Wireless :: Factory Restore On Computer?
Sep 21, 2011My wireless adapter isn't recognized on my computer now :( it was working perfectly before. My computer keeps saying there is no driver for my adapter?
View 1 Replies
ADVERTISEMENT
Cisco Wireless :: 3502i - How To Restore The Factory Settings
Jul 18, 2012The ap 3502i has been registered to the wireless controller, but now want to restore the factory settings, repeated after the upgrade or will appear before the registration information of the wireless controller,
View 3 Replies View RelatedCisco Wireless :: 1121G Steps To Restore To Factory Default
Oct 11, 2012I currently have 2 cisco aironet 1121G access points. Both of which I believe had an image fail during an upgrade from autonomous mode to lightweight mode. I have tried to reset these access points as directed from Cisco's instructions. I have done a reset (amber light on the middle) and a factory restore (red light in the middle) They go through the steps to restore to factory default, however, after what I believe is an attempt to pull a dhcp address before defaulting into 10.0.0.1 ip address, the access point restarts. This is happening to both of them. After they reset and go through the series of memory tests, I am able to get all three solid green lights, they stay lit for just 15 seconds (rather than 5 minutes so that i can load a new image) I am not sure why they are behaving this way. I have tried as many different possibilities resetting with the mode button. There is no console port on this model of access points so i am unable to manage it otherwise.
View 1 Replies View RelatedLimited Connectivity After Factory Restore?
Jun 12, 2011my name is Nathan and I have ran into an issue with my LAN. I recently did a factory restore by pressing F11 at start up due to corrupted Windows files. Now that I have restored my computer, I get a "limited connectivity" to an "unidentified network" I tried all the Windows repair options, I powercycled my modem and my router and I unplugged and replugged my LAN cable.
View 9 Replies View RelatedD-Link DIR-655 :: Restore To Default Factory?
Nov 19, 2012I wonder how i can restore my router to its defalt settings if my reset button is broken and the router has lock the mac of my pc. Can i connect the router to my pc and access it from it?
View 7 Replies View RelatedCisco :: Series 800 Factory Default Restore?
Feb 1, 2013I'm having trouble with an 800 series router. Work has borrowed it to me so i can practice for my icnd2 exam. Only problem is it has a username and password on it. I have been told i can wipe the device and start over. but i cant get in to the user mode or any mode's as i don't have the user name and password. Is there a way of resetting the router back to factory defaults with out logging in to it?
View 2 Replies View RelatedCisco WAN :: Can't Factory Restore 1711 Router
Feb 22, 2012I found a Cisco 1711 router in our storage room and I want to factory restore it so we can mess around with it or use it as a backup.
I connected a console cable to it and in Hyperterminal on a Windows XP box I want to try the CTRL+BREAK sequence to clear it out. I'm not concerned with the current config or finding the password, I just want to wipe it like it's never been used before.
This is what I get:
System Bootstrap, Version 12.2(7r)XM4, RELEASE SOFTWARE (fc1)
TAC Support: [URL]
Copyright (c) 2003 by cisco Systems, Inc.
C1700 platform with 131072 Kbytes of main memory
[Code]....
D-Link DIR-615 :: Restore The Router To Factory Reset
Feb 1, 2010 I have installed DD-WRT firmware onto my new D-Link DIR-615. It causes some problems and I'd like to re-flash router with orginal firmware. After turning router on with Emergency Room mode and choosing right (as for me) image file I'm getting "Unable to upload the image, please make sure the uploaded file is the correct image." Information.
Firmware downloaded from: [URL]
How can I fix my router? Which firmware file will be correct if not an original?
Cisco Firewall :: How To Restore Factory Configuration On ASA 5505
Jun 18, 2007while configuring my ASA 5505 I changed the IP address range of the internal network. Obviously I made an error because I cannot reach the box neither at the old nor the new address. How can I restore the interface and firewall definitions or reset the box to its initial state ? I found a doc how to reset the password, but not explaining how to restore the complete initial config.
View 10 Replies View RelatedCisco Switching/Routing :: Restore 881-SEC-K9 Factory Startup Configuration?
May 21, 2012I messed up the IOS on the flash of CISCO881-SEC-K9. On reboot it booted to ROMMON which allowed me to tftp up a working IOS c880data-universalk9-mz.151-4.M3.bin. Unfortunately somewhere in my playing around the default startup configuration factory loaded on the routerhas been erased. I can load a new a config on the device but as I'm using the router to learn its useful to have the original config load when I factory reset the device. What is the factory start up config?
View 3 Replies View RelatedWireless :: How To Restore Computer To An Earlier Date
Feb 9, 2011My wife had someone at her school make changes to her laptop (she dosn't know what) so that she could use the school's network (it did not work). Now that she is at home the laptop will not connect to the wireless home network. Is there a way to restore the laptop to a date before the changes were made ?
