Linksys Wireless Router :: E4200 No Write Access To Mijn Muziek Shared Folder
Dec 28, 2011
I have created a share (entire partition) on my external hard drive, which is connected to my E4200 router. The connection to the share is \192.168.1.1ExHDOn the hard drive I've got a folder called "Mijn muziek" (Dutch for My music). So when i go to \192.168.1.1ExHDMijn muziek, the content of the folder is shown. The weird thing is, I can rename the folder, but i cannot add anything to the folder or remove anything from it. I can add files to other folders on the hard driveAnother thing I don't understand is that his folder shows up as "Music" when I create the share.Music is not a folder on the hard drive, but when I go to \192.168.1.1ExHDMusic, i'm in the "Mijn muziek" folder.I have the exact same problems with the folders "Mijn documenten" (shown as Documents) and "Mijn afbeeldingen" (shown as Pictures). Why i don't have write access on the Mijn muziek folder? And how I can manage to get write access on it?
View 4 Replies
ADVERTISEMENT
Jul 17, 2011
Is there any possibility to set linksys E4200 for support anonymous acces to ftp server in read and write mode ?
View 1 Replies
View Related
Nov 2, 2011
Recently installed an E4200 router to an MacPro following the setup as directed by Cisco Connection (connect Ethernet to router and then computer to router.) The wireless and the hard-wire connectivity works fine with accessing the internet. However, we have lost the ability to connect to other computers on our LAN via the Shared folder connection. This is usually accessed via the Sidebar (see image)
However with the E4200 in the mix, all we see is the router per its "given name" (what it was named on installation). I have tried to follow the advice mentioned in other threads, such as "Can't access network shares with E3000" and nothing worked-- and those threads seemed to apply to Windows and PCs anyway.
View 6 Replies
View Related
Jul 9, 2012
I've got a windows server 2003 machine which access internet over a Netgear N150 router also I've got an static IP, now internet is working properly even I can ping my machine from a remote machine.Here starts the real problem, I've shared few folders which I can't access from any remote machine not in my LAN.Although I could access my server through remote desktop and everything else is working fine, I've opened port 445 on router even that didn't worked also Windows firewall is OFF.Now when I try to browse my server through \myserverip it shows me a blank window but when I tried to access it like:
\myserveripsharedfolder it gives me error which reads something like
"File and printer sharing seems online but server is not responding on port 445."
View 10 Replies
View Related
Sep 25, 2012
I have domain controller windows server 2003 and 30 domain members, and everything was working fineYesterday our xp client complain that they cannot access shared folders and files in our domain controller server.After some time i found that i can access the shared folder by name (\nameserver) but i cannot access them by IP (\XX.XX.XX.XX)[CODE]
View 5 Replies
View Related
Apr 5, 2011
Today when I tried to access one network folder, I could not access it. I was getting the message "computer name\folder name is not accessible, you might not have permission to use this network resource".Then I went to the host computer and changed the permission to "everyone" but still I'm getting the same message.
View 1 Replies
View Related
Mar 3, 2011
We have recently ordered a laptop along with a docking station with the intention of connecting it with the desktop PC in the office. We want the documents folders of both computers to be synchronized and to that end we want to share the folders between each computer. However, to do so we will have to connect the laptop to the larger network in our office. Given the sensitive nature of the documents we only want the desktop PC and the laptop to be able to access these files and synchronize them.
Is there anyway in Windows 7 to specify exactly which computers are allowed access to shared folders on a computer? What's the best way to achieve the file synchronization between the two?
View 2 Replies
View Related
Mar 30, 2011
I have shared a folder on my server with sharing & NTFS permissions. I am the administrator and have more than the required permissions.
Yet when i try and access the folder from My Computer, it tells me that it is not accessible and that access is denied.Ive done the same for every other user who should have access, with no problems.
Ive also looked at parent permissions and inheriting and have found no reason for this.
