Region : India
Model : TL-MR3220
Hardware Version : V2
Firmware Version :
ISP : Reliance Net Connect
I called Customer Care and confirmed that MR3220 supports ZTE AC2738 Model even though it is not there in Compatible list. But when i actually configured- It is showing as Modem Identified but signal strenth is showing Zero.
My wireless signal strength on my DIR 615 router varies between 57% and 63%. I don't understand why it's not 100%. Is there a way to tweak it up ?
View 2 Replies View RelatedI have my DIR-655 router set up on the first floor because my son's tricked out gaming rig is in the basement while our office is on the 2nd floor. On the router, I tweaked settings to give him priority speed when he is gaming. Although he complains about his speeds and connectivity. In our 2nd floor office -- which is one floor and 30 ft through a wall away -- my signal strength varies from 45% to 70%. There are times when neighbor's networks show greater strength than mine does. I live in a house so the physical distance is much greater plus there are two exterior walls, no matter where their router is placed. The adapter in the office computer is a D-Link DWA-556.
View 9 Replies View RelatedMy question has to do with the low signal strength of my dir-655. I have it set up in the second bedroom of my apartment. When I am sitting in my living room (about 30 feet away) it's really hard to pull in a signal of more than one bar on my phone, or two bars on my wife's kindle fire and will often drop the signal all together. But, if I search for networks, tons of other routers come up with excellent signal strength from our neighbors. Is there something I need to know about expanding the signal strength?
View 3 Replies View RelatedI have connected my DIR-825 to my cable modem through the network ports and completed the configuration. Everything works fine, I am able to connect through wireless to the DIR-825 and access the internet. I had to do this as my cable modem is also wireless and does not allow another router to be connected through the internet connection, but I want to get a better signal stength than the cable modem.When I am not wireless connected, I can see the two bands at full strength in the view available wireless networks screen. As soon as I connect to either the 2.4 channel or the 5 channel, the signal strenth of the channel I'm connected to drops to horrible, while the non-connected one still shows at full strength.i tried disabling one of the channels, but as soon as I connect to the other, that channels signal strength still drops to horrible.
View 1 Replies View RelatedEven though I put high gain antennas on my routers which extended the range of good signal immensely, I wish to try to get even better signal strength also. When using manual configuration mode on the router, I have set the WiFi power level to 100% (default level). Is there a way to increase that level beyond 100% and "overdrive" the signal? I tried to input a number >100% and that was not accepted.
I know this is possible if I go to dd-wrt, and possibly with open-wrt, which I prefer not to do for various reasons, not the least of which is that I have both a Rev. A1 and a Rev. B1 router (Rev. A1 is not supposed to support dd-wrt). I also know that increasing the power will make the router run hotter. I am willing to risk it as I monitor the temperature regularly.
Has anyone ever tried to do this or, have the people who want this just gone to dd-wrt? From the dd-wrt forum it appears that the DIR-825 router in Rev. B1 is not very user friendly to dd-wrt. After 3 years the code is still flaky. I would prefer not to use it, if possible.
I have a DIR-825 in my basement at one end of the house and it works great. My problem is the signal strength is a little weak on the main floor at the other end of the house. I would like to add a second access point to cover that end of the house. Do I need to get another DIR-825 and wire it to the original or is there another option? I obviously don't need all the features of the DIR-825 for the 2nd AP, but I cant find a less expensive option that will still allow me to use both bands.
View 6 Replies View RelatedI have a DLink 2740B and 4Mbps account.I get great signal strength but browsing is realllllllly bad...but when i do a speed test, i get about 3.2 to 3.5.I tried all kinds of sites, torrents, downloading files....hell...even google.com doenst load sometimes.
View 1 Replies View RelatedRegion : Denmark
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23 Build 121225 Rel.37950n
ISP : Fullrate
No matter what I try, the signal strength never gets better that 30%, even when I have my laptop next to the router. I have tried various settings (found in these forums), but nothing seem to work. My old D-Link performed better, both close and over distances.
I have metal framing in our house and wireless signal is always a problem is there a way to boost my signal strength?
View 1 Replies View RelatedAny way to test a wireless router signal strength?
View 2 Replies View RelatedMy router has wireless capability and the signal inside my home is pretty strong so I have no compaints there. The problem comes in when I use my computer which is located in a shed outside. I get a signal maybe 35% of the time, and even then it's weak. I want to use an access point to allow the computer in the shed to aquire internet access. Do I need to hardwire the access point or can I do it wirelessly? Would a repeater be more effective and which config would be best in that case?
View 2 Replies View RelatedI'm trying to increase signal strength on my netgear router for my house.
View 4 Replies View RelatedHow can I determine my DIR 601 router signal strength ?
