Linksys Wireless Router :: Cisco WRT110 Won't Work - Showing Full Signal
Jul 13, 2011
my router has all the lights on that it's always had. I use the wi fi for my iPhone,iPod, and laptop. On all of then I'm able to to search and find my connection and connect to it , but it's shows I'm connected with full signal but my internt just worn work . I can't connect to the internt on none of the devices, also if I connect the ethernet from my modem to my router then my routers ethernet to my pc my pc's internt won't work.
View 2 Replies
ADVERTISEMENT
Feb 11, 2011
I'm standing beside my wireless access point with my laptop. It shows full signal in my laptop but I cannot connect to internet. I clicked on the view available networks and then the SSID names, typed my network key, and clicked "connect". It keeps on connecting, connecting and finally disappears and WAN connection remains with crossed mark. But it shows full signal in laptop and I'm standing beside the WAP.
View 4 Replies
View Related
Jul 22, 2011
Was online the other night when my network suddenly dropped out on me. I assumed it was the router, not my computer, so I restarted it and got nothing. Same with my modem. Then I completely reset the router and, obviously, lost the network I had set up. Didn't realize until today, when I downloaded the setup instructions and reinstalled the router with a new network that the problem might actually be with my computer. I can use the ethernet port to access the web both with the direct line from the modem and when using a line through my router, I just can't get my computer to work on the network I set up. I know the network is valid because it works with my smart phone and a couple of other devices. On my Mac, it shows up in the list of available networks and has full signal strength. Diagnostics in network preferences gives me the following message: "AirPort has a self-assigned IP address and may not be able to connect to the Internet."
View 2 Replies
View Related
Dec 19, 2012
I am facing a kind of weird problem!! My Sony Vaio was getting connected to my Home wifi network and I could access Internet without any problem. Its been few days now that I can't access Internet though it shows connected. It does connect with the Wifi without any issue and even show the full signal like before, but actually there's no internet access. No browsers (IE,Chrome,FF) load any webpage, no messengers work.
View 1 Replies
View Related
Oct 26, 2011
I recently bought an AE1000 wireless adaptor, but I have run into a problem.The range on the device is very low, as the only way to get full signal is when the router and device are right next to each other.I have read that this could be due to the device operating on 5.0Ghz frequency, and that this setting is changed through the Cisco Connect software. This software was not in the Setup CD, and the online installer did not install the software either.
View 4 Replies
View Related
Jan 27, 2012
Just got an E2500 and installed it with no problems and it was working correctly for 1-2 days. This evening the signal strength of my SSID dropped to LOW and a new SSID now shows up with full signal strength. It s not an SSID from any of my neighbors and from checking several forums it appears this is known problem.
View 2 Replies
View Related
Dec 25, 2012
I have a Sony Vaio SVE1512B1EW and have connected it to my wireless. Works absolutely fine. However recently whenever I turn on my laptop the Internet will work for 2 minutes and then not work, even though it says its connected at full bar signal. When this happened again I tried the Internet on a different laptop and found that it is not the wireless! What will I do? It's telling me there's a connection but not working?
View 3 Replies
View Related
Apr 26, 2012
Any diagram showing the antenna position or signal pattern from the EA2700? I know that Cisco recommends that the unit be placed "near the ceiling" but I'm looking for more specific information. Should the unit be mounted vertically or horizontally.
View 1 Replies
View Related
Apr 13, 2011
I have Asus EEPC Seashell/ 1015PEM netbook. The wi-fi connects only near/ so close to the wireless router with full signal. Just next room, blocked by a wall it disconnects, but full signal still exists. Is it anything to do with driver or hardware incompatibility- netbook has 802.11n adapter. Wireless router/DI624+ is 802.11g.
View 8 Replies
View Related
Aug 5, 2011
I have full wireless signal but I cannot pull up any webpages...it says cannot find server
View 1 Replies
View Related
Jun 17, 2011
i have installed a belkin d wireless card on to a P.C it shows full single and picks up other networks in area but it will not let me connect i have 2 wired P.C's running and a wireless laptop all running fine.i have reset router with no luck uninstalled card and reinstalled used software that came with card and downloaded most recent driver's alos i have installed software that came from ISP(SKY). P.C is running XP ant ideas what i can try next. i have lso installed card on to another P.C and it worked OK
View 2 Replies
View Related
Nov 8, 2012
I had a small issue wherein my pc would lose ALL network connection to my pc, but the network icon showed that i had full signal, no issues. as long as i sign in on skype before the internet drops, it will stay on after it drops and i can still chat and everything, and to fix, i had to restart my pc. well, it had gotten better.And now its back, and WAY worse then before. skype doesnt have time to sign in upon bootup, and wont connect. steam wont connect, NOTHING will conect, but i still show full signal and no yellow mark or anything! I have done the following:
reboot(derp)
reinstall drivers
move wifi adapter
disable IPv6
[code]....
and no, i am not able to reinstall windows. I am going to try (soon, i am not able to just yet) direct ethernet to my router. all other PCs in the house are working perfectly, even this one that is slow as crap because it has windows 7 and is designed for windows XP.
