Dell :: Inspiron 15 M5040 - Factory Settings

May 20, 2013

Had to so a install back to factory settings now I have no access to Internet, says network controller is missing, have tried downloading drivers but obviously not downloading the right one.

View 2 Replies


ADVERTISEMENT

Dell :: Restored Inspiron N5010 To Factory Settings And No Longer Have Wireless

Jul 11, 2013

I installed the drivers that came installed on the PC.

I looked at the settings and confirmed that they were correct per my internet provider.

Enernet works and I can hook up using cable.  But the PC used to auto detect all wireless connections available. Now it detects nothing.

View 3 Replies View Related

Dell :: Inspiron M5040 / Network And Ethernet Controller Driver

May 10, 2012

I recently sent in my Inspiron M5040 laptop in to get repaired because it got severely water damaged and when i got it back i culdnt connect to the internet wirelessly so i tried pluggin in my ethernet cable an that wouldnt work either so i played around with my computer a little bit and saw that my ethernet and network controller drivers weren properly installed. How do i get those two drivers with no internet connect? Is there any way i can get a disk mailed to me with all of the up to date drivers i ned or do i need to ship my laptop back in to dell?

View 1 Replies View Related

Dell :: Reinstall Original Factory Software For Inspiron 1300?

Nov 18, 2012

I have a Inspiron 1300 System-ME051 service tag-<Admin Note: removed per privacy policy~RK>.After reformatting the hard drive I have lost my drivers. My laptops orginal operating system was XP (home edition).  I install xp professional service pack 2 since its the only CD I have available. where can I get a full factory cd or download all drive

View 1 Replies View Related

Dell :: Can't Use Bluetooth M5040

Jun 23, 2012

i just bought a new inspiron m5040 but i can't use the bluetooth.

View 2 Replies View Related

How To Change Proxy Settings On A Dell Inspiron

Feb 6, 2011

I have a Dell Inspiron and it had a virus that didnt let me get into anythihng I took care of the virus, but now when I go to internet explorer it says I cant connect (I am connected to the wifi) so it tell tells me something about tools-internet options-connections-LAN settings, but I have no idea how to fix the proxy settings?

View 1 Replies View Related

Dell :: M5040 Connected To Wireless Network But No Internet

Sep 23, 2012

I have a Dell Inspiron M5040 with Window 7 64 bit.  Just recently it has started giving problems.  I can connect to my wireless network but no internet access.  I have check all the settings like DHCP enabled.  I have an IP address but no internet access.  If I use an ethernet cable I can connect to the network and internet without a problem.  What could be the problem.

View 1 Replies View Related

Dell :: Inspiron 154 / Internet Explorer Will Not Change Highlight Color Settings For Search Pages Viewed

Jun 3, 2012

My Internet Explorer will not save settings/changes to highlight color of viewed pages in search results. It will not highlight search pages that have been viewed at all. I have Internet Explorer 9 & Windows 7 - 32 bit on a Dell Inspiron 1545. I have uninstalled & reinstalled Internet Explorer 9. Above mentioned application did not work on either Internet Explorer 8 or 9. I have cleared all cookies, deleted all temp. internet files, optimized disc space twice & done a Full scan w/ my Norton. I go to color setting under Internet Explorer make the changes & hit each "OK", but the changes don't take. The "Apply" button is recessed and is not functioning. This has been the problem for approximately the last week and 1/2, before that color highlighting function was working. This color highlighting feature of viewed pages does work in Mozilla fire fox, but that is not what I want to use.

View 1 Replies View Related

Netgear Factory Settings?

Nov 17, 2012

I have rebooted my netgear router to the factory settings and now the internet wont work , i have no idea how to get it to work again. On the box all the right lights are green exept the internet light which is red.

View 1 Replies View Related

Factory Settings For Wireless Routers?

Nov 29, 2011

i don't have the cd to set my wireless router back up, so how do I go back to factory setup without it?

