Windows 7 - Can't Detect Any Wireless Networks / Restored To Factory Settings

Sep 20, 2012

A few hours ago, I just restored my laptop to factory settings. Once it was done, I tried connecting to the internet but the computer could not detect ANY wireless networks!I already know it is not the modem or router because I have a Macbook Pro and two HP laptops that connect perfectly fine to the modem. I also made sure the wireless is on. The laptop with the problem is a Toshiba Satellite l645. It's running on a 64-bit Windows 7. When I try to look up wireless networks, it only shows 'MOBILE BROADBAND CONNECTION".

Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersNguyen Family>ipconfig/all
Windows IP Configuration

[code]...

View 4 Replies


ADVERTISEMENT

Dell :: Restored Inspiron N5010 To Factory Settings And No Longer Have Wireless

Jul 11, 2013

I installed the drivers that came installed on the PC.

I looked at the settings and confirmed that they were correct per my internet provider.

Enernet works and I can hook up using cable.  But the PC used to auto detect all wireless connections available. Now it detects nothing.

View 3 Replies View Related

Restored Computer To Factory Settings And Cannot Connect To The Internet

Oct 10, 2012

I just restored my computer (Windows XP) to factory settings and it won't connect to the internet. I'm running an ethernet connection. I tried to look up a solution online but nothing has worked. Also, Im sure its not an issue with the modem, because all the other computers in the office are connecting to the internet just fine. It's only this one computer?

View 5 Replies View Related

Windows Could Not Detect Networks Proxy Settings

Jan 6, 2012

the virus is no longer a problem. Now, I cannot get the computer to connect to the internet via wireless OR wired connection. The computer will connect to the router and I can see other computers on the network, but I continue to see the warning triangle that says "No Internet Access." When running the diagnostics on the connection I receive "Windows could not detect the networks proxy settings."

View 2 Replies View Related

Linksys Wireless Router :: EA4500 Cannot Connect To Internet - Restored To Factory Configuration

Jul 9, 2012

I've bought the EA4500 and configured it to connect to internet. it works fine.however, one day after it, it can't connect to the internet anymore.I go to the router setup page and try to manually connect it to the internet, but it keeps "connecting." I then restore to its factory configuration, then do the configuration again and it can successfully connect to the internet.however, one day after it, again, it can't connect to the internet anymore.

View 2 Replies View Related

Windows Vista - Reset Router To Factory Settings Now Cannot Configure

Feb 6, 2012

I have windows vista, and forgot my network password. I reset my router to factory settings by pushing the reset button on the back.I tried reconfiguring the router from the network icon, but at the end of the process it says it cannot configure my router.I lost my internet service in the process

View 1 Replies View Related

Windows Could Not Automatically Detect Network's Proxy Settings

Nov 26, 2011

I am running Windows 7 and I use a ZyXEL ZyAIR G-220 Wireless USB adapter for internet. I had a virus called something like Cloud AV 2012 so I used Malware Bytes to remove it and it worked just fine. However, now the internet does not seem to work (there's that yellow triangle with the exclamation point) and when I try to run diagnostics, the message "Windows could not automatically detect this network's proxy settings" comes up. So far, I've tried rebooting, disabling proxies in all of my browsers, and running scans, And I also cannot system restore, because apparently windows security was turned off and there are no restore points

View 1 Replies View Related

Windows 7 Could Not Automatically Detect Network Proxy Settings

Oct 20, 2011

I'm on windows 7 btw.When I diagnose the problem it says: Windows could not automatically detect this networks proxy settings I'm connected to the internet via cable on my laptop. Yes I'm using a router. The other computers connected to the router can connect to the internet but mine can't. It also says "unidentified network - no internet access" when I click on the computer icon in the bottom right corner of the screen. until I downloaded from a music site which gave me the virus I think. Now, I'm not certain if the virus is removed or not. I tried system restore point but it won't even let me restore my computer anymore for some reason, maybe because of the virus.

View 19 Replies View Related

Windows Could Not Automatically Detect Network Proxy Settings

Jan 5, 2013

I'm using my old laptop now. On my regular laptop, my internet icon has the yellow triangle and when I trouble shoot it, the message says "Windows could not automatically detect this network's proxy settings".Recently I noticed my computer was heating faster (and hotter) than usual so I ran a search again and it said no threats were found. I have ran the search twice since then and still nothing. I was advised to use ccleaner,malwarebytes, and Super Anti-Spyware. It removed one other threat but the problem was still there. I then started using combofix, but I did not like the look of it so I stopped that scan. It seemed a little sketchy. As of this morning, I'm having the internet problem. My old laptop (the one I'm on now) and my girlfriend's laptop work fine. I connected it with the Ethernet cord and that didn't change anything. I have Windows 7. It's on a 2010 Samsung (I'm not very tech savvy so I'm not sure about all the other details).

View 14 Replies View Related

Dell :: Restored 1545 And Doesn't Detect Wi-Fi Connection?