View 2 Replies View RelatedI have a linksys router,I reset it and hooked it up,but I don't get internet even though the signal is excellent
View 1 Replies View RelatedI have a wireless network in my home, mainly for internet access via any of the 3 or 4 machines we may be using. Normally, there's not a problem with normal surfing, email checking, youtube, etc.My wireless router is a Linksys WRT300N, and the wireless adapter card in my desktop is a D-Link AirPlus G DWL-G510 Wireless PCI Adapter. In my previous home, the router was in the very same room as my desktop, and had no problems to speak of with this setup streaming Netflix. Now, however, I'm set up in an older home, and the router is removed from my desktop by a few walls and tight rooms. I've noticed that my network status icon on the bottom right of my desktop seems to always show "Signal Strength: Very Low".I like to use my desktop sometimes to stream Netflix. My Netflix streaming sometimes goes OK, but typically it just freezes and shows the Loading bar, and sometimes doesn't really start back. It is so bad sometimes, that I am not willing to wait it out, because I know from this experience that even if it starts back up, it will just freeze again. The video is not downloading and caching fast enough.
View 5 Replies View Related-My landlord has his modem/router connected by a wire that runs downstairs to my desktop computer; and my desktop computer's internet is excellent. -I have a laptop in the other room that is connected wirelessly to my landlord's router with poor internet strength. -I have a spare linksys wireless G broadband router that is not being used.
How can I use this router to increase the signal strength on my laptop in the other room?
My wireless router has been spotty since my cable company installed a new modem for cable internet. I have powercycled several times, downloaded new firmware, rebooted and am still having problems. Lately when I do finally get on the internet with a wireless device, the signal strength is very low. It is low on my iphone, on my Mac laptop and also on my Samsung Bluray player. Lately a window keeps popping up when I am trying to watch netflix that states my band width is too low, even though it has been working fine for 2 months. Is my router outdated?
View 5 Replies View RelatedCurrently I'm using one e4200 (v1) as my main router in the house. The wireless coverage downstairs is perfect, but upstairs the signal is weak. To improve this I thought about adding the WAP610N as an access point to my network. But this device gets quite some negative reviews ... Thus I was thinking why not add another e4200 (v2) to my network? The price difference is not that big, especially compared to other simultaneous dual band access points. So my question is, would following scenario work?
- first e4200, connected to my ISP, acting as a router, using both the 2.4 as 5 ghz band (basically my current situation)
- second e4200, connected (via UTP cable) to the first e4200, in bridge mode
- second e4200 also using both 2.4 and 5 ghz band, using the same SSID, security etc but a different channel
So when moving a laptop for example from downstairs to upstairs, automatically the router/access point with the strongest signal would be used.
We have a new e1000 router that was having trouble reaching the TV for Netflix movie streaming. Too many walls and too much distance. A simple solution was to direct the signals from the router by placing aluminum foil behind the router so all the signal was going towards the TV rather than in an 360 degree circle. Now the streaming works great! After the movie is done I remove the foil and everything looks just like it should.
View 9 Replies View RelatedI have a new e3000 series router and on all pc's I'm using model AE1000 receivers. Now, the laptops we use work great until we go out to a room built off the main house (a seasonal porch)
View 2 Replies View RelatedI have configured a new LinkSys e3000 as as wireless router in our house.I have left the configuration as default (only secured it and turned on the DHCP server).I have only turned on the 2,4 GHz network ( because the 5GH had an even shorter range).Everything works and all my devices can connect to the router and access the internet.However i find the signal strenght of the router to be very poor.Already in the next room it drops to 60%. And in some rooms on the 1st floor the signal drops completly.This happens not even 20m away from the router in an ordinary "family house".Is there a setting somewhere which could increase the signal strength ?I noticed that the router has no antenna, can one be bought and attached so the signal increases ?The firmware version is 1.0.02 and i found a newer on your web 1.0.03. How to improve the signal strength?
View 6 Replies View RelatedA friend has 2 Asus RT-N66U's for the purpose of extending wifi range from her small companies shop to her house which is next door from each other.
from the house I can connect to the first router via wifi with a decent signal strength but what I need to do is backhaul from the other router via wifi and then have another wifi network in the house.
can this be done with just the 2 routers, or should I be looking for a cheap point to point setup and 2 separate routers?
I have a two story house with a basement. Right now I have a Cisco Linksys E4200 router on the second floor in one of the bedrooms. I have a DLink GamerLouge 4500 in the basement. Both systems have the same SSID and are running on different channels. Computers connect to the appropriate one automatically. At least assuming that's what's happening.I am getting limited connectivity on the first floor in the kitchen and family room. Dining room, right by the second floor stairs is fine. All the bathrooms are dead zones. Note I have thick travertine tiles on the walls in the bathrooms so may inhibit signals. Trying to figure out the optimal solution for getting the house setup so everywhere has at least decent signals. I have alot of iPad and laptop devices floating around the house so wireless is key. Note I have wired plugs with Cat5e all over the house to a central hub in the basement which is where the DLink router sits. Thoughts on how to improve my signal strength? Especially in the farther reaching bedrooms and the first floor
View 4 Replies View RelatedFor some reason my ps3 wont connect,the signal strength is 100% but it just times out.it will randomly connect BUT cant stream anything or connect online.Or it will get disconnected if someone turns on my mine computer in the other room/Should i DMZ the ps3?Routers a WRT610N dual N Firmware Version: 2.00.00 B05 cant upgrade to 3.00 because of "upgrade failed" error.
