I have Asus EEPC Seashell/ 1015PEM netbook. The wi-fi connects only near/ so close to the wireless router with full signal. Just next room, blocked by a wall it disconnects, but full signal still exists. Is it anything to do with driver or hardware incompatibility- netbook has 802.11n adapter. Wireless router/DI624+ is 802.11g.
View 8 RepliesNew wireless router was installed yesterday. I switched from Linksys WRT54G v. 5.0 to Medialink N. I hardwired to desk top first. Then I turned on my laptop and connected to the internet without problems. Next device = Acer Aspire netbook. The netbook receives a strong signal from the router but cannot connect to the internet.
View 1 Replies View RelatedI have Virgin Media XXL broadband in the UK. I have Avast antivirus. Windows firewall is enabled and all security updates are up to date. I have a 50mbit virgin fiber optic broadband which is working fine on my flatmate's pc's. While making sure the internet wasn't being used my speedtest still returned around 1mbit with full signal strength. I have run speedtest on 3 pc's at the same time and 2 of them were over 30mbit while mine was still barely 1mbit. I am using an Edimax EW-7811Un nano usb adapter. From reviews I read that it should work great with Virgin. But for some reason it doesn't work well despite the full signal strength.
View 7 Replies View RelatedI am facing a kind of weird problem!! My Sony Vaio was getting connected to my Home wifi network and I could access Internet without any problem. Its been few days now that I can't access Internet though it shows connected. It does connect with the Wifi without any issue and even show the full signal like before, but actually there's no internet access. No browsers (IE,Chrome,FF) load any webpage, no messengers work.
View 1 Replies View RelatedI have a WRT54G working throughout our home. It has 4 hardwired ethernet connections, and several wireless connections working without any issues. Currently my Droid phone, iPad tablet and 2 laptops connect and get through to the internet via wireless connection.
Today I purchased a new TF700T Asus Infinity Tablet. I'm able to get it to connect to the router, see the network, and the router can see the Infinity Tablet (assigns an IP address), but no internet access.
what tools I can use to see where the traffic from the tablet is being blocked. The log on the router doesn't show me anything. I'm assuming there's a port or ports being blocked by the router, but no idea which ones.
Already tried hard resets and a firmware upgrade to no avail. In fact the latest firmware upgrade (4.21.5) hosed the entire network so I reverted back to 4.21.1
I recently bought an AE1000 wireless adaptor, but I have run into a problem.The range on the device is very low, as the only way to get full signal is when the router and device are right next to each other.I have read that this could be due to the device operating on 5.0Ghz frequency, and that this setting is changed through the Cisco Connect software. This software was not in the Setup CD, and the online installer did not install the software either.
View 4 Replies View Relatedmy router has all the lights on that it's always had. I use the wi fi for my iPhone,iPod, and laptop. On all of then I'm able to to search and find my connection and connect to it , but it's shows I'm connected with full signal but my internt just worn work . I can't connect to the internt on none of the devices, also if I connect the ethernet from my modem to my router then my routers ethernet to my pc my pc's internt won't work.
View 2 Replies View RelatedI have: ASUS Netbook with Windows 7 Starter.
As of last night, I cannot connect to any of the wireless networks I use every day (my personal home network or my school's WPA2).
The signal strength is very good, but it says "Limited Access" next to the network name. Apparently "Limited" means "No" because I am not connected. Here's what happened:Lavasoft Ad-Aware was blocking a site that I needed to access. I haven't used Ad-Aware in months, and it did not even appear to be running. So uninstalled it with Add/Remove programs in the control panel. BUT, mid-way through the uninstallation, I got a blue screen and my computer restarted. When my computer booted back up, I could no longer connect to my home's wireless. I'm at school now and I cannot connect here either. Ad-aware is gone from the add/remove programs list, but there is still an Ad-Aware folder in Program Files. The folder still has a bunch of stuff in it, including adaware.exe. I dont see an uninstaller (but i havent really investigated that yet). so now i can't connect to any network. Here's What I've TriedRan troubleshooter. Useless. Turned off my netbook's wireless. turned it back on. Device manager says my Network Adapters are working fine. No yellow or red icons next to them. also tried resetting stuff with the command prompt. something about winsock and netsh. I don't know what I was doing though. just following instructions from other people on yahoo answers when i googled the problem.
I disabled the Bluetooth in my lap but the lights is on why? My laptops is Asus netbook 1015?
View 4 Replies View RelatedJust got an E2500 and installed it with no problems and it was working correctly for 1-2 days. This evening the signal strength of my SSID dropped to LOW and a new SSID now shows up with full signal strength. It s not an SSID from any of my neighbors and from checking several forums it appears this is known problem.