View 2 Replies View Related

Can't Reset Arris Wtm652 To Factory Settings

May 5, 2011

I am locked out of my Arris wtm652 (unable to login with default password or the password that i set). I have tried every way I know of to reset the modem outer to its factory settings but to no avail. I know that it is not being reset because I still can not login to it and it is maintaining the wireless security settings that were set for it.

View 1 Replies View Related

Resetting Modem / Router To Factory Settings

Oct 8, 2011

Got a Belkin wireless modem router some 18 monthes ago, and after a bit of a struggle managed to set it up. It worked fine, aside from the odd depower repower. For some reason, it just stopped working yesterday. I initially checked all my cabling etc and everything seems fine. I next tried resetting my modem/router to factory settings. When I tried to install the Belkin software I fell at the first hurdle with a message saying "The setup assistant is not able to connect to the router". After googling my issue, I followed others advice and running the cmd setting and typing in "ipconfig" only to find that my media state was disconnected.

View 2 Replies View Related

Restored Computer To Factory Settings And Cannot Connect To The Internet

Oct 10, 2012

I just restored my computer (Windows XP) to factory settings and it won't connect to the internet. I'm running an ethernet connection. I tried to look up a solution online but nothing has worked. Also, Im sure its not an issue with the modem, because all the other computers in the office are connecting to the internet just fine. It's only this one computer?

View 5 Replies View Related

D-Link DIR-655 :: Cannot Access Router Or Reset Factory Settings

Jul 22, 2010

My computer is an XPS 360 with alot of upgrades.  After looking at the specs of D-links routers I thought I give it a try.  Hooked up, works like a dream.  Couple months later my computer was saying I have "limited connectivity."  All of the other computers have full access and works great.  I tried going to my routers home page, but all I get  is "The server at 192.168.0.1 is taking too long to respond."  Ive tried renewing the ipconfig, restarting everything, new cables....everything I can imagine.  I tried calling my ISP and they told me it wasnt there fault, that its pretty much on my end.  I called Dell for support, said my warranty went out and they cant do a thing.

View 14 Replies View Related

D-Link DIR-601 :: Upgrading Firmware From 1.0 To 1.02 Will It Default Factory Settings?

Aug 6, 2011

I currently have this router in use with verizon dsl (PPPoe) setup.I have this set to "always on". Since the verizon modem, which is also router has been set into bridge mode and the d-link came into play its been extremely slow, and dropping connection. The router is in a separate IP class, and has no conflict with the modem. My question is, if I upgrade this firmware from 1.0 to 1.02 will it default to factory settings? I know it says only some will. I do have the backup config file, but i would be doing this remotely, and would not be able to get to this router if it goes down. Has anyone gone from 1.0 to 1.2 and saw a difference and speed, and are you able to do this without losing settings.

View 3 Replies View Related

Cisco Wireless :: 3502i - How To Restore The Factory Settings

Jul 18, 2012

The ap 3502i has been registered to the wireless controller, but now want to restore the factory settings, repeated after the upgrade or will appear before the registration information of the wireless controller,

View 3 Replies View Related

Cisco Switches :: How To Set SG200-08P To Factory Default Settings

Oct 18, 2011

We need to "reset" a SG200-08P switch back to the factory default settings and noted the "Quick Start Guide" implies the "Reset" button next to the power button doesn't exist and refers the user to the "Cisco Small Business Smart Switch Administration Guide" for instructions.  We couldn't find any information related to a "factory reset" in that document either.  Pressed the "paper clip button" on the switch but we still can't get in. 

View 7 Replies View Related

Cisco Infrastructure :: Resetting 2431 IAD To Factory Settings?

Dec 10, 2012

I am at the rommon screen getting the > sign
 
Rommon 1>
 
When I am typing confreg 0x2142 I am just getting “rommon 2>” and if try again I will get “rommon 3 >”
 
No reset prompt , this never happened to me

View 1 Replies View Related

Windows 7 - Can't Detect Any Wireless Networks / Restored To Factory Settings

Sep 20, 2012

A few hours ago, I just restored my laptop to factory settings. Once it was done, I tried connecting to the internet but the computer could not detect ANY wireless networks!I already know it is not the modem or router because I have a Macbook Pro and two HP laptops that connect perfectly fine to the modem. I also made sure the wireless is on. The laptop with the problem is a Toshiba Satellite l645. It's running on a 64-bit Windows 7. When I try to look up wireless networks, it only shows 'MOBILE BROADBAND CONNECTION".

Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersNguyen Family>ipconfig/all
Windows IP Configuration

[code]...

View 4 Replies View Related

Windows Vista - Reset Router To Factory Settings Now Cannot Configure

Feb 6, 2012

I have windows vista, and forgot my network password. I reset my router to factory settings by pushing the reset button on the back.I tried reconfiguring the router from the network icon, but at the end of the process it says it cannot configure my router.I lost my internet service in the process

View 1 Replies View Related

Linksys Access Point :: WAP54G Won't Reset To Factory Settings

Mar 23, 2013

I was having some connectivity issues with my network of WAP54G's, so I had a technician come to have them looked at. The technician turned out to be completely clueless, and he messed up one of the APs in the process. He changed its IP address and apparently updated its firmware, but he didn't write the new address down, so now I can't access its administrator panel. I've tried to retrieve the IP address using the setup CD that came with the AP, but it doesn't even see the AP in my network. I've tried to factory reset the AP by holding the reset button for 10, 30 and 60 seconds and unplugging the power cord, but to no avail. It still doesn't bring up the admin panel when I enter the default IP in the browser. I think I've tried everything I could find on the Internet about this problem that didn't involve cracking the AP open, but none of it has worked.

View 4 Replies View Related

Linksys Wireless Router :: WRT160N - Factory Settings Reset?

Jun 7, 2010

How to reset my router to factory settings so i can install it on a new computer

View 2 Replies View Related

Linksys Wireless Router :: Reset WRT54G2 V1 To Factory Settings?

Dec 29, 2009

Iused my installation cd to re-setup my linksys. I moved and used a laptop previously. Now i am at a house that has a desktop. I want to keep the desktop wired and make my laptop wired. So, when i went to re-install it said i had to reset my linksys to factory settings.

View 2 Replies View Related

Cisco Firewall :: Pix 515e To Reset The Device To Factory Settings

Aug 12, 2011

I have completed my CCNA qualification and i am doing some volunteering for a  none proffit eletronics recyciling company they receved some cisco pix 515e  firewalls and i was aloud to keep one so i can learn how hardwaire firewalls  work and how to set them up but i can not seem to connect to it is there a way  to completely reset the device to factory settings without any ip address or  passwords i do not have any cables for the device but i have made a straight and  cross over cable and there is a box of cables at the recyciling company from  diffrent places if i need a specialist cable i may be able to find one

View 6 Replies View Related

Cisco Routers :: RVS4000 Necessary To Reset To Factory Default Settings

Feb 15, 2009

Recently purchased a RVS4000 Router, which included v1.1.14 firmware. Is it necessary to reset the router to Factory Default settings, after upgrading to v1.2.11, as in most of the other previous upgrades?

View 37 Replies View Related

D-Link DIR-615 :: It Freezes Every Night And Reverts To Factory Settings When Power-cycled

Dec 4, 2011

Our DIR-615 has started freezing and when reset (power cycled), it reverts to factory settings.This has been running 24/7 for several months with no problem. Three days in a row now I've woken up to find our home network is down and the DIR-615 status lights are "yellow". Power cycling the DIR615 resolves the problem however the DIR-615 looses its settings, reverting to factory defaults (looses the admin password, wireless settings, etc). I can reload the settings from a file saved on my computer but needless to say, this is a bit annoying. I don't believe there are any wireless clients connected at the time as most of the wireless is served by an airport two floors up. There are several wired devices always connected:

a Zoom ATA carrying our "land line"
a tivo (doing whatever tivo boxes do)
a SSL based Voip phone (different than the zoom ata)
an AirPort Express 802.11n (bridge mode) which may have a couple of wireless clients
a laptop which may or may not be sleeping at the time

There are a couple of ethernet switches in the network.Some of the devices acquire addresses via DHCP, others are assigned fixed addresses outside the range of the DHCP addresses served by the DIR-615.Nothing has changed on the network in months.