View 1 Replies View RelatedRestored Computer To Factory Settings And Cannot Connect To The Internet
Oct 10, 2012I just restored my computer (Windows XP) to factory settings and it won't connect to the internet. I'm running an ethernet connection. I tried to look up a solution online but nothing has worked. Also, Im sure its not an issue with the modem, because all the other computers in the office are connecting to the internet just fine. It's only this one computer?
View 5 Replies View RelatedRestore Built In Wireless Connection?
Apr 11, 2011i deleted my built in wireless connection by accident. how can i restore it
View 1 Replies View RelatedLinksys Wireless Router :: Restore Ver.1.0.04 On E3000?
Oct 26, 2012I had a failed Tomato upgrade and now Connect Setup can't see router to revert back to original. I get message 82BD0101 or computer not connected to router. Also the http://192.168.1.1 trick won't work. Is there any way to restore besides 30/30/30?
View 2 Replies View RelatedLinksys Wireless Router :: How To Restore And Update E1000
Aug 16, 2011My husbands laptops hard drive crashed and burned. Some of the memory was saved and loaded on the new hard drive one good thing is that I don't have to reload the wireless into the system. Okay that is fine but the problem it ask for the code key that I loaded it with when I first installed it. I lost it. Then I got on through the guest system and I forgot the password. I just want to get on and update the windows so that my husband will be able to enjoy his laptop again. I don't like sharing computers .
View 8 Replies View RelatedLinksys Wireless Router :: E4200 - Restore Previous Version Of Firmware?
Dec 27, 2012I have an E4200 router with 3 WET610N access points. I did the firmware update on the E4200 router about 2 weeks ago so my son could use his xbox when he got home after 4 months of being away. Everything seemed to work OK as far as I could tell....but when he went to sign into xbox live and watch Netflix, it will load to 98% and stop. A friend of his came over with the new Slim xbox 360 with built in wireless and it will connect fine on its own, if we hook up one of the 610N's to it, it will load to 98% on Netflix and stop again with error code R8152. Both of my older xbox's will hook up and play on xbox live, just not work with Netflix.
I also noticed, it shows the WET610N as a hard wire on xbox and will not search for any wireless networks, I have 2. The newer Slim xbox360 will search out both networks on its own if you allow it to use its internal wireless. This only happened since the firmware update. And this equipment was working fine before this. Is there a way I can restore the previous version of firmware?
TP-Link 300Mbps Wireless :: TL-WR1043ND - Possible To Restore It Connected Rs232 Or Jtag
Nov 8, 2012Region : Argentina
Model : TL-WR1043ND
Hardware Version : v1
my router is dead after my try of dd-wrt. it just flush 4 led and not respond. can i restore it connected rs232 or jtag? of cause know that it is not warranty at all, just need some diagram or something.
Factory Settings For Wireless Routers?
Nov 29, 2011i don't have the cd to set my wireless router back up, so how do I go back to factory setup without it?
View 2 Replies View RelatedFactory Reset PC And No Wireless Driver Exists
Dec 29, 2012I am the owner of an Asus N53SV series laptop running windows 7 home premium. I factory reset my PC in order to have a "fresh" new year, but now I can only connect to the wireless internet in my house using the ethernet cable. When the cable is unplugged, no networks show up for my laptop. I tried going to this link: ASUSTeK Computer Inc. -Support- Drivers and Download N53SV I downloaded the first wireless driver listed...and it gave me an error that just said "error azureware wireless lan driver"....not a very informative error.
View 13 Replies View RelatedCisco Wireless :: 1142 AP Won't Set To Factory Defaults
Aug 28, 2011I have an 1142 AP that I am unable to set back to factory defaults.Here is what I have done so far:
- boot AP while holding down the mode button
- ap: delete flash:private-multiple-fs
- yes
- ap: boot
- when the AP boots fully I try and enter any lwap ap commands and get "ERROR!!! Command is disabled"
- the AP name and password were reset to defaults but I am unable to get the IP address cleared.
I've also tried "clear lwapp private-config" and get an error saying the command is disabled.
Linksys Wireless Router :: WRT160N Hangs - Restore Original Firmware In Case Update Fails?
Jun 16, 2008I purchased a WRT160N router last Friday. After setting it up, everything seemed to work fine, but after a couple of hours, the router stopped responding to any requests. The LEDs stayed on as if nothing had happened, but the router was dropping everything coming from both the WAN and a wired LAN interface. Since than, I had to restart it 3 times during the last 3 days.The firmware is 1.53.0, which seems to be the latest firmware for the European market - even when I try to get a newer firmware, this site only offers the US version 1.02.2.Should I update the firmware to the US version 1.02.2 ? Is there any difference between the 1.53.0 and the 1.02.2 version ? Is there a way to restore the original firmware in case the update fails ? I haven't found any link to 1.53.0 version..Also, does this firmware updating affect my warranty ?
