D-Link DIR-655 :: Low Signal Strength In Room
Mar 16, 2012
My question has to do with the low signal strength of my dir-655. I have it set up in the second bedroom of my apartment. When I am sitting in my living room (about 30 feet away) it's really hard to pull in a signal of more than one bar on my phone, or two bars on my wife's kindle fire and will often drop the signal all together. But, if I search for networks, tons of other routers come up with excellent signal strength from our neighbors. Is there something I need to know about expanding the signal strength?
View 3 Replies
ADVERTISEMENT
Mar 28, 2011
-My landlord has his modem/router connected by a wire that runs downstairs to my desktop computer; and my desktop computer's internet is excellent. -I have a laptop in the other room that is connected wirelessly to my landlord's router with poor internet strength. -I have a spare linksys wireless G broadband router that is not being used.
How can I use this router to increase the signal strength on my laptop in the other room?
View 3 Replies
View Related
May 7, 2012
What signal strength should I expect when in the same room as the e4200 ?I'm checking signal strength with iStumbler and with option-right click on airport menu icon on my Mac.I'm getting a signal strength of about -55 while in the room with the router.What signal strength should I expect while in the same room, no physical obstructions, etc. ?
View 6 Replies
View Related
Mar 25, 2011
I have my DIR-655 router set up on the first floor because my son's tricked out gaming rig is in the basement while our office is on the 2nd floor. On the router, I tweaked settings to give him priority speed when he is gaming. Although he complains about his speeds and connectivity. In our 2nd floor office -- which is one floor and 30 ft through a wall away -- my signal strength varies from 45% to 70%. There are times when neighbor's networks show greater strength than mine does. I live in a house so the physical distance is much greater plus there are two exterior walls, no matter where their router is placed. The adapter in the office computer is a D-Link DWA-556.
View 9 Replies
View Related
Apr 8, 2013
Region : India
Model : TL-MR3220
Hardware Version : V2
Firmware Version :
ISP : Reliance Net Connect
I called Customer Care and confirmed that MR3220 supports ZTE AC2738 Model even though it is not there in Compatible list. But when i actually configured- It is showing as Modem Identified but signal strenth is showing Zero.
View 3 Replies
View Related
Nov 21, 2011
I have connected my DIR-825 to my cable modem through the network ports and completed the configuration. Everything works fine, I am able to connect through wireless to the DIR-825 and access the internet. I had to do this as my cable modem is also wireless and does not allow another router to be connected through the internet connection, but I want to get a better signal stength than the cable modem.When I am not wireless connected, I can see the two bands at full strength in the view available wireless networks screen. As soon as I connect to either the 2.4 channel or the 5 channel, the signal strenth of the channel I'm connected to drops to horrible, while the non-connected one still shows at full strength.i tried disabling one of the channels, but as soon as I connect to the other, that channels signal strength still drops to horrible.
View 1 Replies
View Related
Apr 5, 2013
Even though I put high gain antennas on my routers which extended the range of good signal immensely, I wish to try to get even better signal strength also. When using manual configuration mode on the router, I have set the WiFi power level to 100% (default level). Is there a way to increase that level beyond 100% and "overdrive" the signal? I tried to input a number >100% and that was not accepted.
I know this is possible if I go to dd-wrt, and possibly with open-wrt, which I prefer not to do for various reasons, not the least of which is that I have both a Rev. A1 and a Rev. B1 router (Rev. A1 is not supposed to support dd-wrt). I also know that increasing the power will make the router run hotter. I am willing to risk it as I monitor the temperature regularly.
Has anyone ever tried to do this or, have the people who want this just gone to dd-wrt? From the dd-wrt forum it appears that the DIR-825 router in Rev. B1 is not very user friendly to dd-wrt. After 3 years the code is still flaky. I would prefer not to use it, if possible.
View 5 Replies
View Related
Jan 5, 2012
I have a DIR-825 in my basement at one end of the house and it works great. My problem is the signal strength is a little weak on the main floor at the other end of the house. I would like to add a second access point to cover that end of the house. Do I need to get another DIR-825 and wire it to the original or is there another option? I obviously don't need all the features of the DIR-825 for the 2nd AP, but I cant find a less expensive option that will still allow me to use both bands.
View 6 Replies
View Related
Jun 24, 2012
My wireless signal strength on my DIR 615 router varies between 57% and 63%. I don't understand why it's not 100%. Is there a way to tweak it up ?
