Canon Mf4350d - Accessing Vista Shared Printer From Mac
Dec 5, 2011
I am sharing a canon mf4350d printer installed on a vista home premium edition computer. I am trying to access it on an imac using osx 10.6.8. Below are the steps I have taken so far:
1. On vista machine in the control panel I have checked off the "share this printer" box in the printers properties.
2. In the registry of the Vista machine I have changed the value of lmcompatibilitylevel from 3 to 1 and then rebooted.
3. On the Imac in system preferences I opened "Print and Fax" and clicked "+" to add a printer.
4. I clicked on the "IP" button and set the "Protocol" to "Line Printer Daemon - LPD"; in the "Address" field I entered the IP address of the vista machine; In the "Print Using" I set to "Generic PCL Laser Printer".
When I try and print it can't connect to the printer and it does not print.
View 3 Replies
ADVERTISEMENT
Sep 16, 2012
Canon lbp 2900 attached on windows 7 32 bit system,i want to shared this printer on another system(windows 7 32 bit).
View 1 Replies
View Related
Mar 21, 2011
I have 2 desktops (running windows 7), a Canon MF8300 printer, and an outgoing ethernet line, all on a Netgear Advanced Cable Modem Gateway CGD24-CPR. I'm only concerned with having the 2 desktops set up with the Canon printer.Both computers have been connected to the printer before and I have the startup disk. But once the new offices were set up and both of the desktops were moved, I can no longer access or find the printer.
I can IPconfig the Desktops for their IPV4 addresses and both desktops recognize eachother on a Homegroup, but I can't find the printer. I printed off the print configuration page from the printer which gave me an IP address (printer is set for auto-obtain), but using an IP search won't bring up the printer.All of the devices are plugged into ethernet ports set up for the three different office they are in and the actual location of the Netgear cable modem/router is over 100 feet away. My primary concern is getting the printer for the desktops, but I also need to add a wireless router into one of those office in the future.
View 15 Replies
View Related
Nov 21, 2011
I have shared folder s on my Win 7 PC.I can access these folders by typing in the username and password on a Mac.I can't access these folders on my Vista PC because there's no prompt to sign in.How do I change the login account on Vista so that it can access my Windows 7 shared folders?
View 2 Replies
View Related
Feb 23, 2011
I just set up a VPN connection from my laptop (Win 7) to my office network using Netgear Prosafe VPN client software to my Netgear Prosafe VPN router. I can connect successfully to the router and can successfully ping any of the devices on my work network. Currently, there are shared drives on the work network that I'd like to access from the laptop. All file sharing options are set so that other local machines can access through the network (the drive I'm trying to access runs off of an XP machine). Any attempts at mapping or using \ipaddressfile come back with a "windows cannot access" message.
View 8 Replies
View Related
Jan 11, 2013
i have a question about accessing shared folders over the WAN-Port of an DIR-615. For your information: both sides of the network (LAN and WAN) are under my control.
On the WAN-side of the network we have a fileserver with shared files. We can ping the server and reach it and the Websites on this server are also reachable from the LAN-side. But if we try to access to the shared folders the request doesn't reach the server. If we change the router there are no more problems and anything works without problems. The Router has default-settings except the network-settings so it works in our network. Does this router block outgoing traffic on ports 135-139 and/or 445? And when yes is there any way to disable this? I can't find it.
View 4 Replies
View Related
Apr 15, 2013
I am using cannon printerme connect it wirelessly to my laptop.
View 5 Replies
View Related
Feb 2, 2013
Have a Canon MP495 (wirelessconnection) whiich worked until I changed internet provider, It was saying printer not respondingand now it's saying printer offline. It won't work with usb connection either. Tried reinstalling it but still nothing..
View 1 Replies
View Related
Jan 18, 2012
Printer drivers for canon 2900?
View 1 Replies
View Related
Mar 23, 2012
Any way beside the standard router/printer rebooting, firewall disablity. I am able to connect to my first laptop on which I installed all the drivers on but when I try to add an additional windows 7 laptop
View 2 Replies
View Related
Sep 26, 2012
Have a Canon MG6120 wireless multifunction printer. I rarely print anything from my laptop, but wanted to do that today. What I get is an error message that the printer is offline -- which it isn't; it's on. I tried going thru the setup on the printer, re-entering the SSID, and it said it was connected. Still same error that it's offline.
About a month ago, I did change the name of my router, but it never cause a problem with printing from my desktop, which I can still do. It's just the laptop that gets the "offline" error.What do I need to do to make the laptop recognize that the printer is on?
