I have a Dell Mini 1011 model. When updating some software, I accidentally removed the factory installed wireless software. I installed something but it constantly disconnects and says "multiple wireless networks are available" and makes me reconnect manually. We have other laptops in the house using the same wireless, and they are having no issues.
View 1 RepliesI have a Dell Insipron Mini 1011 and recently I haven't been able to connect to the internet. The network connection says it's connect to linksys, but it sends out more packets than it receives. What can I do to get it to receive more packets? Could it be my area that's causing it not to connect?
View 1 Replies View RelatedI have a notebook that has had wireless installed on it. Other laptops can connect without ethernet cable..but notebook needs it. My carrier has done what they can...but insist there is a program installed on notebook that blocks the wireless signal.
View 2 Replies View RelatedI have a Cisco Wireless Router, Model # WRT160N. I had initally installed it to a laptop. I have a new PC which I am trying to install it to. Unfortunately, when I installed it to the laptop, I put in a new Username and Password. When I tried to install it to the PC, it gets to point of trying to read the router and then gives me the error message "Needs Factory installed Username and Password". I went to the IP site and tried to see where I could delete my Username and Password and reinstall the Factory defaults but cannot locate it.
View 2 Replies View RelatedI have a Vostro 1500 and cannot connect to a wireless network with a dell 1395 WLAN minicard os XP home, what are possible solutions?
View 1 Replies View RelatedI have recently re-installed Windows XP on Dell Inspiron 2200 and notice that I no longer have the icon to view or repair wireless connections. I have installed drivers R91081.EXE (8MB), R92088.EXE (1MB) and INFEENUA.cab (195KB) from Dell web site – Drivers download page but can’t see to be able to bring up the icon.
Which driver(s) I need to download?
I have owned this laptop since 2005. It has been excellent so far and I would very much like to keep using it until it finally gives up.
the computer was using a different program to manage the wireless connection. Even though it said it was connected, my internet didn't work. Not knowing anything about this new program, I removed it and tried to connect with the Windows wireless manager. It didn't acknowledge any of the wireless connections around, just a computer-to-computer connection. I took it to a friend's apartment to use their computer and internet to search for options and it still didn't recognize any networks around, now not even the computer-to-computer connection. It now tells me "No wireless networks were found in range. Make sure the wireless switch on your computer is on...." The Mini doesn't have a "switch," but I read where F2 can turn it on...however, pressing Fn-F2 is not working for me, either.
View 9 Replies View RelatedI have an Inspiron 1012 mini. A week ago, it worked fine and I was able to connect to the internet. Now I can't get it to enable a wireless connection. Using device manager, I can see that Radio is enabled. However, when I use the WLAN utility, the check box for enable/disable is unchecked and grayed out so that I cannot change it. Per suggestions from other forums, I have tried fn/F2, but nothing happens. Is this a hardware problem with my wireless card, or is there something I am missing?
View 22 Replies View RelatedSo I just got this Linksys E1500 wireless N router in hopes that I would get a better signal within my room as opposed to my older router. Unfortunately, nothing has changed, in fact I think I'm getting weaker signals. My previous router was a D-Link WBR-2310. I went to speed test.net and tested 3 variables. My wifi on my desktop in my room, my wifi when right next to a router on my laptop, and my wifi using my neighbors wifi in my room.
What is the point of this new wireless N router, when it can't beat a G router older model in reach? And why does is have a 0.50 mb d/l speed but a 3.6 upload speed?
tell me if the Dell 1502 wireless n mini-card will function on a wireless network working on a/b/g bands?
View 1 Replies View Relatedhere about it : [URL]
To reinstate here. It is a refurbished notebook. I don't know if that has anything to do with my problem. But there is no wireless on/off switch. And pressing FN and F2 at the same time is not enabling my wireless adapter. Is there any way to enable it? Or could I have a faulty wireless adapter?
Cant' seem to find any updated drivers for this card. Just installed new AP's supporting wireless 'n', and can't seem to get the speeds past 54MBS. AP's are configured properly. Under the setting in device manager I can see the rate setting for 802.11(b/g), but not n. If this card is not 'n' compatiable why state that it is. Hoping to get an updated driver . My version is 5.10.235.12 1/7/2011.
View 10 Replies View RelatedI have a DELL Studio 17, with a DW1520 Wireless N WLAN half mini card. Whenever I go to the control panel utility, it tells me there are no wireless adapters, yet, the very fact I have this post up shows I am connected to the Internet. I have wanted to specify a specify local lan IP address but I cannot access the utility... yet the device manager tells me its running ok. However, downloading the utility from DELL, it tells me that there are no compatible devices.
