2x Asus RT-N66Us - How To Get Good Signal Strength From Next Door Router
Sep 12, 2012
A friend has 2 Asus RT-N66U's for the purpose of extending wifi range from her small companies shop to her house which is next door from each other.
from the house I can connect to the first router via wifi with a decent signal strength but what I need to do is backhaul from the other router via wifi and then have another wifi network in the house.
can this be done with just the 2 routers, or should I be looking for a cheap point to point setup and 2 separate routers?
View 1 Replies
ADVERTISEMENT
Dec 10, 2012
I have recently bought a new wireless card and it is giving me grief. Until now I had been using a laptop to pick up the wireless signal from my router, and pass it along to my PC, and have been receiving excellent speeds (30 Megabit) despite being 2 floors above the router.
I bought myself a Sitecom N300 card to go in the PCI slot of my computer, and my connection is generally extremely slow, and often drops completely for minutes at a time. The strange thing, however, is that it still shows medium to strong signal strength, even when the connection drops completely!
This is completely baffling me! I can't work out what could be causing interference, or why the signal strength doesn't go down when the signal does, or why the internal laptop wi-fi receiver seems so much better than this new card with 2 massive aerials. Unfortunately my ability to move either my PC or router is somewhat limited
I'm running Windows 7, fully up-to-date, and the router is a BT Home Hub 3
View 12 Replies
View Related
Sep 1, 2012
I have Asus WL-520GU router, about 2 years old. I hardly experienced any troubles with this guy so far as the router sits next to my laptop. Recently, I started working in the living room at wee hours of the day and I noticed that I do not get much signal, plus it drops so many times that working in the living room has become a nightmare. Its not that I live in a Presidential Palace but actually its as small as a chicken coop.
- I used inSSIDer to find out any interference. My router was using channel 1, although it was set to auto. Majority of routers in our apartment block use channel 1 or 11 (ALL Linksys, except me and an Apple guy) at 2.4GHz. I changed the channel to 3.
- I checked the firmware of the router. Its 3.0.0.8. Asus website gives me a list of firmware upgrades but I am not too sure if there is indeed any upgrade for the routers in the US.
I am not smart enough to install DD-WRT so staying away from it unless I find any didactic instructions. DD-WRT site is not for me.
- I am considering hanging router on the wall with Aluminium file behind the antenna.
- I am considering changing the antenna. The antenna is 2dBi. I found a few antennas on ebay, 5dBi, 7dBi, 9dBi, 10 dBi, 12 dBi, 16dBi May be I will replace the antenna with one of these. Any specific I should use? (I don't know if there is any limitation or disadvantage of using higher dBI antenna.)
- Lastly, I am considering buying a refurbished Linksys E1000 or E1200 router and connect both using ethernet cable, so that one of these guys act as a repeater.
View 3 Replies
View Related
Aug 9, 2011
On my asus laptop, wireless does not work. It works when connected with ethernet cable. Signal show wireless strength excellent but it does not work wireless.
View 2 Replies
View Related
Oct 16, 2011
I have metal framing in our house and wireless signal is always a problem is there a way to boost my signal strength?
View 1 Replies
View Related
Dec 28, 2011
Any way to test a wireless router signal strength?
View 2 Replies
View Related
May 12, 2012
My router has wireless capability and the signal inside my home is pretty strong so I have no compaints there. The problem comes in when I use my computer which is located in a shed outside. I get a signal maybe 35% of the time, and even then it's weak. I want to use an access point to allow the computer in the shed to aquire internet access. Do I need to hardwire the access point or can I do it wirelessly? Would a repeater be more effective and which config would be best in that case?
View 2 Replies
View Related
Jul 20, 2011
I'm trying to increase signal strength on my netgear router for my house.
View 4 Replies
View Related
Apr 8, 2013
Region : India
Model : TL-MR3220
Hardware Version : V2
Firmware Version :
ISP : Reliance Net Connect
I called Customer Care and confirmed that MR3220 supports ZTE AC2738 Model even though it is not there in Compatible list. But when i actually configured- It is showing as Modem Identified but signal strenth is showing Zero.