View 1 Replies
View Related
Apr 17, 2012
My Canon MP495 3-in-1 inkjet XPS printer is connected through my mother's computer, and up until a few days ago I was able to print from it through our Home network. My mother can still print from it directly, so it is not a hardware issue. On my computer when I go to print, underneath the printer selection it says server offline. I have checked both computers and they are both on the Home network with all sharing options on. I can see her media and documents from my computer and she can see mine vise-versa. When I open the Network and Sharing Center and view the full network map, my mother's computer runs to a question mark then to the router, while mine is shown to be fine. When you click on the router within the map it brings up a page saying "Important Update. To avoid a conflict with your Internet Service Provider, your router's IP address has been updated to 10.0.0.1. You must now update the IP addresses in your router's configuration settings for each relevant service,such as port forwarding and IP address reservation." I do not know if this is the problem and it is starting to go beyond my realm of understanding. Also, possibly related, we had a bad storm that did NOT knock our power out, but the internet went down and we had to reboot the modems. This occurred right before the problems began. Last piece of information: We are going through 2 routers due to lack of jacks in the house. The line goes through the first router which connects to a second one in the back of the house. Both computers are linked to the second router, and it is the second router which shows on the network map. I go to an online college and it is necessary for me to access the printer.
View 7 Replies
View Related
Jun 18, 2012
is there any way i can make my canon printer i9900 wireless?
View 1 Replies
View Related
Jan 18, 2012
Canon MG5300 Windows 7 64x Home Premium
It was working fine and suddenly quit working. When trying to print, get the printer not responding notice. When scanning, it shows disconnected.
View 1 Replies
View Related
Jan 15, 2013
do I need USB cable connected all the time to printer and laptopto print?
View 1 Replies
View Related
May 25, 2012
I am trying to connect a Canon printer wirelessly to my system and it will not connect. What can I do to connect it?
View 1 Replies
View Related
Mar 21, 2011
I have a printer canon 2230 i want to canact via network cabel throw switch ,then i want to sarching printer then show workgroup and next proces is not go.
View 1 Replies
View Related
Feb 28, 2012
I have a Canon wireless printer, but I forget the password for conection to my laptop.What should I do?
View 1 Replies
View Related
Sep 16, 2011
My Vista can not open/view XP files, though XP can open/view Vista's.My Vista can ping my XP. My XP can ping my Vista.My XP can open/view files on my Vista. But when using my Vista, and I click on the XP computer showing in my Nwtwork to open my XP wireless laptop (Averatec) files, I get the error message (many have seen before): [code] I turned off all firewalls and all anti-virus software.All computers have the identical Workgroup name. NetBIOS over Tcpip is enabled in the Vista.In "Services" I made sure these items were "Started": [code] I even tried changing the Registry key:HKEY_LOCAL-MACHINESYSTEM CurrentControlSetControlLsa "restrictanonymous REG_DWORD to 00000000, but regedit wouldn't allow the change.
View 19 Replies
View Related
Oct 20, 2012
I currently have Canon MX870 pixma printer - it is wifi enabled. A few weeks ago it went offline and I was able to reconnect it by entering the "access point" and password in printer control panel. It has once again gone offline however the printer cannot locate the access point by searching and when entered manually returns a message that it cannot locate the access point as entered. I am having the same problem with my TV which is also wireless connected, i.e., the TV is not connected to the internet and I cannot locate the network name (access point) in the setup menu on the TV. I had also previously reconnected the TV by entering the network name manually.
I tried looking in the router - Linksys Wireless-G 2.4 but cannot figure out where this information should be located. There is a setup tab in the router administration and both the Host name and the Domain name are blank. The router admin page states that: Host Name : Enter the host name provided by your ISP. Domain Name : Enter the domain name provided by your ISP. The wireless tab states: Status: SES Inactive. Does this mean anything?
Computer is a Dell Inspiron 620 running Windows 7 Home Premium
View 4 Replies
View Related
Oct 9, 2011
I have a canon ipf6350 printer that I want to move to another room in my house. It is currently connected via a network cable connected directly to my wifi router. The printer does not have wifi. how can I connect the printer to the network once it is in another room? I have an older belkin n1 vision wifi router I am not using. Can I connect this wirelessly to the existing network and then plug a cat 5 cable from the belkin to the printer?
View 5 Replies
View Related
Dec 21, 2011
I move to new house recently and found out that my new house doesn't have wireless or WiFi connection. I have Canon MP560 printer that need WIFi connection and I couldn't find out how to connect it to my computer. How to connect it to computer without using wireless connection?
View 1 Replies
View Related
May 10, 2011
There's a Canon LBP 3500 printer on my office network.I don't know its IP.It doesn't show up when I scan the local subnet with nmap.I cannot find the manual (hardcopy or online).It is plugged into the network.It is turned on.I have turned it off and on again.I have tried plugging it into other ports on our switch.
