I got ADSL 2.0Mbps internet service, which it's supposed to be fast however my browsing speed is very slow, and my download speed very good and i have this problem with more than one pc and using different OS ( Windows 7 & ubuntu[linux]) so its not a virus issue or a LAN drive issue , and i tried to use different DNS but nothing change.
View 16 Repliesmy internet is being slow. It 'uplink' speed is 7mbps. when downloading or just surfing the internet 'task manager' says that the computer is using below 5% of the internet's speed capasity. it never gets higher than this, is there any way to change this so that i can us the full potential of the internets speed.
View 1 Replies View RelatedSlow browser speed on all browsers, but the downloading and uploading speed are normal according to speedtest.net. Ping is a bit high. Other computers in the house are fine.Already contacted ISP (Time Warner), modem is not the problem Contacted Linksys router support, router is fine. anti virus plus malware byte.
[code]...
I am having trouble loading pages in a browser (IE, Firefox, Chrome, makes no difference). My network is on a 101.140.228.x ip scheme because that's what the wireless network is set too and we can't change that. (It's built into the hub and the manufacturer doesn't let us change it. The computer I am having trouble with is cabled into a Netgear Access Point in client mode. The Access Point is working basically like an oversized network card to pick up the wireless network across the field with the 101.140.x.x ip.
View 3 Replies View RelatedI aquired an 1841 recently from work. I am trying to use it as my home router. I have set it up with the very basics (dhcp wan, dhcp pool for lan, nat). It is grabbing an address from Comcast. It works, ran speedtest and the speed looks fine at 25/3 or so.
The problem is when I am surfing the net. I'll go to a site like Youtube. It will take forever to load the site, never play the video. I have tried other sites, Autoblog, Break, etc. It seems like anything with a lot of multimedia. If I go to MSN, the first time it will take about 10 seconds to load all the pictures, after that it is instant (probably cached).
Then, if I wait a few minutes, go back to the same site, sometimes it'll be just as slow, sometimes it'll work fine. I have checked a few of the cisco logs and it doesn't show any drops or errors that I can see. If I run a constant ping to something like google.com while it is slow loading, the response time remains normal around 25ms.
I set up my other d-link home router and it works fine with all sites, same speeds from speedtest. I tried plugging a computer directly into the Cisco and same slowness issues.
I have an 1841 running Advanced Security IOS (12.4(25) I think, have to check when I get home) that I'm using to learn about CBAC and IOS' firewall functionality. Its external interface is connected to my Windstream DSL modem in bridge mode, and the router is doing the PPPoE authentication. It's also doing NAT for my internal network, and is acting as a firewall using CBAC inspect statements and ACLs.
Everything is working at at least a baseline level: the DSL authenticates and connects, and machines on the inside can browse the web. The problem is that browsing to some sites is slow or times out. Not all sites, just some. Latency seems to be okay when doing pings. The problem seems to happen with https connections, but again, not all of them. Gmail works fine (I have it set to always use https), while my bank and credit card sites either time out or take minutes to load.
I have an "inspect https" line in my config, and have allowed https through my outbound ACL.
I'm looking for next steps for troubleshooting this. I've check CPU utilization and it's very low; not sure what else it could be. I only have a few inspect statements, for the common stuff: tcp, udp, icmp, pop3, imap, dns, tftp, ftp, and ntp.
I am trying to troubleshoot an issue on our network that is resulting in extremely slow internet browsing. I have found out that the first request in a ping always timesout. Also, having the same issue with running a tracert. I have included some screenshots
View 7 Replies View Relatedi recently had a RAID Z setup on Solaris 10 (oracle) which worked fine until my motherboard gave out (computer would boot fine and work OK and then shut down ~ 20 min later). So I replaced the motherboard (ASUS E35M1-I Fusion AMD E-350 APU) but solaris would not install so I put in OPENINDIANA (build 151). I installed Samba and used my old smb.conf file (below). I can view the share from my win 7 machine, and the transfer speeds look good (I can stream an HD movie fine).The problem is that for browsing pictures every 10 pictures or so the viewer or browser stalls for 30 sec - 1 min before it is able to load the next picture. It also happens when I browse to different directories.
# Samba config file created using SWAT
# from 192.168.0.192 (192.168.0.192)
# Date: 2011/07/30 18:01:43
[global]
socket options = TCP_NODELAY SO_KEEPALIVE IPTOS_LOWDELAY
[code]....
how to increase download and browsing speed using dial up connection using nokia mobile phone as a modem
View 2 Replies View RelatedI have a 2 mbps connection and i mainly use it for gaming such as World Of Warcraft, Call Of Duty: Black Ops, Battlefield BC2 and my pingms is normally around 70-150 but yesterday during a game and all of a sudden it said "Connection Interrupted" then the game resumed with 350 ping and since then my ping in all games increased to at least 400. I called my ISP but they said as long as the download speed and browsing speed is normal they cannot identify the problem, i have been having it for 2 days now wasting my warcraft subscription : however not sure if this willere is a tracert from the server i play on[CODE]
View 12 Replies View RelatedTurn SPI under (Advanced/Firewall) off (uncheck the box).
I was getting slow page loading on Google Chrome and I think IE but don't remember for sure.
Once I unchecked the box for SPI, pages loaded much faster and I didn't have to double-click on links.
On my laptop I have intermittant problems printing to my wireless printer due to slow speeds and timiming out, also loading online pages seems very slow.I have 2 of these fujitsu laptops and they both behave roughly the same.
Intel Pro/wireless 3945ABG
driver 10.1.1.7
I have not updated it, and not sure if it should come from fujitsu or intel anyway setting on network adapter:power management - default - based on computer preformance (I tried changing to highest-did not work)transmit power - default- highest power setting (cannot change for some reason)this is from this laptop.
wired speed is 13M down 0.81 up,
wirelss varies from 1-1.7M 0.78 -0.8 up
I have a 15M package.I downloaded Xirrus, attaching the screenshot. My network is highlighted.here are some of what I can find:
Speedtest
Wired down 13.2M up 0.81 ping 10ms
wirless down (varies)1-1.7M up 0.78 ping 26-104ms
Dlink DVA-G3810BN/TL
setting:
802.11bg mixed
WPA/AES
[code]....
I am using a Thomson ST516 v6 DSL Modem, through which I have connected a Tenda W311R+ Wireless Router. There's two laptops, one running Windows 7 Sp1, the other running Windows Xp Sp3, and an Android based phone using this connection. I should mention that the problematic laptop had Windows 7 before switching to Xp and ran without any issues.
[code]....
I am sharign my bandwidth with my neighbour and would like to keep a tab on what he is downloading, and then limit the speeds he gets while using my 4Mbps line. He's accessign using a WIFI L:AN card.Can I do this usign WRT160Nv2? Maybe any third-party.
View 2 Replies View RelatedI had recently upgraded my computer, which currently looks like this:
CPU: i5 3570
MOBO: Gigabyte GA-Z77M-D3H-MVP
RAM: G.Skill 16GB DDR3 1600MHz
HDD: Seagate ST1000DM003 1TB Barracuda + Seagate 320GB Barracuda
GFX: Sapphire HD4850 512MB Dual Slot Fan
PSU: OCZ StealthXtream 500W
(The bits in bold were the upgraded parts, up from an AMD Athlon64X2 6000+)
For some really strange reason, my web browsing has been ridiculously slow, with the words "Waiting for [website]" always showing up in the bottom corner of Chrome for a good 10-20 seconds before the website loads. This happens to every website I visit, bar Facebook (secret Facebook virus?). It's especially bad on shopping websites such as eBay, taking upwards of a minute to load pages. I have tried Internet Explorer and the same thing is happening.
My downloads, on the other hand, have been unaffected by the upgrade, with download speeds averaging 800KB/s.
If it matters, my current modem/router is a D-LINK DSL-G604T; my other devices work perfectly fine on this modem, with browsing speeds being faster on my 2G iPod Touch than my desktop computer.
I currently use Avira Internet Security 2012 as my anti-virus.
I also use these extensions in Chrome (if it matters):
4chan Plus 2.5.5
Adblock Plus (Beta) 1.2
LastModified 1.1.2
Neater Bookmarks 0.9.4
PhotoZoom for Facebook 1.1208.30.1
Session Buddy 3.0.16
Xmarks Bookmark Sync 1.0.22
Youtube Ratings preview 2.0
I have tried disabling all add-ons and the speed is still the same
In the middle of writing this, I decided to download Firefox, which has improved on my browsing speed somewhat, but still has hiccups here and there (Facebook takes forever to load in Firefox). But having been a Chrome user for a long time, I would like to stick with it.
I get the following error whne enabling 802.11a network on a AIR-WLC2106-K9. Country is set to ID (Indonesia),>config 802.11a enable network802.11a network not supported for this Country CodeYet, on a AIR-CT2504-K9, set to same country code there is no problem. Is this a WLC model or version issue? WLC2106 is on version 6.0.199.4 while the CT2504 is 7.0.220.0
View 3 Replies View RelatedI have a Arris DLS with 12 Mbps Download and when I Connect my laptop directly I get the same speed as 12 Mbps but when I do the speed test with my linksys I get only 5 Mbps. How to upgrade to the new WRT54GL or WRT54GS?