Jun 30, 2012

I restored my computer from fabric, buy it doesnt recognize the wifi connection

View 5 Replies View Related

Restored Acer Aspire 5251-1007 Now Can't Detect Wifi

Feb 8, 2012

Why i can not see my network adapters in my Acer aspire 5251 I did a quick searching about my ipconfig all how I can rresolve to bring back my network adapters

Windows IP Configuration
Host Name . . . . . . . . . . . . : Francis-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

[code]....

View 5 Replies View Related

Windows Could Automatically Detect This Networks Proxy But Device Not Responding

Jan 1, 2013

sometimes my net will randomly dc and wen i trouble shoot it says "windows could automatically detect this networks proxy" and then when i go to diagnose it says "your computer appears to be correctly configured but the device or resource (dns server) is not responding.

View 17 Replies View Related

Asus X5DIJ Laptop - Windows Could Not Automatically Detect Network Proxy Settings

Apr 20, 2012

The other day i was on my mums laptop (ASUS X5DIJ) at her house all working fine the battery died so i plugged it in and started it up again however the charger cant have been fully connected and once back in windows the battery died again on the next boot i noticed windows said it had found the system CMOS/real time clock and had installed drivers for it. checked the driver details it says no driver files are required just like it should ever since then it connects to the network but will not connect to the internet at her house or at mine through wireless and ethernet cable although all other computers work fine windows troubleshooter says "Windows could not automatically detect this networks proxy settings"

I've tried
resetting routers and laptop = no change
netsh winsock reset and netsh int ipv4 reset = no change
ipconfig /flushdns = no change
ipconfig /registerdns = no change

[code]....

View 9 Replies View Related

Restored Laptop To Original Settings - Not Responding Error?

Apr 16, 2011

Now I am having major issues,running super slow and can't connect to ie. Keeps giving error not responding

View 1 Replies View Related

Factory Settings For Wireless Routers?

Nov 29, 2011

i don't have the cd to set my wireless router back up, so how do I go back to factory setup without it?

View 2 Replies View Related

Cisco Wireless :: 3502i - How To Restore The Factory Settings

Jul 18, 2012

The ap 3502i has been registered to the wireless controller, but now want to restore the factory settings, repeated after the upgrade or will appear before the registration information of the wireless controller,

View 3 Replies View Related

Linksys Wireless Router :: WRT160N - Factory Settings Reset?

Jun 7, 2010

How to reset my router to factory settings so i can install it on a new computer

View 2 Replies View Related

Linksys Wireless Router :: Reset WRT54G2 V1 To Factory Settings?

Dec 29, 2009

Iused my installation cd to re-setup my linksys. I moved and used a laptop previously. Now i am at a house that has a desktop. I want to keep the desktop wired and make my laptop wired. So, when i went to re-install it said i had to reset my linksys to factory settings.

View 2 Replies View Related

Laptop Does Not Detect Any Wireless Networks

Jun 22, 2011

My HP laptop's wireless does not detect my home wireless network.The wireless is on, there is internet connectivity and other devices at my house detect the network but not my laptop. i hve already spent so much of time in finding out the problem.The driver for the wireless is installed and updated.The service is running. Checked the Wireless Zero Configuration.

View 9 Replies View Related

Laptop Won't Detect Wireless Networks?

Jun 28, 2012

So about a week ago my computer stopped picking up wifi signals even though I know they're active. I can connect to the internet using an ethernet cable, but my computer doesn't even detect the wireless internet that any device puts out

View 3 Replies View Related

Wireless Adapter Will Not Detect Any Networks?

Nov 16, 2012

A couple of weeks ago, my laptop (vista) suddenly started not detecting any wireless networks anymore. Wired internet still works. Wireless suddenly went 'poof'.Since then, I tried basically everything. I rebooted the wireless adapter, rebooted laptop, the network is most definately in range of the laptop, updated the driver and all didn't work. Yes, the adapter is turned on, obviously. When I look into device manager, there are yellow exclamation marks next to the microsoft 6to4 adapter and the ISATAP adapter, so I also tried updating those. Didn't do anything. They still show a code 10. So i disabled both of them, also didn't work. I deleted and reinstalled both too. I even tried disabling 6to4 in the bios but didn't work.Device manager says my Intel (R) wifi Link 5100 AGN adapter works perfectly. Also updated it, un- and reinstalled it => no effect.

Though, even without those exclamation marks, i'm pretty sure my network doesn't send out much ip6 stuff, so it should still work... But it's not just my network at home, it simply won't detect any wireless networks anymore.Also tried windows recovery to put it back in the state before it wouldn't work anymore, but no effect.

View 2 Replies View Related

Dell :: Cannot Detect Wireless Networks On XPS L401

Dec 14, 2012

I have a Dell XPS L401 with Windows 8 PRO. My laptop is not able to detect any wireless networks even when my Wireless Switch is On.

My System information is

Host Name: OS Name: Microsoft Windows 8 Pro with Media CenterOS Version: 6.2.9200 N/A Build 9200OS Manufacturer: Microsoft CorporationOS Configuration: Standalone WorkstationOS Build Type:

[Code].....

