Region : Australia
Model : TL-WDR4900
Hardware Version : Not Clear
If wdr 7500 will have english firmware ? I bought the router in china and now back home in Australia its all in chinese?
Region : India
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : TL-WDR4320 router
ISP :
Just buy TL-WDR4320 router but its in Chinese language can somebody provide my English Firmware so that i can use this product.
Region : Netherlands
Model : TL-WDR4900
Hardware Version : V1
Firmware Version : 121211
ISP :
after changing from a Thomson router with wifi to the TP-link WDR-4900 I find that the wifi is very unstable. The 2.4GHz is operating on the same channel as my previous router (channel 8 - which is the lest busy channel around my house), and none of my neighbours have wifi on the 5GHz band. Almost all devices in my home regularly have to reconnect to the wifi, both on the 2.4GHz as on the 5GHz (tested with more than 8 devices). Almost every 15 minutes I see a "wifi channel disconnected" message, 10 seconds later followed by a "wifi connected" message. the Wifianalyser app on my tablet confirms that the wifi signal drops once in a while to zero. I use the latest stable frmware (I read that there is beta firmware but I don't like to loose warranty). The stability seems to unrelated to the amount of traffic on the wifi network.
Will this be fixed in the next firmware of the TP-WDR-4900 ?
Region : Argentina
Model : TL-WDR4900
Hardware Version : V1
I am about to buy one of these two models tl-wdr7500 and tl-wdr4900 that look exactely the same and I am trying to figure out what is the difference between them?
Region : Hongkong
Model : TL-WDR4900
Hardware Version : V1
Firmware Version : 3.14.3 Build 130320 Rel.39025n
ISP : PCCW Netvigator
I have upgraded to the latest firmware which solved lots of problems regarding unstable wifi connection as well as BitTorrent / P2P transfers.But I also observed that when my BT is on (Transmission for Mac) at around 50KB/s upload and download, my network latency hikes up from some 30ms to 500ms which affects a lot on web browsing or other apps requiring Internet.My BitTorrent app is showing I am merely making some 20 peers connection so I am not convinced that is an ISP problem but it's more about the router.
Region : France
Model : TL-WDR4900
Hardware Version : V1
Firmware Version : 3.14.3
ISP : Free
I would like to translate the router firmware in french, any software to use to edit the file TPlink .bin.I tried with various prog and hex editor but the result is not good.is there a software to display flow curves by IP address or mac compatible wdr4900 or is it possible to integrate it in a future firmware?
Region : Canada
Model : TL-WDR3600
Hardware Version : V1
Firmware Version : 3.13.23 Build 120820 Rel.73549n
ISP :
I'm wondering if I can install this version of the firmware: TL-WDR3600_V1_130320
It says: Notes: For TL-WDR3600(UN) V1 What is that (UN) version exactly ?
Region : Malaysia
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : TL-WDR4300_V1_130319
ISP : unfi
I unable connect to internet after upgrade the new firmware
Region : Bulgaria
Model : TL-WR2543ND
Hardware Version : V1
Firmware Version :
ISP :
Region : Others
Model : TL-WR2543ND
Hardware Version : V1
Firmware Version : 3.13.6 Build 110923 Rel.53137n
ISP :
I bought the TL-R2543ND. The hardware version is V1.2. I want to ask, is there firmware upgrading for this version . Here I see only version V1. [URL] Are they suitable for my router?
Region : Bulgaria
Model : TL-WR2543ND
Hardware Version : V1
Firmware Version :
ISP :
Region : Others
Model : TL-WR2543ND
Hardware Version : V1
Firmware Version : 3.13.6 Build 110923 Rel.53137n
ISP :
I bought the TL-R2543ND. The hardware version is V1.2. I want to ask, is there firmware upgrading for this version . Here I see only version V1.URL
Region : UnitedStates
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 1
ISP : cox.net
I have downloaded the file TL-wdr3600_v1_130129.zip. Extracted the file to a temp folder. Thje file is a bin file which is a bin image wdr3600v1_en_3_13_26_up(1301).bin. I do not see any flash file to load this to the router.
