Linksys Ae2500 - Everything Connects To Wifi But Pc?
Sep 3, 2012
I recently moved into a new apartment and after receiving the code to the wifi that is included I started connecting all my devices. My Xbox 360 connected flawlessly. But my PC simply will not connect, I am running Windows 7 64bit with a Linksys AE2500 wireless adapter.
Quick note: I have checked that IPv4/IPv6 are set to automatically set to obtain IP Addressees and the DNS Server.
View 19 Replies
ADVERTISEMENT
Jul 13, 2012
I have a router attached to my Dell desktop running Windows 7 and am trying to install the AE2500. Instead of using the router, I want the AE-2500 to access my HotSpot wifi on my cell phone. I go through the AE2500 installation and Device Manager shows it is installed properly. However, I do not see the adapter in my list of available wireless connections and I'm unabley to disconnect my router connection. I keep clicking disconnect but it never does.
View 1 Replies
View Related
Jun 12, 2012
I have an old XP laptop which is now used for my wife on her embroidery machine and have tried to integrate it into the home wifi. The other three PC's/laptops all have win7. Is the XP not compatible? It sees and connects to the wifi with full strength, but I cannot access internet at all.
View 1 Replies
View Related
Sep 20, 2011
I decided to get rid of my wifi and go straight LAN wired internet connection to PC. The wifi connected fine, but when i plugged in LAN wired connection windows 7 does not detect connection. I searched through control menu and nothing. When connected to Asus Z68 motherboard orange steady light turns on motherboard. Also connected same wire to laptop via lan and windows 7 connects automatically.
View 9 Replies
View Related
May 31, 2012
I bought a new Linksys AE2500 dual-band wireless-N USB adapter but I misplaced the setup disc. Is there any way I can get another disc or download the setup files and then transfer them to my other computer?
View 1 Replies
View Related
Apr 16, 2012
I have a Cisco Linksys AE2500 wireless adapter and a Cisco Linksys e2500 wireless router.
For the most part I seem to be able to connect to the internet with no problem. But whenever I stream video to my PS3, my phone, Kindle or when I start using a lot of bandwidth my internet drops and I get the "limited access" message with the yellow <!> symbol. It still shows full bars and excellent connection, yet cant get onto the internet?This happened with my PC at my old house, I forget was I did to fix it though? If it matters though I can connect fine to the internet from my Laptop and my other devices.
View 14 Replies
View Related
Oct 12, 2011
I've recently bought an AE2500 wireless adapter, and I've had problems setting it up, I've checked my port drivers versions and they're all up to date, I have looked over countless websites figuring out why it is doing this, my computer is a Windows Vista, and my last resort is formatting the computer, I've been here for countless hours trying to get this to work, when I run the disk with the adapter, it gets stuck at "Detecting Adapter" and ends up coming up with "Cannot find wireless adapter" or something really close to that. I've tried switching it to all of my USB ports, and nothing is working!
View 5 Replies
View Related
Oct 12, 2011
I have a tivo series 2 unit. I have a linksys routert E2500. Can I use an AE2500 wireless adaper with my Tivo?
View 1 Replies
View Related
Mar 29, 2013
What i have to download and where to download some kind of program that will allow me to run/install this on my MAC. Model: AE2500
View 1 Replies
View Related
Apr 30, 2013
I just moved an older Windows XP Desktop /w Service Pack 3 from my parent's house over to mine after having my laptop fail on me. It was previously connected wirelessly at their house with a Microsoft MN-510 wireless adapter. When I got it up and running at my house, it was not picking up any networks with the MN-510. So I picked up a new AE2500 today, thinking that the ancient MN-510 may be the problem. Plugged it in, threw in the disc and voila, it started picking up Networks. The problem is, It is not connecting to my Network. The router is a Motorola SBG901. I have already disabled the security on the router and made sure that the MAC Filtering is disabled, but it is still not connecting. There has been no other issues with connecting any of our other devices.
View 2 Replies
View Related
Aug 7, 2011
Yesterday I bought a linksys AE2500 usb network adapter. So I set it up on the computer downstairs from the router, roughly 30 ft distance. There is a desktop running a linksys pci card directly next to it. So I fire the computer up it see's the network but it won't connect to it. Then I take the computer up to the room the router is in and it connects. The range on the adapter says 300 ft and I do realize that there are walls and other obstructions that cause that number to fall but I find it hard to believe that the adapter is out of range but I can't think of anything else to explain it.
View 7 Replies
View Related
Oct 26, 2012
A couple weeks ago my HP laptop stopped working. It would not boot and I had to put in the recovery discs to get it working again. Before this the laptop had connected fine to my home wifi secured with WPA2-PSK[AES]. After this problem tho it refuses to connect while it is secured. When not secure it functions fine and I am currently using it to type this post. I would have no problem continuing to use the wifi unsecured but another member of my household works with confidential medical information from home and is worried about the lack of security. I have attempted the trouble shooting tips on the support website already. My computer model is HP G60-235DX and the router is a Netgear N300 model WNR2000v3[CODE]
View 4 Replies
View Related
Aug 14, 2011
I have an adsl router and windows 7 ultimate. The connction status sometimes show's limited connectivity when I click on disconnect and connect again it prompts for troubleshoot connectivity problem, on clicking this it runs a few checks and brings up a window saying connectivity has been fixed and then my internet work's fine. This problem sometimes does not occur all the time. Sometimes after i switch on the router and then the wifi switch it connects just fine.
View 1 Replies
View Related
Dec 30, 2012
I have a home network using WEP 128-bit router and my phone is Motorola Atrix with AT&T. until I did the jellybean update to android my phone connected automatically with my home wifi but now it won't connect at all. In all other placed with wifi or hotspots it connects automatically and even with secure networks it saves the password and stays connected. I tried my local AT&T store and they said all my settings in the phone were right and suggested I reboot my router which I did. Nothing has corrected the problem. The wifi doesn't stay on long enough for me to put in my password to connect.
View 2 Replies
View Related
Sep 17, 2011
My MacBook works fine with my linksys router and RR internet. My wife's toshiba laptop running vista establishes a connection, but will not browse the net. My neighbor says she's having the same problem with her PC when trying to connect to my router (we live very close together).
View 3 Replies
View Related
Mar 18, 2013
I'm starting this thread because I can't get my new Linksys AE2500 wireless use adapter to connect to my new Linksys X2000 ADSL modem. I purchased both of these devices because my old 2wire modem kept dropping the wifi signal and I had to keep turning off and on the modem in order to get the wifi signal back. Now my problem is that I can't connect my AE2500 adapter to the x2000 modem at all, heck I can't connect any wifi enabled device to the modem even though the SSID and password is correct. The adapter finds the network but it can't connect to it at all. The x2000 modem works perfectly since I can use the internet if I connect my computer to it via Ethernet cable but unfortunately I have my desktop in my room and the modem is in the living room so connecting using an Ethernet cable really isn't an option. I tried using my old 2wire modem to see if it would connect to that modem and it did as a matter of fact and the speeds were good but as of late, the speeds have been horrible and the signal drops every few minutes. I get 1 bar in the network status and speed of 1.0 Mbps. Here is a picture for reference:
The problem only persists when using wifi though because when connected to the 2wire modem, the speeds are fast. Range isn't really a problem because im like 10 feet away from the router so I'm not sure what's causing that problem. I assume it's the modem being that its about 7 years old so I would really like to get my x2000 working to see if it's better than my old 2 wire. I'm currently connected to my old 2wire modem via my AE2500 wireless usb adapter as that's the only way I can use the internet.Here's my info:
[code]....
View 4 Replies
View Related
Aug 7, 2011
A few weeks ago, I bought a Linksys AE2500 wireless adapter, and it's worked fine up until a few days ago. A few days ago, when I turned on my computer, I could not connect to the internet. I've tried uninstalling and reinstalling the drivers, but I am denied every time; the message I get is "A device attached to the system is not functioning".I've tried connecting to the internet with my other wireless box I used prior to getting the AE2500 and I cannot connect with that, either. The only way I can connect on this computer is with an ethernet cable.
View 12 Replies
View Related
Apr 15, 2012
I have a Cisco Linksys AE2500 wireless adapter and a Cisco Linksys e2500 wireless router. For the most part I seem to be able to connect to the internet with no problem. But whenever I stream video. to my PS3, my phone, Kindle or when I start using a lot of bandwidth my internet drops and I get the "limited access" message with the yellow <!> symbol. It still shows full bars and excellent connection, yet cant get onto the internet? This happened with my PC at my old house, I forget was I did to fix it though? If it matters though I can connect fine to the internet from my Laptop and my other devices.
View 8 Replies
View Related
Mar 27, 2012
i am using a Linksys AE2500 and it will randomly disconnect. the bar icon on the bottom right shows a yellow icon over it. running the tool to reconnect does not reconnect me to the internet, i have to reboot my computer.
View 9 Replies
View Related
Mar 17, 2013
How to find the mac address of the AE2500?
View 2 Replies
View Related
May 4, 2012
I have an E1200 and an AE2500 adapter..I cannot get the ae2500 to connect to the router. I have another Belkin adapter that connects just fine but it only has speed up to 150mbps. I want to connect using the other adapter but cannot seem to get it working with this router.
View 5 Replies
View Related
Jul 6, 2011
I recently upgraded my router to the Linksys E4200 and setup a 40MHz connection using Channels 44+48 of the 5Ghz spectrum. This works really well on my wife's Lenovo T420 w/Centrino 2x2 and Windows 7. I get over 100Mbit sustained performing CIFS file transfers from my file server. My SSID for 5Ghz is different from 2.4 so I can easily verify which one I'm connected to.