View 2 Replies
View Related
Feb 21, 2011
I have a DLink 2740B and 4Mbps account.I get great signal strength but browsing is realllllllly bad...but when i do a speed test, i get about 3.2 to 3.5.I tried all kinds of sites, torrents, downloading files....hell...even google.com doenst load sometimes.
View 1 Replies
View Related
Mar 15, 2013
Region : Denmark
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23 Build 121225 Rel.37950n
ISP : Fullrate
No matter what I try, the signal strength never gets better that 30%, even when I have my laptop next to the router. I have tried various settings (found in these forums), but nothing seem to work. My old D-Link performed better, both close and over distances.
View 2 Replies
View Related
Dec 31, 2011
I received three things for Christmas: 1. Linksys WiFi E1200, 2. Pandigital Planet tablet, 3. Roku.My family room is on the same level as my Wifi router but about 70 feet apart, but I cannot get a wifi signal in the family room on the Pandigital tablet, however, the Roku seems to be receiving the wifi signal because the Roku works.Is my tablet not working correctly? Can and should my son increase the signal strength of the Linksys
View 5 Replies
View Related
Jun 1, 2009
i'm setting up a wireless network for a local B&B they currently have a Linksys WAG54GS ADSL router in one of the rooms but need the wireless signal to reach each guest room the house has thick brick walls and an upstairs.i was thinking of using 2 x repeaters, the WRE54G's, and to put one on the ground floor within range of the current ADSL router and to put another on the 1st floor within range of the repeater on the ground floor to receive the bounced signal.I don't know much about these repeaters and how they work exactly and so unsure if this would be a viable solution in my case.
View 6 Replies
View Related
May 9, 2011
I work on an HP desktop that used to be able to connect to the wireless network. We moved offices and and I am unable to connect to the new wireless network.The network used to appear but had no signal strength. Now the network does not even appear.
View 14 Replies
View Related
Jan 10, 2013
Is there a way to view my exact signal strength(say in % I guess) with my laptop running windows 7?I had software for the wireless card in my tower pc which gave a signal strength of 70%. I'm curious if my laptop is getting a similar strength since they are close but a few feet apart. Or where in my house gets the best signal other than just showing low-excellent.
View 4 Replies
View Related
Oct 16, 2011
I have metal framing in our house and wireless signal is always a problem is there a way to boost my signal strength?
View 1 Replies
View Related
May 16, 2011
I have three desktops and one lap. I have TWC RCA modem and cisco linksys router and two usb adapters for wireless connection. situation is this: the modem and router are at one end of the house and one of the pc's is located at the other end. that one gets low signal strength only one or two bars and the internet works slowly to a point it feels like i'm on dial up. I've had people tell me to upgrade the router from wrt45g to n which I did to an e1000, but I still have the same issue. also was told to move the modem and router to the center of the house. but twc says that would not correct the issue.
Something about dividing the mpbs and the farther the pc the lower the signal. so, guess my question would be 1. does that sound correct to you. would it be better to move the modem and router? would it be better to have the one in question wired in? I did try an extender by netgear, which gave more bars/signal strength but but then would not connect to the internet. but I did that before I got newer linksys router. not sure if maybe I should try the extender again, but then the geek squad, when they came an set up the new router, said that it would probably do the same thing.
View 9 Replies
View Related
Dec 17, 2012
How to boost signal strength on westell
View 1 Replies
View Related
Jun 3, 2012
I have computers scattered across our home, and in many areas it is not feasible to run ethernet cable. At one location (less than 30 feet away) but through multiple walls, I can barely connect to any POS (I have two). I added a stand alone antenna extension with long antennas on both the router and the WiFi card on the PC, however, this made zero improvement.What should I be looking to purchase to increase the signal strength? I've already tried different routers.
View 5 Replies
View Related
Mar 20, 2011
Is there a way to weaken the wrt54g signal strength? I have a client that has one of these setup and they say it's too strong and people can get it from too far away. Instead of locking it down so only certain people can get onto it like I asked they want to limit the strength of the signal so it only reaches two rooms. Is this possible?
View 3 Replies
View Related
Aug 11, 2011
My signal strength shows Excellent but my internet connection comes & goes all of a sudden.
Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:Users ebako>IPCONFIG /ALL
[Code].....
