Cisco AAA/Identity/Nac :: Can't Add AD Groups In ACS 5.2
Jul 21, 2011
I've run into an annoying issue with my ACS 5.2 install. I can no longer add directory groups in the AD settings, the ACS comes back with "The item you are trying to delete is referenced by other items.You must remove all references to this item before it can be deleted." but I am not deleting any group, just adding.
Could probably be cleared with removing the AD setup completely, which for obvious reasons is not something I want to do.
I have ACS 5.2 running as a VM. I'm AD, then local authentication successfully for device access, but I want to define ACS user groups to restrict login. I don;t see any way to do this. If I use AD groups, they don;t show up as selection options on the policy screens, just the ACS locallyy defined groups.
We are running two ACS appliances but we cannot figure out how we can add a user into 2 differents groups.Here's the context :We have a company A which is having devices, this company uses Group A.then we have a company B which is having devices, this company uses Group B.But the admin has to manage the devices for both companies A & B.We don't want to mix devices from company A with company B.Is there a way to add the user into both groups A & B.
I have seen similar references to this issue, but no concrete solutions. My new ACS appears to join my domain with little or no issues, however, when I go to list the groups nothing is ever listed.Running ACS as a vm.I have set the ntp server on the ACS server to match my domain.I can ping all domain controllers/DNS servers.nslookup resolves hostnames of my domain controllers
***Update***
I verified that a computer account for my ACS is in fact being created, however, I am receiving some Kerberos errors on my DC with the FSMO roles:
Description:While processing an AS request for target service krbtgt, the account <ACS SERVER> did not have a suitable key for generating a Kerberos ticket (the missing key has an ID of 1). The requested etypes were 17. The accounts available etypes were 23 -133 -128 3 1.
I have an ACS 5.1 and am trying to integrate with windows 2008 R1. The ACS has a valid AD account and indicates that its connected but when I try to list any directory groups my windows IE browser hangs?
Recently I've been working with the ACS 5.2 (Installed on VMWare). At the beginning I was using a Win Server 2003 Enterprise edition AD, and there was no problem with the AD and the CA Authority. Because some of my customers use Win Server 2008 I change the AD platform to Win Server 2008 Enterprise edition (x64).I don't really have a great experience with Win Server Platforms and, for what I've seen, the Win Server 2003 Services deployment is easier than the Win Server 2008 is.
So, when I used the Win server 2003 I could not only synchronize the ACS with the AD but also use some groups created on the AD to perform the Network Access Authentication. When I try to do the same with the Win Server 2008 AD the ACS and the Server get Synchronized but when I want to add the groups for the Authentication purposes there is no one, absolutely nothing... so I cannot do any test.Also I looked for information about the compatibility between the ACS 5.2 and the Win Server 2008 platforms and at the end the platforms are compatibles.
I have been tasked with migrating from ACS 4 to ACS 5.3. I havent had any training and so i am finding it a bit different. Currently i have this issue -
I have a group in the ACS 4 for users accessing via wireless on the ACS - Code...
I'm trying to setup ACS 5.2 with an ASA v8.3.2 to lock users into VPN groups based on a users AD group. I've tried various combinations but the group lock isn't working. I've done steps 1 & 2 ...
1) Network Devices and AAA Clients -> Define VPN
2) Users and Identity Stores -> Setup AD and Directory Groups, test connection
Policy Elements:
Q1) Policy Elements - Do I need an authorization profile for each group:
Q2) What RADIUS attributes should I use to match my ASA tunnel-groups?
I am trying to set up RA VPN on ASA 8.4 with 2 groups - VPNGp1 and VPNGp2. VPNGp1 users will access 1.2.3.0/24 and VPNGp2 users will access 5.6.7.0/24. User authentication will happen using ACS 5.3 Radius.
On ASA, I have configured the IP pools, VPN ACLs, VPN groups, group policies for each group, and tunnel groups.
On ACS, I have created vpn-user1 and vpn-user2 for each of 2 groups.
I am not sure if some more configuration needs to be done on ASA and ACS... Do I need to add new users - vpn-user1 and vpn-user2 - on ASA, under each corresponding group policy, using vpn-group-policy command? Or I need to do something else on ACS?