View 1 Replies View Related

Wireless :: Laptop Message Says Can't Detect Proxy Settings

Jan 4, 2011

laptop message says cant detect proxy settings

View 5 Replies View Related

Cabling / Cards :: Wireless Card Can Only Detect Ad Hoc Networks

Oct 18, 2011

Now my problem started happening after my desktop computer got unplugged. When I booted back up, I was unable to connect to my access point. Or find any of the other networks it can always see. I took my laptop and set up an ad hoc network and it came right up. The wireless access point has not been changed and it is perfectly fine. I've updated the drivers from Ralink, nothing. Uninstalled and rebooted, nothing. Checked the BIOS for any settings, nothing. Made sure the radio was turned on, nothing.

View 6 Replies View Related

Dell :: Inspiron N4050 Cannot Detect Wireless Networks

Feb 23, 2012

i am using Dell inspiron model N4050 my laptop does not seem to detect any wireless networks around and i am unable to connect to wifi, networks works fine with ethernet cable.My drivers are up to date.I have done and tried everything i know of.

I  typed "cmd ipconfig /all" and that's what I received.

C:UsersDell>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Dell-PC   Primary Dns Suffix  . . . . . . . :   Node Type . . . . . . . . . . . . : Hybrid   IP Routing Enabled. . . . . . . . : No   WINS Proxy Enabled. . . . . . . . : No
[Code] ....

View 3 Replies View Related

Dell :: Latitude D610 - Cannot Detect Wireless Networks

May 25, 2013

i received a dell latitude D610 and installed the operating system and the drivers, when i open the network adapters in device manager it says i have the Broadcom NetXtreme 57xx gigabit controller. when i try to connect to the internet with a cable it works fine but it wont let me detect wireless networks or if i unplug the cable an error pops up saying A network cable is unplugged i dont know if i have the right driver(s) installed.

View 2 Replies View Related

Netgear Factory Settings?

Nov 17, 2012

I have rebooted my netgear router to the factory settings and now the internet wont work , i have no idea how to get it to work again. On the box all the right lights are green exept the internet light which is red.

View 1 Replies View Related

Can't Reset Arris Wtm652 To Factory Settings

May 5, 2011

I am locked out of my Arris wtm652 (unable to login with default password or the password that i set). I have tried every way I know of to reset the modem outer to its factory settings but to no avail. I know that it is not being reset because I still can not login to it and it is maintaining the wireless security settings that were set for it.

View 1 Replies View Related

Resetting Modem / Router To Factory Settings

Oct 8, 2011

Got a Belkin wireless modem router some 18 monthes ago, and after a bit of a struggle managed to set it up. It worked fine, aside from the odd depower repower. For some reason, it just stopped working yesterday. I initially checked all my cabling etc and everything seems fine. I next tried resetting my modem/router to factory settings. When I tried to install the Belkin software I fell at the first hurdle with a message saying "The setup assistant is not able to connect to the router". After googling my issue, I followed others advice and running the cmd setting and typing in "ipconfig" only to find that my media state was disconnected.

View 2 Replies View Related

Dell :: Inspiron 15 M5040 - Factory Settings

May 20, 2013

Had to so a install back to factory settings now I have no access to Internet, says network controller is missing, have tried downloading drivers but obviously not downloading the right one.

View 2 Replies View Related

D-Link DIR-655 :: Cannot Access Router Or Reset Factory Settings

Jul 22, 2010

My computer is an XPS 360 with alot of upgrades.  After looking at the specs of D-links routers I thought I give it a try.  Hooked up, works like a dream.  Couple months later my computer was saying I have "limited connectivity."  All of the other computers have full access and works great.  I tried going to my routers home page, but all I get  is "The server at 192.168.0.1 is taking too long to respond."  Ive tried renewing the ipconfig, restarting everything, new cables....everything I can imagine.  I tried calling my ISP and they told me it wasnt there fault, that its pretty much on my end.  I called Dell for support, said my warranty went out and they cant do a thing.

View 14 Replies View Related

D-Link DIR-601 :: Upgrading Firmware From 1.0 To 1.02 Will It Default Factory Settings?

Aug 6, 2011

I currently have this router in use with verizon dsl (PPPoe) setup.I have this set to "always on". Since the verizon modem, which is also router has been set into bridge mode and the d-link came into play its been extremely slow, and dropping connection. The router is in a separate IP class, and has no conflict with the modem. My question is, if I upgrade this firmware from 1.0 to 1.02 will it default to factory settings? I know it says only some will. I do have the backup config file, but i would be doing this remotely, and would not be able to get to this router if it goes down. Has anyone gone from 1.0 to 1.2 and saw a difference and speed, and are you able to do this without losing settings.

View 3 Replies View Related

Cisco Switches :: How To Set SG200-08P To Factory Default Settings

Oct 18, 2011

We need to "reset" a SG200-08P switch back to the factory default settings and noted the "Quick Start Guide" implies the "Reset" button next to the power button doesn't exist and refers the user to the "Cisco Small Business Smart Switch Administration Guide" for instructions.  We couldn't find any information related to a "factory reset" in that document either.  Pressed the "paper clip button" on the switch but we still can't get in. 

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved