i had to upload wireless over ftp or samba. It is version 8.2

Firmware Version:
3.13.27 Build 120802 Rel.51024n
Hardware Version:
WR841N v8 00000000

I bought this router for the advertised 300 mbs, my last 150 router was giving me 6/7 mbs over wireless upload on ftp. Tp link router is giving me 800 k.

Download works on wi fi , i got 9,3 mbs from a 150 N adapter.

I tried all security options , even mac filtering . And i am trying to ftp over network , not the internet.

View 6 Replies View Related

TP-Link 300Mbps Wireless :: WR841N - Timeout Or Delay On Opening Some Websites

Mar 12, 2013

Region : Vietnam
Model : TL-WR841N
Hardware Version : V8
Firmware Version :
ISP : VNPT on Vietnam

I have bought WR841 V8.3. Signal show is good, but i ping to router many timeout or delay when i open some website. Ping only geog when i near router.(some time delay)

View 2 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR841N - Get No Signal / Internet Connection On Computer

May 14, 2013

Region : UnitedStates
Model : TL-WR841N
Hardware Version : V8
ISP : ATT

I get this new router TL-WR841N from amazon.com, I get no signal/internet connection on my computer when I install/connect the router using the installation min CD (same procedure at listed here: url...The DSL connection is good, since I get internet connection when I connect my modem directly (without the router) to my computer. My modem is the old Siemens SpeedStream 4100 with IP Address of 192.168.0.1 from ATT.Is my router deficit ?

View 2 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR841N - Local File Inclusion Vulnerability

Apr 14, 2013

Apparently there is a vulnerability issue which was just discovered with TP-LINK TL-WR841N wireless router running firmware version: 3.13.9 Build 120201 Rel.54965n and below,as described here: [URL] and here: [URL] there latest firmware 3.13.27 Build 121101 Rel.38183n already addressing this issue or is there any other planned correction expected to address this vulnerability issue ?

View 5 Replies View Related

TP-Link 300Mbps Wireless :: WR841N Becomes Inaccessible Via Webpage And Stops Emailing Logs

May 6, 2013

Region : UnitedKingdom
Model : TL-WR841N
Hardware Version : V7
Firmware Version : 3.13.9 Build 120201 Rel.54965n
ISP : Linpop

I have had my WR841N for about a year, supplied to me by my WISP. I like the router in terms of facilities but it seems to have one really annoying problem.

The router becomes inaccessible via the webpage after a random period of several days. I have at times associated the issue with occasional loss of radio broadband service but it is not always so. To try and further localise the problem I set the router up to send emails of the log to me every two hours from 17/04/2013 but today for the second time the emails stopped arriving after the 02:29 message and the router is inaccessible again. The router previously locked up with loss of broadband service on 26/04/2013 sometime after emailing a log at 02:41 on that day but had been running without issue from a cold restart at 12:25 as soon as I noticed loss of service.
Today I have not lost broadband service and so even though I am no longer receiving an emailed log or able to access the router via its webpage I am leaving well alone for the present. Some months ago when I originally noticed the web access issue I downloaded and installed the latest firmware TL-WR841N-v7-120201 and I note that there have been no further firmware releases for the v7 model.

My broadband service is delivered via radio link from a local transmitter mast and is reliable with typical download speed of 20-30Mbps and 30-40Mbps upload, seldom if ever affected by weather so I now feel the problem is inherent in the router rather then being the result of some issue affecting broadband service which has been solid since 26/04/2013

Without the log I have no way of knowing what was happening when the router became inaccessible but I attach the last 24 hours of received log below.

May 5 00:59:42 DHCP NOTICE DHCPC Send REQUEST to server d91650b2 with request ip c3cecc76
May 5 02:29:44 OTHER INFO Mail successfully.

[Code]......

View 2 Replies View Related

Linksys Wireless Router :: Cisco E1200 Wifi Repeating / Bridging

Jun 12, 2012

I just bought the Cisco E1200 about two weeks ago to replace an older Linksys non wireless router. With my old Linksys, I had an Acess Point installed, a trendnet TEW-638APB. Now that I have the new Cisco E1200 which itself is wireless, I'd like to add my TrendNet Access Point to the netowork and extend the wireless range. However the place in the house I want to put it does not have any CAT-5 cable running to it so I'm trying to set up a bridged connection between the two. I'm a bit new to netoworking stuff but I catch on pretty quick. I've been doing research on it all day between the TrendNet AP and the Cisco E1200 but I'm still a little lost. I've got WDS enabled on the TrendNet AP and have the first MAC address set to the Wireless MAC address of the E1200 but I don't get what to make the next three MAC address. Somone told me to make all 3 of them 00:00:00:00:00:00. Is that correct? 

I also have both the E1200 and the TrendNet AP set to the same channel, both are on a 20Mhz channel width, Both have the same SSID though I'm pretty sure that doesn't matter in the long run from what I've read. Also, no incryption on either (no need for it out here).So I guess I'm just wondering how do I use the E1200 as a Wireless Base Station? If that's what it's called? I have upgraded the firmware of the E1200 from 1.0.00 to 1.0.03 but that didn't change anything in regards to seeing an option for a bridging mode or anything. Other than that I'm not sure what else to do.

View 8 Replies View Related

Cisco Wireless :: Bridging AIR-AP1131AG With TP-Link?

Aug 19, 2012

Today I want to build a wireless bridge using AIR-AP1131AG (running WLC) and TP-LINK wireless router. The result is failed. May I know AIR-AP1131AG is support bridging the wireless connection with other vendor's access point or not?
 
In the TP-Link I already match its SSID, Channel and put the mac-address of the AIR-AP1131AG. In the WLC I already see too TP-LINK mac-address is already become a client.

View 6 Replies View Related

TP-Link TL-WR841N Not Working Properly

Jan 29, 2012

I bought a TP-Link TL-WR841N which i have managed to setup up properly, i am able to connect to the wireless and get internet access. However the minute i walk out of the room or a few meters away i am disconnected and i can't re-connect, i get the "windows cannot connect to TP-LINK" message. The signal strength in on excellent and i know it works because when i stand near it, it works perfect.I phoned TP-LINK technical support who were pretty useless and couldn't fix the problem.

View 3 Replies View Related

TP-Link Dual-Band Wireless :: TL-WDR4300 WDS Bridging Not Working

Nov 21, 2012

Region : Argentina
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
Region : Others

I have Enable WDS Bridging and run Survey which detect the other SSID to be joined with the correct MAC address.I had filled the password of my second THOMSON v 585 V7 with the correct Auth Type both routers broadcast on channel 11.But my TP-Link 2543ND cannot made it work.I also disable DHCP and changed my LAN ip to 192.168.1.2 and can access it over my lan.

View 1 Replies View Related

Internet IP Address Cannot Be Configured Using TP-Link TL-WR841N

Dec 15, 2011

I brought this TP-Link wireless router months ago, and I decided to use it this time. Upon connecting the cables, all the lights are OK, however, during the installation, my pc cannot find the router. I read that supposedly the IP addresses of my PC and the router should be the same. But, even if i change the IP address (to 192.168.1.xxx), the computer still can't find it. Pinging it results to a timed-out request.

Windows IP Configuration
Host Name microsof-dhj0uv
Primary DNS Suffix
Node type

[Code].....

View 14 Replies View Related

TP-Link Tl-wr841n Loses Internet Connection?

Jun 29, 2011

I have a fibre optic internet connection, the modem being connected to the TP Link wireless router. The set up works fine most of the time, but at times all the computers connected lose internet connection. The ISP says everything is fine from their end, and locally we are all connected to the wireless router just fine when this happens. I usually just unplug the modem and the wireless router from their power, in order to reset everything, and this seems to solve it.

View 4 Replies View Related

Tp-link Tl-wr841n - Some Laptops Refuse To Work With Wifi

Sep 8, 2012

Before yesterday, there was 5 computers that our family used with access to the internet: one desktop computer with access to the internet via an ethernet cable attached to the wireless router, and 4 laptops- 3 dells, and one mac. All of them worked apsolutely fine.However, yesterday, my father brought in a new dell laptop. Once he connected it to our wireless, the internet on my laptop (a dell) stopped working. His new laptop coudn't get access either. Meanwhile, all the other computers had internet access.

View 5 Replies View Related

Tp-link Wr841n - Can't Get Tablet To Connect To Home Wifi

Dec 3, 2012

I had a TP-Link WR841N router which I replaced with a D-Link DIR-615 today. Before the replacement all my laptops, home desktop and my tablet would connect just fine. After the switch, all machines except the tablet connect to the Internet. My tablet shows that its connected to the router but I cannot access the router admin pages or the Internet. All settings on the DIR-615 are the same as the TP-Link one.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved