Cisco AAA/Identity/Nac :: Configuring BlueCoat ProxyAV 510 With ACS V5.x
Oct 9, 2012
I am trying to configure the ACS v5.x server to accept RADIUS authentication/authorization for BlueCoat ProxyAV 510's. Unfortunately, I can't seem to find any useful documentation for this. I have created a BlueCoat VSA with an Attribute of 'Blue-Coat-Authorization' with a value of '2' (Admin Access) and Type of 'Unsigned Integer' but this does not seem to work. The ACS reports that authentication has succeeded but I cannot login to the BlueCoat device and have to rely on local access.
View 4 Replies
ADVERTISEMENT
Aug 28, 2012
I have an ACS 5.3 cluster, that is configured to use AD. There are a few wireless devices, and monitoring tools that do not have AD accounts. I would like to configure ACS to first check AD for the user authentication, and if that fails to roll over to the local (Internal Users) identity source where I can define these user accounts.
It seems that when the authentication hits the initial Identity Policy rule, it never moves onto the next one if the first fails.
Attached are screen shots that show how i'm configured for the test, i have a local user defined and I'm trying to log into the firewalls.
- Identity Definition : Screen shot of the main ACS definition for the rule i'm testing that's not working
- Identity Rule 1 : The configuration of rule 1 that if it fails i need it to move onto rule 2.
- Log Output : Screen shot for one of the failed attempts from the ACS View Log server.
Reason I need to configure it this way is:
- Wireless users authenticate to wireless using AD user accounts. Some hand held scanners do not support that and will need to authenticate using the MAC address.
- Authentication to Network devices for managment uses AD accounts. We have some monitoring tools that do not have AD accounts, and will need to be able to log into Network devices to issue some commands (Examples: Cisco Prime LMS and NCS, Infoblox NetMRI).
View 4 Replies
View Related
Nov 15, 2011
I have a Blue Coat Shaper with four NIC cards. Two of them are connected, but I want to disable the other two just like a shutdown on a router or switch. Is there a command I can use to shutdown these NIC connections.
View 1 Replies
View Related
May 25, 2012
I need to roll out a Bluecoat as a WCCP for a ASA 5520.
View 3 Replies
View Related
Jan 17, 2012
Trying to configure 802.1x with ACS 5.3, have some general doubts about how to make it, this is what I got for the moment:
ACS 5.3 = 192.168.240.28
AD = 192.168.251.97
Switch = 192.168.240.171
IOS device config Already configured and running Device Administration using Tacacs, mising with Radius aaa commands:
aaa group server tacacs+ TACACS_PLUS
server 192.168.240.28
!
aaa group server radius RADIUS_1x
[Code]......
View 15 Replies
View Related
Mar 25, 2013
I am trying to configure AAA authentication and authorization with Cisco 3725 (IOS 12.4(17)) for 802.1x and ACS 4.2 with VLAN assignment to my Windows XP client. (trying to assign VLAN 100 in my scenario).When user connects to the Router, it passes the authentication process (EAP-MD5). In my debug i see that Router recieves the Radius Attributes BUT does not apply anything!My running config:
Building configuration...
Current configuration : 1736 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
[code]......
As a result the vlan-switch data based does not change.
View 3 Replies
View Related
Jan 4, 2012
I am struggling with configuring NPS AA for our 3750 array ... authentication and authorization. I tried almost every config i could find online but the most i got out of it is a simple authentication. What i need is quite simple: we have several AD groups.
1- Admin
2- Read only with few privileges for ping, show, trace route and telnet
I need my switches to be able to recognize the groups and assign them the correct priv. But it doesn't seem to be happening. Any clean config for the switch and for NPS ?
View 8 Replies
View Related
Dec 15, 2012
We have an IAS (Internet Authentication Server) to authenticate all our network devices. This server is integrated with our local AD server so that we can use our domain credentials to login into the netwoerk devices. i have successfully configured all our L2 & L3 switches with IAS but facing issue with ASA 5520. Below is the config i have applied on ASA. When i am testing the authentication with IAS server, i am getting "Authentication Successful" message.
aaa-server AAA protocol radius
aaa-server AAA host 10.91.38.70
key *****
[Code]....
Also when i am trying to telnet the Firewall, i am directly getting password promt. I should first get the username promt wherein i can enter my domain username.
View 1 Replies
View Related
Oct 9, 2012
We have found the following issue configuring radius attributes for network access with packeteer appliances.with PAcketeer-AVPair attribute , value --> access=touch Login fails and we see this
PacketShaper# radius login user password
"user" RADIUS Authentication Fail
Vendor-Specific: ccess=touch <--- value is bad
PAcketeer is not receiving vendor-specific value correctly, As workaround , we put other character before value -- xacces=touch
PacketShaper# radius login user password
"user" RADIUS Authentication OK
Vendor-Specific: access=touch
View 5 Replies
View Related
Jan 7, 2013
Currently on ACS 5.2 and our MS Active Directory is migrating to a completely new domain. There will be a two way trust between them for the 24 month migration period. How best to configure ACS connect to both domains?
View 2 Replies
View Related
Mar 15, 2012
I am setting up an LDAP identity store over ldaps in ACS 5.1. I specify that the connection uses secure authentication and provide the Root CA certificate. When I hit "Test Bind to Server", I get this error message in a popup window: "Connection test bind Failed :server certificate not found"Is this saying that ACS can't find the CA certificate uploaded, or does it mean the actual certificate presented by my LDAPS server during the bind test?
View 2 Replies
View Related
Apr 25, 2013
this is the first time I am about to configure ACS 5.3 to authorize user group from doing some commands in the "configure mode" while permitting them some other commands. As example, I want to deny them from doing "reload" but give them access to configure "time-range", what happen is, they are denied access to "reload" on the exec mode, but once they went into "configure" mode, they would be able to "do reload"I mean to say, is it possible to manage the subsequent commands to "configure terminal" ?
View 4 Replies
View Related
Aug 22, 2009
We added AAA client in the Cisco ACS 5.0 for WLC 4402 (TACACS+ Authentication) and configured WLC 4402 to use TACACS+ authentication for the management access. We can't get this work for some reasons.
Other Cisco routers and switches all worked fine with TACACS+ authentication. This is a TACACS debug output from the WLC;
Sun Aug 23 16:19:06 2009: tplus response: type=1 seq_no=2 session_id=f59bbf0b length=15 encrypted=0
Sun Aug 23 16:19:06 2009: TPLUS_AUTHEN_STATUS_GETPASS
[Code].....
View 24 Replies
View Related
Sep 10, 2012
I have an ASA 5520 8.2(5) with ACS 5.1, I made the configutation of Authentication and is working well, now how I can configure the authorization and get into the privileged level 15 mode directly.
View 6 Replies
View Related
Feb 6, 2012
I was wondering if i should use the same RADIUS VSA attribute on ACS v5.1 to authenticate AAA clients as those i was using on my old ACS v3.3 server.
Example : under ACS v3.3 i was using RADIUS (Cisco Aironet) attribute to authenticate AP & WLC, should i do the same under ACS v5.1 ?
View 2 Replies
View Related
Mar 22, 2012
configuring 802.1x authentication on ACS 5.1.0.44 & Catalyst 2960S switches.All the documents i have found seem to have incorrect screen shots or missing steps.I have found a doc external to Cisco [URL]however this just hangs when attempting to complete the task in figure G.The other docs are for configuring IBNS & assume that 802.1x is already configured.
View 1 Replies
View Related
Jul 24, 2011
We are currently evaluating a ACS 1121 running 5.2, we are trying to configure this to Authenticate eap-peap requests.
Our users will be using credentials in a username@example.com format, if the server sees a request using username@anotherrealm.com then it would forward the request to a external proxy radius server, if the server saw a request for our domain it would strip off the @example.com part and authenticate against AD.
Im finding it hard locating documentation to tell the server if a request comes from a NAS using username@example.com then strip @example.com and authenticate username against AD.