Region : UnitedStates
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23 Build 121225 Rel.37950n
ISP : Comcast
just upgrade to the latest firmware and was checking to see if I had IPv6 going with the router but it seems like it's not enabled?I went into my local area network properties and it shows checked and obtain automatically.went into the router ipv6 support tab and it shows:
IPv6 Status
WAN
Connection Type:
DHCPv6
IPv6 Address:
[code].....
Region : Malaysia
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP : Unifi
I just bought this hardware, I haven't tried it yet. Will tested it when I reach home today. Someone told me that I need to update the firmware. Do I really need this, or I can just simply use the existing firmware?
Region : UnitedStates
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : wdr4300v1_en_3_13_23
ISP : comcast cable
This router worked fine until I updated the firmware downloaded from the TP-Link site. I have V1 hardware which is what the firmware was created for. Since the update the wifi continually kicks outs quite often rendering this router useless.
Region : UnitedStates
Model : TL-WDR3600
Hardware Version : V1
Firmware Version : TL-WDR3600_V1_130320
ISP :
Has anyone gotten the Guest Network feature to work from the new firmware TL-WDR3600_V1_130320?I have my WDR3600 setup as an access point:TPLINK with static IP address connected via ethernet cord from the LAN port and connected to the main Verizon FIOS router which distributes DHCP IP addresses to the netwrok. Can not get the Guest Network feature to work - I see the guest SSID I created but when I connect to it, the IP address assigned is in the 169. range meaning it does not get to my main router.It may be because I have the TPLINK setup as an access point, so are there any people who have gotten Guest Network work either with the TPLINK as the main router or as an access point?
Region : UnitedKingdom
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP :
After setting up the newly arrived router, renaming the SSID and changing password for 2.4 GHZ AND 5 GHZ and also renaming the default router username and password, I decided to update the firmware.The procedure wiped all configuration I've made forcing me to do all over again.
Region : UnitedStates
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : OpenWRT
ISP : Comcast
I was having major stability issues with my TPLink WDR4300 and after a little bit of research, decided to upgrade the firmware to OpenWRT. I found a post online and followed these instructions:
1- Make sure your router is version 1.x (x can be any number).
2- Download the openwrt firmware from here: [URL]
3- Download putty command tool from here: [URL]
4- Login to your router config page (192.168.0.1) using internet explorer browser and update the firmware to openwrt. Use the firmware file you downloaded in step 2.
5- Now open Putty software you downloaded in step 3. Enter host name: 192.168.1.1, Connection Type choose: Telnet. Now click open. Now you will see the command line with black screen,
6- Now type "passwd" into the command line and press enter on the keyboard. Now choose your new password to access the router make sure password has letter and number. Repeat type password and press enter. Password should be changed now.
7- Type into the command "opkg update" and press enter on keyboard, Wait for it to do some download and updates. Once finished, type this "opkg install luci" and press enter
8- Type this into the command to enable luci "/etc/init.d/uhttpd enable" and press enter on keyboard.
9- Type this into the command "/etc/init.d/uhttpd start" and press enter on the keyboard. Now you can close Putty.
10- Open internet explorer in the address bar punch in: 192.168.1.1 and use the password you created to login to the router config page. Go to the wifi section and turn on the wifi and set up wireless security network.
Everything worked fine until I got to the last step and go to the "wifi section and turn on wifi." After a bit more digging, I noticed that there is not a "Wifi" option under the 19192.168.1.1 portal "Network" tab. After getting frustrated and more hours trying to figure it out, I elected to try and go back to stock firmware. On Luci, I selected restore to factory settings and the router did its thing and restarted. Now I can't login to Luci (obviously) since it was no longer enabled in Putty. I try and run Putty to connect to 192.168.1.1 and it just opens and immediately closes. It will not connect. I also can no longer login to (192.168.0.1). Further, when I try and run the TPLink setup disk,I receive the error "Please check the network connectivity" and "Please check the model of your router." The Wifi light on the router does not turn on (it is switched on). I'm stuck and don't know what to do! I use this router in a home office with multiple wifi users.