The only settings I've messed with on the DIR-615 are:

   a) set the admin/user passwords

   b) Set the wireless network name, enable WPA, set the WPA Key

   c) enabled ntp (this is now disabled and I've set the time manually)

   d) Change the network base from 192.168.0. to 192.168.4.

The DIR-615 is hardware rev E3, Firmware 5.10 The cable modem (from RCN) is a Scientific American model DPC2100R2

View 12 Replies View Related

Cisco Security :: Can Set IP's 4260 Into Factory Default Settings With Single Command

Feb 20, 2012

Can we set ips 4260 into factory default settings with a single command?

View 0 Replies View Related

Cisco Routers :: WRVS4400N - Automatic Revert To Factory Default Settings?

Jan 23, 2013

I had something strange happen to my WRVS440N router yesterday. Our network had crashed for some reason. So I attempted to log into the device to see what was wrong and I was surprised to discover that all of the settings including user name and password had reverted back to factory default.
 
1. What are all of the possible scenarios that would cause this to happen?

2.Would disconnecting power in the middle of a boot up sequence cause the router to revert to factory settings?

View 1 Replies View Related

Dell :: Mini 1011 - Factory Installed Wireless Program?

Nov 28, 2011

I have a Dell Mini 1011 model.  When updating some software, I accidentally removed the factory installed wireless software.  I installed something but it constantly disconnects and says "multiple wireless networks are available" and makes me reconnect manually.  We have other laptops in the house using the same wireless, and they are having no issues. 

View 1 Replies View Related

Dell Inspiron 1564 With Dell Webcam Central Will Not Allow Access

Apr 9, 2011

I have an Dell inspiron 1564 with dell webcam central I been useing it a while now and had no problems with it untill one day I logged on and I go on webcam chat sites and as you know theres a button you click for your cam to turn on and useally a warning sign would appear saying would you like to allow this site to acces your webcam and I would click allow but now nothing appears and i click the cam sign and nothing happens just black I set the settings to Allow and always remember but nothing will work I was told to get rid of all my toolbars as they might of caughts the problem so I did and now i don't have any toolbars but it's still in not working I think its the McAfee secuirty I have a on my computer that is not allowing it but then i think why would it one day just stop it from allowing.

View 4 Replies View Related

Dell :: Wireless Not Functioning In Dell Laptops Inspiron 14r

Apr 18, 2012

I recently purchased dell laptops inspiron 14r.When i press the "A" key for activation of wireless network, it does not work. As my mouse and headset not function.

View 1 Replies View Related

Dell :: Drivers For Dell Inspiron 2500?

Aug 15, 2012

I have an lan / modem card without drivers and cant find them on support drivers website .i have dp/n 06158u revA00 the card manufacturer is Action Tec  and other markings on the card is DS/N TW-06158U-44432-1AF-1803

View 1 Replies View Related

Dell :: D620 Broadcom Net Xtreme 57xx MAC Address Settings

Mar 2, 2007

I'm trying to get my local MAC address changed for Broadcom NetXtreme 57xx adapter in D620 running winXP. Based on Broadcom advice this should be pretty straightforward.In Microsoft Windows, right-click the Network Adapter in Network Connections and then click Properties. Click the Configure button and then the General tab. Configure the "Locally Administered Address" parameter by assigning a unique node address for the adapter. Netware: The Mac Address is configured by the adding Node=XXXXXXXXXXXX parameter to driver load command line in the AUTOEXEC.NCF file, where XXXXXXXXXXXX is the Locally Administered address.
 
However after clicking "configure" in "general" tab I see only "Driver Details, Update Driver, Roll Back Driver, Uninstall" buttons, on "advanced" tab I see "802.1p QOS", "Flow Control" "Speed and Duplex" and "Wake up Capabilities", however I CAN'T see "Locally Administered Address".I've tried :

- reinstalling drivers, at the moment using latest from Broadcom, from 2006-12-15
- reinstalling Dell's drivers
- installing Broadcom's Control suite

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved