my name is Nathan and I have ran into an issue with my LAN. I recently did a factory restore by pressing F11 at start up due to corrupted Windows files. Now that I have restored my computer, I get a "limited connectivity" to an "unidentified network" I tried all the Windows repair options, I powercycled my modem and my router and I unplugged and replugged my LAN cable.
View 9 RepliesMy wireless adapter isn't recognized on my computer now :( it was working perfectly before. My computer keeps saying there is no driver for my adapter?
View 1 Replies View RelatedI wonder how i can restore my router to its defalt settings if my reset button is broken and the router has lock the mac of my pc. Can i connect the router to my pc and access it from it?
View 7 Replies View RelatedI'm having trouble with an 800 series router. Work has borrowed it to me so i can practice for my icnd2 exam. Only problem is it has a username and password on it. I have been told i can wipe the device and start over. but i cant get in to the user mode or any mode's as i don't have the user name and password. Is there a way of resetting the router back to factory defaults with out logging in to it?
View 2 Replies View RelatedI found a Cisco 1711 router in our storage room and I want to factory restore it so we can mess around with it or use it as a backup.
I connected a console cable to it and in Hyperterminal on a Windows XP box I want to try the CTRL+BREAK sequence to clear it out. I'm not concerned with the current config or finding the password, I just want to wipe it like it's never been used before.
This is what I get:
System Bootstrap, Version 12.2(7r)XM4, RELEASE SOFTWARE (fc1)
TAC Support: [URL]
Copyright (c) 2003 by cisco Systems, Inc.
C1700 platform with 131072 Kbytes of main memory
[Code]....
I have installed DD-WRT firmware onto my new D-Link DIR-615. It causes some problems and I'd like to re-flash router with orginal firmware. After turning router on with Emergency Room mode and choosing right (as for me) image file I'm getting "Unable to upload the image, please make sure the uploaded file is the correct image." Information.
Firmware downloaded from: [URL]
How can I fix my router? Which firmware file will be correct if not an original?
The ap 3502i has been registered to the wireless controller, but now want to restore the factory settings, repeated after the upgrade or will appear before the registration information of the wireless controller,
View 3 Replies View Relatedwhile configuring my ASA 5505 I changed the IP address range of the internal network. Obviously I made an error because I cannot reach the box neither at the old nor the new address. How can I restore the interface and firewall definitions or reset the box to its initial state ? I found a doc how to reset the password, but not explaining how to restore the complete initial config.
View 10 Replies View RelatedI currently have 2 cisco aironet 1121G access points. Both of which I believe had an image fail during an upgrade from autonomous mode to lightweight mode. I have tried to reset these access points as directed from Cisco's instructions. I have done a reset (amber light on the middle) and a factory restore (red light in the middle) They go through the steps to restore to factory default, however, after what I believe is an attempt to pull a dhcp address before defaulting into 10.0.0.1 ip address, the access point restarts. This is happening to both of them. After they reset and go through the series of memory tests, I am able to get all three solid green lights, they stay lit for just 15 seconds (rather than 5 minutes so that i can load a new image) I am not sure why they are behaving this way. I have tried as many different possibilities resetting with the mode button. There is no console port on this model of access points so i am unable to manage it otherwise.
View 1 Replies View RelatedI messed up the IOS on the flash of CISCO881-SEC-K9. On reboot it booted to ROMMON which allowed me to tftp up a working IOS c880data-universalk9-mz.151-4.M3.bin. Unfortunately somewhere in my playing around the default startup configuration factory loaded on the routerhas been erased. I can load a new a config on the device but as I'm using the router to learn its useful to have the original config load when I factory reset the device. What is the factory start up config?
View 3 Replies View RelatedI have been having some gripes with the above problem for the past few days, connecting several PCs in my office into a network. To cut a long story short, it's a bunch of XP SP2 and SP3 machines with only some of them having these issues. The network consists of two switches and one router with integrated modem and wireless. Internet access is established over that router/ ADSL modem.I have drawn out all the cabling and made all the connections myself, I don't doubt network related hardware one bit. Basically, I had the problem on two PCs, I tested connectivity on that cable with a laptop which didn't have any problems connecting to the network. All the cables are brand new, "straight" connectedC
View 14 Replies View Relatedi did this and the sign of unable to connect went away, restarted back to it, did it again and it goes away but still no connection. TCP/IP stack repair options for use with Windows XP with SP2.