View 6 Replies
View Related
Oct 28, 2011
I have 6 computers here at the office, 5 of which are on XP Pro SP3 and the my main computer running Win 7 Pro SP1. Well 3 of the 5 XP machines can access a shared folder on the 7 machine 1 of the other XP machines can see the 7 computer on the network but can not access the shared folder and the final XP machine can not see the 7 computer at all
View 19 Replies
View Related
Dec 2, 2011
When I'm trying to access a computer within our network, I could not access it and this is the error message "\computer_name is not accessible. You might not have permission to use this network resource.Contact the administrator of this server to find out if you have access permission. There are currently no logon servers available to service the logon request".
View 11 Replies
View Related
Jan 5, 2012
I have a 1TB drive attached to my E4200 that contains several videos sorted in a folder hierarchy, like this (these are just examples):
TV Shows
Supernatural
01. Episode 1.mp4
[Code]....
As you can see, all of my videos are in a carefully constructed heirarchy. This works with my old media server (Rivet for Mac). On the E4200, however, all of these MP4 files are merged together. My Xbox shows folders like "Albums" and "By Date", but these don't really mean anything -- all of my videos are jumbled into these folders and there's no way I can find anything.
Here's how the media server is configured:
If I can't find a solution, than the media server feature of this router is absolutely useless to me.
View 2 Replies
View Related
Mar 27, 2013
My E4200 storage config (portions of it) does not persist through reboot cycles. We often have to reboot the router because we lose wireless conectivity, and each time we reboot, we lose our mapped drives because the router is no longer sharing the folders and permissions I set up. And in the storage settings, my shared folder setup looks like factory default (sharing only root /) after each reboot. Those settings do not persist. I have to restore my router config from a backup after each reboot, which is a real pain. Especially when the kids reboot the router to get their wireless back, but restore is just too complicated for them, and so they call me when they then can not access their network share folders with homework on them.
View 9 Replies
View Related
Oct 18, 2012
I have a computer with some shared files on that I my LAN can access. However this is only on the immediate LAN The computers then all go in to a router which has NAT enabled and connects to the rest of the work network. I have opened up port 135 through 139 both UDP and TCP etc How can I add this folder as a network share on the computers outside of NAT (it even has a web address pointing to it that works for the web file server)
View 3 Replies
View Related
May 7, 2013
I have a EA6500 with a hard drive connected to the USB port. When I try to copy a file to the drive VIA the network folder on my computer it says "Destination Folder Access Denied, You Need Permision To Perform This Action". I used to be able to copy files to the drive so I am sure it is just a setting on the router or something.
View 5 Replies
View Related
Feb 2, 2013
I'm trying map the USB hard drive connected to my EA4500 router as a network drive in Windows 7, and it works perfectly until I enable secure folder access on the router.
After enabling secure folder access, and not changing any other settings on the router I first unmount the drive since it was set up without credentials and doesn't work that way any more. When I try to remap the drive I use the same address, but select "Connect using different credentials" When it prompts me for the log in info I try using the router admin account, but it fails to connect. Windows network diagnostics tells me the device refused the connection. I proceeded to set up an account on the router under the folder access settings with the same username, and password I use on my computer, and tried to connect it without checking "Connect using different credentials" (And typing them in manually if that matters) with the same results.
Even with secure folder access enabled I can still reach the drive just fine by typing "ftp://192.168.1.1/" into file explorer. It prompts me for a username and password, I put in the admin credentials, and I'm in. Even the account I created with the same username/password as my computer works this way.
After disabling secure folder access everything works perfectly fine again... I would MUCH rather do this with it though.
Following these directions: [URL] When clicking the browse button the router shows up when secure folder access is disabled, but does not after it is enabled. I've looked through my windows sharing settings, and haven't noticed anything that should cause problems, pretty much everything is enabled. I've also tried turning off my firewall with no success.
View 7 Replies
View Related
Nov 21, 2011
I have shared folder s on my Win 7 PC.I can access these folders by typing in the username and password on a Mac.I can't access these folders on my Vista PC because there's no prompt to sign in.How do I change the login account on Vista so that it can access my Windows 7 shared folders?