View 2 Replies View RelatedI recently moved into a larger 2 story house, and for the first few months I was using a Linksys E1000 I've had for about 2 years now. It's a fine single band router, but the people upstairs and the xbox/PS3 in the living room didnt have the strongest connection.
I shopped around and finally got a ASUS RT-N66U for a really good, strong dual band router that would supposedly give better range and performance than my old E1000.
Unfortunately, since I got it everyone is having issues they never had before, namely:Signal dropping all around the house and having to search for the network much slower performance than before the xbox/PS3 cant hold a stable connection even for a few minutes now, when before you could watch Netflix HD programs easily
I've upgraded the Firmware to 3.0.0.3.178 since I heard earlier firmwares had issues, but other than that and opening my ports for qTorrent it is relatively stock settings.
I have full wireless signal but I cannot pull up any webpages...it says cannot find server
View 1 Replies View Relatedi have installed a belkin d wireless card on to a P.C it shows full single and picks up other networks in area but it will not let me connect i have 2 wired P.C's running and a wireless laptop all running fine.i have reset router with no luck uninstalled card and reinstalled used software that came with card and downloaded most recent driver's alos i have installed software that came from ISP(SKY). P.C is running XP ant ideas what i can try next. i have lso installed card on to another P.C and it worked OK
View 2 Replies View RelatedI just bought a E1200 routerand using automatic setup by using CISCO connectafter that, I only got a CONNECT SPEED with about 10Mbps in my android smart phone,I would like to know how can I increase the WIFI strength WITHIN THE WIFI SETTING, I chose MIXED mode rather than specific in b/g/n mode.
View 4 Replies View RelatedI had a small issue wherein my pc would lose ALL network connection to my pc, but the network icon showed that i had full signal, no issues. as long as i sign in on skype before the internet drops, it will stay on after it drops and i can still chat and everything, and to fix, i had to restart my pc. well, it had gotten better.And now its back, and WAY worse then before. skype doesnt have time to sign in upon bootup, and wont connect. steam wont connect, NOTHING will conect, but i still show full signal and no yellow mark or anything! I have done the following:
reboot(derp)
reinstall drivers
move wifi adapter
disable IPv6
[code]....
and no, i am not able to reinstall windows. I am going to try (soon, i am not able to just yet) direct ethernet to my router. all other PCs in the house are working perfectly, even this one that is slow as crap because it has windows 7 and is designed for windows XP.
after installing Windows 7 Professional on my netbook, there has been a problem. I think it may be a problem with the wireless card or something..?
But anyway, before I had Professional, I had Starter, and that worked perfectly with the wireless internet. Now, however, I can only connect through ethernet. I know it is definitely a problem with my netbook, as before, the netbook could recognize all the routers, etc., on the street, and now it can't even recognize the router right next to me. Also, my phone is able to connect to my router perfectly fine...
I am running a Samsung N130 Netbook with Windows 7 Professional (x86), I bought the netbook at around November 2010 .
I have already seen many threads with the same problem but none of the solutions worked for me.I am unable to connect to my router (Beetel 450TC1) via wireless network. Even if I enter an incorrect security key, no authentication error is displayed. The wired connection works flawlessly and I can access router admin panel through wired connection. Things I have tried:
1) Called up the ISP customer care.They upgraded the router firmware, did a hard reset and did all settings remotely. This did not fix the problem and the executive reported that I have a faulty hardware. I think my hardware is fine because the same problem exists with other smartphone devices and I can connect to college WiFi easily.
2) Changed wireless security authentication and SSID.
3) Tried a manual hard reset and firmware downgrade (same problem persists with downgraded firmware) and again upgrade.
4) Tried different operating systems (Windows 8, Windows 7, Ubuntu 12.04). Same problem exists with each of them.
[code]....
A friend has 2 Asus RT-N66U's for the purpose of extending wifi range from her small companies shop to her house which is next door from each other.
from the house I can connect to the first router via wifi with a decent signal strength but what I need to do is backhaul from the other router via wifi and then have another wifi network in the house.
can this be done with just the 2 routers, or should I be looking for a cheap point to point setup and 2 separate routers?
when I log onto the PC, I have to reset the local network adapter in order to go online - it solves the problem every time. The real issue is with the laptop. It keeps dropping connection and, even when it shows up with a full signal, it can't connect to the internet and, when it does, it's really, really slow. I've tried resetting the IP address, I've gone in to make sure the network isn't hidden, I've checked the WEP key, I've even had it right next to the pc (which works only marginally, occasionally).We can't afford to buy another new laptop and I can't work out what the problem is.