View 3 Replies
View Related
Dec 28, 2011
Any way to test a wireless router signal strength?
View 2 Replies
View Related
May 12, 2012
My router has wireless capability and the signal inside my home is pretty strong so I have no compaints there. The problem comes in when I use my computer which is located in a shed outside. I get a signal maybe 35% of the time, and even then it's weak. I want to use an access point to allow the computer in the shed to aquire internet access. Do I need to hardwire the access point or can I do it wirelessly? Would a repeater be more effective and which config would be best in that case?
View 2 Replies
View Related
Sep 14, 2011
Am running WIN 7 64 BIT and have today installed a BT Home Hub 3. WiFi signal is very poor. (1 1/2 bars only) Have Belkin Wireless G Card in computer and previously used it with Netgear DG834G router with very good signal strength.Do I now need to disable the Belkin card in order for the BT Hub to produce a decent signal?
View 1 Replies
View Related
Nov 9, 2012
works well upstairs but does not work well about sixty feet from the router
View 5 Replies
View Related
Jul 20, 2011
I'm trying to increase signal strength on my netgear router for my house.
View 4 Replies
View Related
Nov 21, 2010
I have purchased two WAP200 units to act as access point and repeater. AP and repeater functionality works fine.
The issue I am having is extremely poor signal from both units. Even when very close to the WAP200, I get poor signal quality. The range before loosing connection is only a few feet.
I'm using the antennas that came with the box and have tried multiple placements both in my house and in other locations. I have also tried changing several of the configurations without any effect on the signal strength. Older D-link and Linksys routers provide good reception to most of my house from the same location.
View 1 Replies
View Related
Jul 8, 2013
i am having low signal strength on my laptop . only 2 bars are shown on strength meter . wifi router is just 3 meters away . my roommate has hp elite book and his signal strength is always full.
View 1 Replies
View Related
Mar 7, 2012
I have two AIR-AP350 SERIES AP's. I am receiveing wifi from my friends house a mile away across a valley with clear line of sight. I think there is a problem with one of these units because when doing a link test one unit shows 14% signal strength on either antenna from the remote router and the second unit shows 6% on the left hand antenna and 1% on the right.
View 3 Replies
View Related
May 27, 2013
We just recently invested in 5 RV180Ws to serve as replacements for the aging routers in 5 of our shops. Additionally, we bought them because they seem to offer robust WiFi options for customers/guests, such as multiple SSIDs and restricting 'public' traffic to it's own VLAN.
Straight out of the box we updated them to the new firmware, 1.0.2.6, set up 2 SSIDs (one hidden for employee use, and one broadcast for customer use), and plugged them in.
Everything seemed to be going great until we walked to the other side of the shop and watched the signal drop off almost completely. These are fairly small premises and the router can't be more than 8 metres from where the customers are, and yet the signal is so weak that it's almost unusable.
For reference, we have the WiFi running in B/G/N mixed mode to maximise compatibility. with the channel and width set to their defaults (Auto and 20MHz, I believe).
Moving the routers is only semi-viable; these are meant to serve as replacements for existing IT equipment, and the cabling situation means they can only really go in the office space near the rear of the shops. Also, it simply shouldn't be necessary; WiFi should extend well past 8 metres without issue.
View 3 Replies
View Related
Apr 11, 2011
In our project we are building a smartphone application dat determines the locations of persons in a building, using Wifi access points.Using 3 accespoint we are calculating the overlap of 3 circles.Today we measured the signal strength and found out that it changes around alot.So we dont really know if our measurements are right.
We would like to know what the RSSI strengths are of the following access point per meter.Cisco Aironet 1140 2.4 ghz
View 1 Replies
View Related
Jan 2, 2012
I am using a desktop PC with a wireless USB stick attached in order to connect to the internet via a wireless router, however, although it states that I am connected with excellent signal strength, it continues to show a warning sign over the wireless connection signal bars ON THE DESKTOP TRAY ONLY. I can't surf the web on my desktop or on my IPAD through the wireless connection in which both devices detect. I have a Sitecom wireless router.
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Professional, Service Pack 1, 64 bit
Processor: Intel(R) Pentium(R) D CPU 2.66GHz, Intel64 Family 15 Model 4 Stepping 7
[Code].....
View 14 Replies
View Related
Oct 30, 2012
How can I determine my DIR 601 router signal strength ?
View 2 Replies
View Related
