We have found the following issue configuring radius attributes for network access with packeteer appliances.with PAcketeer-AVPair attribute , value --> access=touch Login fails and we see this
PacketShaper# radius login user password
"user" RADIUS Authentication Fail
Vendor-Specific: ccess=touch <--- value is bad
PAcketeer is not receiving vendor-specific value correctly, As workaround , we put other character before value -- xacces=touch
PacketShaper# radius login user password
"user" RADIUS Authentication OK
Vendor-Specific: access=touch
I want to add Radius attribute to Rad ware devices , so I will have the option to grant "read only" permission to users. as I understand I need to add VSA for the "read only" permission, or configure specific "Service-Type value 255"
in the following picture you can see the required information from Rad ware:
I need to add OPNET Radius attributes in ACS 4.2. How should I add a new VSA in ACS? The google search is pointing me to CSUtil.exe, and I cannot find this utility in the ACS install files. These are the values that I need added for OPNET. When configuring the RADIUS server to support the ACE Live Appliance, use the following Vendor Code and Vendor Specific Attribute (VSA): Vendor Code: 7119 VSA: 33.
I have been tasked with migrating from ACS 4 to ACS 5.3. I havent had any training and so i am finding it a bit different. Currently i have this issue -
I have a group in the ACS 4 for users accessing via wireless on the ACS - Code...
I need to add RADIUS attributes for a custom vendor under "Group Setup" page in ACS 4.2. As of now, I see Cisco Aironet RADIUS Attributes, IETF RADIUS Attributes etc in "Group Setup" page. How can I make sure that the RADIUS attributes for a vendor also appear on that page?
is there a way to have multiple instances of user custom attributes and insert those as multiple instances of the A/V Pair in the authorisation profile in ACS 5.2/5.3 ?Background: We have to migrate a ACS 4.2 to 5.3. In ACS 4.2 our client used the multiline attribute
Number #Name #Description #Type of Value #Inbound/Outbound
[code]....
to specify multiple routes to various networks in the RADIUS reply spcific for every single PPP username of routers dialing in.Using the internal user database, extended by a string attribute and using that attribute as source of a dynamic value in the access-policy works basically. But as I have only ONE single line instance of the attribute for every user, I can only return ONE framed-route.We have lots of cases where multiple routes have to be assigned to one router.I 'd like to avoid defining a seperate access profile for every remote RAS router for external PPP Dial-In...[URL]
I'm trying to dynamically assign IP address for VPN users from AD (without IAS service). I know that there is a restriction that "Dial-in users are not supported by AD in ACS (note in "acsuserguide51") but Im not exacly sure what can and can't do with it. In "Authorization Profiles" in RADIUS Attributes tab I try to mannually add specific Attribute (Framed-IP-Address).
I have no problem (everything works just fine) with static address assignment in a way as below:
AD is already integrated with ACS and I've managed to download Directory attributes especially msRADIUSFramedIPAddress
When I change "Attribute Value" from static to dynamic type I see the option to select AD (but "Select" which should list all available attributes is empty)
I know that I can do it directly (ASA <-> AD attribute mapping) but I want ACS to do it
I am setting up Radius AAA for cat6K switch.For authentication its work and user can login to switch. But for the privilege level assignment, it does not work. After loging in, I always get privilege 1. I need your guide on how to configure on ACS 5.1, RADIUS Attribute.I follow the document to configure the cisco-av-pair for assign Privilege 15 and Privilege 5 , but it does not work.This attribute format was shown in document is to set Privilege 15, "shell:privlvl=15" it is correct way of configure it on ACS 5.1
So we have multiple ISE Servers with differing personals. I was having an issue with our new ISE setup not identifying AD Group Attributes when using them in Authorization rules. We have 2- 3395 appliances running Admin and Monitoring/Troubleshooting Personas and 2- 3395 appliances running as Policy server personas. We are running v1.1.1.268 with the latest two patches. I was unable to pull Active Directory Group Attributes in any of my Authorization rules. After Resyncing all the boxes with the Primary Administration box I was able to do this. There is no bug listings for this occurrence nor do we have Smartnet to call support for other reasons.
Under 'Policy Elements/Authorization and Permissions/Network Access/Authorization profiles' I have defined a profile and the following Attribute:Attribute = F5-LTM-User-RoleType = Unsigned Integer 32Value = 300.
My question is:How can I define the same as above using 'Device Administration/Shell Profiles' ?
There is a Custom Attributes tab but I cannot figure out how to specify the 'Type' field. (Under Custom Attributes tab there is only space for 2 fields and not 3 fields).