View 1 Replies
View Related
Jan 7, 2013
Region : NewZealand
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.12 Build 120405 Rel.33996n
I've plugged in a USB flash drive and enabled shared storage on my TL-WR1043ND router. With "Access shared storage with password" unticked, I can access the share using both my Windows 7 Laptop and Motorola Defy+ (with ES File explorer) and successfully play any Music off of the network share using the Android App, ES File explorer.
If I enable "Access shared storage with password" and attempt to log in using any of the user accounts I've set up on the device, I will be able to access the shares using the credentials on my Windows 7 Machine, but not with my Motorola Defy+, instead I will simply receive "Login failure". I'm Picking it has something to do with the network share type?
View 4 Replies
View Related
Dec 3, 2012
Suddenly Can't access shared folders but others can . Laptop with Vista. Had many Mapped [COLOR=blue !important][COLOR=blue ! important]Network [COLOR=blue ! important]Drive[/COLOR][/COLOR][/COLOR] issues about 2 months ago. Finally all resolved. Laptop was gone from our shop for about 2 weeks. Now it cannot see the Shared Folders (except for Public and Printers), and could not re-connect the Mapped Drives. Accesses Internet, can Ping the other PCs(all running Win7). Connect thru Wireless.
Why SUDDENLY, there are no shared folders visible on a Laptop?
Notes: This is the 2nd time this has happened. I changed alot of settings the first time. I re-checked all the settings this time.
Update: Magically works today 12-3-12. But what caused it? Why does Vista loose the ability to map network drives, when nothing
changes...I still want to know why for the next time this happens.
View 5 Replies
View Related
Nov 26, 2012
I can't seem to get my Canon MG5220 Wireless Printer to connect to my Belkin N150 wireless router. The printer sees the belkin wireless router network name but cannot connect to it( after entering the correct security key). It worked fine with a previous wireless router. My desktop PC is connected to the belkin router via direct ethernet, and I want to be able to access my wireless printer which is located in another room from my PC. I think I remember reading that the canon mg5220 may not support WPA2 security, but Its only a year old and would prefer not to regonfigure my router's security setting. how I can get this printer to connect to my router? Any other ways to access this printer from my PC which is connected to LAN via ethernet?
View 3 Replies
View Related
Mar 1, 2013
I am trying to setup the wireless printer (Canon MX436) to my ACER laptop (windows 7).
I am not very techincal and the instructions say to "Press and hold the WPS button on the access point (for about 5 seconds)." but have no idea what this means.
I know the laptop has the wi-fi turned on but when the printer searches it doesn't find it.
View 1 Replies
View Related
Feb 20, 2012
I just bought a canon pixmaMG6120 wireless printer...hooked it up to our wireless network (via a netgear wg624v3 wireless router). pritner recognizes the network, can sign into the network and has an IP in they systems setting. i can print to it via my iphone and ipad (all on the same wireless network).my HP dv6 laptop doesnt recognize a printer is on the network though. i've tried using the included cd, tried doing it via IP address, tried taking down all the firewalls, and nothing seems to work.
View 4 Replies
View Related
Jan 21, 2013
I have a Canon i9900 printer wired to an XP desktop. I bought a new windows 7 laptop that connects to the internet through my wireless router. How do I setup the laptop to print through the router?
View 2 Replies
View Related
Jan 7, 2011
I have using Canon iR2318L Printer & we are Work on VLAN but my printer is not working properly in Vlan is this VLAN Problem or Printer Problem ?
View 4 Replies
View Related
Feb 23, 2013
I have an acer laptop and although I have wirelessly connected to my canon mp560 printer, it loses the connection and I cannot reestablish it so my lap top tells me the printer is offline. Is there something else I need to do or load on for this to work every time?
View 1 Replies
View Related
Nov 27, 2012
I can't seem to get my Canon MG5220 Wireless Printer to connect to my Belkin N150 wireless router. The printer sees the belkin wireless router network name but cannot connect to it( after entering the correct security key). It worked fine with a previous wireless router. My desktop PC is connected to the belkin router via direct ethernet, and I want to be able to access my wireless printer which is located in another room from my PC. I think I remember reading that the canon mg5220 may not support WPA2 security, but Its only a year old and would prefer not to regonfigure my router's security setting. how I can get this printer to connect to my router? Any other ways to access this printer from my PC which is connected to LAN via ethernet?
View 1 Replies
View Related
Jan 21, 2013
Recently i converted a customer's APs to LWAP and installed a 2504 WLC. Everything came up and is acting good, but the printer is no longer printing. It can neither be discovered using windows networking, nor bonjour. It worked until LWAPP conversion.
It is an AirPrint device, a Canon mx892. Trying to print using an IP port fails, AirPrint fails, and sharing it through the attached Mac also fails. I dont know enough about printers or AirPrint to effectively troubleshoot. The customer opened a case with Canon, who says its a network issue. I cannot get it configured on the wire, apparently setting up a printer isnt as easy as it used to be.
View 1 Replies
View Related