View 1 Replies View RelatedRecently my desktop has experienced very slow download speeds (~0.11 Mbps), however the upload speed appears to be in line (~2.0Mbps). These numbers are taken from Comcast's speed test (my ISP). It is obviously a problem with my PC because everything else on the network (PS3, Laptop) have great signals with no problems. I just recently reverted the Desktop back to its factory state, and everything was working fine for a couple of months. The desktop in question uses Vista 32-bit and the Belkin Basic USB Wireless Adapter.
View 1 Replies View RelatedI live in the tampa bay area, I have bright house (BHN) as my service provider, which provides a Road Runner Lightning (40/5) package. I previously used BHN's top tier (20/2) back in July (and prior) with no problems.
After converting to Lightning in August of this year (2010). Of course, BHN (and every other provider) wants to force a modem/router down your throat, so I had them bridge it (in short, turn it into a dummy modem with no routing). I had an SMC branded modem gateway at the time. I work from home 2 days a week (so I can spend more time with my kids during morning, lunch, right after work) and this requires me to use QoS to ensure my VOIP work calls don't get dropped, if the family is watching youtube videos or watching netflex.
My network was as follows SMC Modem >WAN IP>>WAN Port>>D-link DIR-655>>Switch Ports>PC1, PC2, PC3
Everything seemed fine (from a usability stand point) till about 2 weeks ago when my upload speed seemed to grind to halt. Normally I was able to upload about 200-300K per second, and I noticed this dropped to about 45K per second during a drop box upload. First thing I did was power cycle both my modem and router (in the proper/usual order). After they both come up, I start using speed test to find out what my upload speeds were. I was getting about 39Mbps down, but only .56Mbps up still. I factory reset my router.... test, similar speeds. Power cycle all computers (just in case), and then modem/router. Tested, similar speeds. Updated the firmware to the latest. Same issue
Called BHN customer service, they factor reset it, but it wasn't in bridge mode. If I by passed the 655, in factory mode (non bridge mode) upload speeds returned to better than expected states. If I bridged the cable modem, upload speeds seemed to crash.
Had BHN replace the modem, seemed fixed for a day, then issue came back. Had them come back out and replace it again, this time with a Motorolla Surfboard modem... same issue. Fine during factory reset, however after they bridge the modem, upload speeds were fine. Told BHN I would take it from there.. Connected up the DIR-655, and upload speeds crashed again. (.6Mbps). Called D-Link Support, and the Chinese English speaking rep seemed to not be listening to me and tried to have me adjust my MTU as well as Wireless settings. Long story short... the rep was a level 0 id10t and I hope D-link will consider hiring better employees/contractors. So I was all about to give up and replace it with a DD-WRT capable router (which it takes me a lot to want to swap hardware), when I discovered the wan shaping was on. Which I thought to myself... nah... QoS has never messed up before... why would it be the cause. Turned off wan shapping... and voila. Issue seemed to be insta-resolved.
Unsatisfied with that... I decided to dig a lil deeper. I turned on Wan shaping again, but decided to set the settings manually instead of auto detect.
Here are the settings I used... (Advanced Tab>QoS)
Enable Traffic Shaping - Checked
Automatic Uplink Speed - Unchecked
Manual Uplink Speed - 5000
Connection Type: Cable or Other Broadand Network
Enable QoS Engine - Checked Automatic Classification - unchecked (this checked seemed to affect my upload speed by about 5-10% during testing) Dynamic Fragmentation - unchecked (this checked seemed to be the worse enemy for upload speed)
While I know I'm not any network guru (still have to use a subnet calculator for subnetting), I think I did a pretty good job drilling down the issue (once I got passed my service provider replacing modems).
Anyways, I've had overall good luck with D-Link products, even have a 5 port 10/100 switch (all metal) from 1998 that works great. Hopefully, D-Link will just either put more documentation on the web, or hire better employees.
I have Verizon DSL. Since I've gotten it turned on in my new apartment it's been randomly DCing, I had a tech come out and tell me it was because I'm too far from the central office(thought I'm only a mile from the office?) and I needed to call and get my mbps reduced from 10, to 5. So, I called and did that and I was still having the same issue. Today another tech came out, told me the same thing, but I needed to be reduced to 3, and left. I called and got it reduced again. They said it should be 3-5 and I was at 5-7. So, now my download speed is actually higher than it was when I was 5-7(it was at 3 mbps usually, now it's 5), but my ping has doubled. Pages are taking longer to load, and when I play any games online there's a noticeable delay. I have been DCing less often, but it's still happening.
View 14 Replies View RelatedI rencently built a computer with a friend. The wireless card I had was fast but began to slow down, went from 12 mbps to just under 1. I switched cards because I figured maybe the card was bad. I now have a netis WF 2113 PCIe card. My mom in the room with the router gets 20-30 mbps while I still get <1 to 1 mbps. I've updated the drivers and looked through the net to find a solution, but to no avail.
