I have tried renewing my ip address from the cmd prompt i have tried ipconfig/release, ipconfig/flushdns,ipconfig/renew and it didnt work my connection still keeps on going back to limited or no connectivity my DHCP is connected and i have default gateway ip i can get good connectivity if i reset the router by unplugging it but it still goes back?
View 19 RepliesI keep getting this pop up message that says "local area network limited or no connectivity". It appears every 20-30 seconds and drops my internet connection. When I click on the message and opens up the connection box, it states it's functioning properly.
View 6 Replies View RelatedI am having a problem trying to connect my wireless usb lan adapter to the internet. i checked my networks and i noticed that it said that i had Limited Connectivity (sometimes when i fool around with it, it switches to Local Only). i also have a wireless router (EH-100) on a separate network. that router's network, on the other hand, has no problems and it says that the network is Local and Internet. i really want to use my wireless usb lan adapter to connect my DSi to the internet. my ds recognizes the signal but because the adapter is on a Limited Connectivity network, it cant connect to the internet. [code]
View 12 Replies View RelatedI have an Acer Aspire 5315 running windows vista home basic, version 6002.For some time i have not been able to join wireless networks, but used a long ethernet cable to my room in shared house. yesterday we got a new router and have had to use it wirelessly. it is a talk talk D-Link DSL 2780, and al other housemates are on wirelessly. mine links up (sometimes) but says local only or limited connectivity - both of which mean i cannot connect to the net wirelessly.
View 3 Replies View RelatedI had a tech from Comcast come out but couldn't figure it out. The tech said it could be my router but tried a different one and still nothing. The network, for me, is listed as "Unidentified" and the connection switches between Local Only and Limited Connectivity. It also says I am connected to my network with excellent strength. If I plug the router directly into the laptop it still doesnt work.
View 10 Replies View Relatedi have factory reset my Toshiba laptop un clicked ipv6 but a setting in vista only gives me local or limited connectivity and im unable to access the internet and my other Toshiba laptop allows me full access along with my phone allows full access to the wireless network therefore tells me the router is not the cause?
View 1 Replies View RelatedThe wireless Internet at home is not working on my laptop anymore. It's working fine on my mobile as well as with other wireless networks at school for example. No matter what browser I use I usually dont get to any website. Most of the time it says access: local only, or local and internet, or limited connectivity. If I'm lucky at the right time I can open a website but then it's gone again.
View 13 Replies View RelatedI've just recently bought a second hand Acire laptop is v.good condition, it does everything fine apart from connect via wireless.I have another laptop which can connect on it's wireless and the Acer laptop can get a connection if you use a network cable directly to the router.I have a Sky phone & Broadband package.
Working Laptop (XP) -IP config All -
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:Documents and SettingsAdministrator>ipconfig /all
[code]....
I have a Dell desktop with Windows XP Home Edition. I recently restored the computer to factory settings and when I tried connecting to the internet the Local Area Connection wasn't showing in My Network Places. I have been searching through other forums and tried the things that they suggested but nothing worked. I am trying to connect to an AT&T U-verse 2Wire router through a wired connection. I tried connecting both wirelessly and wired to another computer and everything worked fine. I checked the Device Manager and there is an ! mark next to the Ethernet Controller. The properties say that the drivers for that device aren't installed. And of course I can't install them since I can't access the internet. Other forums suggested that I check the network adapters option in Device Manager but that isn't available in the device manager.
View 3 Replies View RelatedMy error message states that "Windows could not finish repairing the problem because the following action cannot be completed: Registering with DNS".I have no internet connection on my HP PC, which is why I am typing this on my laptop.On the HP I am running windows xp with sp3.I connect to a cable modem provide by Time Warner.This problem started yesterday, so I have been utilizing both computers with one internet connection, or plugging and unplugging the cat5 cable.I have run Microsoft Essential Full scan, as well as Malwarebytes's Anti-malware.Now I ran both of those in Safe mode, and picked up no bugs. I have Avast as my antivirus software, and the message I receive on that is that "Avast will not be able tp protect mail/news (error 10050). I am unable to turn on the web shields for Avast.I have manually entered the IP addresses into my HP from my laptop, all the way thru DNS servers.It still won't connect.I tried using the Internet explorer diagnostic tool, and it came back and said that I have a winsock issue.
View 14 Replies View Related1. Internet works ok, everything is fine, but then it stops working for no reason.
2. I open Network and Sharing Center, and do diagnostics. They come up with result: "the default gateway is not available". Nothing works. But Local Area Connection and Network Controller are both enabled.
3. I have to restart computer for the internet to work again. However, it doesn't restart: it hangs forever in "shutting down" screen, and nothing happens. Probably because computer is still trying to connect to the internet (?)
4. After forced restart, internet doesn't work, but if I run diagnostics again, they come up with result: "The Local Area Connection adapter is disabled", and fixes it automatically. Internet works then.
My internet is working fine, but my Ethernet cannot get a connection. On my Ethernet Local Area Connection it says status is: Limited or no connectivity i am running an Ethernet cable from my xbox 360 to the Ethernet adapter slot at the back of my computer, no wireless or anything. And as i say the internet works fine though i cant get any connectivity out of the Ethernet adapter.This used to work fine two weeks ago, now it refuses to work i recently moved and so i disconnected my pc nothing broke and all it did was sit around in a safe place before the move EVERYTHING worked fine, On my xbox the display says:Network adapter - wired IP address - failed?i'm running windows xp sp 2?