View 11 Replies
View Related
Mar 15, 2013
I have already seen many threads with the same problem but none of the solutions worked for me.I am unable to connect to my router (Beetel 450TC1) via wireless network. Even if I enter an incorrect security key, no authentication error is displayed. The wired connection works flawlessly and I can access router admin panel through wired connection. Things I have tried:
1) Called up the ISP customer care.They upgraded the router firmware, did a hard reset and did all settings remotely. This did not fix the problem and the executive reported that I have a faulty hardware. I think my hardware is fine because the same problem exists with other smartphone devices and I can connect to college WiFi easily.
2) Changed wireless security authentication and SSID.
3) Tried a manual hard reset and firmware downgrade (same problem persists with downgraded firmware) and again upgrade.
4) Tried different operating systems (Windows 8, Windows 7, Ubuntu 12.04). Same problem exists with each of them.
[code]....
View 8 Replies
View Related
Apr 1, 2012
The unit seems to be Ok, but it's not. Power light is solid blue, Internet light is flashing blue when connected to cable modem, when wireless is on wireless light flashes blue, when ethernet cable is connected the correct 1-4 blue light flashes.The unit issues IP addresses wirelessly with or without security, and on ethernet, but with no Internet access.I can log on to the router and have upgraded firmware to 1.0.07. Tried reset button a number of times, makes no difference.When logged in to the router and looking at the Status screen, it shows no IP address, no Subnet Mask, no Default Gateway, no DNS, thus I can't get on the Internet. Connection type is Auto Config - DCHP. It does show the correct domain name as other wireless routers show.
View 3 Replies
View Related
Jun 21, 2012
Tried everything I could find on the boards (hard reset for 30 seconds, cycling power). The power light's the only one that's coming on and I can't tell if it's on continuously or just blinking really fast.
No problem with direct connection to the modem via ethernet, but I can't see the WRT110 via ethernet or wireless. It just suddenly stopped working yesterday.
View 3 Replies
View Related
Mar 17, 2009
I am trying to update my WRT110 which has 1.0.04 firmware on it right now but when i try to update it toVer.1.0.05 all i get is this message.... i dont know what to do i never had a problem updating my older router's befor i had this one this is the first time im updating this one i tryed updating it on IE 8 RC1 & also Safari 4 but i get the same message . I've also tryed saving the firmware file in it's own folder still no luck try updating on my xp desktop & my laptop with vista with same message? is it a problem with linksys with the file on there website maybe?
View 9 Replies
View Related
Jul 2, 2011
The WRT110 is hooked up to Cable through Comcast and works fine with LAN connections. The problem comes in with more than one wireless laptop tries to connect. First, it was loaded with 1.0.4 firmware and my girlfriend's XP laptop would connect but drop the connection a lot. My Windows 7 laptop wouldn't connect at all. After trying everything someone recommended upgrading the firmware to 1.0.7. Well, now my Windows 7 laptop connects but the XP laptop will not. The DHCP won't assign it an IP, although it says it's connected.
View 2 Replies
View Related
Jul 28, 2011
I see that many people have the same problem, random disconnects. I am a long term sufferer from this. I have called support before they can't fix it. and being knowledgeable with routers has not worked at all. I turned off every wireless device in the house, even the microwave it still happens. I change the channel countless times it still happens.
View 3 Replies
View Related
Jul 27, 2008
I have a WRT110 wireless router which disconnects suddenly and continuously. In addition, its performance is really poor. The current firmware installed is 1.0.03. I found a new firmware for this model (1.0.04.10) but when I try to install it, I choose the .bin file downloaded from Linksys TechSupp website, click on the "Start Upgrade" button, but I always get the following message "Please designate the path to the firmware".
View 9 Replies
View Related
Feb 1, 2011
I have a WRT110 wireless router. My problem is that my laptop has issues connecting to my router. It sees it and shows that there is a strong signal but sometime it will connect other times not. My laptop has no problem connecting to other wirelss routers. And my other devices have no problem connecting to our router. I've reset the router several times and changed the router to no password or security of any sorts. How can I get my Laptop to connect to my router?? I feel like it is a setting issue between the Router and the laptop. Is there a way I can erase the history of the router from the laptop and start fresh?? Like I've said I have reset the router several times. Does it have to do with my firewall?? It's just frustrating that my laptop can connect to anything but this Router. And my other devices like our blue-ray and Wii can connect to the router without problems so why can't my laptop and router connect to each other?
View 7 Replies
View Related
Sep 23, 2011
I have a WRT110 router connected to my desktop computer. The router works great for the desktop and one laptop, but if I try to connect a second laptop it disconnects the first one.