Region : Denmark
Model : TL-WDR4300
Hardware Versin : V1
Firmware Version : 3.13.23 Build 121225 Rel.37950n
ISP :
my TP-Link USB Controller after my latest firmware upgrade, and therefor my USB-printer (connected to the router) do not function any more, and i can not find a new software for the Controller
Region : Iraq
Model : TL-WDR4300
Hardware Version : V1
have TL-WDR4300 router hardware v1 but when update to the latest firmware it became unstable and disconnecting so I had to return back to older firmware the new firm ware released 12/25/2012 and it is noted for TL-WDR4300(UN) V1 my model is TL-WDR4300 V1 not (UN) so what is different between the two
Region : Canada
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23 Build 121225
ISP : Rogers
Ever since upgrading my firmware from 120426 to the latest(121225), one of my computer(windows xp, TP-link Nano) is frequently losing internet connectivity.I purchased the router a month ago and firmware 120426 was the version that came installed. The router would stop working about 3-4 times a week, requiring me to reboot it. Because of this I did some research online and found out about version 121225 which supposedly should improve performance and stability. After the firmware upgrade today I noticed that one of my computer is having a lot of trouble maintaining internet connectivity for more than 30 minutes. When checking wireless connectivity it would say that I am connected and that the signal strength is excellent. I'm also able to ping 8.8.8.8 but not www.google.com(I've tried ipconfig /flushdns and it doesn't solve the problem). I also have trouble accessing or pinging the router(192.168.0.1) with this computer.
I know this is the wrong category fot my post, but I can't find any other category with a closer match.
Simple question: - where can I find an ENGLISH version of the DI-524M router's firmware??
Can I use a DI-524 firmware for the DI-524M?
Everything is organized by country on the website. I don't think this is appropriate to user's utilization of DLink's product. You can have people that speak a totally different language than the main one of their residency country. My 2cts.
Region : UnitedStates
Model : TL-WDR3600
Hardware Version : V1
Firmware Version :
ISP : Centurylink
I'm using a WDR3600 router, and I'm having difficulty with getting internet access on the 5 GHz band. Right now the router is broadcasting in both 2.4 and 5 GHz as two separate APs. The 2.4 GHz band works perfectly fine, but when I connect to the 5 GHz band my device is not assigned an IP address and cannot connect to the internet (or even the router configuration page). Unfortunately, I don't have another device capable of accessing the 5 GHz band, so I can't check to see if the computer is at fault, but both the computer and the router have worked together with no problems before, and this computer has done fine in accessing other 5 GHz bands.
I have belkin n600 hd wireless dual band n router f7d8301 v1. do i need to do any firmware upgrade? should i down load and install V3 of firmware of V1 only? i want to increase / enhance the range of WiFi.
View 1 Replies View RelatedI'm about to jump on the bandwagon and drop my whr-g125 running tomato for a new wireless-n router that runs tomatousb. I can't seem to find a dual-band one that is supported.
Need:
- Wireless-n dual-band (2.4ghz+5ghz). Doesn't have to be the super fast type.. whatever is entry for this.
- At least 1 usb port for printer sharing
- Prefer gigabit, but I can live without
- Must be able to run Tomato in some form, or if I have to, run dd-wrt as a last resort.
Region : Argentina
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP :
Region : UnitedStates
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23 Build 121225 Rel.37950n
ISP : Comcast
I just upgraded my DLink DIR655 to WDR4300. My VOIP service has worked for the last 5 years. But with WDR4300, I'm frequently experiencing dropped calls. The call will be cut off every 20 seconds or so. This is really a deal-killer.