View 3 Replies
View Related
Mar 14, 2013
My house is wired so any demanding network transfers are done over the wired network, wireless is reserved for casual stuff. This month my internet connection is eventually going to exceed 100Mbps so I need to dump my WRT54G and while I'm sure the RT-N66U is very nice, I could save $100 buying the RT-N16.
I have a gigabit switch that works great and handles all of the local traffic, I just need the router for DHCP, NAT, basic wireless connectivity, and it needs to be able to pull in over 100Mbps from the internet. So is the RT-N16 adequate for me?
View 12 Replies
View Related
Oct 30, 2012
How can I determine my DIR 601 router signal strength ?
View 2 Replies
View Related
Mar 12, 2012
I have a linksys router,I reset it and hooked it up,but I don't get internet even though the signal is excellent
View 1 Replies
View Related
Mar 31, 2012
I have a wireless network in my home, mainly for internet access via any of the 3 or 4 machines we may be using. Normally, there's not a problem with normal surfing, email checking, youtube, etc.My wireless router is a Linksys WRT300N, and the wireless adapter card in my desktop is a D-Link AirPlus G DWL-G510 Wireless PCI Adapter. In my previous home, the router was in the very same room as my desktop, and had no problems to speak of with this setup streaming Netflix. Now, however, I'm set up in an older home, and the router is removed from my desktop by a few walls and tight rooms. I've noticed that my network status icon on the bottom right of my desktop seems to always show "Signal Strength: Very Low".I like to use my desktop sometimes to stream Netflix. My Netflix streaming sometimes goes OK, but typically it just freezes and shows the Loading bar, and sometimes doesn't really start back. It is so bad sometimes, that I am not willing to wait it out, because I know from this experience that even if it starts back up, it will just freeze again. The video is not downloading and caching fast enough.
View 5 Replies
View Related
Mar 28, 2011
-My landlord has his modem/router connected by a wire that runs downstairs to my desktop computer; and my desktop computer's internet is excellent. -I have a laptop in the other room that is connected wirelessly to my landlord's router with poor internet strength. -I have a spare linksys wireless G broadband router that is not being used.
How can I use this router to increase the signal strength on my laptop in the other room?
View 3 Replies
View Related
Oct 16, 2011
My wireless router has been spotty since my cable company installed a new modem for cable internet. I have powercycled several times, downloaded new firmware, rebooted and am still having problems. Lately when I do finally get on the internet with a wireless device, the signal strength is very low. It is low on my iphone, on my Mac laptop and also on my Samsung Bluray player. Lately a window keeps popping up when I am trying to watch netflix that states my band width is too low, even though it has been working fine for 2 months. Is my router outdated?
View 5 Replies
View Related
Jun 24, 2012
My wireless signal strength on my DIR 615 router varies between 57% and 63%. I don't understand why it's not 100%. Is there a way to tweak it up ?
View 2 Replies
View Related
Oct 5, 2012
I recently moved into a larger 2 story house, and for the first few months I was using a Linksys E1000 I've had for about 2 years now. It's a fine single band router, but the people upstairs and the xbox/PS3 in the living room didnt have the strongest connection.
I shopped around and finally got a ASUS RT-N66U for a really good, strong dual band router that would supposedly give better range and performance than my old E1000.
Unfortunately, since I got it everyone is having issues they never had before, namely:Signal dropping all around the house and having to search for the network much slower performance than before the xbox/PS3 cant hold a stable connection even for a few minutes now, when before you could watch Netflix HD programs easily
I've upgraded the Firmware to 3.0.0.3.178 since I heard earlier firmwares had issues, but other than that and opening my ports for qTorrent it is relatively stock settings.
View 2 Replies
View Related
Sep 24, 2012
Currently I'm using one e4200 (v1) as my main router in the house. The wireless coverage downstairs is perfect, but upstairs the signal is weak. To improve this I thought about adding the WAP610N as an access point to my network. But this device gets quite some negative reviews ... Thus I was thinking why not add another e4200 (v2) to my network? The price difference is not that big, especially compared to other simultaneous dual band access points. So my question is, would following scenario work?