View 12 Replies View RelatedThe wireless network never picks up any signals and when I try to plug in to the modem it doesn't recognize the internet either. Is this a driver issue or what?
View 1 Replies View RelatedI can't connect to the internet using wireless. Can access the internet just fine with my cable. All I see is the red x and its not able to detect any networks. I reinstalled drivers, it works fine for a second, and then dies out again.
View 2 Replies View RelatedWill this wireless card work with a N wireless router?
View 2 Replies View RelatedI have an Inspiron 8600 with a Dell wireless 1350 WLAN mini card. It operated perfectly with a Belkin 54G router but when we changed to a Plusnet Thomson Gateway router I started to lose the signal for about 20 seconds every few minutes. I complained to Plusnet who replaced the router. I have never been able to connect wirelessly since installing this piece of junk. After trying for three solid days I contacted a technician at Plusnet who tried all the usual tricks, even taking over full control of my laptop, without success. He is going to contact Thomson to see if there are any compatibility problems with the Dell 1350 adapter as there are known ones with other Dell adapters.
I suggest Plusnet should not supply this router and further reduce their charges so that customers could supply their own trusted versions.
I have a Dell Inspiron Mini 10 Netbook, when I'm trying to connect to a wireless network I get the message 'Acquring Network Address'. I can connect fine using a wired connection, but using the Wirless 1397 WLAN Mini card it won't connect.
I tried to log a call with Dell as the machine is only 2 months old and someone remotely connected and said it was a software fault not hardware and they would charge me to resolve the issue. I found that hard to swallow so thought I would try here.
I am having problems connecting to the internet. I've tried changing my security from WPA to WEP and back again. I've searched these forums for a solution and nothing has worked. I've changed my antenna output to Aux from Auto as one thread suggested, but no luck.
For a time, I could connect to my wireless BT Home Hub 2, but the range was pathetic (about 4 metres). I've tried connecting to my partners home wireless connection, and again, same problem. Now the connection is virtually nothing. If I am lucky enough to get a connection then it will be poor and usually fail within 2 minutes.
I've had my Dell Inspiron Mini 10v for nearly 3 months now. I wish I was brave enough to return it when I had the chance.People have commented that this could be a known issue. I don't know what the problem is. I've spoken to IT bods my office and nobody seems to know.
Am planning on taking my laptop on a plane but can't work out how to turn of the wireless aerial.
View 1 Replies View RelatedI want to change my wireless mac addres, but i can't.
I tried from the device managger on the usuall way, i tried from regedit and i also tried with mac changer programms.
In the regedit, the Network address changed, but when i type the "ipconfig /all" commant to the cmd it show me my default mac address.
I also tried to connect to the network witch use mac filter (that's, why i want to change my mac) , but i can't.
My Laptop can't connect to the internet wirelessly. Wireless card can connect torouter but once connected to the It can't acquire an IP address.
View 5 Replies View RelatedNew corporate Latitude D600 with Dell installed Cisco mini 350 wireless b card. Getting "Not Associated" status. Dell will not support this card.... %^&$%.
Using a Netgear wireless g router for home office. Attached are a Gateway hard wired and a Toshiba laptop with a Netgear wireless g card. Both are working great. Netgear says router is OK and it supports both b and g. Toshiba laptop identifies every wireless in my neighborhood but the D600 and Cisco cannot detect any signal. I have tried with and without security and every combination setup. Cisco has attempted to correct this problem but are still baffled. When I enable the Cisco card via the network and dial-up setting, it tries to initialize and then posts a message that the "network cable is unplugged"
I have an Inspiron Mini 1018 which all of a sudden I cannot get internet access but I do have the wireless network as being connected. It was working fine but all of a sudden I can't get onto the internet. Have run diagnostics but it doesn't pick up any problems.
View 5 Replies View RelatedI have a 1395 Wlan mini-card in my dell vostro 1510 version A21 and it has stopped allowing internet access. it says limited or no access and when i ran the connection diagnostices it failed the authentication.last time the software was update was october 6, 2008.