View 2 Replies
View Related
Jul 9, 2012
i want to set a password on my sharing folder and i use windows 7. i shared my folder via network and i use a wireless modem, so i dont want evryone to use my shared folder.
View 1 Replies
View Related
Jun 21, 2012
How comes when i try to open a shared folder on a specific computer it looks like a folder yellow and also it wont allow to open.
View 3 Replies
View Related
Jul 24, 2012
I have got a laptop and Desktop both of them have windows 7 ultimate OS and both of them have Kaspersky Pure V9.1 0.124 ( b ).
At home from the laptop I can access a shared folder on the desktop with no problem
I tried to enable the access to the shared folder over the internet while the laptop away from home, by implementing a VPN. I have successfully managed to configure a VPN IPSec between home router DrayTek 2820Vn that acting as VPN server, and the laptop that has TheGreenBow VPN client.
Through VPN tunnel laptop can ping the ip address for the router and the ip address for home printer and the ip address for home desktop , all of those are located at the other end of the VPN tunnel.
And I can access the web interface for the router as well by typing its private ip address. On the laptop and through the VPN tunnel I tried to map the shard folder on the desktop (\desktopipaddressSharedFolderName) , but it didn't work!!!.
when I existed Kaspersky on the desktop , I was able ping the desktop and to map the shared folder which is hosted on the desktop
How can I configure Kaspersky to let the the shared folder to be mapped via VPN ?
View 3 Replies
View Related
Dec 9, 2012
I purchased the EA6500 a few days ago, and when I'm connected to Cisco Connect Cloud I am unable to select Folder Access / FTP Server / Media Server. I click them and nothing happens.Also, the Cisco light on the router keeps blinking.
View 5 Replies
View Related
May 5, 2012
How to get rid of Username Password prompt for VPN user connecting to computer with guest access on shared folders?If a VPN user types any word in the user name and hits enter without password, it gets in and sees shared folders, but I want this prompt to be disabled.
View 1 Replies
View Related
Dec 13, 2011
Have just had a stab at using my Netgear DGND3700's USB drive sharing - I had a spare external HDD + I want to be able to access files on it both over the 'net and from local network. Both work fine, very easy to set up, however I am unable to edit settings for the shared folder, which means I am unable to password protect it.
I don't need a password for local sharing but obviously it isn't ideal to have files freely available on the Internet, have looked into troubleshooting but can't find any similar stories with Netgears.I click "edit" or "create network folder" and it loads for a second or two but just stays on the same page. There is only one option to select but I have tried clicking the radio button first anyway, then clicking edit, same result.
View 1 Replies
View Related
Apr 20, 2011
How to place security + a password on a folder that is shared on a local area network. i don't want other users to access the contents in the folder since we are all on the same local network.
View 4 Replies
View Related
Mar 11, 2013
I have a user that is trying to save an excel speadsheet that is located in a shared folder on a server, the user can open the file and edit ok but when they try to save the file the progress bar pops up but just hangs then a message pops up to saying "file not saved". They are using Windows 7.The user is new and I have just set up their account so thought it might be permission issues but I have logged the user in on two other different machines (1 win7 and 1 WinXP) and they have no problem at all.
View 7 Replies
View Related
Sep 21, 2011
Did not write down the KEY for my wireless router...a CISCO/LINKSYS E1200. My old router had an HTTP address I could type in and access the router and read the security setings.....what http do I type in to read key on this wireless router?
View 11 Replies
View Related
Sep 28, 2011
I am trying to FTP a 25MB file to a client using FileZilla and my wired WRT310N router. In the past I have never had a problem but now I am getting the following error: Could not write to transfer socket: EPIPE - Local endpoint has been closed.I changed the MTU to manual - 1500 on the router.I am using an almost brand new iMacThe iMac firewall is OFFTimeout in Filezilla is set to 0.The transfer stops at about 12MB everytime I try; which is ~ 35 seconds.
View 6 Replies
View Related
Nov 15, 2012
I've been trying to get FTP Running up on my router for some time now.
I know my current WAN address and have setup a specified folder on my E4200 for the FTP partition. A username for myself has been created with login info and I have forwarded the port I have specified on my router's FTP configuration page.