- first e4200, connected to my ISP, acting as a router, using both the 2.4 as 5 ghz band (basically my current situation)
- second e4200, connected (via UTP cable) to the first e4200, in bridge mode
- second e4200 also using both 2.4 and 5 ghz band, using the same SSID, security etc but a different channel
So when moving a laptop for example from downstairs to upstairs, automatically the router/access point with the strongest signal would be used.
View 2 Replies
View Related
Nov 29, 2010
We have a new e1000 router that was having trouble reaching the TV for Netflix movie streaming. Too many walls and too much distance. A simple solution was to direct the signals from the router by placing aluminum foil behind the router so all the signal was going towards the TV rather than in an 360 degree circle. Now the streaming works great! After the movie is done I remove the foil and everything looks just like it should.
View 9 Replies
View Related
Jul 6, 2011
I have a new e3000 series router and on all pc's I'm using model AE1000 receivers. Now, the laptops we use work great until we go out to a room built off the main house (a seasonal porch)
View 2 Replies
View Related
Nov 26, 2010
I have configured a new LinkSys e3000 as as wireless router in our house.I have left the configuration as default (only secured it and turned on the DHCP server).I have only turned on the 2,4 GHz network ( because the 5GH had an even shorter range).Everything works and all my devices can connect to the router and access the internet.However i find the signal strenght of the router to be very poor.Already in the next room it drops to 60%. And in some rooms on the 1st floor the signal drops completly.This happens not even 20m away from the router in an ordinary "family house".Is there a setting somewhere which could increase the signal strength ?I noticed that the router has no antenna, can one be bought and attached so the signal increases ?The firmware version is 1.0.02 and i found a newer on your web 1.0.03. How to improve the signal strength?
View 6 Replies
View Related
Oct 29, 2012
I have a two story house with a basement. Right now I have a Cisco Linksys E4200 router on the second floor in one of the bedrooms. I have a DLink GamerLouge 4500 in the basement. Both systems have the same SSID and are running on different channels. Computers connect to the appropriate one automatically. At least assuming that's what's happening.I am getting limited connectivity on the first floor in the kitchen and family room. Dining room, right by the second floor stairs is fine. All the bathrooms are dead zones. Note I have thick travertine tiles on the walls in the bathrooms so may inhibit signals. Trying to figure out the optimal solution for getting the house setup so everywhere has at least decent signals. I have alot of iPad and laptop devices floating around the house so wireless is key. Note I have wired plugs with Cat5e all over the house to a central hub in the basement which is where the DLink router sits. Thoughts on how to improve my signal strength? Especially in the farther reaching bedrooms and the first floor
View 4 Replies
View Related
Jan 5, 2010
For some reason my ps3 wont connect,the signal strength is 100% but it just times out.it will randomly connect BUT cant stream anything or connect online.Or it will get disconnected if someone turns on my mine computer in the other room/Should i DMZ the ps3?Routers a WRT610N dual N Firmware Version: 2.00.00 B05 cant upgrade to 3.00 because of "upgrade failed" error.
View 9 Replies
View Related
May 7, 2012
What signal strength should I expect when in the same room as the e4200 ?I'm checking signal strength with iStumbler and with option-right click on airport menu icon on my Mac.I'm getting a signal strength of about -55 while in the room with the router.What signal strength should I expect while in the same room, no physical obstructions, etc. ?
View 6 Replies
View Related
Aug 20, 2011
I went out and bought a e4200 today and the signal strength is worse than my WGT300n, is there any tweaks I can do to expand my signal strength?