View 5 Replies View RelatedI ru n the speed test from my desktop and laptop and the download speed are in the same range in both pc's, around 20mb/s. However the upload speed is higher in the laptop (around 4 mb/s) compared the desktop (300 kb/s)My connection is supposed to run at 50 mb/s and 5mb/s?
View 9 Replies View RelatedI was wondering why my upload speed btw the test. and reading this forum post: Sudden slow upload speed?
View 1 Replies View RelatedMy D/Speed or Download Speed is roughly 1.5MB.HOWEVER, when I download something it says I am only downloading 171.5KB/s have a look.Picture of speedtest.net STATING I have 1.42-1.50MB download:
Picture of Steam stating I am Downloading at 160-180KB/s:
Plus, If addition, the fact that this has been going on for over a year, and I haven't gone off and freaked out on my ISP is...
I have a Mac and a PC in my home wireless network. ATT Uverse provides me with 16 MB/s internet access. I use the ATT wireless modem/router.With the Mac my download speed is almost 16 MB/s so everything seems working well.With my PC (WIN XP) the download speed is limited to less than 6 MB/s. I know that there is a way to allow my PC to speed up but I do not know how.
View 3 Replies View RelatedI've got 45mbps internet speed with Windows XP and 0.8 with Windows 7..
View 6 Replies View RelatedWhen I use chrome or firefox or another internetbrowser my internetspeed gets really slow but when i download throught torrents i get my normal speed. My regular internetspeed is 8Mbit/s and now it have slow down to 1,5Mbit/s. I just reformatted the whole computer after hours trying to solve my problem but without any sucsess.
View 4 Replies View Relatedevery devices on my network started having really slow speed. It takes long time for each to navigate thru sites. Normally every device gets around 20-25 MBPS in the network. And i have desktop, laptop, iphone, tablet on the network. I've been trying to fix this for whole day yesterday and today and no luck.how to fix this?.I ran some things from this site and the results are here.
[code]...
is the MAX speed (4.5MB) of 300 Mb router slow for a NAS drive knowing that I am very close to the router?
View 7 Replies View RelatedI've been gaming all day and my ping has been extremely high. I figured it was someone in my house downloading something but now it's... 1 a.m. I checked my whole house and shut down everyone's computers so I'm positive no one is stealing my bandwidth.
View 2 Replies View RelatedRecently bought a Devolo DLAN200 AV Wireless N Starter Kit. Set up as instructed. Took a while to work out my router settings. The kit now works but is extremely slow to download from internet. Wireless signal is fine. But whether I connect to the wireless, or connect to the ethernet port of the Devolo adapter, it is very slow. Via ethernet, I can get to a speed test site, and it shows less than 0.5Mbs. This compares with 6Mbs if I connect to the router's ethernet or wireless. I have tried other settings on my router, including all combinations of channels, but there is no improvement. I have tried other plugpoints around the house, but no difference. Devolo support on the phone was no use.
View 1 Replies View RelatedThis is the first PC I have ever built, but I built it with a buddy who is very experienced and everything went okay. The computer is maybe 3-4 weeks old now, everything is running fine, until today when I decided I wanted to try streaming some Diablo 3.This is when I discovered my upload speed was absolute garbage.I have verizon FIOS - I pay for 15/5, the download speed is always at 20+ mbps, I have never had any problems with it., but my upload speed is fluctuating between .34-1.5 mbps, changing every second.I know this is a problem with the computer because I brought in my old laptop, unplugged the ethernet from my new desktop, plugged it into the laptop in order to keep all variables the same, and it was getting 25/5 without any hesitation.When I was downloading the drivers for my mobo I installed something called Windows Firewall with Advanced Security(maybe that was with a windows update, im not sure).
Specs of my PC (if this matters)
-Asus P8Z77-V LK
-8g ddr3 Ripjaws
-i7 2700k
-Corsair H60
-EVGA GTX 670
-Crucial 128g M4 SSD
-Caviar Blue 1TB HDD
-750W OCZ Modular PSU
I have an old Fujitsu siemens Amilo pa1510 that had an atheros ar5005g (wireless g) card in it.My internet line is 15/2 and the card has always maxed it out, but offcource its been slow on my local network.So I bought an cheap N replacement in the Atheros 5008.After putting it in and having IRQ problems(still ocurs on boot sometimes) I finaly have it working.The problem is just that the speeds wil not reach 15 anymore on internet, it varies between 1.5-7 on down speed tested on speedtest website. is there anyway to fix the problem? im curently using latest driver from atheroz website and running winxp 32.No other settings have been altered, and tried on 2 different routers.
View 5 Replies View Related