View 14 Replies View RelatedOn my asus laptop, wireless does not work. It works when connected with ethernet cable. Signal show wireless strength excellent but it does not work wireless.
View 2 Replies View RelatedI'm standing beside my wireless access point with my laptop. It shows full signal in my laptop but I cannot connect to internet. I clicked on the view available networks and then the SSID names, typed my network key, and clicked "connect". It keeps on connecting, connecting and finally disappears and WAN connection remains with crossed mark. But it shows full signal in laptop and I'm standing beside the WAP.
View 4 Replies View RelatedMy netbook have decided to stop pickingup the wifi in my house. My parents laptop picks it up and my iPod picks it up but for some reason it won't pick it up any more?
View 1 Replies View RelatedWe purchased our son a Netbook for Christmas - all of our other laptops will connect to our MiFi (Verizon) device but NOT the Netbook?? It states Excellent Strength but after attempting to connect states Failed to associate with the unit.
View 3 Replies View Relatedwindows ce netbook will not connect to my home wifi
View 1 Replies View Relatedmy net book does not launch WiFi on startup. Wireless assistant button's light is not on. when i launch my comp it says me module(701) error.
View 1 Replies View RelatedI am running on Windows Vista and out of no where I cannot connect to my network %70 of the time. When I can connect I have local access and a full bar signal but no Internet access. But when I have internet access every page takes forever to load (if it even loads). I tried reinstalling my drivers and even hanged some registry stuff. My wireless card 8.11g by Broadcom.
View 3 Replies View RelatedI have a Sony Vaio SVE1512B1EW and have connected it to my wireless. Works absolutely fine. However recently whenever I turn on my laptop the Internet will work for 2 minutes and then not work, even though it says its connected at full bar signal. When this happened again I tried the Internet on a different laptop and found that it is not the wireless! What will I do? It's telling me there's a connection but not working?
View 3 Replies View RelatedGot a new e1000 after a RMA. The new unit has a very weak wifi signal. I've tried all different channels. It is running in mixed mode. No microwave, blue-tooth or other noise. 4 feet from the router and the signal is down to -90db. Take a few more steps away and the connection is lost.
View 2 Replies View RelatedI have Att internet services and the modem I received from them has WiFi with it. The signal that it produces is very weak. I was curious if there is any way to use my E3000 to boost or repeat the signal so WiFi will extend through out the house.
View 4 Replies View Relatedall other devices have excelent signal
View 5 Replies View RelatedMy new EA4500 works fine all day, both wireless and wifi, on both bands, but nearly every evening, the wifi signal disappears, as shown on a wifi app for my smart phone, but not on Issid on my laptop, strangely, and my PC laptop and iPad both disconnect, then reconnect. Smart phone disconnects too. It isn't like the signal drops in strength, it just goes away! I have tried various settings on modes, and bandwidths, I am using different SSID's on each band, WPA2 security with a long non-dictionary passphrase and MAC filtering. The hardwire connection works great at 30+ Mbps even when the wifi is disappearing from the wifi scanner and the wifi connections are dropping. In other words, the cable connection/modem is working fine, but the wifi radio signal stops or the SSID drops off the signal. I really can't tell, but I know it is becoming very frustrating. The old WRT54GS works fine if I put it back on-line in the evening when these things start to happen.
I have turned off everything I can think of in the house that transmits or might transmit, in case it is an interference thing. I have tried disabling the 5 GHz side, since I can't see what is happening on that band, and the last thing I tried was changing the MTU from 1500 to 1400. So far, the past evening, it was okay, but I am not confident it will stay that way.
I've had a LinkSys BEFW11S4 wireless router for several years now -- ever since it first came out (this is a version 1, not even a version 2).
View 3 Replies View RelatedI recently bought the top end ea4500 hoping its "high end" claims would get a better wifi signal in my bedroom(on my iphone 4s) than what i was getting with my WRT54G.The end result is it constantly drops signal completely or shows my network but when I try to connect says "cannot connect to wireless network" even though it's staring me right in the face. When I hook my WRT54G up, I get a signal.. all be it weak, but at least it doesn't drop out on me.Did I just waste almost $200 on a high end router that can't push a signal out stronger than my almost 7 year old WRT54G? or am i missing some setting that will make this EA4500 worth its claims? settings info:everything is pretty much on "default" aside from the SSIDs for the different bands and the corresponding WPA passwords.
also another problem, it seems like the router itself craps out every 60-120 minutes, no leds lit up on the router and my modem (Cisco DCP3010) shows no "link". Yet when hooked directly to the PC there is a "link", so pretty sure its the router and not the modem.