View 4 Replies
View Related
Oct 28, 2012
I'm trying to test such 802.1x wired environment:windows xp sp3 as supplicant windows NPS as radius server 2960 as authenticator latest anyconnect (3.1.01065) + nam and standalone profile editor.I have a question: What is the difference between protected identity pattern and unprotected identity pattern (set in nam profile editor)? As I understand documentation PEAP-MSCHAPv2 is a tunneled method and it uses un- protected identity pattern to protect user's identity during phase 0. But if I use any fake identity here (anonymous, anonymous@[domain], etc) access is rejected (Access-Reject in switch debugs). I have to use exacly the same pattern in unprotected identity pattern as in protected identity pattern ([username] or [username]@[domain]) to gain access, regardless of authenticaton mode (same in machine only, user only authentication).
View 1 Replies
View Related
May 18, 2011
I have a new Cisco Secure ACS 5.2 on a VM. We want to use it to for administrative access to our Cisco equipment with TACACS+. I am trying to map user permissions to different groups of devices based on active directory group membership, however it is not working.
I am using an LDAP (configured for secure authentication) external identity store. On the directory organization tab, I have confirmed the accuracy of the subject and group search base and the test configuration button shows that it's finding > 100 users and >100 groups.
On the directory groups page I have entered the groups according to the required format. cn=groupname1,ou=groups,dc=abc,dc=com
I have a rule based result selection under group mapping. I have two rules in the format below.
Conditon
LDAP:Externalgroups groupname1
Result
Identitygroup1
I have the default group set to a identity group named other. My problem is, no matter what user attempts to authenticate, the Default rule is applied, and the user is put into the other identity group.This occurs when I log on as a groupname1 user, groupname2 user, or as user that is not a member of either of those groups. LDAP authentication works and the user is able to logon to the device.
View 3 Replies
View Related
Jul 11, 2011
We are using ACS 5.2 and we are trying to create a Microsoft Active Directory (AD) Identity Store. We have a user to be used in the Active Directory creation General page and we would like to know how the test communication / ACS to AD communication takes place.
Our user is a predefined user in AD and has admin rights, but the password expires every 60 days. Will this affect the communication between AD and ACS 5.2 at everytime the entered user's password expires?
View 2 Replies
View Related
Jan 24, 2012
I'm currently looking for a solution in order to restrict the modification of the host internal identity store (add or delete MAC host) per group. The default administrator roles does not include "per group restriction". Under the ACS I defined one group per department? My objective it to allow each department to access their ACS MAC database to add or delete MAC addresses as required.
How to restrict internal identity store per group?Do I need to create new roles? and how?I was not able to get an answer from the ACS ADMIN manual.
View 1 Replies
View Related
Dec 5, 2012
I have a new ACS 5.3 configure and a ASA5550 to authenticate VPN users using a remote LDAP server. Once I try to authenticate the users with the ACS it gives me the error message "22056 Subject not found in the applicable identity store(s)."
I checked out the documentation and have already configure the Identity store sequences to redirect everything to the LDAP server, I also did the Bind test and it says that is ok, but I still have the same problem.
I validated the Access Policies Menu, and tried to create a new Service Selection Rules, but whet I get to the option of modifying the Identity option I get the error: "This System Failure occurred: {0}. Your changes have not been saved.Click OK to return to the list page. " and I'm not able to modify the identity, not in this new option I created, nor in the ones already created in the ACS.
View 8 Replies
View Related
Oct 6, 2012
I have two ACS v 5.2 (primary and secundary) and some users are in the internal stor and the others are in the AD.The local site topology is like this:
PC - AP - WLC - ACS - AD
Authentication method is PEAP(EAP-MSCHAPv2) and all user have the certificate company installed. The OS in the client users is Windows 7.Users was working fine but some users reports intranet disconnections. I see in the ACS log many "22056 Subject not found in the applicable identity store(s)." and "24415 User authentication against Active Directory failed since user's account is locked out" alarms.I believed it was because user wasn´t in the AD data base, but some times the same user is authenticated successfull and other i see the "22056...." or "24415...." alarms.
I switched the role for ACS primary to works as secundary and we see the same alarms.