View 1 Replies View RelatedI got a new CPU but after 3-4 months I use it, my local area connection is gone.It cannot detect the internet. I use Acer Aspire M1800. OS is Vista.Also, I get error 0x800706ba
View 14 Replies View RelatedI wasn't able to connect to my modem's Ethernet for a month, before that, i was able to use my Ethernet when connected to PC, but when i threw it away, i tried many time to connect to my modem' Ethernet but all the attempts were a failier.......Is it because of the cable that i must connect or is it the com or modem that is wrong?
View 1 Replies View RelatedI have xp pro sp3 i also connect thru fios since i restarted my computer last evening i can't connect this computer was put together for me so no original disks under network connections there is no lan connection can't use system restore tried ipconfig but says internal error and thats all when i try safe mode i see all of the network adapters but i don't see it in regular boot.
View 3 Replies View RelatedI am having this same issue. Except under Network Adapters, I don't have a yellow question mark. I have a amd Athlon(tm) 64x2 dual core processor and operate with windows XP professional service pack 2. my other computer (this pc im using) i have no problem with the connection I can to the the Internet
View 2 Replies View Related-No hardware profiles on "change adapter setting."-Network Adapter isn't shown in Device Manager.-Reinstalled windows 7 and problem still persist.
View 4 Replies View Relatedhow to increase local area conection speed 10mbps to 100mbps?
View 2 Replies View RelatedMy internet is working fine, but my Ethernet cannot get a connection. On my Ethernet Local Area Connection it says status is: Limited or no connectivity i am running an Ethernet cable from my xbox 360 to the Ethernet adapter slot at the back of my computer, no wireless or anything. And as i say the internet works fine though i cant get any connectivity out of the Ethernet adapter.This used to work fine two weeks ago, now it refuses to work i recently moved and so i disconnected my pc nothing broke and all it did was sit around in a safe place so happened before the move EVERYTHING worked fine On my xbox the display says:Network adapter - wired IP address - failed Im sooo so confused with what to do now, anyone got any suggestions?
View 20 Replies View RelatedMy laptop (win7) can connect to wireless, but not Local Area Connection.This is the capture of my device manager, it reported that the driver of ip6 failure.but I do not think ip6 relates.I tried configuring a static IP address, reinstalling network driver, or disabling and enabling network cards.
View 11 Replies View Relatedhowdy,im having trouble with my LAC.it just keeps identifying.i have tried everything,uninstall/reinstall, netsh winsock reset,netsh int ip reset,disable/enable.windows diagnostics comes back with invalid ip address,and modem hardware failure.device manager lists the network adapter as working,yet it doesn't here's my ipconfig[CODE]
View 5 Replies View RelatedI've tried most solutions online that I can find with similar problems, but to no avail. I'm using Windows 7 (64 bit), by the way.
Here's a copy of my "ipconfig /all" :
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:Windowssystem32>ipconfig /all
[Code].....
I got a used computer from my relatives. When i enable my local area connection then it says aqcuiring ip adress for a while. Eventually it stops trying and says network cable unplugged. It worked fine at my relatives place, but not at my place.
View 14 Replies View RelatedI cant find the local area connection in (change adapter settings).
View 1 Replies View Relatedhow to show a local area connection icon if its disappear, and if its say as a past item in customize notification
View 1 Replies View RelatedMy computer is not connected to the local area connection.even though the network cable is plugin.
View 1 Replies View RelatedI've been trying to set my IP to a static IP so I can host servers for a few different games and every time I change the IPV4 settings my internet stops working and when I troubleshoot it says "DHCP Not enabled for local area connection.".
View 5 Replies View RelatedI am trying to set up a wifi hotspot with my wireless adaptor. The connection between my ipod and the wireless adaptor in my computer seems to be working fine, but it doesn't connect further to the local area connection (ethernet).I tried to bridge the two networks but it doesn't work I get the error message "An unexpected error occurred while configuring the network bridge"[CODE]
View 4 Replies View RelatedMY laptop has a X in local area connection
View 2 Replies View RelatedI am using an ethernet cable to connect my desktop to a Linksys router but I am getting the following message "Local Area Connection" doesn't have a valid ip configuration.I have connected to other routers so I do not believe that the card is at fault.So far I have tried the following:
Swapping ethernet cables
Connecting to router
connecting to modem
power cycling router/modem/computer
downloading new driver
[code]....
my computer is custom made and it has been running just fine until recently. Usually when turn on my computer and login, my computer is connect to the internet. However recently I have not been able to connect with the local area connection and i'm currently on wireless connection. When i'm not using wireless my internet doesn't connect and I can't check my router by typing 192.168.1.1. I have a Linksys WRT54G and i'm using Vista SP2. I don't like using wireless at all and I want my connection to go back to normal[CODE]
View 9 Replies View RelatedI decided to connect my PC to the router VIA Ethernet cable because I got this really long ethernet cable and the router is pretty far so the signal is weak and I want to fix that, so It used to work before until I formatted my PC, now when I go into the internet drivers I do not see any Local Area Connection driver that I can enable.
View 11 Replies View RelatedI recently hooked my computer back up after moving and the Internet is not working. After going through the troubleshooting steps it gives the message local area connection does not have valid ip configuration. I have a net gear router and the wifi works fine on my phone and laptop.
View 1 Replies View Related