View 8 Replies View Relatedmy internet is not working on my PC (XP) however the wifi in my house is still on (i can use laptop with functioning internet). The internet status say's "limited or no connectivity" and shows a yellow triangle with an exclamation point in the middle.
View 19 Replies View RelatedI manage a small office network IP's are generated via a rooter. I need to add a new pc to the network and here is where the problem starts.I have a cable from a HUB in that office which has a splitter 1 way goes to a PC the other is empty. At first i tried connecting the other PC from that splitter but i get the Limited or no Connectivity message on both PCs. If i connect only one of them to the splitter the connection works fine.Now i tried with a HUB, made a Crossover cable from the splitter to the HUB in the WAN port, same deal both PCs get Limited ot no Connectivity. THe strange thing is that if i connect only one via the HUB the same thing happens.I am really out of ideas, my only option left is to connect the PC from the main HUB which means allot of cable posing.
View 3 Replies View RelatedWhen using an Ethernet cord, I have no problems connecting to the internet. Also, my iPhone and my Wii have no problems connecting (wirelessly). However, I can't get any laptops to connect to my wireless. I have tried three different laptops and get the same problem, that it can connect to the network but limited or no connectivity.
View 1 Replies View RelatedI have a spare computer I build. Its a FX-60 on some old asus 939 motherboard. I installed xp in it because I don't have any wireless network adapters that work with linux or Windows 7.I am using an old Linksys WUSB11 Ver 2.6. USB adapter.The computer does have connectivity if I plug in an ethernet cord from the router. Worked fine, fast, was able to install Sp3, etc.I can't get the wireless to work. I get excellent connection strength, but can't actually do anything with it.Since this is XP and I haven't messed around with XP network settings for years, I think I got a bit rusty and spoiled with Windows 7.
View 6 Replies View RelatedLimited OR No Connectivity.
View 1 Replies View Relatedused to use Ethernet connection on this pc for 2/3 years, i recently ran wireless for like 2months. every time i try and use Ethernet i get limited or no connectivity warning, I looked in my ipconfig, i notice theres no physical address or default gateway for my realtek rtl8139/810x family fast Ethernet.
View 4 Replies View RelatedI got the urge to play a Windows game, so I used my restore disks to install XP on my Acer Aspire One A150. Unfortunately, my wireless card does not work anymore (?). I am dual-booting with Ubuntu 10.10 at the moment and my wireless card works there with no problem.I get a Limited or No Connectivity error every time.I'm connected to a router, which I have reset and works okay in Linux. I am connected currently using a USB D-Link N-Adapter, however, despite being "N" is considerably slower and inconvenient.
[code]...
I just installed a new NIC after troubleshooting old NIC and I am still receiving limited or no connectivity error. I checked router, cable modem & cable; all work fine.
View 13 Replies View RelatedI got this message and I went up to the " Start-Run_CMD-IPCONFIG and this is what I got Ethernet adapter Local Area Connection Media State....... Media Disconnected,Ethernet adapter Wireless Network Connection
View 1 Replies View RelatedI've searched the forums and found similar problems that relate to mine but after trying done of their solutions with no success I decided to make a new thread. This problem started 2 days ago with the same network I've been using for about 2 months.I'm running vista sp 1. I use google chrome and when I try to open a page it says unable to connect to proxy server. I changed the lan setting s (unchecked the box for using a proxy server for my lan) and now the page says the dns lookup failed.
View 1 Replies View RelatedI have a laptop running XP that will connect to the router wirelessly but not the internet. We have a static/fixed IP that I think may be the problem. Im not sure what the IP address is. Do I need to manually enter this (and DNS settings) into wireless connections > properties > TCP/IP, Microsoft Windows XP [Version 5.1.2600] (C) Copyright 1985-2001 Microsoft Corp.