Lastly, how can I configure authorization and accounting for the VPN users? Do I need to do this on ACS or on ASA?
I have multiple campuses and a Central Admin...I've created Groups for all, except I need a few devices within Central to be available to the Campus Admins... (ie..a Cisco WCS System) How do I allow a device to be put into multiple NDG groups?
We are running ACS 4.0 so understandably so we are looking to upgrading to a Cisco supportable version of ACS. The limitation of our current version of ACS does not support nested AD groups. The latest version of ACS (I think it is 5.4) will?
I am using ACS 5.3 What I am about is setting user authentication against existence of the user in specific AD group, not just being a member in any AD. What is happening now, users get authenticated as long as they exists in the AD, luckily they fail on authorization, as it is bound to specific AD group.
how can I bind the authentication aginst specific group in AD, not just using AD1 as the identity source.
I created some User Defined Groups in LMS 4.1, now I want to apply certain fault notification groups to Event Sets.
Unfortunately the Groups I configured are not in the Group Selector of the Fault Notification Group: Admin > Network > Notification and Action Settings > Fault Notification Group
I'm working with a 1113 ACS device running the 4.2.0.124 software. I'm trying to get multiple network device groups to use an existing Remote Agent set up for authentication against our Windows domain. For instance, we want our infrastructure switches to authenticate agains the local Active Directory and our WLC to authenticate users agains the same Active Directory. When I try and set both network device groups to use the same remote agent, it fails and reports either the host name is already in use or the IP address overlaps with an existing remote agent.
The question is:
Can I have multiple network device groups use the same remote agent? Or do I have to install the remote agent software on separate Windows servers in order to have different types of devices authenticate against the Windows AD?
Is it possible to assign a single ssid to multiple interface groups by assigning the ssid to multiple AP groups?
I have buildings geographically dispersed that are configured with multiple vlans in interface groups so that I can maintain an addressing scheme of dhcp assigned addresses per building. Each building is also further grouped as AP groups. I'd like to know if by assigning the same wlan ssid to each of the AP groups, will I maintain addressing integrity for each building? I'm thinking it will work.
Do the buildings have to be outside AP range of each other to avoid problems?
I have Cisco LMS 4.0, I have a few tasks which are scheduler every friday and they failed last week. This morning I would like to restart them but I cannon see the devices in my Groups.Under Inventory -> Manage Device State -> User Definied Groups -> I can see my groups but they are empty!I restarted the server and crmdmgtd service but it's not better.
I has got a 8 system(Say Node1, Node2,.....,Node7,Node8) in my LAN Network.i Want a Group a 8 System's in Such a way that Node 2 Should Ping with Node1,Node3 Node4, But not with Node 5,Node 6,Node 7,Node 8.
Is it possible on an Cisco Router to build WebVPN groups ? I want build one group for users with grand access rights.
--> Connect with anyconnect or Web Portal and have access to all Servers on 10.0.0.0 Network.
And another group for users with limited access priveleges.
--> Connect with anyconnect or Web Portal and can access only Server 10.0.0.10 Port XXXX and Server 10.0.0.20 on Port XXXX Info: i have an 881GW Router.
Have a setup for Cisco LMS3.2.1 which is a recent upgrade, also RME 4.3.2 and CM 5.2.2. Is it possible for the DFM to generate alerts such as email notification to user defined group (subnet grouped). These alerts should be critical in in nature.
I have a new deployment of 44 3502i AP's in 3 buildings at one of my campus'.The 5508 wlc is running latest 7.0.116.0 code.I have some users who take their work with them as they go from location to location on this campus.They need to be able to smoothly switch from AP to AP without having to reauthenticate each time the next AP takes over in the handoff.On the ssid in question we run 802.1x back to 1 auth server; there is no failover auth server.All APs are in one AP Group.My thought is to add all 44 of the APs to one HREAP Group.
