Can't Connect Via Static IP But Works Fine Via DHCP
Feb 5, 2011
I am having trouble connecting to the internet, but not my network, when I assign a static IP to my machine. However, when it's set to DHCP, it works just fine.
Pertinent info:
-I'm connecting to a Linksys WRT610N router via a wireless USB adaptor, Netgear WNDA3100v2;
-Service is Time Warner Roadrunner cable;
-There is no IP conflict as I've got DHCP range set from .200-.249 and this machine's static is .100;
-All the other devices in the house are on static starting with .101 up and they all work fine, both wired and wirelessly;
-Can see and connect to all devices in the LAN, including the router, but nothing outside
View 5 Replies
ADVERTISEMENT
Jul 7, 2011
A few days ago i tried logging onto to League of Legends, and my net disconnected. Thinking nothing of it, i reset the router and tried again, to no avail. Then for the last few days i can't get on skype, LoL, or any other program that uses the internet. I can get onto websites and such( using firefox) except i can not load youtube videos, otherwise my internet disconnects for a minute or so.
View 1 Replies
View Related
Jun 7, 2010
Just installed an E3000 in my house. All wired PCs are working fine on the network, and my BlackBerry connects to the wireless signal just fine. I got an AE1000 for my laptop. It installs fine, sees the wireless signals (secure and guest) fine, but it simply won't connect to the E3000 either using the Easy Key I created with the Cisco Connect software or by manually entering the WPA2 passphrase. The WZC window that shows the networks tries to connect and then fails with no error message. Using the Cisco Connect software to do the same task also fails, and after entering the passphrase manually there, the error message is:
Error description: Invalid Key Xml
Model name: AE1000
Operating system: Windows XP SP 3
Software version: 1.1.10049.0
Also, I can find nothing on the laptop since installing the adapter that allows me to switch between the dual bands. Since that was one of the main advertising points for the AE1000, how do you control which band it's using?
View 9 Replies
View Related
May 8, 2011
My broadband works fine on my laptop but my Wi-Fi will not connect,it keep on saying "not connected"
View 3 Replies
View Related
Jan 10, 2013
My WiFi works fine on phones, tablets, and my xbox. The only problem is that it is extremely slow on my two laptops.
View 5 Replies
View Related
Jun 30, 2012
While im playing games like battefield 3 left 4 dead 2 or minecraft i get rubberbanding lag which is basically my game character running foward then being shot back to his original postion. I originally was using a wireless usb adapter so i blamed it for the cause of the lag. (My pings were fine btw) I went to ethernet for a week and the lag went away so everything is fine via ethernet. I just bought a new wireless card but there is still this terrible lag!
View 10 Replies
View Related
Jun 11, 2012
My computer not working probably with a wired connection.I can ping to the problem sites with absolutely no issues.
View 3 Replies
View Related
Dec 19, 2012
Earlier my desktop was to b in d same place where the router was der. Everything worked fine. Now I decided to shift my desktop to another room. I have kept the router at the earlier place only. I have brought a 25m long new cat 5 cable. When I connected it to my desktop, the orange led on ethernet port do not light up and the desktop is unable to detect the ethernet cable and hence the internet connection. On the router, a light of ethernet keeps on blinking every 1 second. I was worried whether my ethernet port got fried. So i inserted another ethernet cable, but then the ethernet orange light came and the pc detedted the connection. Therefore I thought the cable might be faulty. Therefore I connected my laptop with that 25m cable. But my laptop detected it and showed the internet connection. But now when i again connect the cable to my desktop, there's no light and the pc does not detect it. However, if i connect the 25m cable to my desktop then during boot the ethernet light on router is stable just as when it is normally connected to the internet. But when i go into windows it starts blinking every 1 second.
My router is MTNL Model No. UT-304R2
Desktop - Asus P7H55, core i5
Laptop- HP 2000
Windows 7 Ultimate on both desktop and laptop.
View 17 Replies
View Related
Aug 24, 2012
Internet works fine for a few minutes(around 2-5 usually), then it completely stops. It doesn't say it was disconnected, it just stops.Wireless has been working just fine the past few days.) We have used a desktop computer with this type of setup before and it worked just fine, that desktop was like a 2001 Dell that could barely stay on.
View 5 Replies
View Related
Jan 14, 2013
So I have 2 laptops, a win 7 and a win 8,The windows 7 laptop works on the internet fine, but the windows 8 one always disconnects, even when the win 7 isn't on.It disconnects usually when I'm running multiple programs that use the internet on it, but when I run a game like counter-strike, it disconnects too, but not nearly as often.The router is from 2008 or 2009, but it's a tiny aztech one. I'm sure it's not the isp, because like I said, the other laptop works fine.