View 2 Replies
View Related
Apr 14, 2011
I have ACS 5.2 running as a VM. I'm AD, then local authentication successfully for device access, but I want to define ACS user groups to restrict login. I don;t see any way to do this. If I use AD groups, they don;t show up as selection options on the policy screens, just the ACS locallyy defined groups.
View 1 Replies
View Related
Dec 3, 2012
We have a ACS 4.3.2 installed with users authenticating against an Active Directory database. The AD database not only authenticate the users but also assigns the group that is used to select IP address pool.Now the requirements require to use token authentication with SafeNet. This authentication uses the same username but the password is composed of the original password + OTP.The problem is that the SafeNet server doesn't return the group membership.I've read about the Identity Store Sequence in ACS 5.x and I think I could use it in the following sequence:! configure an Authentication Sequence using the SafeNet token server (this works with ACS 4.x)I configure an Attribute Retrieval Sequence against the AD database. This would use the username only, no password and would retrieve the group membership.
View 1 Replies
View Related
Dec 5, 2011
I'm looking for Cisco ISE v1.1 to use the following licensing feature. url...Endpoint is dynamically profiled by Cisco ISE and assigned dynamically or statically to an endpoint identity group. Cisco ISE authorization rules do not use this endpoint identity group.
View 2 Replies
View Related
May 11, 2012
I am currently running cisco ACS 5.1.0.44 and use active directory as the main authentication identity store to allow network administrators to have access to network devices in my organization .As per the established security policies in my organization , the ACS has to disable any account after 3 failed login attempts to any network devices .i have gone through all the settings oN the acs but couldn't find where or how it is done .
View 3 Replies
View Related
Feb 22, 2013
I have installed ACS 5.4 and we are looking to authenticate our Anyconnect users with ACS via Active Directory. I think I have the correct commands in our ASA ( we had ACS 4 and authenticated our anyconnect users ).
I also have configured ACS to use Active Directory and installed the server side cert in ACS. I'm just uncertain how to program ACS to use the security group that I have setup in Active Directory.
View 6 Replies
View Related
Apr 18, 2012
how profiling works exactly ?How intelligent is the profiling engine, meaning: Will it discover that one device has more than one different MACs and will merge the entries in the database ??
Example:This is in fact the same device, there is only one WLC-2500 in the network ....If it can discover that, what needs to be configured on the ISE to do that ?
View 2 Replies
View Related
Aug 27, 2012
I have setup an Identity Firewall on a ASA version 5.6 on a DMZ interface.I have installed the ADAgent on a domain member Win2008 and configured as follows: [code]
where ashdew is a domain user and ACL 122(only one line) is applied on the dmz interface and NAT is properly configured.The ADagent has been properly tested and ASA can register to it.The ASA can connect to AD DC controller and query user database.I have placed a laptop ip 172.17.h.x on the DMZ and can ping the DMZ interface.
The laptop cannot authenticate on the domain and the asa does not seem to retrieve the user identity.Do I need to add extra rules in the access-list 122 to permit trafic to DC?Can I check on the AD Agent if it can retrieve the user to ip mapping ?
View 6 Replies
View Related
Aug 15, 2012
I understand that Cisco Secure ACS 5.3 supports the integration with existing external identity repositories such as Windows Active Directory and LDAP servers. In fact, in my environment, my ACS 5.3 is now integrated with AD and RSA.My question here is can Cisco Secure ACS 5.3 integrate with "multiple" WIndows AD, LDAP, RSA Server etc.? if yes, is there a Cisco document stating this? The keyword here is multipple.
View 4 Replies
View Related
Sep 25, 2011
I am trying to setup PEAP authentication for wireless users but I got stuck at place where I have single ssid and users are store in different identity stores like some will be using their active directory and some are locally created users on ACS. I created separate service for wireless authentication and under that I am unable to create rule to differentiate them with identity stores. any idea how to achieve this.
I tried creating identity selection based on role but it does not work as for protocol like radius.peap,ms-chap ACS does not look for another identity store once user not find in an identity stores.
View 1 Replies
View Related
May 19, 2013
After clicking on below path we are not getting option as should be reflected. Below is the snapshots for the issues.
Access Policies > Access Services > Default Device Admin > Identity
View 3 Replies
View Related