View 9 Replies View RelatedWireless :: HP 7410 Printer - No Factory Setup Disk
Aug 13, 2012With converting my hp 7410 printer to wireless. It has wireless capability but i do not have the factory setup disk. What can i do?
View 1 Replies View RelatedLinksys Wireless Router :: Factory Firmware For WRT120N
Aug 15, 2011how to get the factory firmware version 1.0.01. I have a problem with the settings. I want to return to the basic version, but can not find anywhere else.
View 4 Replies View RelatedCisco :: 1252 Wireless AP Resetting To Factory Default
Jan 5, 2012I have a used 1252 wireless AP. I can't get into it. How do I reset to factory default?
View 1 Replies View RelatedCisco Wireless :: Factory-Default Reset For AP3600?
Dec 17, 2012How to reset a CAPWAP AP3600 to factory default using the AP's CLI and not the controller.
View 2 Replies View RelatedCisco Wireless :: 1130 AP Default Factory Setting
Sep 15, 2012Any info on successfully resetting an light weight 1130 AP to the factory settings? I tried the method described in the doc for 1130 on how to reset 1130 AP to the default settings, but it was not successful. I tried shutdown the AP, and plug in the power while press and holding the Mode button for about 3 seconds.This AP has lost it association with the WLC, is there anyway i can reset the AP to factory default and put in the correct IP address again?
View 3 Replies View RelatedCisco Wireless :: Remotely Factory Reset AP-1231G Through SSH
Jan 23, 2013Is there any possible way to factory reset an AIR-AP1231G-A-K9 that was once attached to a WLC via SSH? I dont have physical access to it and the old WLC has long been decommissioned. I have tried the clear command but since it is in CAPWAP mode that command has been disabled. I know I can press and hold the mode button and reset it that way but I need to know if its possible through SSH to be reset. I have two that are in need of being reset in order to connect to the new WLC.
View 21 Replies View RelatedWindows 7 - Can't Detect Any Wireless Networks / Restored To Factory Settings
Sep 20, 2012A few hours ago, I just restored my laptop to factory settings. Once it was done, I tried connecting to the internet but the computer could not detect ANY wireless networks!I already know it is not the modem or router because I have a Macbook Pro and two HP laptops that connect perfectly fine to the modem. I also made sure the wireless is on. The laptop with the problem is a Toshiba Satellite l645. It's running on a 64-bit Windows 7. When I try to look up wireless networks, it only shows 'MOBILE BROADBAND CONNECTION".
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersNguyen Family>ipconfig/all
Windows IP Configuration
[code]...
Linksys Wireless Router :: WRT54G Resetting To Factory Default By Itself?
Aug 11, 2008I have a WRT54G router Ver. 5 with firmware v. 1.02.5. This is the second time this has happened to me but the router reset itself to the factory defaults. I lost all my configurations. I'm saving the configuration this time but it will be annoying to keep having to reconfigure the router.
View 9 Replies View RelatedLinksys Wireless Router :: WRT160N - Factory Settings Reset?
Jun 7, 2010How to reset my router to factory settings so i can install it on a new computer
View 2 Replies View RelatedLinksys Wireless Router :: Wrt54gl Won't Reset To Factory Default
Jul 25, 2012i have a wrt54gl version1.1 ok so let me start from the beginning.a few months ago i left the contry so a friend of mine asked me to lent him my router. a few day`s ago i got back and got my router back. it was working fine until i got it back. the rest button won`t work. i can`t reset the router to factory default. the user name was blank and the password was admin.now it won`t let my to do that.
View 9 Replies View RelatedLinksys Wireless Router :: Reset WRT54G2 V1 To Factory Settings?
Dec 29, 2009Iused my installation cd to re-setup my linksys. I moved and used a laptop previously. Now i am at a house that has a desktop. I want to keep the desktop wired and make my laptop wired. So, when i went to re-install it said i had to reset my linksys to factory settings.
View 2 Replies View RelatedLinksys Wireless Router :: E4200 Reset To Factory Default
Nov 26, 2012Due to password loss, I get to reset the E4200 to factory default in order for router re-config.After pressing the reset buttom for 10sec, the router reset. After then, I could not access the router via browser with 192.168.1.1 at URL entry. My PC IPv4 setup: 192.168.1.11; subnet=255.255.255.0.But, ping 192.168.1.1 from PC was OK without packet loss. So router was restored with 192.168.1.1 and cable connection was OK.
View 2 Replies View Related