View 2 Replies
View Related
Jan 14, 2012
So,I'm living in a university campus and I've got an internet connection via a proxy server.The thing is,when ever I plug in the network cable,my PC recognizes the network,but the little network tray says "No internet access". But the curious thing is that the internet actualy works.My browser works,I can access any website (well,except the restricted ones via proxy) but it works just like any other internet connection in the campus. But,recently I've got my hands on a VPN account to have access to things that my proxy wouldn't allow me (torrents for example).But,probably because of that "No internet access" problem,when ever I try to make that VPN account,it tells me that I need to connect to the internet first. I already am,but my PC still keeps requiring an internet connection.I can't manualy connect to it,since I don't have the ISP data required. I've only got my VPN account data (VPN username and password).
This is kind of annoying,since this only happens to me,my other room mates don't have this problem,they plug in their cables,their network adapters recognize both the network and the internet access. Only mine says "No internet access" but the internet works fine.My operating system is genuine,when ever I go home and connect to my home network this problem doesn't ocure anymore,this only happens when I connect to my university's internet connection.I've tried reinstalling my operating system.Still no results.I'll attach a printscreen so you could see exactly what I mean.
View 1 Replies
View Related
Jan 21, 2013
I can follow directions and am fairly tech-savvy, just don't have the time to troubleshoot this stuff and run my business. Here's the rundown:Router:Cisco Linksys E1000 V2
-working fine until I unplugged to move it and plugged it in
-verified with tech support the problem is not physical
-right now, am hardwired to the router, which is hardwired to the cable modem, and connectivity is fine through hardwiring
-no luck through wireless - this is the error message I get:
This webpage is not available:The server at www.google.com can't be found, because the DNS lookup failed. DNS is the network service that translates a website's name to its Internet address. This error is most often caused by having no connection to the Internet or a misconfigured network. It can also be caused by an unresponsive DNS server or a firewall preventing Google Chrome from accessing the network.
View 9 Replies
View Related
Mar 1, 2011
connect new computer running windows 7 to small peer to peer network...modem to connect to interenet is speadstream 5660...network works fine but cannot access internet...i works great in my office with a different modem...i can access the windows 7 computer remotely using go to assist also...trying to find out if there are issues with windows 7 and the speedstream 5660 modem...
View 2 Replies
View Related
Feb 12, 2013
I have a P7H55 Asus Motherboard with the Ethernet port and cable working fine individually. However, when i connect them together,the Ethernet light on the router remains stable as if connected but still the desktop shows not connected. i have installed the drivers which came from the motherboard manufacturer and are the latest.In the Network and Sharing Center, the icon is enabled.It does not show cross sign.
View 1 Replies
View Related
Apr 12, 2012
We have FIOS at our home. All the wall connections for ethernet are wired to the control panel in our house which are then connected to a wired router. We have another wireless router in the upstairs which gets internet through the wall port and it works fine.We had another downstairs wireless router in the living room that was working fine as well, but I reset it for certain reasons and it no longer works properly. All the proper lights light up: internet, port, power but the computer can only connect to the network and not the internet for some reason.
View 9 Replies
View Related
Jan 7, 2013
I am able to access ASA via hostname but with IP address it does not work.Need to know what config i need to put so i am able to access it using IP by ssh and ASDM? ASA is 5520 version is 8
View 12 Replies
View Related
Mar 27, 2013
I have a new Dell Vostro 3360 with a Dell Wireless 1703 802.11b/g/n (2.4GHz) card. No internet access (wireless) from my home (other notebooks work perfect). LAN works fine. I have a AVM Fritz!Box 7360SL router at home.
On the other hand, wireless internet works fine at my lab (here : 802.11g, unsecured hotspot). Installed latest drivers and did even a clean re-installation (Windows 7 ultimate or professional) - problem remained.
View 4 Replies
View Related
Feb 10, 2013
I have a P7H55 Asus Motherboard with the ethernet port and cable working fine individually. However, when i connect them together,the ethernet light on the router remains stable as if connected but still the desktop shows not connected. This time i have installed the drivers which came from the motherboard manufacturer and are the latest. In the Network and Sharing Center, the icon is enabled. It does not show cross sign.
View 10 Replies
View Related
Dec 20, 2010
Recently added a NookColor to my toys. Works fine except at home. The device shakes hands with the router but won't connect. Nook connects seamlessly with every other network I've tried. Had my Bro-in-law over with his Anfroid based mobile devices and they won't connect either. We currently are running 4 boxes (2 @ desktop and laptop) off this router with no problems.As near as I can figure the latest firmware update (2007) can't handle the Android OS protocol and while they recognize each other they won't speak or play nice.Any options y'all know of short of replacing the router with a shiny new one ?
View 5 Replies
View Related
Dec 19, 2012
Earlier my desktop was to b in d same place where the router was der. Everything worked fine. Now I decided to shift my desktop to another room. I have kept the router at the earlier place only. I have brought a 25m long new cat 5 cable. When I connected it to my desktop, the orange led on ethernet port do not light up and the desktop is unable to detect the ethernet cable and hence the internet connection. On the router, a light of ethernet keeps on blinking every 1 second. I was worried whether my ethernet port got fried. So i inserted another ethernet cable, but then the ethernet orange light came and the pc detedted the connection. Therefore I thought the cable might be faulty. Therefore I connected my laptop with that 25m cable. But my laptop detected it and showed the internet connection. But now when i again connect the cable to my desktop, there's no light and the pc does not detect it. However, if i connect the 25m cable to my desktop then during boot the ethernet light on router is stable just as when it is normally connected to the internet. But when i go into windows it starts blinking every 1 second.
My router is MTNL Model No. UT-304R2
Desktop - Asus P7H55, core i5
Laptop- HP 2000
Windows 7 Ultimate on both desktop and laptop.
View 14 Replies
View Related
Nov 5, 2012
I've got a 3560-X that passes POST according to console, but there are issues nonetheless...USB console doesn't work. RJ45 works just fine. No status lights turn on at any point (e.g. syst, xps...). 10g network module is installed with a 10g LRM SFP. All lights on the module are amber. However, it passes according to POST. Switch passes traffic, obeys config, etc. Link lights on RJ45 ports work fine. This was brand new out of the box. Thinking about trying IOS reload..
View 6 Replies
View Related
Mar 12, 2013
Today I installed the 1.0.2.6 Firmware on a RV180W. I only have now two problems regarding the Static DHCP support in the GUI.
1. Via the Networking > LAN (Local Network) > Static DHCP I have no buttons to Add a new static Lease.
2. Via the Networking > LAN (Local Network) > DHCP Lease Clients I can thick a Lease and click on Make Static IP. The result is an error: Operation failed.
View 3 Replies
View Related
Sep 19, 2012
Basically I have a bunch of computers that are being routed through a specific gateway in order to access a web page that is hosted internally on a separate subnet. I set up static routes on all of the computers, and they all work... except one.Here's what a route print -4 looks like for a working computer (Windows 7):
Code:
===========================================================================
Interface List
14...xx xx xx xx xx xx ......Broadcom 802.11n Network Adapter
11...xx xx xx xx xx xx ......Realtek PCIe GBE Family Controller
1...........................Software Loopback Interface 1
[code]....
Both of these stations are running Windows 7.So essentially what I am trying to do here is route all traffic to the 10.zzz.zzz.0 subnet through the 10.xxx.xxx.147 gateway. Everything else should go through the 10.xxx.xxx.230 gateway. This is the intended behavior, and again it is working everywhere but that one station.
View 4 Replies
View Related
Dec 26, 2012
know any plan from Cisco to make 300 series switch to work as a DHCP server?
View 1 Replies
View Related
Feb 7, 2012
I have a Blackberry Playbook and have come into a problem with it.I can't set a Static IP on it so would setting a DHCP Reservation in my Linksys E2500 router act as a static IP?
View 2 Replies
View Related
May 28, 2012
For numerous reasons, I want to bind my DHCP clients to static IP addresses, but can't figure out how to do it in DD-WRT.
I've googled, but every link I click times out (for this specific search- my uplink is otherwise fine).
I know I can do it with hardcoded IPs, I'm just curious how static DHCP is done (and yes I am aware that Static is a contradiction in terms of DHCP. I want a given MAC to always get the same IP) and would like to have some info on this.