Region : UnitedStates
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23
ISP : Comcast
I have no problems connecting on a 5 GHz band or wired to the router. However any device connecting on 2.4 Ghz gets barely any bandwidth and drops after running for a short time. I have test numerous devices and have the same issue. What was odd is a device on 5GHz that worked fine had the same issue when connecting on 2.4 GHz which seems to say it is only that band. I have an old router that works fine on 2.4 GHz on channel 1 with all the security settings I used on the 4300.
Region : Netherlands
Model : TL-WDR3600
Hardware Version : V1
Firmware Version : 130129
ISP :
I've this dualband wireless router since a week.Now I found out, NFS is working very slow (actually NFS is not working at all).I have a Mede8er and a synology NAS server connected to the TP-LINK WDR3600 router.I have movie directories shared on the NAS using NFS.when I go to the NFS locations in my mede8er it takes very long before I can see the NFS mapping.When I connect the Mede8er straight to the Synology NAS server (Cross Cable connection) NFS is working as it should be.So the TP-LINK WDR3600 cannot handle the NFS protocol?
Region : UnitedStates
Model : TL-WDR4900
Hardware Version : Not Clear
Firmware Version :
ISP : Comcast
The internet connection works really well on the 2.4GHz connection and when wired. But when Im connected through the 5GHz network, I get no internet.
Region : Iraq
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP : Newroz Telecom
Can I replace firmawre TP-Link WDR4300 to DD-WRT to use it?, either my TP-link already has VPN,NAT,QOS,..etc like as DD-WRT so does need to replace firmware for better?
Does TP-Link WDR4300 support with DD-wrt? Is it working clearly without any problem?
Region : UnitedStates
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : latest
ISP : Clear
Get GMT throws an error. I set known good public NTP servers, still get error. Also power cycling or rebooting the router seems to drop manual time settings, as well. I am using WDR4300 as a wireless access point, does that matter? Maybe I don't need time in access mode? It is connected to the Internet and is providing internet access to clients.
Region : Venezuela
Model : TL-WDR4300
Hardware Version : Not Clear
Firmware Version :
ISP :
I have an issue with my TL-WDR4300 (regular, internet sharing use, no Open WRT or similar things). It was working well, until one day that my devices only receive the 2.4 GHz signal (no 5 GHz) and then I try to connect to 2.4 GHz and it asks for a password. I put my regular password and it doesn't work. Then I tried to bring it to factory default settings, I push the reset button for 8 seconds as the manual points and then same thing. What could I do?
Model : TL-WR2543ND
Hardware Version : V1
Firmware Version :
ISP : I have an external HDD that I regularly use in any computer I have access.It's an HDD enclosure 2.5" 3.0 USB, with a 750GB WD HDD inside. I use it in computers with all versions of USB, even in my TV. It doens't require an external power source, and just have 01 input/output, which is a USB port.After plugging it in the router (running with the last available firmware from TP-LINK - 3.13.27 Build 121207), I entered the setup screen of the router, and under USB Settings, pressed RESCAN, but the HDD wasn't recognized.What happens is that when I plug it in the router, the LED in it starts blinking (in normal usage, the LED becomes red for a couple of seconds, and then becomes steadly blue, when it gets connected into a equipment). It is probably a matter of power, as if the router wasn't providing enough power to it when it's plugged.Afterwards, I've made the following tests:
1) Used this External HDD in 3 different equipments (a notebook, a netbook and a TV), with different versions of USB ports. It was recognized and read normally in all of them.
2) I tested a pendrive with the router. After RESCAN, it was shown normally in Storage Sharing page.
3) I have downgraded the firmware to 120509 version, plugged the HDD in the router, and once again, it was an unsuccessful try.
What I can conclude from those tests is that:
1) My External HDD is working normally;
2) The router's USB port is working properly;
3) So, if both are working, it can only be a matter of compatibility between them.
Region : UnitedKingdom
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP : plusnet
How do I get the full 450 Mbps out of my router on the status it saying 300Mbps