View 2 Replies
View Related
Feb 1, 2012
When I type the routers IP address in teh browser window, nothing happens so I cannot access the router setup. I have a WRT110. What am I missing. I was able to do that when I first setup the router.
View 1 Replies
View Related
Jun 13, 2008
I have a WRT110 router (firmware v. 1.0.04) and a PC and an XBox 360 connected to it (both via cable). Every 15-20 minutes the connection is dropped for appr. 1-2 minutes. I tried modifying several router settings, but the connections are still being dropped
View 9 Replies
View Related
Jul 2, 2011
I have a WRT110 that let's a wired connection through to the internet but none of the wireless connections. I'm connect to a new Motorola DSL modem provided by AT&T. (Lightening killed the last one) My wireless stuff can talk to each other but can't access the internet.
View 2 Replies
View Related
Mar 17, 2012
I'm trying to upload some images for my job but everytime I hit the up load link to get the image loader I get a redirect to [URL]
What does this mean? I know its a router thing because I tried getting the image loader by using the computer directly from the modem and I didn't run into the issue. Do I have to open a port or something cause all I know is the router is on security lock down.
View 4 Replies
View Related
Dec 9, 2011
i have problem with wi-fi network and WRT 110. Seems to me that router only accepts 1 device. I used to have only 1 device (laptop) using wi-fi and desktop connected with ethernet as a second device. It worked just fine. Recently I added 2 wireless devices : apple tv and ipad 2. I can access wireless network only with one of them being “on” at the time (e.g. apple tv works when ipad and laptop don't use wi-fi. As soon as I connect another device router stops working (i'm loosing connection for wi-fi and ethernet) and I don't have internet access until I reboot router. (it happened only once for short period of time – about 40 min.- that I was able to connect to wi-fi with 2 devices. After that it never happened again). I'm not sure if I need newer router or I can still make it work with wrt 110.
View 4 Replies
View Related
Dec 30, 2012
Mac airport shows full bars in network connnection and green connected dot, but no access to internet. Ethernet connection works fine. I also couldnt connect with my Iphone.
I have Charter cable with Motorolla SB6121 modem. I've reset the modem, rebooted everything, cloned my ip address, all several times .......but still no go.
Linksys says they don't support this router anymore accept for a pay for support service, which I would like to avoid.
View 5 Replies
View Related
Jan 23, 2013
I have a Linksys wrt110, and we didnt have a password on it for a while, i went and changed it so we had a password,now i have put a password on it, and now it wont let me connect any device to the internet, checked iphone and mac, nothing will work.
View 2 Replies
View Related
May 18, 2011
I am having trouble viewing all the Administration logs in ACS View. I have my Local Log Target set to a Maximum log retention period of 90 days. In ACS View I can display authentications that go back 90 days + However when I try and display the "ACS_Configuration_Audit" in View and perform a Custom query that goes back 90 days it will only display about 35 days of Admin logs.I know the logs are there because when I go into CLI and do a search like "show logging | i "ObjectType=Administrator Account" the Administration logs go back over a year.why ACS View cannot display all the Admin logs?The ACS is running v5.1.0.44 Patch 6 (Also experiencing this in a v5.2 ACS as well)
View 2 Replies
View Related
Jun 6, 2012
My brother has an HP G60 from 2009 with windows 7 home premium and 64 bit operating system. Whenever he turns it on and connects it to the internet, the whole network crashes. My xbox, ipod, laptop, and the main desktop (Which we also just changed to a Dell one.)downstairs all cannot connect to the internet. This lasts from anywhere between 2 and 15 minutes and it continues to crash the internet in about 15 minute intervals as long as his computer is connected to the internet. No other devices in the house cause this as I can have all of my stuff connected and nothing happens. We have a Linksys WRT110 router but I don't think that or the modem is the problem as we have changed both multiple times. This has been happening for about a year ever since my oldest brother gave my brother the laptop.
View 10 Replies
View Related
Oct 22, 2011
I have a hardwired HP computer with no problem connecting. The remainder of my wireless devices will not access internet. No problem until about 3 weeks ago then all of a sudden it stopped. All wireless devices detect the router/network, but will not allow access to the internet.
View 1 Replies
View Related
Feb 4, 2012
Set up: Router: WRT110 1 computer connected via ethernet cable 1 computer using a wireless nic card from cisco
The problem is thus: if the first computer is actively using the internet (even activities as mundane as browsing one's email) the computer connected wirelessly will lose its connection to the internet yet maintain its connection to the router. Both can be actively using the internet, but the wireless will seemingly at random drop internet access (usually in 30-120 minute intervals).
The computer connected via the ethernet cable was unplugged for a week and during that time the wirelessly connected computer was used extensively and did not lose connection once.
I don't understand how to even frame this problem in a concise manner, much less seek information as to how to resolve it. It's seemingly giving all priority to the computer connected via ethernet but I that's just intution speaking.
View 4 Replies
View Related
Aug 28, 2008
Setting date and time on WRT110
View 9 Replies
View Related