(call this reserved DHCP if you prefer... )
View 4 Replies
View Related
May 7, 2011
I have a machine with Windows Server 2003 running an Exchange Server in a office with 5 workstations attached. The server is being used for a basic outlook calendar across the various workstations, nothing major. Our current ISP provides us with a Static IP address. The party that installed and configured the server set it up to run the DHCP server on the server PC itself. As in, the machine running windows server is also running a software DHCP server for the entire network. THE SETUP: As of right now we have a wall port (internet access) with a cable running to a 8 port unmanaged netgear switch that has cables hooked up to the 5 workstations as well as the server itself. Pretty simple.THE QUESTION: How do I configure the ISP static settings on the DHCP Server portion of the Server PC? We may be getting a new ISP with a dynamic address OR a new static address. WHAT I'VE TRIED: I've tried configuring the IP address on the Server PC the way I would via the NIC adapter settings but it already has a internal IP address from the DHCP Server running on that PC so changing that was no good.
View 2 Replies
View Related
Aug 22, 2011
I'm totally new to using Windows Server 2003 (or any windows server edition) but I do have a basic understand of networking. I have a machine with Windows Server 2003 running an Exchange Server in a office with 5 workstations attached. The server is being used for a basic outlook calendar across the various workstations, nothing major. Our current ISP provides us with a Static IP address. The party that installed and configured the server set it up to run the DHCP server on the server PC itself. As in, the machine running windows server is also running a software DHCP server for the entire network. As of right now we have a wall port (internet access) with a cable running to a 8 port unmanaged netgear switch that has cables hooked up to the 5 workstations as well as the server itself. How do I configure the ISP static settings on the DHCP Server portion of the Server PC? We may be getting a new ISP with a dynamic address OR a new static address.
I've tried configuring the IP address on the Server PC the way I would via the NIC adapter settings but it already has a internal IP address from the DHCP Server running on that PC so changing that was no good. I guess what I'm basically looking for is a screen like this (I hope you're familiar with the configuration pages of Linksys Routers) url...
View 14 Replies
View Related
Feb 22, 2012
I have my boss's (president of the company) laptop, wired LAN port, setup with a static ip so his laptop will bypass his company's web filter, and was going to let him use the wireless for home and travel. However, what if he needs to use his LAN port on a different network that doesn't support the ip's of our company's network? I need to see if there is a way, utility, or something that can be done to allow him to have a static ip assigned to that port and use DHCP (for when he is on other networks) so he can bypass the web filter.
I have a rule on the FW to allow his static ip to bypass the web filter. I have tried the alternate configuration inside XP and editing the registry to assign that nic dual ips, but I still get blocked on the filtered webpages. For now I have just emailed him the steps on how to switch it manually.
View 4 Replies
View Related
Jan 21, 2011
My old office uses Cisco 861 as a VPN router, with the WAN side setup to receive a dynamic IP assigned by Time Warner cable. Now we switched to a new office, with TowerStream which provide 4G SLA'ed 10Mbit service with static IP, and I get a Cat 5 ethernet down from it.
So all I did, was to go my "interface FastEthernet4", and typed ip address 173.243.123.123 255.255.255.252.Changed speed to "speed 100" and "full-duplex" (as instructed by the ISP).
I also did "ip default-gateway 173.243.123.124", which is the default gate way assigned by the ISP.I also typed "ip name-server 64.17.123.123" to setup the new DNS, am I doing anything wrong? I can't even use the router to ping google, but if I connect the laptop directly to the outside line, then it works, so I know the outside line is good.
Why can't I connect to the internet? I wasted several hours already trying everything in my book to trouble shoot a supposedly very simple configuration change. Do I need to change something related to NAT when changing to Static IP? My NAT was working just fine before when under DHCP.
The below is my full config (some IPs changed to preserve anonymity):
=============================================
Building configuration...
Current configuration : 16628 bytes
!
version 12.4
no service pad
service tcp-keepalives-in
service tcp-keepalives-out
[code].....
View 29 Replies
View Related
Sep 30, 2011
Can the DHCP server on an ASA be configured with static bindings like IOS routers can?
View 2 Replies
View Related
Sep 14, 2011
My duaghter has been given an allfine netbook and I would like to connect it via wireless to my Orange livebox. I can see the livebox but cannot get a connection to browse.
View 1 Replies
View Related
Jul 7, 2012
I can't connect via wifi to my router, but can connect to the internet with an ethernet cable. However, my other computer connects via wifi without problems. I've gone through my troubleshooting and the wifi light is on, so that's not the issue. I also updated my driver (says it's working fine) and even tried to uninstall and reinstall it. I am not sure what else to do. If I try to connect via wifi though, the computer recognizes all the available networks, including my own, but just won't connect. It says a cable is unplugged (which at that time it is, because it's supposed to connect wirelessly).I have a HP Pavilion dv6-3147sb Entertainment notebook, and it uses Windows 7.
View 14 Replies
View Related