View 9 Replies View RelatedI usually bring my laptop to classes to do homework during my free period and it connects through ethernet no problem. Today, randomly it says theres limited connectoin (no internet connection), but there's numerous other people here with laptops who are connected through the ethernet or wireless network, and their having no problems. I've already tried shutting my computer down and that didn't work, and since this is a school, the internet connection has to be steady, etc. What can I do to fix this?Some details about the laptop[CODE]
View 7 Replies View RelatedMy desktop PC ran Vista Home Premium and about over a year ago, suddenly developed the dreaded, 'Limited Availability' connection error when I tried to connect via ethernet cable to my D-Link dir 615 router.I have tried all possibilities (detailed in the other forums I have posted this issue in), like all the ipconfig commands in the CMD prompt, rebooted modem and router and pc but still getting this issue. [codde] As you can see - the Belkin wifi dongle connects fine, with an IP address of 192.168.0.101, however, the SiS191 ethernet controller (which has current and up to date drivers) refuses to connect and gives an IP of 169.254.241.0.I have also tried copying the settings from the wifi dongle and manually entering them for the ethernet connection but this also does not work..I don't think its an issue with my router as I also have a laptop, connected via ethernet, which works fine. Also have 2 iPhones, 1 iPod, 1 iPad, Xbox and Wii which ALL connect to the same router (via wifi) without any issues.
View 5 Replies View RelatedWe had a lightning strike near the house and it fried my NIC card (or so I thought), also my power strip. I replace them both along with my Ethernet cables. My internet intermittently goes out, every couple of minutes. I keep getting pop ups saying "Local Are Connection has limited to no connectivity" and/or "a network cable is unplugged".
View 5 Replies View RelatedWe have netgear router and 3 laptops which were all working on the internet fine but one laptop has had a full recovery done on it and now won't connect it just says there is limited connectivity, what it could be as the net is still working through Ethernet and the other laptops through wireless. Its windows vista.
View 5 Replies View RelatedOkay so I have a dual boot computer(windows xp3 and Linux Ubuntu). The Ubuntu wireless works so that means my hardware actually works, but my windows xp doesn't connect. First I have the xp3 so my recovery disk from Toshiba some of the stuff is outdated. I installed intel chip-set, intel proset(my wireless) , wireless LAN, oh the stuff that have to do with wireless and still doesn't work. This is what happens, proset finds the router tries to connect and it says limited. I tried repairing it but nothing works. P.S. the stuff that are outdated are like the QFE ( those are a lot of files in my Toshiba recovery and every time i try to install them they don't work they say that the system I am using is better than the stuff i am trying to install)(QFE is also just the name in front of the file and there is at least 25+ , don't know why it is QFE)
View 3 Replies View RelatedI recently moved into a new apartment and when I connect to the router using the wireless. I get limited connectivity, it accepts the security key but can not get the internet. Connect wirelessly to another router within range and can connect to the internet via that. Also if I connect a ethernet cable to the router it gives me internet access. I couldn't see any settings in the routers menu that would prevent me from connecting(but im probably being blind).
Two other guys I'm sharing the apartment with can connect to the internet wirelessly with no issues. The router is a Thomson TWG870UIR.
Windows Vista Ultimate OS.
Connection-specific DNS Suffix:
Description: Intel(R) Wireless WiFi Link 4965AGN
Physical Address: 00-13-E8-0D-82-4D[code].....
I am trying to share my internet conncetion with another computer. I am using a d-link switch. but I keep getting a limited or no connectivity message.
View 10 Replies View RelatedI have a couple of laptops on my home network and yesterday one of them stopped connecting to the internet. I was having some trouble with my sound cards and when I tried to automatically update the drivers my network connection cut out and now I cant get it to work correctly. All of the other laptops work fine.So initially I thought it was malware so I ran hijack this but i didnt see anything suspicious. I can see in ipconfig /all that the ip address subnet and default gateway are correct and I have the same DNS servers as the laptops that work fine. I can ping my router and the DNS server but not any of the laptops on my network or any external IP address.
View 4 Replies View Relatedrecently my internet connection shows the status i mentioned.in cmd ,typed Ipconfig/all and all ip are 0.0.0.0, I Tried to renew the ip by ipconfig /renew it tells THE RPC SERVER IS UNAVAILABLE.and also tried to start DHCP CLIENT in services.msc and got ERROR 1068 : the depency service or group failed to start.
View 14 Replies View Relatedi have a windows 7 laptop that ive just recently purchased. The wireless Connectivity was working fine last week, now suddenly it just wont work. I believe that its due to a program i recently installed that goes by the name of Connectify. I have uninstalled it yet still whenever i try connecting to any router wirelessly, the PC displays limited or no connectivity. On the other hand When i connect my laptop to a router via an Ethernet cable everything is fine. In case you are wondering, im currently using a 3g usb wireless stick to surf the internet, but i dont want to use it as i already have a router to use.
View 14 Replies View Related