I try to log into the server, but whenever I try to log into it, I keep getting a "incorrect login information" message back at me.
If I cancel out of that then I get an error message saying it can't find the specified folder and to check the address of the server.
I know the login information information is correct and I've tried changing the password to others of varying lengths.
I've also tried changing the port I'm running the FTP off of incase my ISP has blocked that port, nothing works.
View 9 Replies
View Related
Nov 10, 2012
i have installed lutron lighting in my home and need to configure e4200 so i can access it from outside home with iphone application. Lutron manual says to go to VPN iphone setting and add PPTP connection, server, account and password. I need to do same on e4200 but not sure where to go create pptp connection, accounts and passwords?
View 4 Replies
View Related
Jul 22, 2012
I bought a seagate USB hard drive today from Target. Its a 2TB and I was going to use it via USB attached to my router. I connected it and the Linksys firmware detected it and I was able to create the appropriate folders on the drive for storage through the linksys GUI.My issue is that I am now trying to move my movies and tv shows over to the drive and it isn't allowing me to do that.
I get an error message that says "You don't have access to //myshare. contact your administrator".
I'm not sure why I was able to create folders on this drive but am unable to move files to it. Makes no sense to me. Write permission is write permission no?My machine which currently stores the media files is windows7 utimate. The router is E3000 using up to date stock firmware.
View 1 Replies
View Related
Jan 7, 2011
If I try to set a torrent download to write directly to the USB drive on my E3000, it only works for a few minutes (at low speeds) and then I lose access to the drive and the torrent stops. I can access the drive again less than a minute afterwards.
It'd be handy to be able to write torrents straight to the USB drive instead of having to move the completed files to it after the torrent is finished.
View 5 Replies
View Related
Jun 18, 2012
I have my main router, a E4200v2 which I use as a router and it provides wireless signal throughout my house, however reception is not as strong on the upper floor and there is a slight dead spot, so I purchased an E4200 for the uppermost floor.I set the E4200 to bridge mode so it will act solely as an AP.However connecting the two routers LAN to LAN and the AP does not access the internet.Setting a static IP for the router, instead of acquiring one via DHCP causes me to not be able to access the admin page on the AP.
Connecting WAN on the E4200 to the LAN on the v2 does not work either.My goal here is to have my main router on 192.168.1.1 and the AP on 192.168.1.2 where I can access the admin settings for both routers in case I need to make changes.
View 9 Replies
View Related
Jun 15, 2012
Just got a new hard drive installed on my laptop, and now for some reason I can not access my router. I am connected to the internet, and everything is fine there, but when I type the 192.168.1.1 and enter admin as the password, it shows that I am unauthorized.
I have a Linksys E4200 router
View 2 Replies
View Related
Jan 31, 2012
I posted before about my problem in forwarding certain ports in a LAN-to-WAN cascaded router setup, and I finally gave up looking for a solution, and went for a LAN-to-LAN. On the internet there is many articles to be found on how to accomplish the setup, but none of them is complete, and as such, I think I really screwed up someplace. My setup: ISP modem/router (192.168.1.1 / 255.255.255.0) DHCP enabled, and DHCP address range 3-100 NAT configured Static IP address for a Synology NAS connected to the E4200 SSID id_1
Then the E4200 Internet connection type: I set to Static IP IP 192.168.1.2 Subnet mask 255.255.255.0 Default gateway: 0.0.0.0 (to disable the WAN)
Then, the network setup: Router IP: 192.168.1.2 gave me the error that WAN and LAN IPs were identical. I played around quite some time but always got an “illegal value” error. Then finally I put the IP to 192.168.0.1 (IP I had in LAN-to-WAN) and this was accepted. And subnet mask: 255.255.255.0 The SSID I left unchanged from what it was, id_2 (also gives me the advantage that I know to which router I am connected)
I rebooted the E4200, and I was connected. But … I am unable to connect to the E4200 configuration page, and even Cisco Connect cannot establish the connection.
View 9 Replies
View Related