I wanted to do the same on my laptop which is a bit older (Lenovo T410) and only supported 2.4Ghz. So I bought the new Cisco AE2500 802.11n USB adapter and plugged it into a USB2.0 slot (I believe all slots are USB 2.0 on this laptop). I'm using the latest driver from the Cisco website.
Windows XP reports a connection speed of "300Mbit" just like on the my wife's laptop -- but when I do the same CIFS file transfer my transfer rate is "stuck" at 39mbit download (13% of 300) and for uploads I'm getting 16-17% of 300 (approx 48Mbit).
I've tried fiddling with all manner of advanced settings in the Windows driver for the NIC with no avail. No matter what, it's like I'm capped at exactly 39 Mbit.
I tried reviewing the specs of the AE2500 and it says it has two antenna's per band. I assumed this meant it was 2x2? Is this not the case. Is it 1x1? Could this explain it? Or, does it matter which 5Ghz channels I use -- from the AE2500 spec sheet it seemed like it might not support all 5Ghz frequencies?
While 39Mbit is better than the 17-20Mbit I was getting on 802.11g, given how well my wife's laptop works using the Intel NIC it seems something is lacking with the AE2500 or its driver.
View 5 Replies
View Related
Jan 8, 2012
I have tried numerous times to install the disk and the adapter, but it always says it cannot locate the adapter. I know that the ports (I have tried them all) are working properly because they have been in use. I tried the chat. He suggested I call the 1-800 number. I don't have time to wait on hold forever, which I did anyway until I finally hung up.
View 5 Replies
View Related
Apr 27, 2012
Are thay both the same hardware?what's the difference ?
View 1 Replies
View Related
Sep 12, 2011
what is the difference between LINKSYS ADAPTER WGA600N VS AE2500? for upgrade the ghz of my playstation 3 to 5ghz...
View 6 Replies
View Related
Jul 13, 2011
difference between AE1000 and AE2500. Is this difference only usb base station?
View 4 Replies
View Related
Jan 10, 2012
I have a two year old Toshiba laptop that no longer connects to the internet either via ethernet cord plugged into the laptop nor my home wireless network. I have disabled the firewalls and the problem continues. The Network Connection screen shows the computer connected locally but not no internet connection. The laptop is running Windows Vista.
View 3 Replies
View Related
Jun 9, 2011
I am working on an Acer netbook One series ZG5. The issue is that it will not connect to a wireless network if any of the security authentication protocals are activative. It will connect and operate fine via the hardwired RJ45 ethiernet connection. If I set the network up on the wireless router to an open network I can connect to it just fine. I have no issues opening IE8 when connected to an unsecured network. This box did work until I was reimiaging an desktop that had issues and used a usb thumb drive to store files from the desktop to the netbook prior to wiping the desktop.
View 14 Replies
View Related
Aug 23, 2012
I have a Lenovo G570 model 4334(i3) and it is connecting to my wireless network but has no internet connection ( an alert sign on signal bars appears). I tried turning off, reseting my router and nothing happens. Also, a desktop(direct connection), a laptop and my Galaxy SII connect to wifi without a problem.
View 3 Replies
View Related
Jan 14, 2012
I have purchased a couple network usb adapters (Netgear N-300 and Linksys AE2500) and both work fine surfing the internet but when I try to play World of Warcraft the wifi loses connection to the router and I lose all internet capabilities on my computer. My friends computer is still able to use the internet though.
View 1 Replies
View Related
Dec 30, 2012
I have 3 computers all running Windows 7 64bit. I had to move my desktop computer to a different room with no ethernet connection so I purchased a Linksys AE2500 usb wireless adapter for it. My router/modem is a Actiontec 2000 which came with my internet. When I have my desktop on and connected to the internet it slows down all the computers on the network and it is really slow. My question is do I have something installed wrong? I used the driver for teh adapter from this site and nothing else has changed.
View 2 Replies
View Related
May 8, 2012
I can't connect on my 2500 on my xp system. I just wiped the drive and did a fresh install on everything due to a virus. I updated xp/ and drivers and installed the ae2500 drivers. When I try to log on it starts to and shows connected however, it tells me "windows was unable to find a certificate to log you on to the network" I noticed that this system has the same ae2500 with windows vista and uses wpa2-personal, aes. The xp system only has options for wpa-personal, aes. Is this the problem or is it something else?
View 1 Replies
View Related
Apr 4, 2013
desktop with Windows 7. It is connected to the internet in my office thru Uverse (AT&T). We previously had a standard router, but upgraded since it seemed to be moving too slow. This problem with the adapter existed then also and we thought maybe it was too many computers slowing down the router.The adapter works great until I try to open certain websites. Then it loses its mind. I get a popup that says "Dial Up Connection" and wants me to choose to connect or work offline. When I click connect, I get a second window that says "Connecting through WAN Miniport", but it never actually connects to the page. Then lastly, a third popup says it has an error connecting and wants to redial and starts a countdown. But again, it never connects to the page.
View 3 Replies
View Related