View 9 Replies View RelatedWhat signal strength should I expect when in the same room as the e4200 ?I'm checking signal strength with iStumbler and with option-right click on airport menu icon on my Mac.I'm getting a signal strength of about -55 while in the room with the router.What signal strength should I expect while in the same room, no physical obstructions, etc. ?
View 6 Replies View RelatedI went out and bought a e4200 today and the signal strength is worse than my WGT300n, is there any tweaks I can do to expand my signal strength?
View 3 Replies View RelatedI have a WRT54gh, and the signal strength is extremely poor. Full strength at about 15 centimeters, Then drops to 50% at 50 centimeters. By 1.5 meters, the signal is extremely weak or not visible. Have updated to the latest firmware, factory reset and power cycled. There are no other wireless networks or devices that would provide interference Have experimented with channels, thresholds, transmit type, encrypted/open, intervals etc..No luck. Due to signal dropping off so quickly it seems like a transmit strength issue rather than an issue that can be solved in the menu. I'm wondering if there's a way I can console log-in to the Linux kernel and check the transmit strength and perhaps bump it up by a few DB? It's out of warranty so a solution involving opening the case is also acceptable.
View 9 Replies View RelatedI have been disappointed by the range of the EA4500 compared to previous routers, but I am most puzzled by it's behavior. I may get an "excellent" connection close to the router (one room away) and speeds up to 65 Mps, but after a few minutes of surfing the web the signal strength and speed can drop substantially.
The problem is the worst at a distance (one floor down in our house, maybe 30 feet away in total) where the signal strength may start at "good" and a speed of perhaps 30 Mps, but then after 3-4 minutes drops to "poor" and maybe 5 Mps.
Have two WRT54G Wireless Routers.
-One WRT54G ver. 6, Firmware Version v1.028
-One WRT54G ver. 6, Firmware Version v2.x
With the WRT54G ver. 6, Firmware Version v1.028.When I ran the android app WiFi Analyzer, I get mixed results.On my Samsung Galaxy S3, I saw my signal on Channel 2, and others around me (two on Channel 6 and two on Channel 11).On my ASUS Transformer Prime TFT201 I see the same signals, but my router signal bounces continously between the baseline (-100dBm?) and about -35dBm.
Plugged in the WRT54G ver. 2, Firmware Version v2.x Channel 8.Hooked it up and got good steady signal strength. It Had 'WPA - Shared Key' but did not have the 'WPA - Personal' that was on the ver. 6. So, I had to go and screw things up. I've upgraded this to Firmware Version: v4.21.5 and guess what? I now have 'WPA - Personal'. I also have a signal is bouncing on BOTH units.
On my ASUS, I can see both routers. The ver. 2 AND the ver. 6 are bouncing between baseline and -35dBm, in unison. Apprently something in the ASUS does not like the later Firmwares.On my Samsung I can see the two signals - the ver. 2 on Channel 8 is stable as a rock and the ver. 6 on Channel 2 is also bouncing, but at a much slower rate! Running Speedtest.net a PC hardwired to the ver. 2 - I get 5.34 Mb/s Download and 0.47 Mb/s upload (yeah, my Internet sucks!) Running Speedtest.net through the ASUS/WiFi to the ver. 2 - I get 2.43 Mb/s Down and 0.65 Mb/s Up.Running Speedtest.net through the Samsung/WiFi to the ver. 2 - I get 5.07 Mb/s Down and 1.07 Mb/s Up.
Just got an E2500 and installed it with no problems and it was working correctly for 1-2 days. This evening the signal strength of my SSID dropped to LOW and a new SSID now shows up with full signal strength. It s not an SSID from any of my neighbors and from checking several forums it appears this is known problem.
View 2 Replies View RelatedI work on an HP desktop that used to be able to connect to the wireless network. We moved offices and and I am unable to connect to the new wireless network.The network used to appear but had no signal strength. Now the network does not even appear.
View 14 Replies View RelatedIs there a way to view my exact signal strength(say in % I guess) with my laptop running windows 7?I had software for the wireless card in my tower pc which gave a signal strength of 70%. I'm curious if my laptop is getting a similar strength since they are close but a few feet apart. Or where in my house gets the best signal other than just showing low-excellent.
View 4 Replies View Related