I am trying add custom attributes for Juniper Netscreen TACACS+ authentication to a v5.2 ACS. The advice is to add it to the group as follows:
ervice = netscreen { vsys = root privilege = read-write } I know how to add this to a version v4.x ACS
However, I do not know how to apply this to the custom attribiutes to a v5.x ACS?do I add the vsys and privilege attribute seperately or together? What should be the attribute name? netscreen? Should it be mandatory?
I've been working on trying to get RADUIS authentication working for devices connecting to our corporate mobile APN. Out APN provider sends us Username & Password attributes which I can authenticate fine using ACS 5.2 but I'm having a problem using other attributes sent in the Access-Request. We have mobile SIM cards with an MSISDN value match with a physical device with an IMEI value. The SIM cards cannot be used in other devices, only their matched device. The provider passes us the MSISDN attribute under RADIUS-IETF 31 and the IMEI under a VSA of 3GPP-IMEI
What is the best way of being able to authenticate a user and match the MSISDN and IMEI associated to that user?
I'm trying to find out the options for authenticating remote users via IMEI and MISDN values via ACS 5.3/I'm unfamiliar with the Radius attribute options here and what kind of request/response we can utilise. Also previously I could define IP pools on ACS 4 but can't seem to do that now. Is there a way have ACS 5.3 to provide a DHCP server address for the connection ?
We have ASA 5520 acting as the VPN Server and Cisco 1941 router as EZVPN client. Since last few days client is not able to establish vpn connection. 1941 router is continuously generating the below log messages
001569: Jul 22 12:19:05.883 ABC: %CRYPTO-4-EZVPN_SA_LIMIT: EZVPN(VPNGROUP) Split tunnel attributes(51) greater than max allowed split attributes(50) 001574: Jul 22 12:19:07.835 ABC: %CRYPTO-6-EZVPN_CONNECTION_DOWN: (Client) User=vpn_user Group=VPNGROUP Client_public_addr=<client public ip> Server_public_addr=<server public ip> 004943: Jul 22 11:32:42.247 ABC: %IP_VFR-4-FRAG_TABLE_OVERFLOW: Dialer1: the fragment table has reached its maximum threshold 16
I have an ACS 5.3 cluster, that is configured to use AD. There are a few wireless devices, and monitoring tools that do not have AD accounts. I would like to configure ACS to first check AD for the user authentication, and if that fails to roll over to the local (Internal Users) identity source where I can define these user accounts.
It seems that when the authentication hits the initial Identity Policy rule, it never moves onto the next one if the first fails.
Attached are screen shots that show how i'm configured for the test, i have a local user defined and I'm trying to log into the firewalls.
- Identity Definition : Screen shot of the main ACS definition for the rule i'm testing that's not working - Identity Rule 1 : The configuration of rule 1 that if it fails i need it to move onto rule 2. - Log Output : Screen shot for one of the failed attempts from the ACS View Log server.
Reason I need to configure it this way is:
- Wireless users authenticate to wireless using AD user accounts. Some hand held scanners do not support that and will need to authenticate using the MAC address. - Authentication to Network devices for managment uses AD accounts. We have some monitoring tools that do not have AD accounts, and will need to be able to log into Network devices to issue some commands (Examples: Cisco Prime LMS and NCS, Infoblox NetMRI).
I am trying to configure AAA authentication and authorization with Cisco 3725 (IOS 12.4(17)) for 802.1x and ACS 4.2 with VLAN assignment to my Windows XP client. (trying to assign VLAN 100 in my scenario).When user connects to the Router, it passes the authentication process (EAP-MD5). In my debug i see that Router recieves the Radius Attributes BUT does not apply anything!My running config:
Building configuration... Current configuration : 1736 bytes ! version 12.4 service timestamps debug datetime msec service timestamps log datetime msec
[code]......
As a result the vlan-switch data based does not change.
I am struggling with configuring NPS AA for our 3750 array ... authentication and authorization. I tried almost every config i could find online but the most i got out of it is a simple authentication. What i need is quite simple: we have several AD groups.
1- Admin 2- Read only with few privileges for ping, show, trace route and telnet
I need my switches to be able to recognize the groups and assign them the correct priv. But it doesn't seem to be happening. Any clean config for the switch and for NPS ?
We have an IAS (Internet Authentication Server) to authenticate all our network devices. This server is integrated with our local AD server so that we can use our domain credentials to login into the netwoerk devices. i have successfully configured all our L2 & L3 switches with IAS but facing issue with ASA 5520. Below is the config i have applied on ASA. When i am testing the authentication with IAS server, i am getting "Authentication Successful" message.