I have seen some discussion in the forums regarding user defined groups being empty in LMS 4.0 but not 4.1. I am having this issue in 4.1. Under User Defined groups, I have created 2 logical groups named "Physical Location" and "Switches". These do not contain any actual devices, they are just containers for other groups. Under the Physical Location logical group I have created 2 other groups, Acuna and Hampton. Under the Switches group I have also created 2 groups, HDM and HHC. The criterion for the Physical Location group is based on the first 3 characters of the hostname:
Device.System.Name startswith "hdm"
The criterion for the Switches group is based on the value of a user defined field, Admin_responsibility:
Device.Admin_responsibility equals "HDM"
The Physical Location groups work - the Switches group does not. Both the HDM and the HHC group should contain several devices. The HDM group contains 2, the HHC contains none. If I edit the groups and click "next" until I get to step 3, Membership: Edit, the "objects matching criteria" list is fully populated - it contains the devices that it should contain. However, after I click "Finish" and go to Inventory => Add / Import / Manage Devices there is no change in group membership - the HDM group contains 2 devices and the HHC group contains none.
I am trying to setup Fault Monitoring on LMS 4.0. When I try to create a Fault Notification Group no devices are listed. They appear to be listed in all other places so I am at a loss as to explain why they are not appearing.
1) Is it possible for 2 WLCs installed in seperate data centres with L3 seperation to be joined in a mobility group? We will have aps in the branch offices split between controllers so we want to make sure roaming work ok. Also all guest access should be anchored to data centre 2.
2) in flexconnect local switching mode, do I need to create flexconnect groups if I'm only using radius servers in the data centre with no requirement to use local radius as a backup?
I am trying to configure multiple dsl-groups on a HWIC-4SDHSL-E module and the option does not exist. According to the Cisco documentation I should be able to do this, but I only get pairs as an option.
1921(config-controller)#dsl-group ? pairs Link number <cr>
[URL]
This is what I am trying to do which I have done before on the 1841.
configured 2 EzVPN groups using a 2811 router, i am trying to do this but is not working i have another VPN working thru EzVPN but if i try to configure another group for another EzVPN client is not working and the problem is that the debug crypto isakmp say that Apr 3 08:45:25.802: ISAKMP:(1309): phase 2 SA policy not acceptable!
How is that possible? in my understand the EzVPN server will inject the the IKE (phase 1) and IPSec (Phase 2) parameters for the client and that's they dont need to negotiate nothing, is important to say that the EzVPN client is an ASA5505 with onlu DES encryption enabled, 3DES and AES are not available due to licensing reasons.
Is it possible somehow to define externally administred DNS namese in ASA 8.4 in within object groups?i know that we can use name XXX, but some idea popped up using this kind of configuration.
I'm in the process of reconfiguring our DFM module have some significant network changes. I've reinitialized the modules databases and manually imported a test group of routers into DFMs device management. The devices have been found and have a known status in the device summary.When I begin the process to create a notification group for email based notifications, the notification group selection window shows no devices available. If I manually search for the devices, I am able to find them, but after selecting them, I'm given the following error:"The devices contaminated in the subscription are no longer found in the inventory"I've confirmed the devices existence in CS and RME.
I have a Cisco Flex 7500 in my datacenter and I need to connect 100 sites , each site with 2-3 APs , each side has its own network and is independent of other sites , the site only need to comunity locally and do not need to access any centralized applications.
I am trying to achieve this by Creating 100 different AP groups and assiging 2-3 AP in each groups for each branch, I will achieve WAN failover resiliency by creating flexconnect groug , the issue I am facing are as below .
1.Since all the sites has same setup , the AP and clients on all sites are in vlan 2 , so when I try to create 2 or more AP group with same vlan, it restricts me of doing so , I cannot create diffrent AP groups mapped to same Vlan . 2.If I keep the APs and Clients in the same subnet , I dont think it should be a problem , but I need your second opinion.
to give you an even better picture , look at the topology enclosed , and my question is if both STAFF and STUDENT APs are in same vlan but in 2 different broadcast domain , how would I create the AP groups.
how to change the order of the groups that are displayed at the SSL VPN sign in page? I am using an ASA-5520. Right now the anyconnect client group displays above the clientless SSL intranet group and I want it reversed.