View 9 Replies View RelatedI am using a Dell XPS 420 computer running Vista. My wireless network has worked fine until now. I had my video/graphics card go bad and installed a new one (ATI Radeon 4350). That fixed the video problem but since then I have not been able to connect to my home wireless network. Windows suggested that I may have a hardware problem with my network adapter so I replaced it with a new Linksys AE 1200 USB adapter. The device manager says it is working properly but it does not pick up the wireless network�says no networks available. The old computer sitting next to it picks up the network fine. I have reinstalled the adapter several times with no effect. When I click on the wireless network icon and ask it to diagnose the problem it says that 1) the network adapter has a driver or hardware problem (device manager says its working properly) and 2) to make sure that the Internet Protocol Bindings are proper and to make sure that Internet Protocol Version 4 and Internet Protocol Version 6 are selected (those two protocols are selected).
View 1 Replies View RelatedI purchased an Alienware M17x R4 about 2 months ago and it was working perfectly until yesterday. After using it for a while, it disconnected from the WiFi, and after restarting the laptop I got a pop up message saying a physical WiFi adapter is not installed, meaning I can no longer use my wireless connection, but only a cord. Going to device manager, I did not see the wireless hardware on the list of network adapters (Intel® Centrino® Wireless-N 2230 With Bluetooth 4.0), however it is still listed for the Bluetooth. I have already tried reinstalling the drivers, system restore, dell diagnosis (which says there is no problem), AlienAutopsy (which also said there is no problem) and scanning for hardware changes from the device manager, none of this has fixed the issue at all.
View 3 Replies View RelatedI had to default my wireless router " Netgear WGR14V6" and since then I haven't been able to connect with my wireless card. I can physically connect to it with a cable but I can't access it with the wireless card. When I look at the properties it says that it is working fine but I can't seem to find where to change the "SSID and the security phrase". Usually when it is up and running it has a status button and when you click on it there is a tab that you click on and it shows you the SSID and the rest, but now since it is not connected there isn't anything that I can find to change this.
View 1 Replies View RelatedI have dell inspiron 640m with Wireless 1390 WLAN Mini-Card and it is connecting perfectly with any other routers. but i can not connect it to CISCO WAP4410N router ! i tried several times but no way.
I can connect IPAD , Samsung Smart tv , Denon network radio and toshiba laptop but not my inspiron laptop. I think my WLAN can not get th WAP4410N IP address !
I repartitioned my hard drive and reloaded Windows XP. Now my Vostro 1710 laptop isn't finding my 1395 wireless mini-card.
View 7 Replies View RelatedI got a Studio 1535 Laptop which comes with a Broadcom WiFi card that is named "Dell Wireless 1397 WLAN Mini-Card" in the Hardware Manager.
I tried to connect to my ZyXel WiFi router but though i had it all configured right, Windows would always come up with "you entered the wrong key". After playin around for some time i figured out that everything just works fine when i switched my router from WPA-PSK to WPA2-PSK. My router features both WPA-PSK and WPA2-PSK but since my other PC does only support WPA-PSK the router is set to that and i want it to stay that way. I just don't want to buy new hardware for all my other computers.
So is this WiFi card strictly incompatible with WPA-PSK? Does'nt make any sense to me because WPA2 works just fine! Normally they are downwards compatible aren't they? (Moreover, when setting up a connection i can choose WPA-PSK from the dropdown menu.
For the past few weeks, I have been having trouble maintaining a steady wireless internet connection. I intermittently lose the connection or the strength of the connection fluctuates. I have an Inspiron 1521, with a Dell Wireless 1390 Wlan Mini-Card. Also, I am running Windows 7.
A couple of hours ago, I suddenly lost my wireless connection and could not reestablish it. I ran the diagnostic tool, which reported that there was a hardware or driver-related problem with my 1390 mini-card. Now, when I go into Device Manager, it has an exclamation point next to it and it says "This device cannot start (Code 10)".
I have restarted my system and downloaded and installed this driver URL . Device Manager now says, "Windows has determined the driver software for your device is up to date," but there is still a Code 10 error.
Does this just mean that the card needs to be replaced? I am not sure what to do now -
find a Driver for the NIC for windows 8 64 bit Pro. I have a Dell Latitude E6410 and the driver from Microsoft worked for the most part but I was having issues connecting to my Windows phone 8 device (Nokia 920). First I though it was my phone but when I tried other devices like my Surface I could connect with no problem. I am also running Windows 7 32 bit, when I boot up that OS I had no issues connecting to my phone. I also had issues with stable connections to my 5Ghz Wi-Fi access point. Well if any of these symptoms sound like something that you been going through then check this driver out. I used the 43224AGN 802.11 a/b/g/n 2x2 driver and now everything seems to work.
View 2 Replies View Related