Also when i am trying to telnet the Firewall, i am directly getting password promt. I should first get the username promt wherein i can enter my domain username.
I am trying to configure the ACS v5.x server to accept RADIUS authentication/authorization for BlueCoat ProxyAV 510's. Unfortunately, I can't seem to find any useful documentation for this. I have created a BlueCoat VSA with an Attribute of 'Blue-Coat-Authorization' with a value of '2' (Admin Access) and Type of 'Unsigned Integer' but this does not seem to work. The ACS reports that authentication has succeeded but I cannot login to the BlueCoat device and have to rely on local access.
Currently on ACS 5.2 and our MS Active Directory is migrating to a completely new domain. There will be a two way trust between them for the 24 month migration period. How best to configure ACS connect to both domains?
I am setting up an LDAP identity store over ldaps in ACS 5.1. I specify that the connection uses secure authentication and provide the Root CA certificate. When I hit "Test Bind to Server", I get this error message in a popup window: "Connection test bind Failed :server certificate not found"Is this saying that ACS can't find the CA certificate uploaded, or does it mean the actual certificate presented by my LDAPS server during the bind test?
this is the first time I am about to configure ACS 5.3 to authorize user group from doing some commands in the "configure mode" while permitting them some other commands. As example, I want to deny them from doing "reload" but give them access to configure "time-range", what happen is, they are denied access to "reload" on the exec mode, but once they went into "configure" mode, they would be able to "do reload"I mean to say, is it possible to manage the subsequent commands to "configure terminal" ?
We added AAA client in the Cisco ACS 5.0 for WLC 4402 (TACACS+ Authentication) and configured WLC 4402 to use TACACS+ authentication for the management access. We can't get this work for some reasons.
Other Cisco routers and switches all worked fine with TACACS+ authentication. This is a TACACS debug output from the WLC;
Sun Aug 23 16:19:06 2009: tplus response: type=1 seq_no=2 session_id=f59bbf0b length=15 encrypted=0 Sun Aug 23 16:19:06 2009: TPLUS_AUTHEN_STATUS_GETPASS
I have an ASA 5520 8.2(5) with ACS 5.1, I made the configutation of Authentication and is working well, now how I can configure the authorization and get into the privileged level 15 mode directly.
configuring 802.1x authentication on ACS 5.1.0.44 & Catalyst 2960S switches.All the documents i have found seem to have incorrect screen shots or missing steps.I have found a doc external to Cisco [URL]however this just hangs when attempting to complete the task in figure G.The other docs are for configuring IBNS & assume that 802.1x is already configured.
We are currently evaluating a ACS 1121 running 5.2, we are trying to configure this to Authenticate eap-peap requests.
Our users will be using credentials in a username@example.com format, if the server sees a request using username@anotherrealm.com then it would forward the request to a external proxy radius server, if the server saw a request for our domain it would strip off the @example.com part and authenticate against AD.
Im finding it hard locating documentation to tell the server if a request comes from a NAS using username@example.com then strip @example.com and authenticate username against AD.
I'm looking into starting a file sharing server (think this is what its called) which will allow people to login into one of my PC's over the internet and download my files. My goal is to allow family members and friends to access my files and only specific files on this PC. The files could be family videos as well as pictures. Some video files will be in excess of 10gb along with typical jpegs and what not. I'll probably be running windows server 2008 on it. I'm also considering allowing people on some other forums that I'm a member on (cars, hobbies, ect) and allowing people to host vids on my server. My current IP provider is Comcast and I'm on a Dynamic IP so wondering how easy this is or if its recommended I get a static IP.
I' am looking for some articles that you'd recommend on this. I'd also like to have password protection / or login criteria so car members aren't able to view all my family videos, but can only log into some folder labeled (cars) and not my folder labeled family. Or another option would be that people have to login before they are able to even see what folders are accessible.For instance car members could only see car folders Family members could see anything stored on the PC?
I'm in router setting in 1921, I have 40 remote VPN group profile attributes, but I can only connect simultaneously at 30, I wonder if there is a maximum limit of groups configured on a router 1900 IOS
we're using openldap for authorising our user to connect to the webvpn via our ASA.We'd like to rely on operational attributes to do some DAP matching. This is an example of how a user record looks in our LDAP tree:
# extended LDIF # # LDAPv3
[Code]......
Are LDAP operational attributes supported at all by the Cisco ASA?