View 3 Replies
View Related
Oct 7, 2011
I have a WRT54gh, and the signal strength is extremely poor. Full strength at about 15 centimeters, Then drops to 50% at 50 centimeters. By 1.5 meters, the signal is extremely weak or not visible. Have updated to the latest firmware, factory reset and power cycled. There are no other wireless networks or devices that would provide interference Have experimented with channels, thresholds, transmit type, encrypted/open, intervals etc..No luck. Due to signal dropping off so quickly it seems like a transmit strength issue rather than an issue that can be solved in the menu. I'm wondering if there's a way I can console log-in to the Linux kernel and check the transmit strength and perhaps bump it up by a few DB? It's out of warranty so a solution involving opening the case is also acceptable.
View 9 Replies
View Related
Aug 30, 2012
I have been disappointed by the range of the EA4500 compared to previous routers, but I am most puzzled by it's behavior. I may get an "excellent" connection close to the router (one room away) and speeds up to 65 Mps, but after a few minutes of surfing the web the signal strength and speed can drop substantially.
The problem is the worst at a distance (one floor down in our house, maybe 30 feet away in total) where the signal strength may start at "good" and a speed of perhaps 30 Mps, but then after 3-4 minutes drops to "poor" and maybe 5 Mps.
View 4 Replies
View Related
Dec 10, 2012
Have two WRT54G Wireless Routers.
-One WRT54G ver. 6, Firmware Version v1.028
-One WRT54G ver. 6, Firmware Version v2.x
With the WRT54G ver. 6, Firmware Version v1.028.When I ran the android app WiFi Analyzer, I get mixed results.On my Samsung Galaxy S3, I saw my signal on Channel 2, and others around me (two on Channel 6 and two on Channel 11).On my ASUS Transformer Prime TFT201 I see the same signals, but my router signal bounces continously between the baseline (-100dBm?) and about -35dBm.
Plugged in the WRT54G ver. 2, Firmware Version v2.x Channel 8.Hooked it up and got good steady signal strength. It Had 'WPA - Shared Key' but did not have the 'WPA - Personal' that was on the ver. 6. So, I had to go and screw things up. I've upgraded this to Firmware Version: v4.21.5 and guess what? I now have 'WPA - Personal'. I also have a signal is bouncing on BOTH units.
On my ASUS, I can see both routers. The ver. 2 AND the ver. 6 are bouncing between baseline and -35dBm, in unison. Apprently something in the ASUS does not like the later Firmwares.On my Samsung I can see the two signals - the ver. 2 on Channel 8 is stable as a rock and the ver. 6 on Channel 2 is also bouncing, but at a much slower rate! Running Speedtest.net a PC hardwired to the ver. 2 - I get 5.34 Mb/s Download and 0.47 Mb/s upload (yeah, my Internet sucks!) Running Speedtest.net through the ASUS/WiFi to the ver. 2 - I get 2.43 Mb/s Down and 0.65 Mb/s Up.Running Speedtest.net through the Samsung/WiFi to the ver. 2 - I get 5.07 Mb/s Down and 1.07 Mb/s Up.
View 6 Replies
View Related
Jan 27, 2012
Just got an E2500 and installed it with no problems and it was working correctly for 1-2 days. This evening the signal strength of my SSID dropped to LOW and a new SSID now shows up with full signal strength. It s not an SSID from any of my neighbors and from checking several forums it appears this is known problem.
View 2 Replies
View Related
Apr 5, 2011
I am in a location where I can pick up great wifi signal, but when I connect to this unsecured signal, my page won't load. I ran a diagnostics & Association failed. I would also like to mention that I am also configured to use a broadband usb through a cell phone carrier, but if I can get the wifi free, I certainly don't want to pay for the broadband.By the way, it's an XP operating system.
View 1 Replies
View Related
Jan 22, 2013
We have 3 laptops and Verizon high speed wireless internet. I cannot access internet on my Acer it appears that Mozilla Firefox has been "firewalled".
View 3 Replies
View Related
Jan 19, 2012
My advent 4489 netbook is receiving a strong wireless signal but is unable to connect to the internet.
View 1 Replies
View Related
May 9, 2011
I work on an HP desktop that used to be able to connect to the wireless network. We moved offices and and I am unable to connect to the new wireless network.The network used to appear but had no signal strength. Now the network does not even appear.
View 14 Replies
View Related
