Record USB Mic Over LAN To Server?
Mar 7, 2013
They want to make audio recordings of their meetings, and have them end up on the server. I'm trying to figure out how to do this with a minimum of setup and post-processing. I'm also an audio guy, so I understand a lot of the tech issues. I had was to use a USB mic connected to USB to LAN converter to connect it to a computer that was authenticated on the network, and have recording software write the audio file to the server. I'm using a Windows Server 2008 with Domain-based authentication. The network is running through a Cisco Catalyst 2960 switch.
View 1 Replies
ADVERTISEMENT
Apr 26, 2011
I have an 1811 configured with dhcp scope and generally it works correctly. I have a host on the vlan/subnet that the scope is assigned that can receive an IP and all the specifics from the dhcp server. [code]
The host on the vlan/subnet should use the router as the dns server to resolve static hosts that are configured on the router itself. Can an IOS DHCP/DNS server do this?
View 1 Replies
View Related
Feb 14, 2011
how to add DNS server for windows 7
View 1 Replies
View Related
Jun 8, 2011
Is there a way to check or record from where the Windows XP pro workstation is getting the wrong IP address and placing it into its DNS cache?
[code]...
View 3 Replies
View Related
Feb 8, 2012
Automatically some client ptr record vanishes from dns where as host (a) record exists, how can i verify from client side or how can i see logs files in client machine for the same.
View 1 Replies
View Related
Dec 7, 2011
I have a Wi-Fi system in my house but have recently purchased a new laptop. I do not have the original record of the security key
View 1 Replies
View Related
Dec 8, 2011
Is it possible to install the D Viewcam software on a PC that is offsite (different network) as the camera and record from there? Basically the camera is home and you record from work.Can I record directly to any NAS (same network as camera) without having a PC in the middle? Or do I need a specific NAS?What about one of those external hard drives that hook up directly to a router?
View 1 Replies
View Related
Nov 25, 2011
If you have problems setting up a computer as a domain controller,what would be the best approach? Four DNS Zones you can configure? What policy would you use to record unsucessful logons to a workstation?
View 4 Replies
View Related
Feb 16, 2011
Basically, my brother uses about a gig a day of our broadband and blames it all on me. I need a way to record my broadband usage (only on my computer, not the network) per day.
View 1 Replies
View Related
May 16, 2012
Any app i can install which will monitor my lan connection for dropouts? i have searched but can't find any that work. I just want a simple app that will note down each time the lan loses connection and keeps a log so i can be sure if its the computer or the network at fault.
View 1 Replies
View Related
Apr 27, 2013
I loaded the following MIB into PRTG 'CISCO-WAN-3G-MIB' hoping to record RSSI and ECIO values on my 3G 1941W cisco router. RSSI is now recording using 'c3g current gsm rssi' however ecio isn't recording using 'c3g current gsm ec io' or 'c3g notif ec io'.[URL]
View 1 Replies
View Related
Jul 25, 2011
Does ZoneAlarm's tvDebug log file record the websites I visited? And if so, how do I delete it?
View 3 Replies
View Related
Apr 16, 2011
When I view my DCS-932L camera in the Main Console of DViewCam, I can here the sounds in the room being viewed. But if I record the video and play it back, there is no audio on the playback. I have the microphone on the camera enableI now have sound recording, however, the audio is about 3 seconds behind the video. Is there a setting somewhere to keep them synchronized? I have checked all the video sync checkboxes I can find.
View 4 Replies
View Related
May 2, 2011
I am trying to setup RBP to the X.25 connections to be routed to a TCP portI need connect by PAD (dialing) when the device connects it asks for the password of the router and does not open the TCP port.
View 2 Replies
View Related
Aug 2, 2012
I'm puzzled that you don't seem to be able to do this (a basic feature). Seems like when motion is detected you can only send an email or do the DI/DO thing.
I can do this quite well via the direct web-based interface (1.03 and earlier at least) on the DCS-1130, but the 932L doesn't have video record on motion option (baffled as to why not there too, but that's another issue). So, I was thinking of using the DCS software to get motion-detected recording out of the 932L, but looks like I can't do that either?
View 1 Replies
View Related
Feb 20, 2012
DCS 5230L possible to record on buffalo router buit in NAS?No option to choose, only can see SD card but Not my NAS.
View 2 Replies
View Related
Oct 21, 2012
How to configure ASA not to drop packets with ip option 7 (record route)? According to the docs, ip inspect ip option will drop all ip option packets except 0,1,and 20 (EOOL, NOP, or RTRALT):
"If an IP header contains additional options other than EOOL, NOP, or RTRALT, regardless of whether the ASA is configured to allow these options, the ASA will drop the packet. "
Also, policy-map type inspect ip-options treats only these 3.
View 1 Replies
View Related
Jul 24, 2011
I'am using ASA 5510 and I try to understand how PAT is working.I want to add a Mail Server in the LAN and a webmail using port 3000 on the server. ( webmail must be reachable from the WAN)This is my Configuration :actually LAN users access internet using NAT with one global IP ( 194.x.x.69) which is the ASA WAN interface.
WAN ----- ISP Router ---------- FW ---------- LAN -------- Mail Server + Webmail
| (25) | (3000)
194.x.x.69 192.168.1.254 192.168.1.6
I need to forward port 3000 and port 25 from outside to inside.For example, from the WAN : [URL] must be redirect toward 192.168.1.6:3000 . What is the Correct Configuration ? And what about the Inside/Outside Traffic,Is there any configuration to add ?
View 2 Replies
View Related
Jan 10, 2013
i've been using a VPN to connect to my home network from elsewhere for a few months. It's set up as follows:
PPTP
Maximum Strength Encryption
EAP-MSCHAP-v2 Authentication
Now I find out that MSCHAPv2 authentication has been broken and is no longer considered secure (even by Microsoft), so I want to change the protocol I'm using to make it secure.
However, I've spent 3 hours now researching this and I cannot for the life of me figure out how to use a better protocol on my Windows Server 2012 home server. I've tried setting up PEAP authentication (still PPTP) a la Microsoft's recommendation document, but it requires a certificate. I've created a self-signed certificate but it seems I can't issue certificates (via this method) without being a member of a domain, so I'm stuck. I can't even get started with L2TP since I can't find the option for it.
My question is this: Is there a way to setup a secure VPN server using Windows Server 2012 without a domain? If so, how do I do this?
View 1 Replies
View Related
Dec 9, 2012
I purchased the EA6500 a few days ago, and when I'm connected to Cisco Connect Cloud I am unable to select Folder Access / FTP Server / Media Server. I click them and nothing happens.Also, the Cisco light on the router keeps blinking.
View 5 Replies
View Related
Aug 23, 2011
We have Cisco ASA 5505 with ASDM 5.2 We have one Proxy server in our Local Lab and pointed to Hosted service(Simple Signal)issue is, When our proxy server send register to hosted server, ASA change private IP and post with outside IP and src port as 1063 every time.
Here is debug log on real time monitoring.
Aug 24 2011 05:21:19 302015 203.xxx.xxx.226 192.168.1.51 Built outbound UDP connection 3774 for outside:203.xxx.xxx.226/5060 (203.xxx.xxx.226/5060) to inside:192.168.1.51/27014 (99.119.161.107/1142)
Aug 24 2011 05:21:19 607001 203.xxx.xxx.226 Pre- allocate SIP Via UDP secondary channel for inside:192.168.1.51/27014 to outside:203.xxx.xxx.226 from REGISTER message
Aug 24 2011 05:21:19 710005 203.xxx.xxx.226 99.xxx.xxx.107 UDP request discarded from 203.xxx.xxx.226/5060 to outside:99.xxx.xxx.107/1063
Here 99.xxx.xxx.107 is Our ASA Outside IP address 203.xxx.xxx.226 is Hosted server IP address. My ASA config is attached.
View 2 Replies
View Related
Sep 29, 2011
i am facing the same problem now but am using windows 2003 server
View 1 Replies
View Related
Jul 23, 2012
I put multiple rservers in multiple server farms?
So for example rserver1 and rserver2 are put in serverfarm production1 and are in use with particular sticky and load balancing settings.
Can I then create serverfarm test_production and put both rserver1 and rserver2 in it? Then play around with the sticky and load balancing settings as a test without affecting the production serverfarm.
View 1 Replies
View Related
Feb 16, 2012
I'm trying to design a CSS configuration that allows servers in the same vlan to be the source and destination of load-balanced traffic. My thought is to add two new vlans, one for the VIPs and one for the servers, then NAT the source IPs going from the LB to the servers.
Is this the right way to do it?I've never NATted using CSSs, so I wanted to verify what I'm thinking.Our current config trunks the vlans -
interface 1/1
trunk
vlan 1
default-vlan
vlan 555
[code]....
View 3 Replies
View Related
May 6, 2012
[code]...
I am able to obtain IP addresses through the DHCP server for my clients and I am able to browse internet on the server 2k8.Server 2008 - Share Internet through DHCP server
View 10 Replies
View Related
Feb 11, 2011
I have install the administration toolpack on Windows 7 and enabled remote connections on my server 2008 box, When i try and connect with my Windows 7 server manager it does not work.I see stuff on google about enabling a trustedhost with winrm but can't find a way to do this.
View 18 Replies
View Related
Mar 10, 2011
Is there an iTunes Server for WHS 2011 available?
View 3 Replies
View Related
Aug 28, 2012
After getting New Workstations, I wanted to connect that to the SERVER but Windows 7 could not log into domain of our server with Windows Server 2003. Besides following the proper process/steps. I am able to use the printer and internet shared through SERVER though.
View 2 Replies
View Related
Dec 14, 2010
I've been reading that the Windows Server Backup that is included with Server 08 R2 is pretty good. Is spending $400 on a third party utility worth it?
I'm asking because we're purchasing a new server soon and I want to know if the included backup is going to be good enough. Will be backing up server state as well as data to tape and possibly an off site server (server 2003) if I get my way.
View 19 Replies
View Related
Jan 25, 2013
I know the best thing one should do is install an ISA server and an Active Directory Domain Controller on separate servers. But for some reason, I want to configure my Windows Server 2003 as an ISA server as well as an Active Directory Domain Controller. What can happen to my server making it run improperly. For example, my ISA server will function mainly as a Firewall, I wonder if all the rules I create in ISA server determine what I mean it should work or I have to consider any affection from Active Directory DC to those rules?I have to ask this question because I've already installed both ISA and AD DC on my Windows Server 2003, already created an Allow. All rule (just for testing connection) in ISA server but I can't ping from all the clients to my server, all the clients can ping each other and the server itself can ping to all clients. I just think that may be the affection from AD DC to my AllowAll rule in ISA server.
I successfully created some rules that worked greatly as they should work but when I hadn't installed AD DC yet (just installed ISA), however right after installing AD DC, it still worked well (this made me think that AD DC didn't affect to how ISA works). Then I configured a little related to DNS server, and maybe something I don't remember exactly and now I can't ping from my client PC to my server. My network is virtualized using VMware 8 workstation and GNS3, at first there is no need of GNS3 because I just want to test my internal network (some clients connected to the internal interface of ISA server). Depending on VMware that I can't be sure if it is some fault of VMware or any other thing but my configuration on the servers.
View 5 Replies
View Related
Jan 26, 2013
I created an Array but this array contains no server by default, could you show me a step-by-step guide to add a new server to this array, I've searched for hours but couldn't find anything talking about this, here is a snapshot of my ISA server 2006 management console, If there is no server included in that array, my ISA server can't work, can it?
View 1 Replies
View Related
Jul 5, 2012
I planned for my customer to replace his old LMS 4.0.1 server under Windows 2003 by a new server under Windows 2008 R2.Customer wants also to set a new LMS name and IP address for the new server under Windows 2008 R2 and keep both servers on the network.I'm wondering what could be the best procedure to do that migration.Can I used backup / restore procedure in that case ?If yes, what file must I modify to adapt the new LMS configuration to new hostname and IP Address ?
View 2 Replies
View Related
Mar 5, 2011
What happens is I can go on the internet normally i.e. watch videos, look up sites but when I go to play a game like Counter Strike I lose connection. I aslo occasionally lose connection when I'm just surfing the web but it happens most of the time when I play a game.According to the troubleshoot it says it can't find the DNS Server or the Server IP. I am running my computer off of a Linksys wireless usb because the room I am in dosen't have any phone lines.
View 18 Replies
View Related
